Martin Transline 1228 pirkti naudotą (95)

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Fedpfx Ahjqlck Njregd Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available - Fedeqlckpepfx Ahregd

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Fgsdpfxspgkmwo Ahred Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° Fodpfx Ahspq If Djrogd - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Būklė: geras (naudotas), Gamybos metai: 1982, Naudota storio obliavimo staklė Gebr. Martin, tipas: T 42 Pagaminimo metai: 1982 Obliavimo plotis: 630 mm Obliavimo aukštis: 250 mm Padavimo greitis: 8-20 m/min Nusiurbimo jungtis: 160 mm Svoris: apie 870 kg Gumuoti įvado ir išvado volai Dvivietis peilių velenas su tiesiais obliavimo peiliais Centrinis tepimas Obliavimo aukštis reguliuojamas rankiniu ratuku Žvaigždės–trikampio jungiklis Fsdpfx Ahet U Rn Sorjgd Vieta: sandėlyje 54634 Bitburg - galima iš karto -

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m Fgjdpfx Ahsv Erkasrod T 6635/3-a Cutting width 1350 mm T 6641-a Parallel fence operated by handwheel T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 77 - new stock machine - Top features - Double-sided tilting - Equipment: T 7710/2-a Saw Unit Prex - tiltable on both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Stepless drive power 5.5 kW T 7730/4-a Sliding table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled rip fence, can be lowered into end position T 7755-a 3-axis scoring unit T 7757-a Scoring saw lighting Safe Light T 777572-a Angle cutting system RadioCompens with continuous fence T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable safety hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at Classic operating level Fgedpfx Ajw D T Dkjhrsd Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control unit makes setting the planing height very simple, with 99 storable planing dimensions for perfect results from the first workpiece. The thickness table can be easily moved by pressing a button, or adjusted upwards in 0.1 mm increments. All feed speed controls are within comfortable reach. The heavy, vibration-damping composite frame combined with the high-quality cutterblock bearings ensures excellent surface results. Thanks to the sound-insulating construction, quiet operation is guaranteed even in standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Cutterblock speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; pushbuttons for manual coarse and fine adjustment of planing thickness with digital display, start/stop button for cutterblock, integrated hour counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; includes block locking for easy knife change • Thicknessing table: Electric height adjustment with fine adjustment, feed speed 10 mm/s, securely mounted on four support spindles, precision-ground table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, easy roller change; infeed sectional pressure bar • Extraction: Pivoting, split chip extraction hood with 160 mm port, can be connected left or right side (both sides possible on request); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication rail for oil-lubricated points; cutterblock and bearing lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease, 1 oil gun, 1 open-ended wrench, 1 knife-changing tool, 1 pair of blank knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions data: Sound pressure level at operator’s position LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Fjdpfxjqlclbs Ahrogd Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, Martin Tilting Spindle Moulder T 27 Flex – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not so with the T27 Flex, thanks to its modern touchscreen control system. The integrated tool offset lets you set up even complex routing patterns with a tilted spindle in no time at all. This allows you to utilize the large tilting range of 2 x 46° efficiently—and you can fully tailor the machine to your preferences. Furthermore, the machine can be precisely configured to match the specific requirements of your operation. Fedpfx Ahsr Hr D Njrogd Equipment: T 27 Flex T 2711-a Digital display of fence jaw position in the control system T 2731-a Table extension on both sides + pull-out workpiece support T 2740-a Centrex guard T 2742-a Integral fence T 2743-a Auto Lock spindle fence clamping system T 2790-La Console for mounting power feeder stand, left side The photo shows a sample machine only / Power feeder and support are not included Included items are specified in the text. Location: Arriving at warehouse 54634 Bitburg - Available in two weeks -

Būklė: labai geros būklės (naudotas), Gamybos metai: 1976, Funkcionalumas: visiškai funkcionalus, galia: 8 kW (10,88 AG), pasukimo diapazonas: 45 °, sukimosi greitis (maks.): 10 000 aps./min, sukimosi greitis (min.): 3 000 aps./min, Pasukamas staklių stalas MARTIN. Tipas T23, veleno skersmuo 30 mm, veleno pasukimas, stalo praplėtimas kairėje ir dešinėje. Fgedpszakl Ajfx Ahrjd

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: V 453572, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 1 770 h, galia: 6 kW (8,16 AG), įėjimo įtampa: 400 V, įėjimo srovė: 19 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: Oro kondicionierius, ašies skersmuo: 30 mm, pasukimo diapazonas: 90 °, pjovimo tvoros reguliavimas: varomas varikliu, pavaros tipas: elektrinis, sukimosi greitis (maks.): 9 000 aps./min, sukimosi greitis (min.): 3 000 aps./min, stalo plotis: 900 mm, stalo ilgis: 2 405 mm, bendras ilgis: 3 000 mm, bendras plotis: 1 260 mm, bendras aukštis: 1 800 mm, bendras svoris: 1 300 kg, paskutinio kapitalinio remonto metai: 2026, Įranga: CE žymėjimas, Martin T26 DuoControl Spindle Moulder 5/6 kW (6.8/8.2 HP) - 400 V, 50 Hz, with neutral conductor in CE configuration, featuring 2-axis control for spindle height and fence positioning, motorized tilt adjustment with digital readout, including pivoting control panel with CPS Gamma V safety device *with 40 mm spindle arbor / 160 mm length //Table size: 2405 mm x 900 mm //Table height: 900 mm //Table openings: electrically adjustable 70 mm - 220 mm //Weight: 1300 kg //Speeds: 3000/ 4500/ 6000/ 9000 rpm with rapid belt tensioning device //Displays: electronic speed display digital LED readouts for spindle height (absolute and relative) as well as tilting angle automatic display of adjustment value for cutting depth dual hour counter for total and batch operating times //Spindle: motorized tilting via push button +/- 45.50° Fgsdpfozamwusx Ahrod motorized height adjustment with rapid and fine feed via steep taper SK 40, Dornfix quick-change system including torque wrench wear-free electric brake electro-pneumatic locking via selector switch //Spindle travel: 150 mm with 5/6 kW and 7.5 kW, 125 mm //Spindle fence: Aigner integral fence aluminum fence jaws, hard-coat finished with slots for profile boards or guiding strips handwheel adjustment with mechanical digital counters individually adjustable infeed jaws maximum tool diameter 250 mm //Extraction: extraction port 120 mm diameter on the spindle fence extraction port 120 mm diameter under the table //Maintenance: central lubrication via pump spindle lubrication via grease dosing regulator 1 x open-ended spanner 1 x torque wrench for Dornfix system 1 x oil can 1 x grease gun filled with long-life grease 1 x ball bearing for pressure ring 62 mm 1 x FRS95 arc guard for machining with pressure ring, with suction port and feed rail //Electrical equipment: lockable main switch, automatic star-delta starting, wear-free electric brake contact for extraction control, undervoltage protection, CEE torque socket for power feed unit (= 5-pin socket) control buttons for direction selection, motor safety switch, and winding protection BG certificate No. 991002 GS wood dust tested No. 991001 EC type-tested No. 991003 Additionally: 1 x Electrically adjustable table opening 1 x pivotable support for feed unit with motorized height adjustment and control panel 1 x pull-out table extension

Būklė: naudotas, Gamybos metai: 1982, Įskaitant visiškai naują žvaigždės-trikampio jungiklį naudotas geros būklės išvalytas patikrintas veikimas atnaujintas Gamintojas: Martin Tipas: T23 Pagaminimo metai: 1982 Mašinos Nr.: 82468 Sustiprintos galios variklis: 4,7 / 5,7 kW Pasukamas kampas: 0 - 45 ° variklio / mechaninis stabdis: kojinis stabdis Variklis su 2 greičiais / poliarinis perjungimas: taip Apsisukimų skaičius aps./min.: 3 / 4,5 / 6 / 9000 Dešinė/kairė eiga: taip Stalo dydis (ilgis x plotis) mm: 1100 x 950 Frezos veleno diametras mm: 30 Frezos atrama su tiksliu reguliavimu: taip Fodozbc D Hspfx Ahrjgd Lizdas padavimo įrenginiui: taip Ištraukimo jungtis mm: 100 / 120 Plotas apytiksliai (ilgis x plotis x aukštis) mm: 1100 x 950 x 1100 Svoris apytiksliai kg: 1000 Sandėlio vieta: 97447 Gerolzhofen, krovimas laisvai, be pakuotės Perdavimas esamoje, apžiūrėtoje būklėje be garantijos ir pretenzijų

Būklė: naudotas, Gamybos metai: 2002, Diskinis pjūklas pasukamas 46° Fsdpfjy Spv Ejx Ahregd Pjovimo vežimo ilgis ~ 3 200 mm Pjovimo plotis ~ 1 100 mm Didžiausias pjovimo aukštis 170 mm Didžiausias diskinio pjūklo skersmuo 500 mm Variklio galia 5,5 kW Prapjaunantis agregatas 0,75 kW Martin T 73 Classic formatinis diskinis pjūklas, skirtas tiksliam masyvo, plokščių ir dengtos medžiagos pjovimui su pasukamu pjūklu ir prapjaunamuoju įrenginiu. Mašina leidžia atlikti tikslius išilginius, skersinius ir kampinius pjūvius ir pritaikyta kasdieniam profesionaliam medienos apdirbimui. Į komplektą įeina platus pjūklų peilių asortimentas.

Būklė: naudotas, Gamybos metai: 1951, mašinos/transporto priemonės numeris: 6886, Swing diameter over bed: 500 mm Swing diameter over support: 300 mm Swing diameter in the gap: 760 mm Turning length: 1100 mm Center height: 250 mm Feeds - transverse: 0.023 - 0.32 mm/rev Feeds - longitudinal: 0.07 - 1.0 mm/rev Leadscrew pitches: 4 / 12-fold Spindle bore: 65 mm Spindle speed: 13 - 600 rpm Thread pitch - metric: 0.5 - 84 mm Fgedecxxq Uepfx Ahrod Thread pitch - inch: 0.375 - 14 in. Quill stroke: 200 mm Total power requirement: 3 kW Machine weight approx.: 2.7 t Space required approx.: 2.8 x 1.2 x 1.25 m with longitudinal and cross feed, 3-jaw chuck, diameter 380 mm; Swing diameter over bed without bridge: 760 mm;

Būklė: labai geros būklės (naudotas), Variklis 9,5 kW Velenas 30 mm Stalo ilgis 240 cm Plotis 35/120 cm Fgjdsyy Np Ijpfx Ahrjd

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, For sale are 2 units of air cannons for silo discharge aid. Manufacturer: Martin Engineering Capacity: 50 liters Fgodoh A H Thjpfx Ahrsd Operating pressure: 8 bar Year of manufacture: 2002 1 unit Capacity: 25 liters Operating pressure: 10 bar Year of manufacture: 2011

Būklė: naudotas, bendras ilgis: 2 700 mm, bendras plotis: 2 220 mm, bendras aukštis: 1 500 mm, Spalva: pilka Svoris: 900 kg - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: V024400 - Pagrindinio variklio galia [kW]: 5,5 - Volelinio stalo ilgis [mm]: 2500 - Stalo plotis [mm]: 1940 - Didžiausias pjūklo disko skersmuo [mm]: 350 - Dulkių nutraukimo jungties skersmuo [mm]: 140 - Pasirinkimai: Išankstinis pjūvis - Pakreipiamas pjūklo agregatas: - Maks. pasvirimo kampas [°]: 45 - Transportavimo matmenys: 2700mm x 2220mm x 1500mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 900kg - Transporto pakuočių kiekis [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM skirtumas/panaudojimas: PVM atskaitomas įmonėms Fgjdpfewnh S Dox Ahrsd Pristatymas ir įrenginių priėmimas galimi bet kokiems pramonės sektoriaus įrenginiams. Yorick Diebels

Būklė: labai geros būklės (naudotas), Motorleistung 5,5 kW Schnitthöhe 9 cm Fgedpfx Aewtl Ndohred Tischlänge 330 cm Durchlass 100 cm Vorritzer Schnittwinkel und Schnitthöhe hydraulisch verstellbar

Būklė: labai geros būklės (naudotas), Main motor power 3.4 / 4.5 kW Feed power (3 rollers) 0.7 kW Fjdpsg Etw Ijfx Ahrsgd Spindle diameter 30 mm Trolley reach 170 cm Very good condition.

Būklė: labai geros būklės (naudotas), Velenas 30 mm, stalo plotis 100 cm, 3 ritinėlių padavimas, šoniniai stalai po 110 cm x2. Fgjdsygxciepfx Ahrjd

Gamybos metai: 1995, būklė: naudotas, Automatinis Fossaluzza kroviklis su vežimėliu ir pakrovimo volelių linija Įvedimo vakuuminis stalas + juostos Fgedpfxezd Dyme Ahrsd 3 apatinės spaudos grupės su siurbiamu transportavimu Išpjovimo mašina Valymo įrenginys Braker Tenace, 2011 metų gamybos Martin rutulinis stalas Martin Braker Automatinis Martin paletizatorius su lapų padavimo ir padėklų padavimo įranga

Būklė: naudotas, Gamybos metai: 1976, su pneumatiniu kėlimo velenėliu, skirtu naudoti 2 įrankius viename velenyje naudotas, geros būklės Gamintojas: Martin Tipas: T24 Pagaminimo metai: 1976 Mašinos Nr.: 91716 Variklis: 7,5 kW / 10 AG sustiprintas Vienos eigos variklis 4 greičiai: 3000/4500/6000/9000 aps./min. mechaninis stabdis veleno skersmuo: 30/40 mm x 200 mm maks. įrankio skersmuo su frezavimo atrama: 250 mm stalo dydis: 1000 mm x 900 mm stalo prailginimas apie 2400 mm ištraukiama rėmo atrama aukščio reguliavimas pneumatinis Fjdjvwfiaopfx Ahrsgd reikalinga vieta apie 2400 mm x 1000 mm x 1400 mm svoris apie 800 kg Sandėlio vieta: 97447 Gerolzhofen, laisvai pakrauta, nepakavus Perdavimas esamoje, apžiūrėtoje būsenoje, be garantijos ir atsakomybės

Būklė: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: V 109331, Funkcionalumas: nepatikrintas, galia: 4,8 kW (6,53 AG), įėjimo įtampa: 380 V, įėjimo srovė: 10 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, obliavimo plotis: 500 mm, įrankio skersmuo: 125 mm, peilių skaičius: 2, pavaros tipas: hidraulinis, sukimosi greitis (maks.): 5 000 aps./min, sukimosi greitis (min.): 5 000 aps./min, obtotalinė obliavimo stalų ilgis: 2 500 mm, bendras svoris: 950 kg, Martin obliavimo staklė T 51, obliavimo plotis 500 mm, 2 peilių juostinė obliavimo ašis, įleidimo stalo ilgis 1400 mm, išleidimo stalo ilgis 1100 mm, vedimo liniuotė, pagalbinis atmušas, obliavimo atmušas reguliuojamas nuo 0 iki 45°, svoris apie 950 kg, parduodama tokios būklės, kaip apžiūrėta, neatnaujinta, buvimo vieta Seevetal, tarpinis pardavimas pasiliekamas. Fgsdpfxey E Rv Ts Ahrjd

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: V 455228, Funkcionalumas: visiškai funkcionalus, obliavimo plotis: 500 mm, pjovimo ilgis (maks.): 3 300 mm, pjovimo plotis ties tiesiniu vedliu: 1 650 mm, Aukščiausios klasės obliavimo staklės Supakuota ir paruošta išsiuntimui! Fodpfx Aeyakqljhrjgd

Būklė: geras (naudotas), Gamybos metai: 1988, Lathe KMK 40. Spindle speed: 1800 rpm. Turning length: 1000 mm. Includes 3-jaw chuck, 4-jaw chuck, Multix with 4 inserts, live center, face plate, collet chuck with set of collets. Fodpfx Ahou Uh U Ioregd