Maho Mh C 700 pirkti naudotą (467)

Sąlyga: paruoštas naudoti (naudotas), X-axis: 500 mm, Y-axis: 400 mm, Z-axis: 350 mm, quill stroke: 50 mm, spindle speed: 20–5,000 rpm, connected load: 10 kVA, control: Maho CNC 432, length: 2,022 mm, width: 3,030 mm, height: 1,915 mm, weight: 2.1 t, operating hours: 29,578 h, with documentation, without spare parts, machine runs perfectly both mechanically and electrically, control elements were recently overhauled. Nwjdpfxekn R Dhs Abmsn

Sąlyga: naudotas, CNC Tool Milling Machine MAHO Type MH 400 E Machine No. 43072 Year of manufacture: 1989 Travel distances X: 400 mm Y: 250 mm Z: 375 mm Table size 700 x 270 mm Distance spindle nose / table max. 410 mm Tool holder ISO 40 with pull stud Type B Spindle speed 80 - 4000 rpm, 18 steps Feed speed 1-1500 mm/min, stepless Rapid traverse (X, Z, and Y) 2.5 m/min Quill stroke vertically 50 mm Spindle drive 2.2 kW Power supply 400 Volt, 50 Hz, 19 kVA - Swivelling control panel with PHILIPS 432 CNC path control - LCD monitor VISCOTECH - Hydro-mechanical tool clamping Njdoh Ic Ufjpfx Abmewn - Swiveling device for vertical milling head - Splash guard cabin as table enclosure with 3 upward opening doors - Electrical cabinet fixed to the machine - V24 interface (RS 232) for data transfer - 52,470 operating hours, main switch on - Rigid angle table - Coolant system with coolant pump located beneath the machine - Centralized lubrication system Vogel - Operator's manual, electrical schematic diagram Required space (L x W x H): 2250 x 1800 x 1850 mm Weight approx. 1.5 t Good condition

Sąlyga: labai geros būklės (naudotas), Frezuotojas MAHO MH 600 W Nwsdpfx Abow I T Rwemsn * Maksimalus poslinkis išilgai X ašies: 600 mm * Maksimalus poslinkis skersai Y ašies: 400 mm * Maksimalus poslinkis aukštyn Z ašies: 400 mm * Darbinio stalo tvirtinimo paviršiaus matmenys: 900 x 480 mm * Veleno galia: 5,5 kW * Frezos galvutės veleno tvirtinimas (ISO): ISO 40 * Maksimalus greičių diapazonas: 40 - 4000 aps./min. * Skaitmeninis ekranas: Millplus CNC * Svoris: 2900 kg

Sąlyga: naudotas, Gamybos metai: 1972, X-axis travel: 650 mm Y-axis travel: 400 mm Nwodsv Ank Ropfx Abmon Z-axis travel: 450 mm Table size: 940 x 515 mm Spindle speed range (horizontal): 20 - 1,400 rpm Spindle speed range (vertical): 32 - 2,600 rpm Feed rates: 8 - 400 mm/min Rapid traverse: 1 m/min Total power requirement: 4.7 kW Machine weight approx.: 2.9 t Space requirements approx.: 2.2 x 2.9 x 2.2 m Equipped with universal toolmaker's table.

Sąlyga: naudotas, Turning diameter 420 mm Turning length 750 mm Control system 432 Machine weight approx. 5.6 t Note: The machine will remain at the factory until 14.07.2025 and can be inspected under power. Toolholder included, but without tools Model GR 400 C Year of manufacture 1995 CNC control 432 Swing over bed 420 mm Turning length 750 mm Spindle speeds 20 - 3,500 rpm Nsdpfewxfn Djx Abmewn Spindle bore 76 mm 12-position turret Tailstock Drive power 15 kW Weight 5.6 t

Sąlyga: geras (naudotas), Gamybos metai: 1987, Travel distances X/Y/Z: 400/250/375 mm, 18 spindle speeds: 80 - 4000 rpm, motor: 2.2 kW, spindle: SK 40, control: MAHO CNC 232, table size: 700x270 mm, hydraulic tool clamping, coolant system, splash guard, 20 tool holders, tool presetting device, machine vice GOODJ 125 N, clamping kit, leveling feet, assorted milling cutters, operating manual. Njdpfslu Hpgex Abmewn

Sąlyga: paruoštas naudoti (naudotas), Įskaitant priedus. Nsdpfxef Sq E No Abmown

Sąlyga: naudotas, Universal tool milling machine MAHO Type MH 800 P with digital readout and HEIDENHAIN TNC 121 path control. Njdov Amryspfx Abmjwn Machine number: 80983, year of manufacture: 1982 The machine was overhauled by MMD in 2008 and has since been only rarely used in an electronics company’s maintenance workshop. Travel X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill stroke vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill stroke horizontal: 100 mm Spindle drive: 5.5 kW Power connection: 380 Volt, 50 Hz, 10 kW Equipment/features: - NC path control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed from 0.02 to 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in the machine base - Universal rotary table, 360° rotatable, tiltable and swivelable by 30°, 225 mm transverse adjustment - Rotary table with direct division 72 x 5° and indirect division via index plate 1:120 = 1 rotation = 3° - Swivelling control panel - Centralized lubrication - Operating manual included - Machine mounted on a steel plate (L x W x H: 1400 x 1000 x 50 mm = 550 kg) Space requirement (L x W x H): 2650 x 2000 x 2450 mm Weight: 3700 kg + 550 kg steel plate Total weight: 4250 kg (measured) Condition: very good

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1990, mašinos/transporto priemonės numeris: 30216 & 30277, padavimo ilgis X ašis: 1 000 mm, X ašies eiga: 1 000 mm,

Sąlyga: geras (naudotas), Universalioji frezavimo staklė MAHO MH 800 - Eiga X/Y/Z: 700-350-450 mm - Darbinio stalo paviršius: 940x510 mm Nsdpfx Ajw I Rz Tsbmewn - Veleno tvirtinimas: ISO 40 - Veleno sūkių diapazonas: 32–1600 aps./min - Automatiniai išilginiai ir skersiniai padavimai - Automatinis padavimas / vertikali galva - Aušinimo sistema - Įvairūs įrankių laikikliai - KITI TECHNINIAI DUOMENYS / žiūrėti nuotrauką Matmenys: I x P x A: 1,9 x 1,7 x 1,9 m / Svoris: 3500 kg Galimi netikslumai ar klaidos.

Sąlyga: naudotas, Gamybos metai: 1991, x-travel 1200 mm y-travel 600 mm z-travel 600 mm Total power requirement 25 kW Machine weight approx. 11.5 t M A H O CNC-controlled Universal Bed-Type Machining Center Model MH 1200 S (#120012) Year of manufacture 1991, partially overhauled and modernized by MMD in 2007 _____ X-axis (longitudinal) X 1,200 mm Y-axis (vertical) Y 600 mm Z-axis (cross) Z 600 mm Table size (CNC rotary table) 1,000 x 800 mm Max. overhang 900 mm Spindle taper SK 40 Spindle speeds (infinitely variable in 2 steps) 20 – 6,300 rpm Workpiece weight approx. 1,000 kg Feeds/rapid traverse in XYZ axes 1 - 4,000 / 12,000 mm/min Feed/rapid traverse in B axis 1-1500°/10 rpm Nwedpfx Abjt Hwqwemon Spindle drive 15 kW Total drive approx. 25 kW - 380 V - 50 Hz Weight approx. 11,500 kg (LxWxH = 2.95 x 3.70 x 2.80) Accessories / Special equipment: • MAHO CNC - 5-axis path control unit Type CNC 432 with color display, graphics, all standard subprograms and cycles, with portable hand control, RS 232 interface for external data transfer • CNC rotary table (B axis); in combination with the swiveling milling head 5-axis machining is possible, 360,000° resolution • Vertical, swiveling milling head with hydraulic tool clamping • Horizontal milling spindle with hydraulic tool clamping • CNC-controlled tool changer with 36 positions, tool life monitoring and tool breakage detection • Separate coolant system (no internal coolant supply), complete enclosure with large sliding doors, chip conveyor, oil cooler for the hydraulics Condition: Very good – ready for demonstration under power Very solid machine for heavy-duty cutting; machine was partially overhauled, geometrically inspected, and mechanically & electrically checked by MMD in 2007. "Super machine" – for the expert. Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Sąlyga: naudotas, CNC controller, control panel, operator panel, control unit, card slot, control cards, MC3 control, plug-in cards, circuit boards, relay board Nwodpfx Abeq T T I Iomen -Manufacturer: MAHO, relay board from CNC milling machine MH 800C -Type: 28A1 -ID No.: 27.71 231 -Dimensions: 400/280/H75 mm -Weight: 1.5 kg

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Number of axes: 4, X-axis: 600 mm, Y-axis: 400 mm, Z-axis: 400 mm, tool holder: ISO 40, spindle speed: 20-4500 rpm, feed rate: 1-4000 mm/min, number of tool stations: 16, max. tool diameter: 80/100 mm, max. tool length: 250 mm, max. tool weight: 6 kg, control: Heidenhain CNC 234, connected load: 40 kVA, machine dimensions (LxWxH): 4700 mm / 4100 mm / 2300 mm, weight: approx. 2.8 t, operating hours: 43,408 h. The front door guide rail is broken. Documentation available. An on-site inspection is possible. Nsdpfx Ajulzlcobmjwn

Sąlyga: naudotas, Universal tool milling machine, milling machine MAHO type MH 400 P Machine no. 41364 Year of manufacture 1981 Control Heidenhain TNC 125 (Active Digital) Travel distances with feed X: 360 mm, Y: 200 mm, Z: 375 mm Travel distances with handwheel X: 400 mm, Y: 250 mm, Z: 375 mm Table size 690 x 270 mm Spindle taper ISO 40 Tool clamping hydraulic Spindle speed 40 - 2500 rpm, stepless Feed rate X and Z-axis 5 - 1000 mm/min, stepless Feed rate Y-axis 5 - 670 mm/min, stepless Rapid traverse X + Z = 1.2 m/min, Z = 0.8 m/min Quill adjustment vertical 50 mm Spindle drive 2.2 kW Power supply 380 Volt, 50 Hz - Conventional handwheels for X, Y, Z - Electrical control cabinet fixed to the machine - Coolant system integrated in the machine base - Vertical milling head with boring quill Nedpfx Aef A Srzebmewn - Counter bearing for horizontal milling - Operating manual Space requirement L x W x H 1700 x 1100 x 1820 mm Weight approx. 900 kg Good condition

Sąlyga: naudotas, control panel, touch screen, operator unit, display, operator panel, PLC, Simatic panel PC, touch screen, touch panel, Simatic multi panel, touch multi panel, touch panel Nwodpfx Aeq T T Nwobmsn -Manufacturer: NFI Electronics, touch panel from CNC milling machine MAHO MH 800C -Type: 1435-18-22 -Overall dimensions: 340/310/H30 mm -Weight: 0.8 kg

Gamybos metai: 1991, Sąlyga: paruoštas naudoti (naudotas), X-axis: 1600 mm, Y-axis: 800 mm, Z-axis: 800 mm, Tool holder: ISO 50, Spindle speed: 20–4000 rpm, Feed rate: 1–4000 mm/min, Max. rapid traverse: 10 m/min, Number of tool stations: 36, Max. tool diameter: 160/210 mm, Max. tool length: 315/400 mm, Max. tool weight: 15 kg, Control: Heidenhain iTNC 530, Connected load: 40 kVA, Machine dimensions (LxWxH): 5080 mm/3650 mm/2005 mm, Weight: approx. 16 t, Documentation available, complete retrofit in 2015. Nwsdeulzk Sjpfx Abmon

Sąlyga: naudotas, servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, A.C. servo controller from CNC milling machine MAHO MH 800C -Type: KDS 1.1-50-300-W1 MOD 4/1X108-091 -Quantity: 1x servo controller available Nedpfx Aeq T T Npebmown -Dimensions: 490/110/H390 mm -Weight: 15 kg

Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 600mm/400mm/500mm, Spindle speed: 5000 rpm, Tool holder: SK40, Machine dimensions X/Y/Z: approx. 3900mm/2900mm/2000mm, Weight: approx. 3600kg, Control system: Maho CNC 432, Operating hours: 47,333h. An on-site inspection is possible. Nedpfsvyr Nrsx Abmewn

Sąlyga: naudotas, Control cabinet - cooling unit, control cabinet air conditioner, distribution cabinet, heat exchanger, wall-mounted cooling unit, control cabinet cooler -Manufacturer: Siemens, heat exchanger for control cabinet cooling unit from CNC milling machine MAHO MH 800C -Type: 8ME 7874-DR -Voltage: 230V Nsdpfoq T T Nzex Abmjwn -Power consumption: 170 W -Dimensions: 415/130/H725 mm -Weight: 14.2 kg

Sąlyga: paruoštas naudoti (naudotas), Two Deckel Maho milling machines are available. 1) Maho MH 800 E, travel X/Y/Z: 800mm/450mm/500mm, spindle speed: 3150 rpm, tool holder: SK40, quill stroke: 80mm, table size X/Y: 900mm/600mm, max. table load: 450kg, feed rate X/Y/Z: 150mm/min, rapid traverse X/Y/Z: 4500mm/2500mm/4500mm/min. Machine dimensions X/Y/Z: approx. 2900mm/2400mm/2300mm, weight: approx. 4400kg. 2) Deckel Maho FP3NC, travel X/Y/Z: 500mm/300mm/400mm, table size X/Y: 800mm/420mm, tool holder: SK40, spindle speed: 2000 rpm, feed rate: 50mm/min, rapid traverse: 1500mm/min, weight: approx. 1500kg. An on-site inspection is possible. Nwodovb Ha Uopfx Abmjn

Sąlyga: naudotas, Tool Changer Chain, Chain Magazine, Tool Change System, Tool Magazine -Manufacturer: MAHO, tool changer from CNC machining center MAHO MH 800C -for: max. 24 holders -taper: SK40 -dimensions: 1200/410/H480 mm Njdpfxoq Tvp Us Abmewn -net weight: 106 kg

Gamybos metai: 1989, Sąlyga: paruoštas naudoti (naudotas), A CNC 4-axis universal bed milling machine by Maho is available. Travel X/Y/Z: 1600mm/800mm/800mm, table size X/Y: 1250mm/800mm, max. table load: 3000kg, spindle taper: SK50, main spindle speed: 4000rpm, power: 22kW. Tool stations: 36, max. tool diameter: 160mm/210mm, max. tool length: 315mm/400mm, max. tool weight: 15kg, feed rate: 4m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 5000mm/3700mm/3000mm, weight: approx. 16000kg, control: Philips CNC 232. On-site inspection possible. Njdpfx Asv Ubqnsbmswn

Sąlyga: naudotas, servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, A.C. Servo Controller from CNC milling machine MAHO MH 800C -Type: TDM 3.2-20-300-WO MOD 14/1X023-094 -Quantity: 2x servo controllers available -Dimensions: 320/70/H390 mm Nedpfoq T T I Djx Abmswn -Weight: 7.7 kg

Sąlyga: paruoštas naudoti (naudotas), Spindle speed: 5000 rpm, machine dimensions X/Y/Z: approx. 3220 mm / 2120 mm / 2120 mm, weight: approx. 3,600 kg, control system: Maho CNC 432, operating hours: 33,494 h. Documentation available. An on-site inspection is possible. Njdpfounk N Ajx Abmown

Sąlyga: paruoštas naudoti (naudotas), Eigos X/Y/Z: 500mm/380mm/350mm, stalo matmenys X/Y: 800mm/400mm, veleno tvirtinimas: SK40, movos eiga: 50mm, apsukos: 5000 aps./min, greitoji eiga: 4m/min, padavimas: 2m/min. Staklių matmenys X/Y/Z: apie 1800mm/2000mm/2000mm, svoris: apie 2000kg, valdymas: Heidenhain CNC 432. Apžiūra vietoje galima. Nwedsw Nq Snopfx Abmsn