Maho 700 C pirkti naudotą (469)

Sąlyga: geras (naudotas), Gamybos metai: 1983, Maho 700 C, year of manufacture 1983 Travel X/Y/Z: 700 mm / 500 mm / 450 mm Table dimensions X/Y: 900 mm / 500 mm Spindle taper: ISO 40 Psdjwya U Ujpfx Adxsgu Spindle speed: 3,150 rpm Spindle stroke: 100 mm Weight: approx. 3,500 kg Control unit: Philips CNC 432

Gamybos metai: 1982, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 75 810, Table clamping surface: 630 mm diameter Travel X: 600 mm Travel Y: 450 mm Travel Z: 500 mm Quill stroke: manual 80 mm Spindle taper: ISO 40 Spindle speeds: 20 - 3150 rpm Feeds, steplessly adjustable: 1 - 3000 mm/min Pgedpfx Asby Hhtedxeu Rapid traverse: 4 m/min Electrical connection: 380 V kW Space requirement: 2000 + 850 x 2000 x 2000 mm Weight: 3300 kg

Gamybos metai: 1983, Sąlyga: paruoštas naudoti (naudotas), Travel paths X/Y/Z: 700mm/500mm/450mm, table dimensions X/Y: 900mm/500mm, spindle taper: ISO40, spindle speed: 3150 rpm, feed rate: 3m/min, rapid traverse: 6m/min, spindle stroke: 100mm, machine dimensions X/Y/Z: approx. 3800mm/3600mm/2200mm, weight: approx. 3500kg, control: Philips CNC 432. An on-site inspection is possible. Pjdswpu Ibspfx Adxsgu

Sąlyga: naudotas, Gamybos metai: 1970, Funkcionalumas: nepatikrintas, MAHO - Universalus pasukamas stalas Podpfsxqpfnex Adxegu

Veikimo valandos: 63 151 h, Sąlyga: naudotas, Svoris be apkrovos: 3 000 kg Matmenys (I x P x A): 205 x 260 x 210 cm Kaina: Pagal užklausą Psdownh Dyepfx Adxogu - Ašių skaičius [vnt.]: 3 - X ašies eiga [mm]: 600 - Y ašies eiga [mm]: 450 - Z ašies eiga [mm]: 450 - Stalo ilgis [mm]: 900 - Stalo plotis [mm]: 500 - Maks. veleno apsukos [aps./min]: 4000 - Parinktys: Skaitmeninis ekranas - Dokumentacija prieinama: Taip - Serijos numeris: 65391 - Darbo valandos: 63151 - Transporto matmenys: 2050 mm x 2600 mm x 2100 mm (i x p x a) - Transportavimo svoris [kg]: 3000 kg - Transporto pakuočių [vnt.]: 2 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / Skirtumų apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir atpirkimas galimi bet kuriuo metu pramonės srities įrangai Lukas van Rossum

Sąlyga: geras (naudotas), CNC tekinimo staklės MAHO Graziano SPA GR 300 C Techniniai duomenys: Maks. tekinimo skersmuo: 370 mm Tekinimo skersmuo virš kryžminio slankiklio: 320 mm Be tekinimo griebtuvio Atstumas tarp centrų: 630 mm Įvorės tipas: A1-5 ASA Įvorės pralaidumo skersmuo: 52 mm Priekinio veleno guolio skersmuo: 75 mm Pastovios galios apsisukimų diapazonas: 1000–5000 aps./min Podpfx Adswrxrvexsgu Apsisukimų diapazonai: 1n Veleno pavara: pastovi 10 kW Veleno pavara: trumpalaikė 15 kW X ašies greitis: 10 m/min Z ašies greitis: 13 m/min X-Z ašių eiga: 250–620 mm Revolverinė galvutė: elektrinė / dvikryptė Maksimalus įrankių skaičius: 12 Lynelio išorinis skersmuo: 85 mm Lynelio eiga: 125 mm Kūgio lizdas: Morse Nr. 3 Didžiausia lynelio spaudimo jėga: 6000 N Staklių svoris: 6000 kg Maks. įdiegta galia: 18 kW Į komplektą įeina drožlių transporterio įrenginys Į komplektą įeina dokumentacija

Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 85382, UNIVERSALES BEARBEITUNGSZENTRUM MAHO MH 800 C, Baujahr: 85382 Verfahrwege: X-Achse: 800 mm Y-Achse: 500 mm Z-Achse: 600 mm Arbeitstisch-Abmessungen: 900 x 625 mm Maximale Tischbelastung: 600 kg Pjdeldgf Hopfx Adxjgu Spindeldrehzahl: 20 – 5.000 U/min, 15 kW Werkzeugaufnahme: ISO 40 Kegel Werkzeugmagazin mit 30 Plätzen MAHO CNC-Steuerung Maschinenabmessungen (LxBxH): 3.350 x 2.520 x 2.500 mm Maschinengewicht: 6.200 kg Guter technischer Zustand Preis: 13.000 EUR zzgl. MwSt. Irrtum, Änderungen und Zwischenverkauf vorbehalten. Wir sprechen Englisch, Deutsch, Ungarisch, Französisch und Rumänisch.

Sąlyga: naudotas, Technical Specifications: Working Area X Axis: 500 mm Y Axis: 400 mm Z Axis: 300 mm Spindle Tool Holder: ISO 40 Automatic Feeds: 0.2 - 0.6 - 0.12 mm/min Spindle Speeds: 20 - 4000 rpm, directly programmable Feed Rate Range: X / Y / Z = 1 - 3000 mm/min Fixed Table: 700 x 350 mm, 5 T-slots Fixed Table: max. load capacity 250 kg Connection: 400 V Weight, approx.: 1900 kg Pgedpfx Asqbq Ufsdxou Machine Dimensions, approx.: 2400 x 1850 x 1850 mm Required Space: 3200 x 4100 mm, Height 1920 mm Equipment: - CNC control - Fixed table - Swiveling milling head +/- 90° - Hydraulic clamping device - Coolant system - Emergency stop push button

Sąlyga: naudotas, Gamybos metai: 1988, x eiga: 600 mm y eiga: 450 mm Pgodpfjw Inr Aex Adxju z eiga: 450 mm Veleno apsisukimai: 20 - 6300 aps./min Įrankių kiekis: 30 vnt. Įrankių laikiklis: SK 40 Bendra galia: 17 kW Staklių svoris: apie 4 t Reikalinga vieta: apie 3,2 x 3,4 x 2,2 m 4 ašių universalus įrankių frezavimo staklės

Sąlyga: naudotas, NC Universal Tool Milling Machine MAHO Type MH 700 P with HEIDENHAIN TNC 121 Contour Control - Schematic No. ET 226 Year of manufacture: 1979 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size: 900 x 500 mm Spindle taper: ISO 40 Spindle speed: 40–2000 rpm, 18 steps Feed X, Z axis: 1 – 600 mm/min, infinitely variable Pgedpfjwd Szbex Adxju Feed Y axis: 1 – 300 mm/min, infinitely variable Rapid traverse X, Z axis: 1.5 m/min Rapid traverse Y axis: 0.75 m/min Quill stroke vertical: 80 mm Quill stroke horizontal: 80 mm Spindle drive: 4 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC contour control HEIDENHAIN TNC 121 - Vertical milling head with automatic quill feed - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal rotary table, tiltable and inclinable via lead screws + /- 30° - Universal rotary table with manual cross travel 200 mm - Universal rotary table with 360° rotation and hydraulic clamping - Rotary table with direct indexing 72 x 5° and indirect indexing via index plate 1:120 = 1 rotation = 3° - Swiveling operator panel - Centralized lubrication - Electrical diagram Required floor space (L x W x H): 2000 x 1650 x 2250 mm Weight: approx. 2800 kg In good condition

Sąlyga: naudotas, bendras aukštis: 2 000 mm, bendras plotis: 2 300 mm, bendras ilgis: 3 000 mm, Tuščias svoris: 3.200 kg Kaina: Pagal užklausą - Valdymas: Konvencinis - Ašių skaičius [vnt.]: 3 - X ašies eiga [mm]: 800 - Y ašies eiga [mm]: 450 - Z ašies eiga [mm]: 500 - Stalo ilgis [mm]: 1050 - Stalo plotis [mm]: 625 - Įrankio tvirtinimas: ISO40 - Min. veleno sūkių dažnis [aps./min]: 32 - Maks. veleno sūkių dažnis [aps./min]: 1600 Pgedpswnif Sofx Adxsu - Parinktys: Skaitmeninis indikatorius - Skaitmeninio indikatoriaus tipas: Heidenhain - Dokumentacija prieinama: Ne - Transportavimo matmenys: 3000 mm x 2300 mm x 2000 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 3200 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/diferencijuotas apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas kaip dalinio apmokėjimo galimi bet kokiems pramoninio sektoriaus įrenginiams Lukas van Rossum

Sąlyga: naudotas, Gamybos metai: 1990, X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 680 x 380 mm CNC control: 432 PHILIPS Feed range: 1-3000 mm/min Rapid traverse: 6 m/min Tool holder: ISO 40 Pgodpeu Rt Nxsfx Adxju Spindle speed range: 20 - 3150 rpm Main drive: DC 5 kW Milling head - swivel: +/- 90 ° Total power requirement: 12 kW Machine weight: approx. 1.2 t Space requirement: approx. 2.5 x 2 x 2 m CNC tool milling machine with 432 control.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1989, Travel path X/Y/Z: 700mm/500mm/600mm, spindle speed: 6300 rpm, power: approx. 10kW, feed rate X/Y/Z: 4m/min, rapid traverse X/Y/Z: 10m/8m/10m/min, machine dimensions X/Y/Z: approx. 4500mm/2300mm/2500mm, weight: approx. 6000kg, operating hours: 65,425h. An on-site inspection is possible. Pgsdpfx Aswmqxkodxju

Sąlyga: naudotas, Turning diameter 420 mm Turning length 750 mm Control system 432 Machine weight approx. 5.6 t Note: The machine will remain at the factory until 14.07.2025 and can be inspected under power. Toolholder included, but without tools Model GR 400 C Year of manufacture 1995 CNC control 432 Swing over bed 420 mm Turning length 750 mm Spindle speeds 20 - 3,500 rpm Spindle bore 76 mm 12-position turret Tailstock Drive power 15 kW Weight 5.6 t Pedpewxfn Djfx Adxjgu

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 77533, padavimo ilgis X ašis: 700 mm, padavimo eiga Y ašimi: 500 mm, padavimo ilgis Z ašis: 600 mm, veleno greitis (maks.): 6 300 aps./min, spindelio eiga: 80 mm, TECHNICAL DETAILS X-Axis Travel: 700 mm Y-Axis Travel: 500 mm Z-Axis Travel: 600 mm Spindle Stroke: 80 mm Pgodpfswtq T Uex Adxou Spindle Speed: 20 - 6,300 rpm Feed Rate: 1 - 4,000 mm/min Rapid Traverse X and Z: 12 m/min Rapid Traverse Y: 10 m/min Accuracy: 0.001 mm

Sąlyga: geras (naudotas), Gamybos metai: 1994, Swing diameter 410 mm Turning length 495 mm Control system Philips CNC 532 Swing diameter over cross slide 220 mm Speed range 20 - 6000 rpm Spindle nose A 2 5" Turret (positions) 12 Psdpfxev S Iq No Adxsgu Spindle bore 42 mm Operating hours 12,760 h Tailstock quill taper MT 3 Quill travel 80 mm Quill diameter 55 mm Total power requirement 11.3 kW Machine weight approx. 3 t Space requirements approx. 2,x 2.15 x 1.8 m Very well-maintained CNC lathe from one-off special-purpose machine manufacturing, equipped with a 12-position turret and extensive accessory package = complete equipment. This is a used machine; therefore, we sell under exclusion of any warranty. STOCKING DEALER WITH OWN 1,600 m² WAREHOUSE.

Sąlyga: paruoštas naudoti (naudotas), Maho rotary table for MH 800 C without motor and rotary encoder – height: 59 cm / width: 61 cm / length: 90 cm, used, normal signs of wear, 100% functional, scope of delivery as per photos. NOTE: Please enquire separately for packaging and shipping costs! Pgedpjtvct Hjfx Adxeu

Sąlyga: naudotas, Gamybos metai: 1990, x-travel 500 mm y-travel 400 mm z-travel 400 mm Table size: 680 x 380 mm CNC control: 432 PHILIPS Feed range: 1–3000 mm/min Rapid traverse: 6 m/min Pedpfou Rt Nrsx Adxogu Tool holder: ISO 40 Speed range: 20–3150 rpm Main drive: DC 5 kW Swiveling milling head: + / - 90° Total connected load: 12 kW Machine weight approx. 1.2 t Space requirement approx. 2.5 x 2 x 2 m CNC tool milling machine with 432 control.

Gamybos metai: 1986, Sąlyga: paruoštas naudoti (naudotas), Travel: 1000mm/560mm/1100mm, Tool holder: ISO 50, Quill stroke: 125mm, Spindle speed: 2000 rpm, Feed rate: 3000mm/min, Rapid traverse: 6m/min, Max. workpiece weight: 800kg. Machine dimensions X/Y/Z: approx. 1020mm/1700mm/2650mm, Weight: approx. 7100kg, Control: CNC 432, Operating hours: 70771h. Documentation available. Pgjdpfxjt Tfago Adxju

Sąlyga: reikia remonto (naudotas), Gamybos metai: 1987, For sale: compact Maho machining center, type 300 C The power supply unit is defective, but repairable. Technical specifications: Year of manufacture: 1987 Model: MH 300 C CNC control: Philips 432 Table: 550x275 mm Travel paths (X/Y/Z): 300/350/220 mm Taper: SK 40 Spindle speed: 20-4000 rpm Pedpfx Aoir U H Eedxsgu Main drive: 3.3 kW Rapid traverse: 3 m/min Quill stroke: 50 mm Dimensions: 2000 x 2000 x 2000 mm Weight: approx. 1900 kg Prices exclude VAT Viewing by appointment is possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machine purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Sąlyga: geras (naudotas), Gamybos metai: 1990, CNC universal milling machine, manufacturer MAHO MH600-C, control system MAHO 432, with universal clamping table. Spindle taper: ISO 40 Travel paths: X 600 mm / Y 400 mm / Z 500 mm Spindle speeds up to 2,000 rpm Equipped with a working area enclosure Machine documentation available. Pgodpfx Aeurcybedxju Machine from a toolmaking facility, in good and clean overall condition. Can be demonstrated under power.

Sąlyga: reikia remonto (naudotas), Maho MH 900 C without enclosure Control system: CNC 432 (V9) - Working area X/Y/Z: 1000mm/500mm/650mm - Fixed angle table: 1150mm x 650mm Pgodpfx Adsfgg Aaexju - Maximum table load: 900 kg - Spindle taper: SK50 - Spindle speed: 40 - 1600 rpm - Feed rate: 5 - 2000 mm/min - Rapid traverse: 6 m/min - Space requirements: L-3500mm, W-4185mm, H-2146mm Y-axis does not display, but traverses

Sąlyga: geras (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 662172, padavimo ilgis X ašis: 600 mm, padavimo eiga Y ašimi: 450 mm, padavimo ilgis Z ašis: 450 mm, veleno greitis (maks.): 6 300 aps./min, įrankių magazino lizdų skaičius: 30, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Control type: CNC 532 Feed rates / Rapid traverse Feed in X, Y, and Z axes: 1 - 6,000 mm/min Rapid traverse X and Z axes: 6 m/min Rapid traverse Y axis: 6 m/min 2-axis NC rotary table Clamping surface: Ø 320 mm Centric locating bore: Ø 30 H7 mm Number/spacing of T-slots: 5/63-14 H7 mm Rapid traverse, swivel/rotate: 16/40 rpm Swivel range: ± 105° Rotational range: n x 360° Max. table load: 100 kg Main drive Power of three-phase motor: 10.0 kW Gear stages: 2 Working spindles & tools Tool holder: SK 40 Number of tools: 30 (universal) Speed range: infinitely variable from 20 - 6,300 rpm Quill stroke vertical: 80 mm MACHINE DETAILS Machine weight: approx. 3,600 kg Machine operating time: 1193:27:30 Spindle time: 193:02:52 EQUIPMENT - Universal tool changer - Direct path measuring system - Automatic vertical milling head activation Psdpfx Adov Ryamsxegu - Internal coolant supply & coolant unit - Chip conveyor - Tool breakage monitoring - Infrared measuring probe

Sąlyga: geras (naudotas), MAHO C-axis machine table - Table diameter: 600 mm Good condition, fully functional, available for inspection and testing on site. Pgjdpfjic Rvqex Adxju International shipping available. Inspection: Please note that to avoid any misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before purchasing to avoid uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in description. VAT will be shown separately on my invoices. Shipping by forwarding agent.

Gamybos metai: 1984, Sąlyga: paruoštas naudoti (naudotas), A CNC universal tool milling machine Maho is available. Travel (X/Y/Z): 1000mm/560mm/800mm, table dimensions (X/Y): 1150mm/800mm, tool holder: ISO50, spindle speed: 2000 rpm, feed rate: 3m/min, rapid traverse: 6m/min, max. table load: 800kg. Machine dimensions (X/Y/Z): approx. 4600mm/2300mm/3000mm, weight: approx. 7500kg. The control system was overhauled and renewed in 2007. Inspection on site is possible. Psdpfx Adov Ifwrjxegu