Magnetinė Juosta pirkti naudotą (5 724)

Būklė: naujas, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting diameter flat: 300 x 260 mm Saw band length: 3920 x 34 x 1.1 mm Gujdefb Nbfepfx Af Dja Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx.: 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automatic Machines of the SBS Series The SBS series convinces with its advanced technology, high quality, durability, and an unrivalled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tension • Clamping pressure regulation • Double vise (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, prepared for electrical and hydraulic operation • Chip conveyor The SNC 20 control system allows convenient and intuitive input of up to 20 different sawing jobs (length and quantity). When entering the target dimension, the control automatically calculates the kerf and the number of feed movements. Additionally, the fault code display system provides fast analysis for error correction.

Būklė: naujas, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400x330 mm Saw blade length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series impresses with advanced technology, high quality, long service life, and exceptionally comprehensive standard equipment. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping pressure • Double vice (before and after the blade) • Creep mode for positioning • Bundle clamping prepared for electric and hydraulic operation • Chip conveyor The SNC 20 control allows convenient and straightforward entry of up to 20 different sawing tasks (length and quantity). When entering the desired dimension, the control automatically calculates the cutting allowance and the number of feed cycles. In addition, the error code display system enables quick Gusdpfjfb Nbgsx Af Doa diagnosis for troubleshooting.

Būklė: naujas, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw band dimensions: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m Godsfg E Hvjpfx Af Dsua SPECIAL OFFER PRICE!!!! 2-column high-performance bandsaw machines from the SBS series The SBS series stands out through advanced technology, premium quality, durability, and an unparalleled comprehensive standard configuration. • Modern SNC 20 control system in CNC version • Frequency-controlled saw drive • Control buttons with pictograms • Work light included • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the saw blade) • Inch mode for positioning • Electrical and hydraulic bundle clamping provision • Chip conveyor The SNC 20 control system allows easy and straightforward input of up to 20 different sawing tasks (length and quantity). When the desired length is entered, the control system automatically calculates cutting allowance and the number of feed cycles. The error code display system also allows for quick fault analysis and troubleshooting.

Būklė: naujas, Cutting capacity at 90 degrees: round 510 mm Cutting capacity at 90 degrees: square 480 mm Cutting capacity at 90 degrees: rectangle 610 x 450 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 820 mm Total power requirement: 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For mitre cuts up to 45° to the left in fully automatic mode and up to 60° to the left in semi-automatic mode Material height probe (automatic cut start detection) Automatic feed unit via ball screw spindle, incremental feed with automatic length compensation Probe on the saw blade for automatic adjustment of the saw stroke Fully automatic control of saw frame and clamping device Guodpfx Aofu Nbbof Dsa Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed clamping vice opening on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cut lengths and quantities. Automatic feed unit 500 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Fully hydraulic control of the saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Saw band length: 5850 x 41 x 1.3 mm Band speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.45 t Space requirement: approx. 5.85 x 3.6 x 2.7 m 2-column bandsaw for rapid cutting, K-tech 800H with pusher system P 15. P 30 (optional) Fast, smooth, and ergonomic cutting Specially designed for cutting profiles and beams, Gujdpfx Afofgyifs Dja as well as solid material. The material is clamped vertically on the feed and discharge sides. Starting from the K-tech 800H, the machine comes standard with an additional horizontal clamping vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. The machines are equipped as standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC Control A CNC control allows the programming of up to 90 cutting programs with different cutting lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening grippers” which are hydraulically operated. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal shape. The pusher system is mounted separately and is guided via ball-bearing linear guides, precision-ground rack, and a robust, frequency-controlled geared motor.

Būklė: naujas, Cutting range at 90 degrees: round 680 mm Cutting range at 90 degrees: square 640 mm Cutting range at 90 degrees: rectangle 1250 x 600 mm Saw blade length: 8140 x 54 x 1.6 mm Band speed: 15 - 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 4.96 t Space required: approx. 5.7 x 4.0 x 2.75 m 2-column bandsaw for rapid cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, smooth, and ergonomic cutting Specially developed for cutting profiles and beams, as well as solid materials. Material clamping is performed vertically on the infeed and outfeed sides. From K-tech 800 H onward, the machine comes standard with an additional horizontal vice. The interaction of hydraulic saw frame lowering, material positioning, and the pusher system is CNC-controlled. Gedpfxofgyigs Af Djua The machines come standard with the environmentally friendly “B&S Clean Cut Cutting System” featuring minimum quantity lubrication. This reduces cleaning effort and conserves resources. CNC control A CNC control allows programming up to 90 cutting programs with various cut lengths, quantities, and mitre angles. The B&S pusher system, feeding and positioning system, is equipped with “double-sided opening gripper jaws” that are hydraulically controlled. This ensures safe gripping and transport of materials and bundles that may deviate slightly from the ideal shape. The pusher system is designed as a separate unit and guided by precision linear ball guides, a ground rack, and a frequency-driven, robust gear motor.

Būklė: naujas, Cutting capacity at 90 degrees: round 680 mm Cutting capacity at 90 degrees: square 640 mm Cutting capacity at 90 degrees: rectangular 820 x 610 mm Cutting capacity at 45 degrees: round 550 mm Cutting capacity at 45 degrees: square 550 mm Cutting capacity at 45 degrees: flat 550 x 600 mm Cutting capacity at 60 degrees: round 370 mm Cutting capacity at 60 degrees: square 370 mm Guodpfxofg E Hms Af Doa Cutting capacity at 60 degrees: flat 370 x 600 / 450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight: approx. 4.8 t Space requirement: approx. 5.85 x 3.7 x 2.7 m 2-column double mitre bandsaw for fast cutting, equipped with pusher system P15. Option: P30. Hydraulic saw frame lowering: • NC-controlled • Automatic angle positioning from +60° to –60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved via the new "B&S positioning system." An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor, combined with a reliable hydraulic brake via large-radial central positioning. The worktable runs on high-quality preloaded bearings, ensuring exceptionally smooth rotation. CNC control: A CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitres. Double-sided gripping positioning system: The B&S pusher, feed, and positioning system is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that may deviate from the ideal form. The pusher system is built as a separate unit and runs on ball-bearing linear guides, precision ground rack, and is driven by a frequency-controlled, robust gear motor.

Būklė: naujas, Cutting range at 90°: round 680 mm Cutting range at 90°: square 640 mm Cutting range at 90°: rectangular 1250 x 600 mm Cutting range at 45°: round 680 mm Cutting range at 45°: square 600 mm Cutting range at 45°: flat 870 x 600 mm Cutting range at 60°: round 580/550 mm Cutting range at 60°: square 530/450 mm Cutting range at 60°: flat 550 x 450 mm Saw blade length: 8140 x 54 x 1.6 mm Blade speed: 15 – 90 m/min Table height: 855 mm Total power requirement: 7.5 kW Machine weight: approx. 5.3 t Space requirement: approx. 5.75 x 4.2 x 2.75 m 2-column double miter band saw for fast cutting, equipped with Pusher System P15. Option: P30 Hydraulic saw frame lowering • NC-controlled Guedpfx Asfg E Hnef Doa • Automatic angle positioning from +60° to –60° High-quality automatic miter adjustment Specially developed for cutting profiles and beams. Maximum positioning accuracy is achieved with the new “B&S Positioning System.” An intelligent NC control ensures smooth interaction between linear encoder and self-braking positioning motor in combination with a reliable hydraulic brake using large-radial center positioning. The work table is mounted on high-quality, preloaded bearings, ensuring very easy rotation. CNC control The CNC controller allows the programming of up to 90 cutting programs with different cut lengths, quantities, and angles. Double-sided clamping positioning system The B&S pusher system, feed and positioning system, is equipped with "double-sided opening grippers" which are hydraulically controlled. This ensures secure gripping and transport of materials and bundles that deviate slightly from the ideal shape. The pusher system is a separate assembly and is guided by ball-bearing linear guides, precision-ground rack, and a robust frequency-driven gear motor.

Būklė: naujas, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw band length: 4020 x 34 x 1.1 mm Band speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirements: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre cut left 45° automatic operation • Mitre cut left 60° semi-automatic operation (manual cuts without programming) • Material height sensor (automatic detection of cut start) • Frame and gearbox cast as one piece, very quiet operation and minimal vibrations • Removable chip tray (for cleaning) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Safety cover foldable • Fine adjustment of feed • Semi-automatic cutting! • With CNC control for workflow optimization Input options for parameters such as quantities and material lengths, automatic deduction of kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with diverse section lengths Gujdod Iipropfx Af Dja • Automatic feeding unit (CNC) via ball screw, incremental feed with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum end piece 170 mm.

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Gedpfxjd Iip Ae Af Dsua Table height: 870 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation    (Cuts without programming) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic detection of cut start) • Frame and gearbox made from a single casting, very quiet operation, minimal vibration • Removable swarf tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Hinged safety cover • Fine adjustment for feed rate • Semi-automatic cutting! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after input of desired quantity and length: material approach, cutting operation, and piece counting until program completion • MPS control enables input of the desired number of feed strokes • All essential machine data is displayed on the LED display during the cutting process (power consumption, cutting time, piece count) • Entered data are stored in RAM memory • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the entire process • Floating-mounted feed unit • Length setting via handwheel and vernier scale with mechanical position indicator.    Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable 1–29 times through reversing automation; remnant piece length 210 mm

Būklė: naudotas, Gamybos metai: 1988, Būklė: naudotas Pagaminimo metai: 1988 Sandėlio numeris: 070009 Pristatymo terminas: iš karto, pardavus gali pasikeisti Kilmės šalis: Vokietija Kaina: 1600 € Godjwirq Topfx Af Dsua Sandėlyje: 1 vnt. Min. ritinio vidinis skersmuo: 400 mm Maks. ritinio vidinis skersmuo: 700 mm Maks. ritinio plotis: 1500 mm Ilgis: 2050 mm Plotis: 820 mm Aukštis: 1000 mm Su stabdžiu Su 2 atsarginiais strypais

Būklė: geras (naudotas), Konvejerio juostos ritinėliai, transportavimo ritinėliai, atsarginiai ritinėliai, konvejerio juosta, ritinėlių takas, atraminiai ritinėliai -Konvejerio juostos ritinėlis: transportavimo ritinėlis -Ritinėlis: Ø 100 x 1800 mm Godpfx Afjyx Ap Se Djua -Velenas: Ø 23 x 200 mm -Kiekis: yra 3 transportavimo ritinėliai -Kaina: už vienetą -Matmenys: Ø 100 x 2200 mm -Svoris: 13 kg/vnt.

Būklė: geras (naudotas), Konvejerio ritinėliai, transportavimo ritinėliai, atsarginiai ritinėliai, konvejeris, ritinėlių takelis, atraminiai ritinėliai -Konvejerio ritinėlis: transportavimo ritinėlis su guolio laikikliu ir pavaros ratu Gujdpfx Afoyx An Ue Dsa -Ritinėlis: Ø 99 x 1800 mm, gumuotas -Velenas: Ø 35 x 200 mm -Matmenys: 2200/200/H150 mm -Svoris: 31 kg

Būklė: labai geros būklės (naudotas), Katalogo numeris 7790 TECHNINIAI DUOMENYS - Maksimali apdirbamos detalės plotis: 1100 mm - Maksimali apdirbamos detalės aukštis: 170 mm - 2 agregatai: - Guminis spaudimo volas 1) Metalo grioveliuotas kalibravimo volas - Guminis spaudimo volas 2) Guminis grioveliuotas volas + batelis + metalo volas - Guminis spaudimo volas - Pirmojo ir antrojo agregato variklio galia: 11 kW Iš apačios: - 3 metaliniai slydimo volai - Padavimo juosta - 2 metaliniai slydimo volai - Pneumatinė juostos osciliacija - Elektrinis + rankinis stalo pakėlimas (tiksliam reguliavimui) - 2 padavimo greičiai - Su pneumatiniais stabdžiais - Darbinis slėgis: 8 bar - Ištraukimo antgalio diametras: 2x160 mm, 4x100 mm - Bendri matmenys (ilgis/plotis/aukštis): 2000x1600x2100 mm - Svoris: 1170 kg PRIVALUMAI – Nedažyta – Pagaminta Italijoje – 2 agregatai – DTR techninė dokumentacija – Naudotas šlifuoklis, labai geros būklės Grynasis kaina: 36 900 PLN Grynasis kaina: 8 790 EUR pagal 4,2 EUR kursą Gedpfjx S Eb Rjx Af Dsua (Kainos gali keistis esant didesniems svyravimams)

Gamybos metai: 2024, būklė: naujas, ✔ Naudojamas medžiagai transportuoti iš smulkintuvo (tinka Robust SD ir Monster serijoms) ✔ Suderinamas su viršutiniu magnetiniu separatoriumi ✔ Ilgis: 6500 mm ✔ Plotis: 350 mm Gjdpfegtutdjx Af Dsua ✔ Našumas: 0,5 kg/s ✔ Galia: 0,25 kW ✔ Transportavimo ratai

Būklė: naudotas, DESCRIPTION: STRAPPING MACHINE Item: D-2225-Strapex-MarcoPolo Professional and high-performance strapping machine from a renowned European manufacturer, featuring an internal frame design for high-speed, reliable operation. Equipped with an ergonomic and user-friendly threading system as well as a quick-change strap coil system. Model: Marco Polo Aperture: 550 mm x 500 mm Godpfoq Dafpjx Af Deua 2 identical machines available.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, I am selling a wide belt sander SCM Sandya 16 S 110, year of manufacture 2012. Configuration: - 18.5 kW hard rubber sanding roller - 15 kW hard rubber sanding roller - 11 kW combination unit with soft rubber roller and pneumatic shoe - Working width: 1100 mm - Feed rollers for short workpieces - Compressed air cleaning for all units - Total weight: 2750 kg Guedpfx Afjihfaws Dja - 3 motors: 18.5 + 15 + 11 kW - Complete documentation included Condition: LIKE NEW! The machine has seen very little use. Available immediately.

Būklė: geras (naudotas), 1 vnt. elektromagnetas su aušinimo skysčio jungtimi, 500 x 200 x aukštis 125 mm, ir 1 vnt. elektromagnetas be aušinimo skysčio jungties. Parduodama atskirai. Guodpfxey Agm Ae Af Dea

Būklė: geras (naudotas), Konvejerio juostos ritinėliai, transportavimo ritinėliai, atsarginiai ritinėliai, konvejeris, ritinėlių takas, laikantieji ritinėliai -Konvejerio juostos ritinėliai: transportavimo ritinėlių skersmuo 56 mm -Transportavimo plotis: 335 mm Guedsphupmopfx Af Doa -Velenas: M8 tvirtinimas -Kiekis: yra 17 vnt. transportavimo ritinėlių -Kaina: už vienetą -Bendri matmenys: Ø 56 x 345 mm -Svoris: 2,6 kg/vnt.

Būklė: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, For sale are several Mosca strapping machines that were used by us for bundling plastic sheets. - All machines are in perfect technical condition. - Maintenance and spare parts were always provided directly by Mosca service. - The strapping process can be operated manually via foot pedal or electronically via signal/cycle control. Items for sale: - RO-MP-4, year: 2002, frame height 400 mm - RO-MP-4, year: 2003, frame height 400 mm - RO-MP-5, year: 2007, frame height 500 mm - RO-MP-5, year: 2007, frame height 500 mm - RO-MP-5, year: 2008, frame height 500 mm - RO-MP-5, year: 2008, frame height 500 mm Guodpfx Asxd T Nqof Dja The internal frame dimensions are: 500 mm version: 660 mm wide and 500 mm high 400 mm version: 560 mm wide and 400 mm high Shipping will be secured on a pallet. (On some machines, as shown in the example image, there are drill holes for securing our counter holders. These holes do not affect the functionality in any way.) Please feel free to send inquiries by e-mail, and I can provide you with detailed photos of each model.

Būklė: geras (naudotas), Konvejerio ritinėliai, transportavimo ritinėliai, atsarginiai ritinėliai, konvejeris, ritinėlių takas, laikantieji ritinėliai Gusdpoyw Il Ajfx Af Dsa - Konvejerio ritinėliai: transportavimo ritinėlio skersmuo 50 mm - Transportavimo plotis: apie 500 mm - Velenas: matmenys žr. nuotraukose - Kiekis: Yra 118 vnt. transportavimo ritinėlių - Kaina: už vienetą - Bendri matmenys: Ø 50 x 540 mm - Svoris: 1,3 kg/vnt.

Būklė: naudotas, Techniniai duomenys: Darbinis plotis: 1100 mm 1 kalibravimo agregatas Veleno skersmuo: 160 mm 2 kombinuoti agregatai Veleno skersmuo: 160 mm Apdirbamo ruošinio aukštis: 160 mm Šlifavimo juostos matmenys: 2200x1130 mm Ištraukimo pajungimo skersmuo: 2x140 mm Elektrinis kėlimas Skaitmeninis ekranas Gedpfsyv Arzox Af Deua Avarinio sustojimo jungiklis Bendroji galia: 13 kW Įtampa: 380 V Bendri matmenys: Ilgis: 1900 mm Plotis: 1800 mm Aukštis: 2400 mm

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 223A011643003, garantijos trukmė: 12 mėnesiai, rėmo aukštis: 600 mm, rėmo plotis: 600 mm, Įranga: dokumentacija / vadovas, Frame size: 600 x 600 mm Gjdpeukvgrjfx Af Dsua Strap width: 5–12 mm Year of manufacture: 2016 Machine number: 223A011643003 Condition: Fully refurbished Features: ⦁ ASLF Anti-Strap-Loss Function / Permanent strap monitoring ⦁ Automatic strap feed ⦁ Adjustable strap width: 5–12 mm ⦁ DAT Direct-Access-Technology with torque-controlled, adjustable holding force ⦁ Adjustable conveyor speed ⦁ Mobile machine ⦁ Continuously adjustable table height ⦁ Package flow monitoring Special equipment: • Right-hand machine (viewed in direction of conveyor travel) • Emergency stop button integrated in Easy Control panel • Signal exchange: 2 x mating connectors with tool • Additional light barrier for integration with upstream or downstream equipment • Signal exchange: Do not strap package – to upstream machine • External button: Do not strap package • Strap tension dependent on package height (laser sensor) • Pneumatic package press (600x600) • Double press bar 600 • Entry-side strap draw-in protection on table top

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 410B010616004, garantijos trukmė: 12 mėnesiai, rėmo aukštis: 600 mm, rėmo plotis: 600 mm, Įranga: dokumentacija / vadovas, Serial Number: 410B010616003 Year of Manufacture: 2006 Godpjwd I Idsfx Af Dsua Strapping Band: 5-9 mm, spool core 200 mm, width 190 mm Conveying speed: 0.8 m/sec. – Conveyor height: 850 mm (30 packages/min for single strapping, 15 packages/min for parallel strapping) 12 months warranty (excludes: machine control unit, travel expenses, and wear parts) Features: ⦁ Extraction unit ⦁ Enhanced air blast, with package height detection via package press (bundle height less than 10 mm to approx. 3 mm minimum – depends on product) ⦁ Band sensor o Band ejector o Automatic band feed o Band cutting knife o Additional control buttons (START/STOP/EMERGENCY STOP) apart from main operator panel o Blow gun with spiral hose o Bundle height-dependent automatic band tensioning o Infeed and outfeed cycle control with complete 16-pin plug connection (by Walther) o Adjustable-height feet o Upper photoelectric sensor mounting o Power cable, length 3 m o Package detection sensor o Package stops – move away from the package when opened o Gentle package press (with laser) o Fixed plexiglass safety doors on the sides o Double press plunger o PLC control with jog dial operator panel o Quick-change reel system o Cycle-stop linking ⦁ Continuously adjustable table band drive (frequency inverter) ⦁ Electrical: Connection voltage 1 phase with neutral conductor or 2 phases at 198V, 208V, 218V, 220V – 240V, 390V – 410V, 450V – 500V 50 Hz or 60 Hz – Currently set to 400 V – 50 Hz –

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 223A011235001, garantijos trukmė: 12 mėnesiai, rėmo aukštis: 600 mm, rėmo plotis: 600 mm, Įranga: dokumentacija / vadovas, Frame size: 600 x 600 mm Strap width: 5-9 mm Year of manufacture: 2012 Machine number: 223A011235001 Condition: Fully reconditioned Our latest project involved the refurbishment of this fully automatic strapping machine, SMB CUBE 600x600c from 2012. At first glance and when looking at the price, you may recognize it as a used machine. But at the very latest, after seeing the list of replaced parts and hours of work invested, it becomes clear: this machine has been meticulously restored to its original delivery condition and is now as good as new—possibly even a bit better. Like-new thanks to CUPASO reconditioning With our fully reconditioned used machines, you acquire refurbished technology at used machine prices. We ensure that we only refurbish equipment that still meets today's requirements. This also applies to the offered SMB CUBE 600x600c. For this reconditioned unit, we also provide our comprehensive after-sales service, including a 12-month warranty and long-term supply of consumables, spare parts, and technical support. Prepared for integration into automated packaging lines Gusdpfst Uzv Tex Af Dea Even as a stand-alone unit, this CUBE can be individually configured for your requirements. The machine detects incoming packages or product stacks and straps them once or multiple times according to predefined parameters. Thanks to the pneumatic package press and package height-dependent strap tension, packages of different sizes and shapes can be processed unsorted and individually. With an additional identical machine, also available from us, cross or multiple strapping at high speed is possible. Our promise to you Our full 12-month warranty promise, of course, also applies to this SMB CUBE 600x600c. This means you are on the safe side: if anything should fail within this period, we will replace the defective component and install it at our cost (excluding wear parts and travel). Features: • Economical due to maximum availability • Robust and extremely low-maintenance design • Very easy operation • Minimal space requirement • Excellent cost/benefit ratio • Up to 35 packages/minute; depending on return stroke and frame size, without package pressing • Mobile machine (2 fixed/2 swivel castors with brake) • Table height 770 -1000 mm • Powered conveyors • Machine color: Frame RAL 7004 / Support RAL 7016 Special features: • Signal exchange: 2 x counter connectors with tool • Additional light barrier for integration with upstream or downstream equipment • Signal exchange: package not strapped • External button: package not strapped • Package height-dependent strap tension (laser sensor) • Pneumatic package press (600x600) • Twin press bars 600 • Infeed guard on tabletop, infeed side