Martin T 72 pirkti naudotą (84)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, bendras plotis: 1 200 mm, bendras aukštis: 1 200 mm, bendras ilgis: 1 200 mm, obliavimo plotis: 630 mm, bendras svoris: 1 100 kg, darbinis plotis: 630 mm, obliavimo peilių skaičius: 2, 2-knife shaft with wedge strips Rubber infeed and outfeed roller Knedpfxswcn Sye Acuec Segmented pressure bar Electric height adjustment with digital display 4 feed speeds: 6, 9, 12, and 18 m/min Extraction port diameter: 160 mm

Sąlyga: naudotas, Gamybos metai: 1996, Slystuvo ilgis: 3300 mm Pjovimo plotis ties paraleliniu atmušėju: 1000 mm Pjovimo plotis ties skersiniu atmušėju: 3200 mm Pjovimo gylis: 170 mm Išankstinis pjūvis: taip Pjūklo disko aukščio reguliavimas: hidraulinis Pjūklo disko posvyrio reguliavimas: hidraulinis Paralelinio atmušėjo reguliavimas: rankiniu ratu Knedpfsxnhp Hex Acujc Pjūklo disko kampo rodymas: skaitmeninis Pjovimo aukščio rodymas: skaitmeninis Paralelinio atmušėjo rodymas: skaitmeninis ekranas Skersinio liniuotės rodymas: skalė Pjūklo disko diametras: 500 mm Sukimosi greičiai: 2800 / 4000 / 5500 aps./min Variklio galia: 5,5 kW Nusiurbimo jungtis: 100 mm ir 120 mm Staklių ilgis: 3550 mm Staklių plotis: 2200 mm Svoris: apie 1400 kg

Sąlyga: labai geros būklės (naudotas), Motorleistung 5,5 kW Schnitthöhe 9 cm Tischlänge 330 cm Knedswtl Ndjpfx Acuoc Durchlass 100 cm Vorritzer Schnittwinkel und Schnitthöhe hydraulisch verstellbar

Sąlyga: labai geros būklės (naudotas), Formatinė pjovimo staklė Martin T72a Vagono ilgis: 3200 mm Kjdoxapvxjpfx Acuonc Pjovimo plotis dešinėje: 1250 mm Didžiausias pjovimo aukštis: 170 mm Priešpjovė Hidraulinis pjovimo aukščio reguliavimas Hidraulinis pjovimo kampo reguliavimas Dešinysis liniuotės valdymas hidrauliškai Pjūklo diskų dydis min/max: 200-500 mm Priešpjovės disko dydis: 120 mm Reguliuojamas pjūklo greitis diržais: 2800-4000-5500 aps./min Pagrindinis variklis 5,5 kW Priešpjovės variklis 0,75 kW CE sertifikatas Techninė dokumentacija

Sąlyga: naudotas, Gamybos metai: 1998, Carriage length: 2700 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 170 mm Spray device for aluminium and plastic processing: Yes Scoring unit: No Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: electric / position control Saw blade angle display: digital readout Cutting height display: digital readout Knedpot Uyvxsfx Acuec Rip fence display: digital readout Crosscut fence display: scale Saw blade diameter: 500 mm Spindle speeds: 2800 / 4000 / 5500 rpm Motor power: 5.5 kW Extraction port: 100 mm and 120 mm Machine length: 2550 mm Machine width: 1800 mm Weight: approx. 1400 kg

Sąlyga: labai geros būklės (naudotas), CATALOGNO 6607 TECHNINIAI DUOMENYS Diskinis pjūklas: - didžiausias pjūklo skersmuo 350 mm - velenas 30 mm - fiksuojamas velenas - disko reguliavimas priekin/atgal, aukštyn/žemyn - disko apsauga - variklis 1,1 kW - ištraukimo jungties skersmuo 80 mm Frezeris: Pjovimo velenas: - veleno skersmuo 40 mm - darbinis veleno aukštis 140 mm - fiksuojamas velenas - didžiausias frezos skersmuo 350 mm - 2 apsukų režimai: 3000, 4500 aps./min. - variklis 5,5 kW - stabdis - šoninis vežimėlis – rankinis stūmimas - vežimėlio matmenys ilgis/plotis 1180x600 mm - kampinis liniuotas - 2 pneumatiniai prispaudėjai - ištraukimo jungties skersmuo 120 mm - matmenys ilgis/plotis/aukštis 2600 (siuntimui 2000)/1600/1450 mm - svoris 735 kg – labai gera būklė – naudota pjovimo-frezavimo staklė Kedpfx Acsh I N Sfsujnc Grynasis kaina: 13 900 PLN Grynasis kaina: 3 270 EUR (priklausomai nuo kurso, 4,25 EUR) (Kainos gali keistis esant dideliems svyravimams)

Sąlyga: naudotas, Gamybos metai: 2004, Įrenginys veikia tinkamai. Kedpjw Tbfgofx Acuenc

Sąlyga: naudotas, įsk. 3-ritininę padavą, įsk. Aigner stalo praplėtimus Sandėliavimo vieta: Tiekėjas Knedpfsw N Sz Rox Acujc

Sąlyga: geras (naudotas), Gamybos metai: 2002, Robust swiveling moulding machine T 26, tiltable from -45 to +45 degrees, equipped with 2-axis positioning control Duocontrol Swiveling spindle moulder in excellent configuration Kjdpfevv H T Rjx Acusnc A treat for every Martin enthusiast Pole-reversible drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Swivel angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed on the top screen and can then be set at the stop; therefore, settings can be made directly from technical drawings Four spindle speeds: 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, quick-change spindle system with torque wrench Electrically adjustable fence, entry jaw adjustable via hand wheel and SIKO counter Manual axis operation or automatic positioning of height and fence Fence can be swung away with lifting device (for curved milling tasks) Table opening via eccentric table rings, electrically adjustable Table extension right and left with pull-out workpiece support Support can be extended by 700mm Table length approx. 2400mm Flip-down fence for plunge milling Original Martin aluminum fence jaws with double ribbing Workpiece pressure device Aigner Centrex 3-roller power feed HolzHer 1117, with 8 speeds, forward/reverse, new rollers Feed socket switchable from the control panel Extraction ports 2 x 120mm Compressed air connection 6 bar Emergency stop button Some parts of the machine have been newly repainted Approx. 7,400 operating hours Instruction manual CE marking Dimensions approx. 3000 x 1700 x 1830 mm (LxWxH). Weight approx. 1800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse—see “other offers from this supplier”.

Sąlyga: geras (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Martin 718 Metai 1990-2000 Prefeeder Serco, metai 2000 2 spalvų Flexo Rotacinis štampavimas Lankstymo ir klijavimo stotis Counter ejector Ksdpoxl Au Ejfx Acuonc Siebeck apvyniojimo mašina, metai 1996 Paletizer Martin Manut, metai 1996

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, Tilting Spindle Moulder MARTIN T25 Very good condition; the machine comes from a correctional facility and has only been idle in recent years. It has seen minimal use and was operated by a single person. Knodpexn A H Tefx Acusc Everything works perfectly. All bearings and guides are in good condition. Year of manufacture: 1989. The machine features a control panel mounted on the top. The fence stop on the spindle fence allows for depth adjustment with fine adjustment and scale, enabling operations such as jointing work, e.g. on a glue joint profile. The complete spindle fence can also be adjusted in depth using a handwheel and leadscrew, allowing for very precise and fast setups. Additionally, one of the two fence jaws is tiltable. With spindle lock lever. Excellent chip extraction with two dust extraction ports: 125 mm on the spindle fence and 100 mm on the machine table. Equipped with a 30 mm spindle, steplessly tiltable from -5° to +45°. Tilting is carried out electrically with a digital display. With clockwise/counter-clockwise rotation. The machine is personally delivered and demonstrated by us anywhere in Germany for €220. This means you incur no risk when purchasing. Shipping to Austria and the rest of the EU is also possible upon request. Features a large table opening up to 480 mm, which can be reduced using different rings (allowing the use of cutters with a very large diameter as well as enabling safe operation with small cutters). Rotational speeds: 3,000, 4,500, 6,000, and 9,000 rpm. Spindle height adjustment is also electric, with a digital readout. The table is made of heavily ribbed grey cast iron. With interchangeable spindle (a 40 mm spindle can also be used). Very robust and durable design; the machine was built for heavy-duty milling and is suitable for all milling operations. Optimal power transmission via V-belt drive. Includes operating manual. Supplied with 3-roller feed unit STEFF, type 34. The power feeder features forward/reverse operation and 4 speeds; each feed roller is individually mounted. The machine table is 1,180 mm wide and 800 mm deep. Ready for immediate operation. 380 V, with 5,000 and 6,000 W via two speed settings. Fitted with all necessary safety devices, motor brake and emergency stop; machine is certified by the German Woodworkers’ BG (occupational safety authority), and bears the GS safety mark. Machine weight approx. 1,200 kg. With motor overload protection switch. Professional equipment, not DIY store junk. Optimal, simple, fast, and safe handling.

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7758 TECHNINIAI DUOMENYS Diskinis pjūklas: - Maksimalus disko skersmuo: 350 mm - Velenas: 30 mm Knodpexhdqgofx Acujc - Velenas blokuojamas - Diskas reguliuojamas pirmyn/atgal, aukštyn/žemyn, kampas - Disko apsauga - Variklis: 1,1 kW - Atjungimo angos diametras: 80 mm Frezeris: - Frezavimo velenas: - Veleno skersmuo: 40 mm - Darbinis veleno aukštis: 150 mm - Velenas blokuojamas - Maksimalus frezos skersmuo: 350 mm - 2 sukimosi greičiai: 3000, 4500 aps./min. - Variklis apie 5,5 kW - Stabdis - Šoninis vežimėlis – rankinis stumdymas - Vežimėlio matmenys ilgis/plotis: 1180x600 mm - Kampuotoji liniuote - Pneumatinė prispaudimo sistema - Atjungimo angų diametras: 125 mm - Matmenys ilgis/plotis/aukštis: 1750/2600 (siuntai 1200)/1400 mm - Svoris: 715 kg PRIVALUMAI – Vokietijos gamyba – Labai gera būklė – Naudotas žibalinukas Grynasis kaina: 13 900 PLN Grynasis kaina: 3 270 EUR, priklausomai nuo 4,25 EUR kurso (Kainos gali keistis dėl didesnių svyravimų)

Sąlyga: naudotas, Obliavimo staklės MARTIN T51 - naudotos - triukšmą slopinančios darbastalio briaunos, vedimo liniuotė, variklio stabdis ----- Techniniai duomenys ----- Obliavimo plotis: 51 mm, Stalo ilgis: 2 520 mm, Maks. drožlė: 16 mm, Obliavimo veleno skersmuo: 120 mm, Peilių skaičius: 2 vnt., Kreipiančiosios pasukimo diapazonas: 0-45°, Išsiurbimo anga: 140 mm, Variklio galia: 4,8 kW Kjdpjxm R Upjfx Acusnc

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Knodeqlck Nspfx Acuec Location: ex-stock 54634 Bitburg - immediately available -

Sąlyga: geras (naudotas), Įvores pjovimo ir griovelių frezavimo staklės T27 - Frezavimo veleno ir trumpinimo pjūklo reguliavimas rankiniu ratu - Frezavimo veleno aukščio reguliavimo diapazonas: 145 mm - Trumpinimo pjūklo aukščio reguliavimo diapazonas: 190 mm - Maksimali frezavimo įrankių tvirtinimo aukštis: 135 mm - Didžiausias frezavimo įrankių skersmuo: 390 mm - Frezavimo veleno apsukos: 3000 + 4500 aps./min - Frezavimo įrankių tvirtinimo skersmuo: 40 mm - Ilgio atmušėjas: 1,75 m - Svoris: 720 kg Knsdpfsxlkv Rsx Acusc

Sąlyga: naudotas, Gamybos metai: 2006, Stalo ilgis: 3000 mm Pjovimo plotis ties pločio atrama: 1200 mm Knodpfxoxgn Rbj Acuec Pjovimo plotis ties skersavimo atrama: 3200 mm Pjovimo gylis: 120 mm Priešpjaustymo įranga: yra Minimalus tepimo sistema plastikui arba aliuminiui: taip Pjūklo disko aukščio reguliavimas: elektrinis / padėties valdymas Pjūklo disko pasukimo reguliavimas: elektrinis / padėties valdymas Pločio atramos reguliavimas: elektrinis / padėties valdymas Pjūklo disko kampo rodmuo: skaitmeninis ekranas Pjovimo aukščio rodmuo: skaitmeninis ekranas Pločio atramos rodmuo: skaitmeninis ekranas Skersavimo liniuotės rodmuo: skaitmeninis Pjūklo disko skersmuo: 400 mm Apsisukimų skaičius: 4000 / 4800 / 6000 aps./min. Variklio galingumas: 7,5 kW Darbo valandos: 774 Ištraukimo jungtis: 80 ir 120 mm Staklių ilgis: 3500 mm Staklių plotis: 2200 mm Svoris: 1200 kg

Sąlyga: geras (naudotas), Martin T60 sliding table saw 3-axis scoring unit Sliding table length: 330 cm Motorized tilt and height adjustment Rip fence motorized, max 125 cm Ksdpfotza Smox Acusnc Saw blade diameter: max 400 mm, min 250 mm 3 rotation speeds Premium, high-quality machine

Sąlyga: geras (naudotas), Codice: 0035 Marca: MARTIN - ITALIA Modello: EURO 3 Aspiratore per polveri rivestito in lamiera zincata con maniche filtranti, idoneo per lavorazioni su legno, verniciatura e vari utilizzi. Dati tecnici: Potenza motore: 3 Hp Numero di maniche filtranti: 24 Numero sacchi di raccolta: 3, diametro mm 500 Diametro bocca di aspirazione: mm 400 Quadro elettrico Dimensioni totali aspiratore montato: mm 2300 x 1000 x 4100 h Knsdpfsvz A Eyjx Acujc Dimensioni per il trasporto: mm 4100 x 2300 x 1000 h

Sąlyga: geras (naudotas), Gamybos metai: 1961, Sunkioji tekinimo staklės, tekinimo staklės, šarnyrinė tekinimo lova, su pagrindinėmis ir traukos ašimis - Staklių lovos būklė: labai gera Knsdpfowfpilsx Acujc - Staklių lova: grūdinta - Gamintojas: Martin, pagrindinės ir traukos ašių tekinimo staklės, tipas DLZ 502 - Tekinimo ilgis: 2200 mm - Tekinimo Ø virš lovos: 580 mm - Tekinimo Ø virš atramos: 300 mm - Veleno skylė: Ø 65 mm - Veleno apsukos: 22,4 - 1000 aps./min - Pleišto tipo griebtuvai: Forkardt Ø 320 mm - Galinio centro konusas: MK5 - Variklis: 7,5 kW - Priedai: 4x lunetos, įrankių laikiklis, įrankiai (žr. nuotraukas) - Matmenys: 1260/3720/H1260 mm - Svoris: 2510 kg

Sąlyga: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm Kedpfx Acjqlckpjuonc • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, Įranga: variklio stabdis, Parduodama: Martin T74 automatinis stumdomas formatinio pjovimo stalas – mažai naudotas, puikios būklės Aukštos kokybės Martin T74 automatinė formatinė pjovimo staklės. Įranga labai geros būklės, naudota minimaliai. 🔧 Informacija: Knedpfx Aowun Niocujc Naudota mažoje baldų gamybos įmonėje 2007–2010 m. Dirbo vienoje pamainoje, 5 dienas per savaitę. Staklės niekada nebuvo naudojamos pilnu pajėgumu. Nuo 2010 m. laikomos sausose sandėliavimo patalpose, nenaudojamos. Visos funkcijos veikia pilnai ir be trūkumų. 💡 2007 m. staklės buvo demonstruotos parodoje – komplektuojamos su visais įmanomais papildomais priedais, atskleidžiančiais visus įrenginio pajėgumus. 📐 Techninės charakteristikos: Stalo ilgis: 3180 mm Stalo prailginimas (kairėje): 2500 mm Stalo prailginimas (dešinėje): 1300 mm Visi valdymai – liečiamajame ekrane Automatinis įrenginio pjovimo pjūklelis (įpjovėjas) 📍 Vieta: Lietuva, Alytaus rajonas ✅ Kviečiame apžiūrėti ir išbandyti įrangą vietoje. 🗨️ Pageidautina susisiekti raštu – anglų kalba kalbu ribotai.

Sąlyga: geras (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, Martin 718 Casemaker Baujahr 1990 Einleger mit Band 3 Druckwerke (2x Druckwerk mit Rakelmesser) Knsdpowz Evasfx Acusc Schlitzwerk Rotationsstanze Berührungs loses Klebesystem hhs XTS2, Baujahr 2014 Faltstation Zähl- und Auslegesystem (Counter Ejector) Nachrüstung von 4-Achsen-Antrieben (außer Schlitzwerk) Maschine ist in Produktion

Sąlyga: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Knjdsv Erkaepfx Acuoc Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel fence operated by handwheel T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.

Sąlyga: geras (naudotas), Gamybos metai: 1975, Martin Miniline 616 - Vakuumsauger - hhs-Leimsystem mit Leimkontrollsystem - Max. Geschwindigkeit: 24.000 Bogen/h - Max. Format: 600x1600 mm Knjdeq Nf D Hopfx Acuoc - Baujahr 1975/1991 - 2-Farben-Flexodruck - Slotter - Rotationsstanze - Faltklebung - Stapelablage/Counterschieber, Baujahr 1991

Sąlyga: naujas, Gamybos metai: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control unit makes setting the planing height very simple, with 99 storable planing dimensions for perfect results from the first workpiece. The thickness table can be easily moved by pressing a button, or adjusted upwards in 0.1 mm increments. All feed speed controls are within comfortable reach. The heavy, vibration-damping composite frame combined with the high-quality cutterblock bearings ensures excellent surface results. Thanks to the sound-insulating construction, quiet operation is guaranteed even in standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Cutterblock speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; pushbuttons for manual coarse and fine adjustment of planing thickness with digital display, start/stop button for cutterblock, integrated hour counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; includes block locking for easy knife change • Thicknessing table: Electric height adjustment with fine adjustment, feed speed 10 mm/s, securely mounted on four support spindles, precision-ground table surface Ksdpoqlclbofx Acuenc • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, easy roller change; infeed sectional pressure bar • Extraction: Pivoting, split chip extraction hood with 160 mm port, can be connected left or right side (both sides possible on request); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication rail for oil-lubricated points; cutterblock and bearing lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease, 1 oil gun, 1 open-ended wrench, 1 knife-changing tool, 1 pair of blank knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions data: Sound pressure level at operator’s position LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -