Medžiagų Lentyna pirkti naudotą (5 112)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm Fedpfxoguk Dke Ac Dsga - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Fgedpfsmhhy Njx Ac Doa Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany Fsdpfx Ajmhh Dtoc Dega - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Fgjdpfx Aceguk Dvj Dja The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: naudotas, rida: 131 484 km, galia: 338 kW (459,55 AG), pirmoji registracija: 11/2023, kuro tipas: dyzelinas, tuščias svoris: 8 027 kg, didžiausias leistinas svoris: 9 973 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 3 600 mm, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: oras, sėdimų vietų skaičius: 2, Gamybos metai: 2023, Įranga: ABS, autonominis šildytuvas, borto kompiuteris, diferencialo užraktas, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, trauki kontrolė,

Būklė: naudotas, rida: 148 273 km, galia: 338 kW (459,55 AG), pirmoji registracija: 11/2023, kuro tipas: dyzelinas, tuščias svoris: 8 431 kg, didžiausias leistinas svoris: 9 569 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 3 750 mm, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 2, Gamybos metai: 2023, Įranga: ABS, autonominis šildytuvas, borto kompiuteris, diferencialo užraktas, hidraulika, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, trauki kontrolė,

Būklė: naudotas, rida: 173 874 km, galia: 338 kW (459,55 AG), pirmoji registracija: 01/2024, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 3 750 mm, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 2, Įranga: ABS, autonominis šildytuvas, diferencialo užraktas, kruizo kontrolė, oro kondicionavimas,

Būklė: naudotas, rida: 524 600 km, galia: 335 kW (455,47 AG), pirmoji registracija: 07/2020, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Įranga: ABS, autonominis šildytuvas, oro kondicionavimas, suodžių filtras,

Būklė: naudotas, rida: 460 000 km, galia: 330 kW (448,67 AG), pirmoji registracija: 04/2018, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, stabdžiai: retarderis, spalva: balta, pavaros tipas: automatinis, emisijos klasė: Euro 6, Gamybos metai: 2018, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), oro kondicionavimas,

Būklė: geras (naudotas), Kiekvienos lentynos stiklo padėtis: 65 mm Maksimalus stiklo aukštis: 1680 mm Plotis: 1500 mm Gylis: 2600 mm Fedpfxjyx Uf Ss Ac Doga Aukštis: 2060 mm Būklė: Geras, naudotas

Būklė: geras (naudotas), Rėmai: 8860x1050x80 mm – 34 vnt. 3000x1050 mm – 7 vnt. Sijos: 1860x75x45 mm (2800 kg/lentynai) – 352 vnt. 2760x115x40 mm (2400 kg/lentynai) – 26 vnt. 2700x100x50 mm (2400 kg/lentynai) – 22 vnt. Galima įsigyti ir dalinius kiekius. Fedod Hbqnepfx Ac Doga Jei jums reikia lentynų ar priedų kitokių komplektacijų ar variantų, susisiekite su mumis. Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime Jūsų planavime. Individualus, Jūsų poreikiams pritaikytas pasiūlymas mums yra savaime suprantamas dalykas. Siuntimas: Prašome teirautis dėl siuntimo kainos, nurodydami savo pašto kodą, miestą bei pageidaujamą prekių kiekį.

Būklė: geras (naudotas), galia: 140 kW (190,35 AG), kuro tipas: dyzelinas, spalva: geltonas, Gamybos metai: 2009, veikimo valandos: 15 423 h, Įranga: oro kondicionavimas, Bendra informacija Tinkama naudoti medžiaga: atliekos Serijos numeris: CATM325DCKAY00278 Pavaros sistema Pavara: ratai Variklio markė: C7DI Svoris Fedpfx Asyzl Euoc Djga Tuščias svoris: 36 000 kg Funkcionalumas CE ženklinimas: taip Būklė Techninė būklė: gera Vizualinė būklė: gera Papildoma informacija Didžiosios kaušo/strėlės ilgis: 745 cm Padangų dydis: 23.5R25 Emisijos lygis: Stage IIIA / Tier III Pristatymo sąlygos: EXW Transportavimo matmenys (I x P x A): 12x3,25x3,8 Gamybos šalis: BE Papildoma informacija Dėl platesnės informacijos kreipkitės į Jeroen Heindryckx, Bart Apers arba Matthias Eyckmans. = Kitos parinktys ir priedai = - Strėlė su sprogimo vožtuvu -> Apsauginis sprogimo vožtuvas – Strėlė / gervė - Automatinė tepimo sistema - Akumuliatoriaus atjungimo jungiklis - Plaktuko/kirpimo hidraulika - Šlaito hidraulika - Didysis kaušas su sprogimo vožtuvu -> Apsauginis sprogimo vožtuvas – Didysis kaušas/strėlė - Kabinos tipas: pakeliama / su kėlimo mechanizmu - Atraminiai kojeliai

Būklė: naudotas, rida: 586 000 km, galia: 368 kW (500,34 AG), pirmoji registracija: 02/2023, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 3 750 mm, spalva: balta, vairuotojo kabina: kitas, pavaros tipas: automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 2, Įranga: ABS, autonominis šildytuvas, diferencialo užraktas, kruizo kontrolė, oro kondicionavimas,

Gamybos metai: 2006, būklė: naudotas, Svoris be apkrovos: 2.000 kg Matmenys (I x P x A): 210 x 240 x 210 cm - Pagaminimo metai: 2006 - Dokumentacija prieinama: Ne - CE sertifikatas yra: Ne - Transportavimo matmenys: 2100 mm x 2400 mm x 2100 mm (i x p x a) - Transportavimo svoris [kg]: 2000 kg Fsdpfx Ajwh I Edec Dsga - Transportavimo paketų [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/ar diferencijuotas apmokestinimas: PVM gali būti atskaičiuotas juridiniams asmenims Pristatymas ir priėmimas mainais galimi bet kuriuo metu visai pramonės įrangai. Yorick Diebels

Būklė: naudotas, rida: 30 000 km, galia: 375 kW (509,86 AG), pirmoji registracija: 11/2025, kuro tipas: dyzelinas, bendras svoris: 18 000 kg, ašių konfigūracija: 2 ašys, stabdžiai: retarderis, spalva: pilkas, pavaros tipas: automatinis, emisijos klasė: Euro 6, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), navigacijos sistema, suodžių filtras,

Būklė: geras (naudotas), Gamybos metai: 2013, Hazardous materials container, REI 90 / F 90 fire-resistant storage, type WFP, cantilever racks, interior lighting, access ramp, leakage sensor – used –: Price ex location: €29,500 (net), dismantled, packaged and loaded, plus transport and reassembly! Manufacturer: Denios Year of manufacture: 2013 Model: BMC-X 600-K-T90-2 Type: REI 90 / F 90 fire protection storage WFP-X 14 Surface room system External coating RAL 9002 grey white Internal coating RAL 9002 grey white Door coating (both sides) RAL 9002 grey white Dimensions Internal | External (without attachments) Width (mm): 2,560 | 2,952 Depth (mm): 5,500 | 5,938 Height (mm): 2,500 | 2,924 Collection volume Sump tray collection volume: 1,560 litres Door arrangement: short side Stainless steel door handle with anti-panic feature: 1 pc Technical ventilation fire protection system: 1 pc Exhaust air monitoring: 1 pc Door hold-open device, single-leaf door: 1 pc Pallet truck-accessible grating WFP 14: 1 pc Cantilever rack: 8 pcs Explosion-proof interior lighting, 42 W LED: 1 pc Steel pallet truck ramp: 1 pc Surge protection: 1 pc Leakage sensor SpillGuard Connect: 1 pc Emergency exit sign (fluorescent): 1 pc Control unit: 1 pc • Safety storage for water-polluting substances (WGK 1–3) as well as flammable, toxic, and oxidizing media according to GHS • Roof and side walls from fireproof cladding (EI120) with fire protection both inside and outside. Floor area fire protection via suitable site-specific sub-base • Roof drainage via integrated guttering with internal downpipes at each short side • Manufactured according to DIN EN 1090-2 Fgsdpfx Aeyzc Dhsc Doa • Flexible indoor or outdoor installation possible on a concrete surface • Frame construction to meet static requirements • Constructive equipotential bonding by grounding the steel framework • Hot-dip galvanized sump tray made from S235JR steel (mat. no. 1.0038) to DIN EN 10025, 5 mm material thickness, at least 5 years corrosion protection • Sump tray tightness tested to EN ISO 3452-1 with factory test certificate • No floor clearance. No underpass facility for industrial trucks • Front-end lugs for fixing the room system to the concrete base • Corrosivity class C3-M according to DIN EN 12944, Part 1 • Single-color 2K-PUR paint in RAL color tone • Self-closing fire protection door with overhead door closer and anti-panic handle set, lockable by profile cylinder with Euro-profile 17 mm • Convenient access via low door threshold of 147 mm • Storage areas with hot-dip galvanized, removable grating shelves • Removable transport brackets on the roof area II 2(1) Ex emb[ia] IIC T6) Cantilever racks Interior lighting Access ramp Leakage sensor SpillGuard Connect Original new price: €49,000 Condition: good – very good, No spills, only stored with sealed containers. Available: immediately Location: 79312 Emmendingen Comprehensive offer details available as PDF upon request.

Būklė: naujas, Gamybos metai: 2020, Cantilever Racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Centre distance: 131 cm - NEW - immediately available from stock. - 750 kg load per arm Fgsdpfx Ajyzq Hqoc Dsa - 2250 kg load per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: Base + 3 storage levels (4 storage levels in total) Rack consists of: - 04 x uprights, incl. base approx. 300 cm made from IPE160 - 12 x cantilever arms approx. 120 cm made from IPE 100 - Incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racking? - Certified German manufacturer in accordance with DIN EN 1090 - Made in Germany - All specified load capacities of uprights and arms are statically verifiable at 100% capacity - All racks supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use without rusting unlike painted racks. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term post-purchase guarantee - The upright base and upright rear are welded together, providing added safety and fast installation since the feet do not need to be bolted to the rear - Bracing made from angle steel, so no adjustment via turnbuckles is necessary. This reduces installation time. - No slotted hole system, preventing weakening of the upright profile Price: €2,404.00 net + applicable VAT. You will receive an invoice with VAT shown. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery available through our partner shipping company on request; cost depends on postcode. Assembly: Our trained staff are happy to professionally assemble and dismantle your equipment if required. Our recommendation: Tell us your requirements ... We are happy to assist you with your project, from planning and ordering to installation.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia vienai konsolės svirčiai: 140 kg, lentynos aukštis: 2 500 mm, bendras ilgis: 3 150 mm, bendras aukštis: 2 500 mm, ašių atstumas: 1 030 mm, apkrova vienai atramai: 1 120 kg, Approx. 3.15 linear meters Cantilever Racking with Shelves 60cm Deep H: 250 cm 140 kg/arm META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle dimension: 103 cm - NEW – immediately available from stock. Fgodpfx Acoyzq Hds Doa - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights painted in RAL5010 (gentian blue). - Cantilever arms painted in RAL5010 (gentian blue). - Arms are hooked in and secured with locking pins. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels total) Rack consists of: - 04 x Uprights, incl. base approx. 250 cm from IPE120 - 16 x Cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm - 12 x META shelves, approx. 100 x 60 cm - Including all necessary connectors and bolts -- Immediately available -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery can be arranged on request by our partner shipping company, with costs depending on postcode. Assembly: Our trained staff will gladly assist you with professional assembly and disassembly of your warehouse equipment. Our recommendation: Let us know your requirements... We are happy to assist you from planning through ordering to installation to help realize your projects.

Būklė: naujas, Cantilever Rack New H: 400cm, Base + 3 storage levels with roof & back wall Delivery free to anywhere in Germany, except islands. Specifications: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1420 cm - Cantilever arms: approx. 125 cm - Axle spacing: 290 cm (customizable upon request) - New product – made in Germany - Delivery time: approx. 6 weeks after commercial clarification - Load capacity per arm: 1000 kg - Load capacity per upright: 4000 kg - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Adjustable arms in 200 mm increments - Levels: base + 3 storage levels (4 storage levels in total) The rack consists of: - 6 x uprights incl. base, approx. 400 cm, made from IPE270 - 18 x cantilever arms, approx. 125 cm, made from IPE120 - 6 x roof beams, approx. 150 cm, made from IPE120, with 5° rising roof pitch - Incl. roof and back wall material - Incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities for the uprights and cantilever arms are statically certified at 100% load - All racking systems are delivered in a hot-dip galvanized finish. This means they can be installed indoors or outdoors and will not rust like painted systems. Consistent appearance for many years - We use the legally required hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term spare parts guarantee - Upright base and rear are welded together, providing added safety and reduced assembly time, as the bases do not need to be bolted to the rear upright - Bracing made of angle steel, eliminating the need for turnbuckles. This reduces assembly time - No slotted hole system, thus no weakening of the upright profile Price: €12,250.00 net Plus statutory VAT. You will receive an invoice with indicated VAT. Assembly: Our trained staff are happy to provide professional assembly and disassembly of your warehouse equipment if required. Our recommendation: Fsdpfx Aceyzq Eys Doga Let us know your requirements... We are happy to assist you with the realization of your projects, from planning and ordering to assembly.

Būklė: naujas, Gamybos metai: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW STOCK, immediately available from stock. - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 storage levels) Rack includes: Fgedpfjyzq Etex Ac Doa - 4 x uprights incl. base, approx. 350 cm made from IPE160 - 12 x cantilever arms, approx. 120 cm made from IPE 80 - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All stated load capacities for uprights and cantilever arms are statically proven at 100% load. - All rack systems are supplied hot-dip galvanized, suitable for both indoor and outdoor use, and do not rust like painted systems – ensuring consistent appearance for many years. - We use the legally required hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long purchase guarantee - Upright base and upright rear are welded together for additional safety and reduced assembly times, as the bases do not need to be bolted separately to the uprights. - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, which reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,356.00 net + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery is available upon request via our partner freight forwarder, costs are dependent on postal code. Assembly: Our trained personnel are happy to assist you with professional assembly and disassembly of your facility if required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects – from planning to ordering to installation.

Būklė: naujas, Cantilever Rack Double-Sided New Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle distance: approx. 131 cm - New item from factory - Double-sided - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 4 storage levels (5 storage levels in total) - Delivery time approx. 4 weeks Rack consists of: - 15 x double-sided uprights incl. base, approx. 400 cm made from IPE 160 steel - 120 x cantilever arms approx. 120 cm made from IPE 80 steel, without stop end - Incl. all necessary connectors and bolts Why Choose BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the rack uprights and arms are statically verified at 100% loading. - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, will not rust like painted systems. Consistent appearance for many years. - We use legally compliant hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term spare parts availability guarantee - Upright base and rear are welded together for additional safety and shorter assembly times – no need to bolt the feet to the upright backs. - Bracing made from angle steel, so no adjustment by turnbuckles necessary, reducing assembly time. - No slotted hole system, so no weakening of the upright profile. Price: €12,450.00 net plus legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Fgjdpeyzq Emefx Ac Doa Delivery by our partner forwarding agent on request. Costs depend on postal code. Assembly: Our trained personnel are available to professionally assemble and dismantle your equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering through to assembly.

Būklė: naujas, Cantilever racking systems made to measure! Ideal for storing long goods. Easy access to your products thanks to configurations that can be used on one or both sides. Expandable system, allowing you to add components as your needs develop. Perfect for offcuts or long materials in metalworking and woodworking operations. Why choose BLT Cantilever Racks? • Certified German manufacturer according to DIN EN 1090 – Made in Germany • All stated load capacities for uprights and arms are statically verified at 100% load! • All rack systems are supplied in hot-dip galvanized finish, allowing for indoor and outdoor use without risk of corrosion as with painted racks. Consistent appearance for many years. • We use legally required hot-dip galvanized bolt sets pursuant to DIN EN 15048-1 • We use legally required load signs type C4 according to DIN EN 15635 / BGR 234 • Long-term spare parts availability guaranteed • Upright base and upright spine are welded together for added safety and reduced assembly times, as the base does not need to be bolted to the spine. • Bracing made from angle steel – no tension rods needed, shortening installation times. • No slotted hole system – no weakening of the upright profile. Transport: Delivery is available via our partner freight forwarder; costs depend on postcode. Assembly: Our trained staff are available on request to professionally assemble and disassemble your warehouse equipment. Our recommendation: Let us know your requirements… We are happy to support your project from planning and ordering through to installation. Interested or have questions? Fjdpoyzq Egefx Ac Dsga Simply contact us by message or phone. Our telephone number is listed on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 15:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, keliamoji galia vienai konsolės svirčiai: 140 kg, lentynos aukštis: 2 500 mm, bendras ilgis: 3 150 mm, bendras plotis: 810 mm, bendras aukštis: 2 500 mm, ašių atstumas: 1 030 mm, apkrova vienai atramai: 560 kg, Approx. 3.15 linear meters Cantilever Rack H: 250 cm 140 kg/arm META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle spacing: 103 cm - NEW ITEM immediately available from stock. Fgodpfx Acoyzq D No Doa - 140 kg load capacity per arm - 1120 kg load capacity per upright - Uprights in RAL5010 (gentian blue) - Cantilever arms in RAL5010 (gentian blue) - Arms are hooked in and secured with locking pins - Arms adjustable in 70 mm increments - Levels: Base + 4 storage levels (5 storage levels total) The rack consists of: - 04 x uprights, incl. base approx. 250 cm made of IPE120 - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm - Incl. all necessary connecting elements and bolts -- Immediately Available -- Price: €1,525.00 net €1,814.75 gross You will receive an invoice with shown VAT. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Transport: Delivery available on request by our partner freight forwarder. Shipping costs depend on postal code. Assembly: Our trained staff are happy to professionally assist you with the assembly and disassembly of your business equipment as needed. Our recommendation: Let us know your requirements... We are happy to assist you with your project—from planning to order to assembly.

Būklė: naujas, Gamybos metai: 2020, Cantilever Rack – NEW STOCK Specifications: Fsdoyzq D Ajpfx Ac Djga - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Pitch: 131 cm - NEW STOCK, available immediately from stock. - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels) Rack includes: - 04 x uprights incl. base, approx. 416 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE80 - Includes all necessary connecting elements and bolts Why choose BLT Cantilever Racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically certified at 100% capacity - All racks are supplied with hot-dip galvanized finish; suitable for indoor and outdoor use, will not rust like powder-coated systems, maintaining appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term replacement parts warranty - Upright foot and upright back are welded together for added safety and reduced assembly time (no need to bolt foot to upright back) - Bracing made of angle steel, eliminating the need for adjustable tension rods and reducing assembly time - No slotted holes, so upright profiles are not weakened Price: €2,578.00 net + statutory VAT You will receive an invoice with VAT shown separately Accessories such as floor anchors, collision protection, etc. are also available Transport: Delivery available nationwide via our partner freight forwarder, costs depend on postal code Assembly: Our trained personnel will professionally assist with assembly and disassembly of your facility if required Our recommendation: Tell us about your requirements… We are happy to assist in realizing your projects – from planning to ordering to installation

Būklė: naujas, Gamybos metai: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW STOCK available immediately from stock. - Load capacity per arm: 500 kg - Load capacity per upright: 2250 kg - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: base + 3 storage levels (4 storage levels total) Fgsdpfxeyzq Dve Ac Dsa Racking consists of: - 04 x uprights, incl. base, approx. 300 cm made of IPE 160 - 12 x cantilever arms, approx. 120 cm, made of IPE 80 - Incl. all necessary connecting elements and bolts Why choose BLT Cantilever Racking? - Certified German manufacturer DIN EN 1090 - Made in Germany - All stated load capacities for uprights and arms are statically verified at 100% load - All racking systems supplied in hot-dip galvanized finish. Suitable for indoor and outdoor use, will not rust like painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt assemblies according to DIN EN 15048-1 - Long-term aftersales guarantee - Upright foot and upright back are factory welded together, offering additional safety and shorter installation times, as they do not require separate bolting - Bracing made from angle steel; no tension rods required, reducing installation time - No slotted hole system, thus no weakening of upright profiles Price: €2,265.00 net plus applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged via our partner haulier on request. Costs depend on your postal code. Assembly: Our trained personnel are available to assist with professional installation and dismantling of your warehouse equipment as required. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly.