Martin Midline 924 pirkti naudotą (82)

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with XPLANE Cutterhead The T45 thickness planer provides ideal prerequisites for modern production: It delivers superbly planed surfaces, is quick and simple to operate, and also runs exceptionally quietly. The standard electronic control allows you to store up to 99 planing heights, making setting the planing height so easy that the first workpiece already fits perfectly. Of course, the thickness table can be adjusted with a simple push of a button or incrementally in 0.1 mm steps. The controls for feed adjustment are conveniently positioned within easy reach. The heavy, vibration-damping composite frame combined with the high-quality cutterhead bearings guarantee outstanding surface finishes. Thanks to its sound-absorbing design, quiet operation is standard even in the basic version. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing height, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; buttons for manual rapid and fine adjustment of thickness via digital display, pushbuttons for cutterhead start and stop, integrated operating hours counter • Cutterhead: Solid steel Xplane cutterhead Cutterhead with 3 spiral knife rows (33 convex carbide knives per row), supplied with full knife set and one T-key Torx T20; spindle speed 6,000 rpm included; The emission sound pressure level LpA during operation is reduced by 10 dB(A). Fjdpfx Ahoqlck Newopd • Thickness table: Electronic adjustment with fine setting, travel speed 10 mm/s, supported by 4 anti-tilt spindles, finely planed table surface • Infeed: 2 speeds, 6 / 12 m/min, electronically selectable even during planing; large rubber feed rollers Ø 85 mm for compensating variable timber thickness, gentle and self-cleaning rubber rollers, simple roller swap; sectional pressure bar at infeed • Extraction: Highly pivotable divided extraction hood with 160 mm chip extraction port, can be connected left/right (both sides possible in special cases); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil points; lubrication of bearings/cutterhead via nipples • Accessories: 1 grease gun filled with long-life grease 1 oil gun 1 open-ended spanner 1 knife change tool 1 pair of dummy knives 640 mm 2 pairs TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workstation LpA acc. to DIN EN ISO 11202 [dB(A)] No-load noise (no extraction) P1 65 No-load noise (with extraction) P1 77 Working noise (no extraction) P2 65 Working noise (with extraction) P2 78 Sound power level LWA acc. to DIN EN ISO 3746 [dB(A)] No-load noise (no extraction) 84 Working noise (with extraction) 90 Dust emission: Low-dust operation according to DGUV 209-044 / BGI 739-1 Location: ex-stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Martin Thickness Planer T 45 with Tersa Cutter Block The T45 thickness planer offers ideal conditions for modern manufacturing: It produces smoothly planed surfaces, is quick and simple to operate, and also works exceptionally quietly. The standard electronic control with 99 programmable planing measurements makes setting the planing height so easy that your first workpiece will fit perfectly. The thickness table can be adjusted at the push of a button or incrementally in steps of 0.1 mm. All feed rate control elements are conveniently within reach. The heavy, vibration-dampening composite frame combined with the high-quality precision-mounted cutter block guarantees superior surface quality. Thanks to the sound-insulating construction, even the standard version operates at low noise levels. • Planing width: 630 mm • Weight: approx. 1,200 – 1,400 kg • Planing height: 2.8 – 300 mm • Table length: 1,260 mm Fpodpfx Asqlckpohwjd • Minimum workpiece length: 270 mm • Spindle speed: 5,000 rpm • Operation: 1-axis control for planing dimension, up to 99 values storable, 49 of which can be used for freely programmable planing sequences; buttons for manual rapid and fine adjustment of planing thickness with digital display, push button for cutter block start/stop, integrated operating hours counter • Cutter block: TERSA solid steel cutter block Z4 Ø 125 mm; includes lock for quick and easy knife change • Thickness table: Electronic height adjustment with fine tuning, adjustment speed 10 mm/s, tip-proof supported on 4 lifting spindles, finely planed table surface • Feed: 2 speeds 6 / 12 m/min, can be selected electrically even during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, quick roller change; segmented pressure bar at infeed • Extraction: Hinged, split hood with chip extraction port Ø 160 mm, can be connected left/right (both sides possible for special applications); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication strip for oil lubrication points; lubrication of bearings/cutter block via grease nipples • Accessories: 1 grease gun with long-life grease 1 oil gun 1 open-end wrench 1 tool for knife changing 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Workplace emission sound pressure level LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Būklė: geras (naudotas), Gamybos metai: 1982, Naudota storio obliavimo staklė Gebr. Martin, tipas: T 42 Pagaminimo metai: 1982 Fpsdpfet U Rn Sox Ahwsd Obliavimo plotis: 630 mm Obliavimo aukštis: 250 mm Padavimo greitis: 8-20 m/min Nusiurbimo jungtis: 160 mm Svoris: apie 870 kg Gumuoti įvado ir išvado volai Dvivietis peilių velenas su tiesiais obliavimo peiliais Centrinis tepimas Obliavimo aukštis reguliuojamas rankiniu ratuku Žvaigždės–trikampio jungiklis Vieta: sandėlyje 54634 Bitburg - galima iš karto -

Būklė: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm - Maximum cutting depth: 8 mm Fpsdopq If Depfx Ahwod - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Fedpfopgkmwjx Ahwopd Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Rip fence table length: 3.0 m Cutting width: 1350 mm Parallel fence operated by handwheel Standard crosscut table with length stop for miter cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Rip fence table length 3.0 m T 6635/3-a Cutting width 1350 mm Fodpfxev Erkas Ahwopd T 6641-a Parallel fence operated by handwheel T6660/1-a Standard crosscut table for miter cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex-stock 54634 Bitburg - immediately available - Please note: Some images may show options that are not included in the offer.

Būklė: naujas, Gamybos metai: 2025, Martin Panel Saw T 77 - new stock machine - Top features - Double-sided tilting - Equipment: T 7710/2-a Saw Unit Prex - tiltable on both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Stepless drive power 5.5 kW T 7730/4-a Sliding table length 3.3 m T 7735/3-a Cutting width 1350 mm Fpsdpfsw D T Dkex Ahwod T 7743-a Electronically controlled rip fence, can be lowered into end position T 7755-a 3-axis scoring unit T 7757-a Scoring saw lighting Safe Light T 777572-a Angle cutting system RadioCompens with continuous fence T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable safety hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at Classic operating level Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Martin Thickness Planer T 45 with Tersa Cutterblock Accessories: 7.5 kW The T45 thickness planer offers ideal conditions for modern production: it delivers cleanly planed surfaces, is quick and easy to operate, and is exceptionally quiet in operation. The standard electronic control unit makes setting the planing height very simple, with 99 storable planing dimensions for perfect results from the first workpiece. The thickness table can be easily moved by pressing a button, or adjusted upwards in 0.1 mm increments. All feed speed controls are within comfortable reach. The heavy, vibration-damping composite frame combined with the high-quality cutterblock bearings ensures excellent surface results. Thanks to the sound-insulating construction, quiet operation is guaranteed even in standard configuration. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Cutterblock speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used for a freely programmable planing sequence; pushbuttons for manual coarse and fine adjustment of planing thickness with digital display, start/stop button for cutterblock, integrated hour counter • Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; includes block locking for easy knife change • Thicknessing table: Electric height adjustment with fine adjustment, feed speed 10 mm/s, securely mounted on four support spindles, precision-ground table surface • Feed: 2 speeds 6 / 12 m/min, electrically selectable during planing, large rubber feed rollers Ø 85 mm to compensate for varying wood thicknesses, gentle and self-cleaning rubber rollers, easy roller change; infeed sectional pressure bar • Extraction: Pivoting, split chip extraction hood with 160 mm port, can be connected left or right side (both sides possible on request); minimum extraction air volume: 27 m³/min at 20 m/s • Maintenance: Central lubrication rail for oil-lubricated points; cutterblock and bearing lubrication via grease nipples • Accessories: 1 grease gun filled with long-life grease, 1 oil gun, 1 open-ended wrench, 1 knife-changing tool, 1 pair of blank knives 640 mm, 2 pairs of TERSA reversible knives 640 mm CV • Emissions data: Sound pressure level at operator’s position LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Fjdpfxeqlclbo Ahwspd Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission: Low-dust per DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, Martin Tilting Spindle Moulder T 27 Flex – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not so with the T27 Flex, thanks to its modern touchscreen control system. The integrated tool offset lets you set up even complex routing patterns with a tilted spindle in no time at all. This allows you to utilize the large tilting range of 2 x 46° efficiently—and you can fully tailor the machine to your preferences. Furthermore, the machine can be precisely configured to match the specific requirements of your operation. Equipment: T 27 Flex T 2711-a Digital display of fence jaw position in the control system T 2731-a Table extension on both sides + pull-out workpiece support T 2740-a Centrex guard Fodpfx Aher Hr D Nswjpd T 2742-a Integral fence T 2743-a Auto Lock spindle fence clamping system T 2790-La Console for mounting power feeder stand, left side The photo shows a sample machine only / Power feeder and support are not included Included items are specified in the text. Location: Arriving at warehouse 54634 Bitburg - Available in two weeks -

Būklė: naudotas, Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3776, konvejerio juostos ilgis: 9 000 mm, konvejerio juostos plotis: 650 mm, bendras ilgis: 9 000 mm, bendras plotis: 1 350 mm, Siūlome šią naudotą Peter Martin B650 konvejerio juostą, pagamintą 2016 m. Gamintojas: Peter Martin GmbH & Co. KG Mašinos Nr.: 6776 Ilgis: 9 m Transportavimo plotis: 65 cm Bendras plotis: 135 cm Fpsdpfx Ahjyarkmewod Jei turite klausimų ar reikia daugiau informacijos, rašykite mums žinutę arba paskambinkite.

Būklė: naudotas, Gamybos metai: 1991, Naudota mašina Pagaminimo metai: 1991 Įranga ir techniniai duomenys: - Būklė: prižiūrėta - Kėlimo/nuleidimo ir pasukimo funkcijos 0-45° su hidrauliniu pėdų pedalu - Su tiksliu ir greitu kėlimu, visa įranga nereikalauja priežiūros - Su skaitmeniniu pjūvio pločio rodymu diskinio pjūklo liniuotėje - Su fiksuotu kampo nustatymu ilgio ribotuvei 75/67,5/60/45 laipsniams - Pjovimo aukštis: 145 mm - Pjovimo plotis: 1050 mm - Pjovimo ilgis: 3300 mm Fpjdpfxex Enq Is Ahwod - Apsisukimai: 2800-4000-5500 aps./min - Variklis: 5,5 kW - Su priešpjaunamuoju agregatu Galimybė: greitai Vieta: Röllbach

Būklė: naudotas, Stalinė frezavimo staklė MARTIN T21 - naudota - preciziškai reguliuojama frezavimo atrama, dešinė/kairė eiga Fjdpfxsw Nv Nlj Ahwepd ----- Techniniai duomenys ----- Stalo matmenys: 1.000 x 930 mm, veleno skersmuo: 30 mm, aukščio reguliavimas: 150 mm, greituminiai režimai: 3.000/4.500/6.000/9.000 aps./min, ištraukimo antgalio Ø: 120 mm, svoris: 630 kg

Būklė: naudotas, MARTIN Spindle Moulder - used - Precision-adjustable fence, Right/left rotation ----- Technical Data ----- Table size: 1,000 x 930 mm, Table height: 860 mm, Fodpsu R Td Njfx Ahwspd Spindle diameter: 40 mm, Usable spindle length: 160 mm, Max. cutter diameter: 255 mm, Max. retractable cutter diameter: 255 mm, Height adjustment: 150 mm, Speeds: 3,000/4,500/6,000/9,000 rpm, Motor: 4.7/5.7 kW, Extraction port Ø: 120 mm, Dimensions (LxWxH): 1,000 x 930 x 1,050 mm

Būklė: naudotas, Obliavimo staklės MARTIN T51 - naudotos - triukšmą slopinančios darbastalio briaunos, vedimo liniuotė, variklio stabdis ----- Techniniai duomenys ----- Obliavimo plotis: 51 mm, Stalo ilgis: 2 520 mm, Maks. drožlė: 16 mm, Obliavimo veleno skersmuo: 120 mm, Peilių skaičius: 2 vnt., Kreipiančiosios pasukimo diapazonas: 0-45°, Išsiurbimo anga: 140 mm, Variklio galia: 4,8 kW Fsdpfoxm R Upsx Ahwjpd

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, I am selling a panel saw with scoring unit. Manufacturer: OTTO MARTIN Fjdpfxotmwn Hj Ahwopd Model: T60 Classic Year of manufacture: 2007 Cutting length: 3200 mm Cutting width: 1250 mm (optional) Max. cutting height: 130 mm (saw blade diameter 400 mm) Saw blade and scorer tilting: 0-46° digital Saw blade and scorer height adjustment: digital Digital display for rip fence and working heights Main saw blade and scorer can be switched on from the operator panel Main motor (panel saw): 5.5 kW (7.5 HP) (speed adjustable: 4000/4800/6000 rpm) Scoring motor (panel saw) Tools, options, and accessories shown in the photos are included in the price. Very good condition. Available immediately. Includes complete documentation and CE certificate.

Būklė: naudotas, bendras ilgis: 2 700 mm, bendras plotis: 2 220 mm, bendras aukštis: 1 500 mm, Svoris: 900 kg - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Serijos numeris: V024400 - Pagrindinio variklio galia [kW]: 5,5 - Volelių stalo ilgis [mm]: 2500 - Stalo plotis [mm]: 1940 - Didžiausias pjūklo disko skersmuo [mm]: 350 - Dulkių ištraukimo angos skersmuo [mm]: 140 - Parinktys: įrengtas įpjovėjas - Pakreipiamas pjovimo mazgas: - Maksimalus pakreipimo kampas [°]: 45 - Transportavimo matmenys: 2700 mm x 2220 mm x 1500 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 900 kg - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija Fpjdpfjwnh S Djx Ahwjd PVM: Nurodyta kaina be PVM PVM/skirtumo apmokestinimas: PVM atskaitomas verslui Pristatymas ir įrenginių priėmimas galimi bet kuriai pramonės sričiai Yorick Diebels

Būklė: labai geros būklės (naudotas), Gamybos metai: 2002, For sale are 2 units of air cannons for silo discharge aid. Manufacturer: Martin Engineering Capacity: 50 liters Operating pressure: 8 bar Year of manufacture: 2002 1 unit Capacity: 25 liters Operating pressure: 10 bar Year of manufacture: 2011 Fpedeh A H Thspfx Ahwsd

Būklė: labai geros būklės (naudotas), L&Z tekinimo staklės Gamintojas: Martin Fsdpfx Aoxyw Rkohwepd Tipas: KM 200 Maks. tekinimo skersmuo: 200 mm Maks. tekinimo ilgis: 1100 mm Forkhardt F 250 griebtuvai Multifix B greitai keičiama įrankio galvutė 12 sukimosi greičių nuo 31,5 iki 1400 aps./min Uodeginis centras MK 4 Ilgis: 2500 mm Plotis: 950 mm Aukštis: 1250 mm

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, mašinos/transporto priemonės numeris: V 435496, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 170 mm, pjovimo plotis (maks.): 1 100 mm, pjovimo ilgis (maks.): 3 700 mm, ilgio ribotuvas: 3 200 mm, Įranga: dozatorius, Nėra minimalios kainos – garantuotas pardavimas už aukščiausią pasiūlytą kainą! TECHNINIAI DUOMENYS Fpodpfxjx Dkp Ij Ahwod Pjovimo ilgis (maks.): 3 700 mm Pjovimo plotis (maks.): 1 100 mm Pjovimo plotis su lygiagrečiu atitvaru: 1 100 mm Pjovimo aukštis (maks.): 170 mm Pjovimo aukštis su priešpjoviu (maks.): 170 mm Disko skersmuo: 450 mm Ilgio atitvaras: 3 200 mm Stumdomojo stalo ilgis: 3 700 mm Stumdomojo stalo plotis: 450 mm MAŠINOS DUOMENYS Bendras svoris: 1 800 kg Elektros galia: 7,5 kW (10,20 AG) Nusiurbimo angos skersmuo: 120 mm ĮRANGA Variklio stabdis Priešpjovis Skersinis stalas skaitmeninis Ilgio atitvaras skaitmeninis 3 ašių elektrinis priešpjovis 400 mm slankiojanti gaubto svirtis 3,70 m apipjovimo ilgis Lazerinė pjūvio žymėjimo sistema Šablonų laikiklis Pneumatiškai atlenkiamas apskritos pjūklo liniuotės atitvaras Antras atraminis paviršius

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2004, Keturių pusių obliavimo staklės Martin T 90 Pilnai atnaujinta mašina Metai: 2004 Charakteristikos: Darbo plotis: 260 x 160 mm Velenų greitis: 6000 aps./min. Tersa peilių velenas 56 amperai Fedpfx Asx Tgu Ishwepd 6 barai

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1981, mašinos/transporto priemonės numeris: 116680, Funkcionalumas: visiškai funkcionalus, Connection rating: 380V, 11A Planing width: 630 mm Planing height: 250 mm Feed rate: 8–20 m/min Extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterblock with strip planing blades Centralized lubrication system Fpodoh U A Evepfx Ahwsd Planing height adjustment via handwheel Star-delta switch

Gamybos metai: 1969, būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 18059, Centre height: 250 mm Centre distance: approx. 1740 mm Swing diameter over bed: 500 mm Spindle bore: 63 mm Fodpfxjidiq As Ahwspd Spindle mount: Size 6 Tailstock taper: MK 5 Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/cross 0.014-1 / 0.0063-0.45 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, 7.5 kW Space requirement: 3370 x 1000 x 1400 mm Weight: 2360 kg

Būklė: naudotas, Gamybos metai: 1967, Centre height: 300 mm Centre distance: 1000 mm Swing diameter over bed: 610 mm Spindle bore: 71 mm Spindle mount: Size 8 Tailstock taper: 5 MT Spindle speeds: approx. 11.2 - 1800 rpm Fedpfevzn E Sex Ahwepd Feeds: longitudinal/cross 0.014-16/0.063-7 mm/rev Thread pitches: 0.1 - 112 mm Electrical connection: 380 V, approx. 5.5 kW Required space: 2900 x 1450 x 1750 mm

Būklė: beveik kaip naujas (naudotas), Milling arbor 40mm for Martin tilting spindle moulder T27 Clamping length 160mm, arbor diameter 40mm. Equipped with quick-release nut. From stock, apparently unused to date. Milling arbor is only suitable for T27, not for T26. Fsdpswnm U Refx Ahwspd The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Būklė: beveik kaip naujas (naudotas), Martin quick-release nut for 40mm milling arbor. Fpjdpfxswnnaus Ahwsd From stock, has obviously not been used yet. The quick-release nut is used for the T27. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'more offers from this provider'.