Mado pirkti naudotą (3 777)

Sąlyga: naudotas, Amada Mega BS 400 SA, su pasukamu pagrindu, 1989 m. gruodis. Lhjdpjx Rkycefx Af Ieb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Panel saws Longitudinal and Crosscut Saw for PS 400 Longitudinal and Crosscut Saw for PS 400 Used 1999 Make: Longitudinal and Crosscut Saw for PS 400 Model: Longitudinal and Crosscut Saw for PS 400 Description: Longitudinal and Crosscut Saw for PS 400 Manufacturer: GOMAD Machine model/type: PS 400 Year of manufacture: 1999 Machine category: Longitudinal and Crosscut Saw Main blade adjustable up/down and tiltable Blade-to-blade operation Equipped with side sliding carriage Cutting length on carriage: 1500 mm Cutting width at fence: 1000 mm Main motor: 6 kW Table dimensions: 1020 x 1120 mm Lhjdpfx Afsgap Szo Iob With table extension With extension With scoring unit Max scoring blade diameter: 120 mm Scoring spindle diameter: 22 mm Scoring motor: 0.75 kW 3 spindle speeds: 2800/4000/5000 rpm Brake Extraction port diameter: 120 mm Dimensions (L/W/H): 250 x 120 x 120 cm Weight: 935 kg

Gamybos metai: 2011, Sąlyga: labai geros būklės (naudotas), SLIDING TABLE SAW GOMAD TYPE FBKSR For sale: GOMAD FBKSR panel saw, table length 3800 mm. Condition as shown in the photos, year of manufacture 2011, available with or without dust extraction, documentation and technical manual (DTR) included, machine in working order, price upon request. Lodjia Ngtopfx Af Ijhb The machine is equipped with a scoring unit, and the cradles are technically functional. Main saw blade: 400 mm, scoring blade: 100 mm. At a 45-degree angle, cutting length is 2800 mm, cutting width is 1250 mm; fence with electronic readout. Blade speed: 4000/5000/6500 rpm. Weight: 990 kg.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2020, veikimo valandos: 15 000 h, Task drilling machine WU, 5 units: one top, two front, two rear. Automatic. Unit selection. No collisions. Can be equipped with drilling heads. Lhodpfx Afeuc Tqdj Ieb

Sąlyga: naudotas, Max. cutting length: 3000 mm Max. sheet thickness: 12 mm steel CNC-controlled backstop up to 1000 mm Ledpfxjtx E E Ij Af Iehb Side gauge and table extensions Cutting length limiter Cutting edge illumination Light barriers for the rear area Spare blade Weight approx. 9000 kg

Sąlyga: naudotas, Pasiūlymas 41414 Kreipiamoji dalis štampavimo įrankiui, tinkama AMADA EMK 3612 tipui Lsdpfxexhfhmj Af Ijhb

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, * Gamyba gali skirtis priklausomai nuo uždaromo formato ir produkto. Ledpfex S Hyhsx Af Iohb

Sąlyga: labai geros būklės (naudotas), Catalogue number: 7853 TECHNICAL DATA - Maximum main saw blade diameter without scorer: 400 mm - Maximum main saw blade diameter with scorer: 350 mm - Main saw blade adjustable electrically (height and tilt) - Spindle diameter: 30 mm - Spindle lock Ledpfox H S Tiox Af Iohb - With sliding table - With side table and mitre fence - Sliding table length: 3000 mm - Cutting width at rip fence: 1350 mm - With side carriage - With scorer unit - Maximum scorer blade diameter: 120 mm - Scorer motor power: 0.75 kW - Main motor power: 6 kW - Motor for height adjustment: 0.25 kW - Motor for tilt adjustment: 0.25 kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220 x 650 mm - Table extension/expansion: 1920 x 1450 mm - Large blade guard - Extraction port diameter: 80 mm, 125 mm - Dimensions (LxWxH): 3500 x 3460 x 1500 mm - Weight: 1000 kg ADVANTAGES – Made in Poland – With scorer unit – Supplied with DTR documentation & CE certificate – Used panel saw, very good condition Net price: 23,900 PLN Net price: 5,690 EUR (based on exchange rate 4.2 EUR/PLN) (Prices may change with larger fluctuations)

Sąlyga: labai geros būklės (naudotas), Catalogue No. 7713 TECHNICAL DATA - Maximum workpiece width: 240 mm - Maximum workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal, 240 mm, 7.5 kW 2) Right vertical, 130 mm, 5.5 kW 3) Left vertical, 130 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW 5) Top horizontal, 240 mm, 5.5 kW (spindles 4 and 5 are electrically adjustable up/down) 6) Bottom horizontal, 240 mm, 5.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm *From above: - 8 feeding metal infeed rollers, geared, including 3 double rollers - 4 rubber-coated smooth outfeed rollers, including 2 double rollers *From below: - 3 smooth feed rollers - 3 side pressure rollers - Stepless feed speed adjustment via frequency inverter - Pneumatically loaded pressure rollers - Feed motor: 7.5 kW - Feed through Cardan shafts - Electric thickness adjustment - Lifting motor: 0.75 kW - Infeed table length: 2,480 mm - Pneumatic cabin opening/closing - Pneumatic table air blow-off - Central table lubrication - Extraction port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5,300 x 1,700 x 1,800 mm - Weight: 5,000 kg ADVANTAGES – Made in Italy Ledpfsw H Aqxjx Af Iohb – 6-head configuration – For processing both wet and dry wood – Pneumatic cabin opening – Pneumatic table air blow-off – Spindles 4 and 5 electrically adjustable – Used planer, in very good condition Net price: 136,900 PLN Net price: 32,600 EUR (based on 1 EUR = 4.2 PLN) (Prices may vary due to exchange rate fluctuations)

Sąlyga: labai geros būklės (naudotas), CATALOGUE NUMBER 7541 Lsdpfx Afsyaq Nhj Ijhb Technical data: - Maximum main blade diameter (without scoring unit): 400 mm - Maximum main blade diameter (with scoring unit): 350 mm - Blade bore diameter: 30 mm - Maximum cutting height for 400 mm blade: 120 mm at 90°, 85 mm at 45° - Maximum cutting height for 350 mm blade: 95 mm at 90°, 67 mm at 45° - Main blade adjustable in height and angle - Blade guard included - With side sliding table - Cutting length on sliding table: 1700 mm - Cutting width on sliding table: 1400 mm - Cutting width at fence: 1350 mm - Main motor: 6 kW - Table dimensions: 1190 x 990 mm - With table extension: 1880 mm - With table lengthening: 1890 mm - With scoring unit - Maximum diameter of scoring blade: 120 mm - Scoring spindle diameter: 20 mm - Scoring motor: 0.75 kW - 3 spindle speeds: 3500 / 4500 / 6000 rpm - Brake - Dust extraction outlet diameter: 80 / 120 mm - Dimensions (L/W/H): 3050 x 2200 x 1600 mm - Weight: 800 kg ADVANTAGES - Made in Poland - Operation and maintenance manual (DTR) included - Blade guard included - With scoring unit - With table extension and widening - Used saw, in very good condition Net price: 15,900 PLN Net price: 3,780 EUR (calculated at 4.2 EUR/PLN) (Prices may change depending on currency fluctuations)

Sąlyga: geras (naudotas), Gamybos metai: 2011, WALTER FWR 500/2 Format Circular Saw for Beam Cutting Ljdpfxjh Dwmlo Af Ijhb - Made in Poland - Operating and Maintenance Manual (DTR), CE Certified - Year of manufacture: 2011 TECHNICAL SPECIFICATIONS: - Minimum processed material length: 800 mm - Maximum processed material length: 1600 mm - Maximum material width: 480 mm - Maximum material thickness: 145 mm - Saw blade diameter: 500 mm - Continuously adjustable feed rate: 0–20 m/min - Main motor power: 2 x 5.2 kW - Feed motor power: 1.5 kW Machine dimensions: 340 x 230 x 180 cm Weight: 2,500 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Shaft Multi-blade Saw WALTER WD 250/350 30 and 37 kW - Made in Poland - Year of manufacture: 2012 - Technical documentation (DTR) and CE certificate TECHNICAL SPECIFICATIONS: Cutting height: 170 mm Cutting width: 350 mm Spindle diameter: 2 x 70 mm Saw blade diameter: 300 mm Spindle motor: 30 kW and 37 kW Feed motor: 1.5 kW Seven lower feed rollers Two upper toothed feed rollers Infeed table length: 3000 mm Connector diameter for waste extraction under machine: 2 x 200 mm (belt conveyor) Ledpfx Afjmv Elps Ishb Dimensions (L/W/H): 320 / 200 / 200 cm Weight: 2000 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Vecoplan Sawmill Offcut Chipper 45/16/2V - German-made - Produces ideal chips for direct boiler feeding - Equipped with vibrating conveyor system TECHNICAL SPECIFICATIONS: Lhjdpfx Afot Hr Drj Ijb - Width: 450 mm - Height: 160 mm - Number of knives: 2 pcs - Motor power: 50 kW - Rotor diameter: 500 mm - Rotor length: 475 mm - Screen: 40 x 40 mm - Upper feed gear shaft: 4 kW - Lower feed gear shaft: 2.2 kW - Reversing function - Vibrating infeed conveyor: 10,500 mm x 450 mm, 2.2 kW motor - Cross vibrating conveyor: 4,500 mm x 2,200 mm, 1.5 kW motor - Height: 2,450 mm Transport dimensions: 10,500 mm x 2,450 mm x 2,450 mm Weight approx. 4 t

Sąlyga: geras (naudotas), Gamybos metai: 1996, Four-Sided Planer Weinig Unimat 23 – German-made – Serrated table – Year of manufacture: 1996 Lhodpoh Dwl Dofx Af Ijb – Driven feed rollers in the table TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 160 mm Serrated table Spindle diameter: 40 mm 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 11 kW 5th bottom spindle: 7.5 kW Infinitely variable feed speed: 6–36 m/min Feed motor power: 5.5 kW Six upper steel feed rollers Two upper rubber feed rollers Three driven rollers in the table Pneumatic feed pressure Pneumatic pressure shoe Spindles with brakes Infeed table length: 1970 mm Electric height adjustment Centralized (split) lubrication Extraction port diameter: 140 mm Machine dimensions (L/W/H): 410 / 200 / 180 cm Weight: approx. 3000 kg

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, CORMAK WS1000TA Spindle Moulder is a technologically advanced machine designed for professional wood processing in joinery workshops, furniture factories, and production plants. Thanks to its tilting spindle, large cast iron table, and precise tool guidance system, the moulder allows for efficient and accurate machining of both straight and profiled components. Key Features - Tilting spindle from +5° to -45° – enables beveling, rabbeting, and creation of special shapes. - Large, heavy-duty cast iron worktable – ground and polished for perfect glide and stability. - Four-speed spindle: 1800 / 3000 / 6000 / 9000 rpm – flexibility for working with various materials and tools. - Rigid, steel frame structure – provides vibration damping and precise operation even under heavy loads. - Spindle stroke 100 mm and max. tool diameter 180 mm – allows use of a wide range of cutters. - Precise spindle and fence adjustment – ensures accurate machining and dimensional repeatability. - Easy tool change – optimized access to the spindle assembly shortens setup time. Construction and Technology The CORMAK WS1000TA spindle moulder is engineered for durability and functionality in serial production environments. The machine body is made of thick-walled steel plates for high rigidity and resistance to deformation. The main table, measuring 1000 x 360 mm, and the optional sliding table, 1000 x 240 mm, enable effective handling of long workpieces. The 2.8 kW (S1) / 3.9 kW motor delivers the power required for processing solid timber and wood-based materials. Lhjdpfeycu Awjx Af Isb Precision and Efficiency This machine supports precise milling operations, including angled machining. The tilting spindle allows for non-standard tasks, and the accurate spindle guidance on the column eliminates play and improves finish quality. The V-belt transmission guarantees quiet and stable operation across all speed ranges. Applications The CORMAK WS1000TA spindle moulder is ideal for: - professional carpentry workshops, - production of door and furniture components, - machining tenons, grooves, rebates, and decorative profiles, - angle cutting and curved milling (with attachment). Standard Equipment - 30 mm spindle - Side and top material hold-downs - Precision milling fence - Curved milling attachment - Angle fence - User manual (Polish) - CE declaration of conformity Optional Equipment - Sliding table (1000 x 240 mm) – shown in photos - Mechanical feed systems - Specialized guards and guides Technical Specifications CORMAK WS1000TA Spindle Moulder – Angles and Specifications Spindle diameter [mm]: 30 Spindle speed [rpm]: 1800 / 3000 / 6000 / 9000 Spindle stroke [mm]: 100 Table dimensions (L x W) [mm]: 1000 x 360 Sliding table dimensions (optional) [mm]: 1000 x 240 Table height [mm]: 900 Max. cutter diameter [mm]: 180 Spindle tilt [°]: +5 to -45 Motor power [kW]: 3.9 Motor power S1 100% [kW]: 2.8 Weight [kg]: 270 Warranty [months]: 12 User manual (DTR)

Sąlyga: labai geros būklės (naudotas), Catalog number 7871 TECHNICAL DATA - Maximum workpiece width: 1300 mm - Maximum workpiece height: 170 mm 2 units: 1) Grooved rubber roller for calibration 2) Grooved rubber roller + sequential pad + metal roller – Upper section: 2 rubber pressure rollers First unit: - Rubber pressure roller Second unit: - Rubber pressure roller - Cleaning brush - Rubber pressure roller – Lower section: - 3 rubber idler rollers - Feed belt - 3 rubber idler rollers - Pneumatic belt oscillation with photocell control - Electric table lifting - Pneumatic brake - Stepless feed speed adjustment via gear motor - Vacuum pump - Main motor: 15 kW - Feed motor: 1.5 kW - Pump motor: 4.6 kW - Operating pressure: 6-8 bar - Extraction outlet diameter: 2x150 mm, 2x80 mm, 4x70 mm, 120 mm - Overall dimensions (L/W/H): 1700x2250x2400 mm + pallet Lhedpjx U Urqofx Af Iob - Dimensions for transport (L/W/H): 1700x2250x2140 mm + pallet - Weight: approx. 2000 kg ADVANTAGES – Made in Italy – 2 sanding units – Sequential pad – Vacuum pump – Not repainted – Used sander in very good condition Net price: 39,900 PLN Net price: 9,500 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Sąlyga: naujas, Gamybos metai: 2026, The BS370H is a powerful and reliable semi-automatic band saw for angled cutting from -45° to +60°, equipped with a hydraulically operated vice and saw arm. This indispensable machine in any metalworking workshop is ideal for cutting pipes, profiles, and solid materials. The blade guides are fitted with special carbide inserts and bearings, which has a significant impact on blade tracking, service life, straightness, accuracy, and cutting quality. Carbide guidance greatly reduces machine and blade wear. The machine is equipped with a high-performance coolant pump in a closed-loop system. Power transmission is via a worm gearbox. The machine features a three-phase motor with two cutting speeds and thermal motor protection. The saw is fitted with a TENSOMETER GAUGE – a blade tension sensor – and an automatic shut-off should the saw blade break. The upper part of the base forms a tray for coolant runoff and collecting chips generated during cutting. A cast iron worktable with a swiveling arm and a separate control panel is mounted to the base. During cutting, the main cutting motion is the movement of the saw blade, while the feed is the downstroke of the saw arm. The arm downstroke speed (cutting speed) is steplessly adjusted by a hydraulic cylinder. • Saw for precision, professional work. • Torsion-resistant, rigid arm and saw body made of spheroidal graphite cast iron. • Double-sided vice with fast locking. • In semi-automatic mode, after pressing START, the hydraulic vice clamps the material, the hydraulics lower the saw arm, a limit switch signals the end of the cut, and the hydraulics raise the saw arm. Technical Data Blade size: 3160 x 27 x 0.9 mm Blade tension: mechanical (manual) Blade speeds: 34, 68 m/min Arm descent adjustment: stepless - hydraulic cylinder Lhjdpfx Ajycqhcef Isb Vice base height: 890 mm Saw wheel diameter: 380 mm Power supply: 3-phase, 400V Total power: 1.5 kW Coolant pump motor power: 46 W Overall dimensions (with base): 1850 x 950 x 1500 (2050) mm Weight: 491 kg

Sąlyga: labai geros būklės (naudotas), Multi-blade shaft saw FOD BYDGOSZCZ* DPPA III 50E 620/120 Catalogue number: 7407 TECHNICAL SPECIFICATIONS - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of shaft with saws: 620 mm - Maximum saw blade diameter: 450 mm - Saw blade bore diameter: 90 mm From above: - Kickback pawls - 2 geared feed rollers From below: - Kickback pawls - 2 smooth feed rollers - Saw shaft - Smooth feed roller - 2 feed speeds - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2370x1400x1800 mm - Weight: approx. 3000 kg – Made in Poland – Used machine, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations) Ljdpfxex Uz S Do Af Ijhb * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes to facilitate product identification. We only resell items previously introduced to the market by the manufacturer. We have no business relationship with the manufacturer.

Sąlyga: naujas, Gamybos metai: 2026, The CORMAK OS-1 Welding Rotator is a professional tool for welding and processing cylindrical workpieces. This device combines a robust construction with high precision, ensuring optimal conditions for performing welded joints. It is ideally suited for both series production and single-piece operations, offering reliability and repeatable results. Key machine advantages: - High load capacity up to 1000 kg horizontally – allowing work with various pipe and cylindrical elements - Adjustable rotation speed from 80 to 1500 mm/min – enabling adaptation to welding process requirements - Remote control via foot pedal – complete process control without the need to interrupt the work cycle - 5 cm wide rollers made from durable material – ensuring stable guidance of the workpiece - Compact design – easy installation in production facilities with limited space Construction and technology The CORMAK OS-1 rotator features a dual-roller design with durable, noise-reduced guide rollers. The body is made from thick-walled steel, guaranteeing rigidity and resistance to vibration during operation. The drive motor provides smooth start-up and precise maintenance of the set linear speed. Construction features: - High-quality electric motor with a high-torque gearbox - Steel rollers with a protective coating for extended service life - Adjustable spacing mechanism for handling different workpiece diameters - Protective housing shielding the drive and control systems Precision and performance Thanks to the precise drive system and adjustable rotation speed, the CORMAK OS-1 ensures high-quality welds with full repeatability. The device minimizes operator fatigue and eliminates the need for manual rotation of heavy components. Applications The CORMAK OS-1 welding rotator is used in: - Welding of pipes and pressure vessels - Production of boilers and cylindrical structures - Petrochemical and chemical industries Lhedpfx Ajycfvzjf Ieb - Metalworking and repair shops - Serial and custom manufacturing Standard equipment - Remote control foot pedal - Set of guide rollers - Operating manual Technical specifications Power supply: AC 230V 50Hz Horizontal load capacity: 1000 kg Workpiece diameter: 25–1400 mm Linear speed range: 80–1500 mm/min Roller dimensions: Ø 250x50 mm Gross weight: 80 kg Overall dimensions: 600 x 550 x 380 mm

Sąlyga: labai geros būklės (naudotas), CATALOG NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/backward + inverter-controlled - Maximum number of circular saw blades on upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimensions of additional extension: 3700x520x950 mm - Extraction port diameter: 3x200 mm - 3 rows of anti-kickback fingers before the saw blades - 1 row of anti-kickback fingers after the saw blades - Dimensions (L/W/H): 6010x1500x2000 mm - Weight: approx. 1400 kg ADVANTAGES – Made in Poland, WALTER brand – Additional 3000 mm track extension – DTR documentation – used machine, in very good condition Net price: 37,900 PLN Net price: 9,020 EUR (based on exchange rate 4.2 EUR) (Prices may change with larger fluctuations) Ledsx E Shwepfx Af Iohb

Sąlyga: naujas, Catalogue number: H0561 – Brand new machine, in stock – CE certificate Lodpfsvwlfbjx Af Ijhb – Made in Austria – Professional grade – Trolley on steel rods TECHNICAL DATA Motor power S1 5500W (/750) Voltage 400V / 50Hz Table height 890mm Extraction port 100mm Sliding table 3200x435mm Extension table 1200x550mm Max. cutting width with fence 1300mm Blade diameter 250-400mm (30) Scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm Blade speeds I: 3000; II: 4000; III: 5000 rpm Scoring blade speed 8000 rpm Scoring motor power 750W Blade tilt 0-45° Sound power level 90 dB(A) Sound pressure level 88.2 dB(A) Overall machine dimensions (L/W/H) after setup 3350x3600x900mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110kg Features: – Robust construction – Equipped with a large aluminium sliding table and boom, ideal for handling and sizing large and heavy panels – Cast iron worktable (1100 x 700 mm), including table extension (900 x 830 mm) and table outfeed extension (610 x 600 mm), all with sturdy steel structures – Extension table (1200 x 550 mm) + cross-cut fence (1950 – 3300 mm) – Scoring unit with its own separate motor – Manually adjustable main saw blade tilt 0°-45° (angle indicated via scale) – Electric height adjustment for the main saw blade and scorer Scope of delivery: Main blade LEUCO TCT (Ø300 x 30 x 3.2 mm T72) Scoring blade LEUCO (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – optional Net price: 24,300 PLN Net price: 5,750 EUR depending on the rate of 4.20 EUR (Prices may vary depending on higher fluctuations)

Sąlyga: labai geros būklės (naudotas), A roll forming line equipped with rollers for the cold forming of office and storage cabinet fronts made from cold-rolled sheet metal. Roller center distance: 140 mm, Lhjdpfjwxv H Djx Af Ieb Roller diameter: 45 mm, Keyway: 12 mm. The system features an electric mechanism for moving the roller sets apart by up to 1500 mm. The machine is electrically operated.

Sąlyga: geras (naudotas), Gamybos metai: 2007, SCM Compact XL Four-Sided Planer Ledpfx Afehrdmij Ijhb – Made in Italy – Year of manufacture: 2007 TECHNICAL SPECIFICATIONS: Planing width: 230 mm Planing height: 120 mm 1) Bottom horizontal spindle 230 mm – 5.5 kW 2) Right vertical spindle 130 mm 3) Left vertical spindle 130 mm (2nd and 3rd spindle) – 11 kW 4) Top horizontal spindle 230 mm – 7.5 kW All spindles: up/down, right/left Spindle diameter: 40 mm From above: 3 steel infeed rollers, knurled, including 2 double rollers From above: double outfeed roller, rubber-coated Side pressure unit: 1 pc Feed roller in lower table: rubber-coated Feed on Cardan shaft rollers Pneumatic pressure units Infinitely variable feed speed: 5–22 m/min Feed motor: 1.1 kW Electric planing thickness adjustment Motorized lifting: 0.37 kW Infeed table length: 2470 mm Enclosed in sound-insulated cabin Centralized table lubrication Extraction port diameters: 150 and 180 mm Dimensions (L/W/H): 3650 x 1200 x 1600 mm Weight: approx. 1500 kg

Sąlyga: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Production line for packing, blending, filtering and homogenizing of dry products from 2 manufacturers - D.H.T. van den Dikkenberg and BTH (Premier Tech) The line is suitable for both food and feed purposes and has a producing capacity of 3 mt per hour. All dairy powder and powders of plant origin can be used, such as milk powder (SMP/WMP), whey powder, buttermilk powder, powder of milk permeate, lactose, dextrose, whey protein/fat concentrates, FFMP, soy protein, pea flour etc. The number of blended ingredients is unlimited. The line for the production & packing of dry blends: - meets the requirements for materials in contact with food products; - is made of durable materials that don't change the smell and taste of food products, don't absorb moisture, are corrosion-resistant and safe to use; - all surfaces are resistant to repeated exposure to cleaning and disinfecting agents; - is designed and manufactured in such a way that there are no cavities inside in which the processed products accumulate, and this would not create conditions for contamination of the manufactured products; - is mounted in two 40 foot sea containers, which ensures easy transportation of equipment. The production line has the following units: 1) two-stage filtering of the poured raw materials through coarse and fine sifting sieves First, the raw materials are sifted through a sieve with eyes of 5 mm in diameter. At this stage, foreign impurities and hardened particles over 5 mm are separated. After that the raw materials are sifted through a second sieve with eyes of 0.2 mm. In this way, all foreign particles over 0.2 mm are completely separated from the raw materials. 2) mixing of components into a homogeneous blends The mixing process in a horizontally located mixer is very gentle. The blended ingredients remain undamaged and retain their structure, which is very important for the products of instant category. 3) dosing of finished products into bags The line is equipped with a dispenser, which is technologically connected to automatic scales. It allows to select and set the desired volume of the packed product. Standard packaging options are bags of 20-25 kg net. 4) suction of excess air An integrated vacuum unit helps to suck out of the filled bags an excess air. The product becomes denser, less airy, and when stacking the bags pallets, the entire structure becomes more stable. This is very important for the safety of the cargo during transportation. 5) heat-sealing of the inner poly liner The line is equipped with a heat sealing unit (BTH BV), which is used to seal the inner poly liner. Sealing the liner ensures its tightness, which helps to prevent the moisture penetration into the finished product. Ljdpfjwhf Ddsx Af Ijhb Since the powder is very hygroscopic product, its reliable protection from moisture is very important for preserving the quality of the manufactured products. 6) sewing of paper bags with/without crepe paper The line also has an integrated sewing unit (sewing head - Fischbein SA) for closing of the paper bags (type - open mouth). For more reliable tightness of the packaging, a crepe paper tape in the same colour as the bag may be used additionally. The line is equipped with 3 bunkers with a capacity of 1mt each: 1) raw material blending bunker; 2) product settling bunker after blending; 3) finished product bunker. The line has a high production efficiency and very easy maintaining and operation.

Sąlyga: naudotas, Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, Industrial polyethylene bag/poly inserts sealing machine BPM-650 Manufacturer - Bouwpaco BV (The Netherlands) Year of manufacture - 1994 Designed for sealing of polyethylene bags or polyethylene inserts into paper bags (or bags made from other materials). Sealing width - up to 70 cm. Bag height, temperature and sealing time are adjustable. Lhedpewwt Ntjfx Af Iob The machine is fully equipped, works perfectly, is technically efficient, very little used. The device is characterized by high efficiency combined with easy and simple operation. Manual instruction (in German) and a wiring diagram are included.