MADREW DCKKH 30 diskinis pjūklas

madrew dckkh 30

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Ndedpfx Adou Uh T Dsned Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naudotas, Gamybos metai: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Cross-Cut System Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: - Infeed lengths min./max. 3000 - 5000 mm - Infeed widths min./max. 80 - 200 mm - Infeed thicknesses min./max. 38 - 80 mm - Maximum wood cross-section: 200 x 50 mm - Final wood length min./max. 700 - 1000 mm - Average number of cuts per board: 5 - Types of wood: softwood or hardwood Machine performance: - Max. feed speed: 180 m/min, infinitely variable - Time per cutting operation incl. braking: 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt, positioned before the saw - Length: 1.5 m, coupled with saw feed motor Pos. 2: Automatic cross-cut saw OptiCut 200-1, left-hand version - Equipped with integrated length measuring wheel and built-in waste air blast mechanism - Graphic input terminal, 1/4 VGA display, with numeric keypad and function keys, with OptiCom software package for system control - The machine is loaded from the left Pos. 3: Outfeed conveyor / sorting station Ndedsu Atmujpfx Adnsd - With drive unit, without ejector - Belt length approx. 1.5 m Machine already dismantled and stored - The infeed table was not used by the previous owner. Two feed rollers were mounted for material infeed. The feed table is available, only the rubber belt is missing. For sale on behalf of customer, ex-site Austria, without transport and assembly - Errors in description and price are reserved - Transport and loading by us optional To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure and previous owner, without guarantee - Subject to prior sale - For used machines, any guarantee/liability is excluded; 'sold as inspected' applies - Photos and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Sąlyga: naudotas, Gamybos metai: 1974, Contact ATS Norway for more information. Please state the reference number upon inquiry: 20713 Specifications: - Model year: 1974 - Operating hours: unknown - Weight: 10,400 kg - Tires (see photos) - Tracks - Drawer in working order - Width: approx. 2.5 m - Maintenance to be carried out by buyer - Available immediately Nsdpfewq Uygsx Adnsdd Notes: - Weak battery - The owner states it is operational, but some maintenance is likely required. Net weight: 10,400 kg Gross weight: 10,400 kg Width: 250 cm Model: LM 846

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 220992, STROMAB CROSSCUT SAW WITH ELECTRONIC PUSHER MOD. TR 500 MATRIX – CE STANDARDS – USED - infeed roller table and MATRIX electronic pusher 6000mm - outfeed table 1500mm - 10 HP motor - blade diameter: 500mm - blade rotation speed: 3500 rpm - maximum cutting capacity: 360 mm (W) x 55 mm (H); 200 mm (W) x 135 mm (H) Ndodpfx Adst U I A Hjnod - minimum cutting section: 20 (W) x 10 (H) mm - ELCO CNC control - 415 volt - s/n 220992 - year 2002

Sąlyga: naudotas, IDC000100 Komplett Sägewerk - Valon Kone VK26M mit Ein- und Auslauftransporteuren - Rundumlaufsystem (Merry-Go-Around) - ARIVislanda KS12, 2 x 37 kW - ARI Nachschnittsäge Ndjdevgdy Aopfx Adnod - ARI KL10 Spanersäge - Soderhamn Eriksson 519C, Kantenhobel mit Hackachsen - Bruks Hacker 1300 Komplett mit Steuerung und Mechanisierung.

Sąlyga: beveik kaip naujas (naudotas), Min. input length: 500 mm, max. 6 m. Cross-section: max. 140 x 250 mm Motor: 5.5 kW Saw stroke via servo pendulum Feed via rollers, 6 pieces on top, 6 pieces below CNC control Maxi 8.0 1 x sorting unit, each 11.5 m Machine will be configured according to your requirements Nedjr A Et Topfx Adnodd

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, Four-side beam planer working dimensions: 450x300 mm complete with automatic chamfering units motorized height and width adjustment Tersa planer heads No. 4 motors, 15 kW each No. 2 roller conveyors, L=6000 mm Nodpethmifsfx Adnjdd CE certified machine with new soundproof cabin

Gamybos metai: 1992, Sąlyga: geras (naudotas), Overhead crane, crane, electric wire rope hoist, hoisting unit, motorised winch, motor winch, chain hoist, traction winch, pulley block - Manufacturer: Stahl, crane trolley with electric wire rope hoist - Crane trolley: Type GO 24 20 16 - Travel speed: 20 m/min - Wheelbase: 800 mm - Wire rope hoist: Type AS 2010 - Pulling force: 1000 kg / Lifting capacity 4000 kg - Drum speed: 16 m/min / Lifting speed 4 m/min - Lifting height: mm Ndsdjl Tuvdopfx Adned - Transport dimensions: 1250/1180/H400 mm - Dead weight: 356 kg

Sąlyga: naudotas, rida: 835 837 km, galia: 309 kW (420,12 AG), pirmoji registracija: 11/2010, bendras svoris: 26 000 kg, kuro tipas: dyzelinas, spalva: geltonas, ašių konfigūracija: 6x2, didžiausias leistinas svoris: 16 420 kg, tuščias svoris: 9 580 kg, padangos dydis: 315/80R22.5, kuras: dyzelinas, ratų bazė: 4 800 mm, stabdžiai: intarder, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 5, pakaba: kitas, Gamybos metai: 2010, bendras ilgis: 9 480 mm, sėdimų vietų skaičius: 2, statybinis aukštis: 3 850 mm, lovų skaičius: 1, Įranga: ABS, borto kompiuteris, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, trauki kontrolė,

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Tested, functional equipment, used edge banding machine BIESSE Polymac LATO 38 model Nedpfxsuhm Ado Adnsdd - Glue pot - Guillotine (pre-cutting unit) - Front / rear end trim saw - 1 tiltable top/bottom flush trimming unit - 2 tiltable top/bottom flush trimming units - Outfeed brushes Possibility to test the machine at our premises Machine can be inspected in our Cosne workshop Price includes loading onto truck