Mco pirkti naudotą (298)

Būklė: naudotas, pirmoji registracija: 06/2001, Gamybos metai: 2001,

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 02/1997, pakaba: hidraulika, padangos dydis: 245/70R17.5, ratų bazė: 10 670 mm, spalva: raudona, Gamybos metai: 1997, Įranga: ABS,

Būklė: naudotas, Gamybos metai: 2009, Country of manufacture: NL Ijdsyrtm Tspfx Agfotd Please contact Theo Lelie for further information.

Būklė: labai geros būklės (naudotas), ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 15 500 mm, krovinių skyriaus plotis: 2 740 mm, krovos erdvės aukštis: 1 050 mm, bendras ilgis: 15 500 mm, bendras plotis: 2 740 mm, pakaba: hidraulika, padangos dydis: 245/ 70R17.5 | load index 146/146F, spalva: mėlyna, Gamybos metai: 2003,

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2007, krovimo vietos ilgis: 9 230 mm, krovinių skyriaus plotis: 2 520 mm, krovos erdvės aukštis: 910 mm, bendras ilgis: 13 840 mm, bendras plotis: 2 540 mm, bendras aukštis: 1 600 mm, pakaba: oras, padangos dydis: 245/70R17.5, ratų bazė: 7 950 mm, spalva: raudona, Gamybos metai: 2007, Įranga: ABS,

Būklė: labai geros būklės (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 03/2001, bendras ilgis: 19 800 mm, bendras plotis: 2 500 mm, bendras aukštis: 1 590 mm, pakaba: oras, padangos dydis: 235 / 75 R17.5, ratų bazė: 1 360 mm, spalva: smėlio spalvos, Gamybos metai: 2001,

Būklė: naudotas, Gamybos metai: 2005, veikimo valandos: 11 447 h, 2005 | Kleemann MOBICONE MCO 11 D3 | Used crusher | 11,447 operating hours 📍Location: France Itodpox S Sibofx Agfsd 🚛 Delivery available to your location – Use our shipping calculator for a transport cost estimate! 💰 Buy Now for EUR 198,000 or Make an Offer. Payment upon delivery possible for a small fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 78 inspection points: 70 approved ✅ 7 with minor imperfections ℹ️ 1 issue ⚠️ 📌 Inspector’s Comment: Good overall condition of the machine, wear to bodywork and paintwork is consistent with the machine’s age but remains very well preserved. The crusher could not be tested due to a hydraulic pump issue. The undercarriage tracks require attention. The conveyor belts are in perfect condition. Crusher chamber and feeding walls should be scheduled for replacement. Overall machine condition is good. 📄 Want to see the full inspection report, extra photos, or a video? Tip: The reference "38913 Equippo" is commonly used for further online research. 💡 Why choose this machine and our service: ✔ Professionally inspected ✔ Direct jobsite delivery available ✔ Money-back guarantee ✔ Secure and flexible payment methods 🔄 Considering other equipment options? We provide useful tools and resources for machinery owners and operators – all easily accessible on our platform.

Būklė: naudotas, Gamybos metai: 2008, bendras ilgis: 4 500 mm, bendras plotis: 1 700 mm, bendras aukštis: 1 200 mm, Tuščias svoris: 7.000 kg - Pagaminimo metai: 2008 - Dokumentacija prieinama: Ne - CE ženklinimas: Taip - CE sertifikatas prieinamas: Ne - Serijos numeris: 20830013 - Valdymas: Teach-in - Volelių skaičius [vnt.]: 3 - Galia [kW]: 11,0 - Maks. lakšto storis [mm]: 16 - Maks. darbinis plotis [mm]: 2000 Itodpfx Agoxdigfofed - Transportavimo matmenys: 4500mm x 1700mm x 1200mm (i x p x a) - Transportavimo svoris [kg]: 7000kg Finansinė informacija PVM: Nurodyta kaina be PVM PVM/pvm atskaita: PVM grąžinamas verslui Pristatymas ir įrenginių keitimas galimi bet kada visoms pramoninėms prekėms. Lukas van Rossum

Būklė: naujas, Gamybos metai: 2025, plieno lakšto storis (maks.): 2 mm, stalo aukštis: 825 mm, Galinio stabdiklio eiga, R ašis: 630 mm, įėjimo įtampa: 380 V, bendras svoris: 1 360 kg, bendras ilgis: 2 700 mm, bendras plotis: 1 500 mm, bendras aukštis: 1 200 mm, garantijos trukmė: 12 mėnesiai, pjovimo ilgis (maks.): 2 050 mm, darbinis ilgis: 2 050 mm, Įranga: dokumentacija / vadovas, pirštų apsauga, Mechanical sheet metal guillotine METFORMER Itodpfxjvlxh Eo Agfsd MCO 2×2050 mm The guillotine is made entirely of steel, with a robust and heavy-duty design. Its straightforward construction features an attractive appearance and is easy to operate. This guillotine is widely used for cutting thin and medium steel sheets in light machinery manufacturing and equipment production. The blade is made from high-strength alloy steel. Very precise back gauge. Technical specifications: Model: MCO 2×2050 Motor power: 3.0 kW Maximum sheet thickness: 2 mm Number of blade positions: 4 Length: 2700 mm Width: 1500 mm Height: 1200 mm Weight: 1360 kg

Gamybos metai: 2021, būklė: naudotas, PHCbi MCO-170AICUVH-PE CO2 Incubator Cabinet with H2O2 Decontamination Iodpfotxakxjx Agfstd Temperature Range: AT +5 ~ +50°C, ±0.1°C Temperature Uniformity: ±0.25°C CO2 Control Range and Variation: 0 ~ 20%, ±0.15% Year of Manufacture: 2021 Dimensions: 650mm x 620mm x 1000mm (external) 480mm x 500mm x 650mm (internal) Weight: approx. 80 kg PHCbi Successful cell culture requires an incubator offering a high degree of precision, safety, and user-friendly operation. IncuSafe provides a range of cell culture incubators equipped with advanced technologies that ensure unrivalled temperature and CO2 (and, on some models, O2) control during the cultivation of various cell types. These units deliver long-term performance, are highly reliable, and efficient. - inCu-saFe® Chamber (proactive contamination control, copper-enriched stainless steel alloy): Combines the antimicrobial properties of copper with the corrosion resistance of stainless steel. - SafeCell UV Proactive Contamination Control: The cell culture-isolated UV lamp decontaminates circulating air and water in the humidity pan, without harming cell cultures. - H2O2 Decontamination Technology: PHCbi's unique high-speed decontamination system uses gaseous H2O2 to provide quick, documented chamber decontamination with a high safety level. Electronic door lock automatically secures the chamber during the decontamination phase. - Dual Hot-Air Sterilization (+180°C): Enables uninterrupted operation and unaffected performance of stacked incubators during the sterilization cycle (Model: MCO-170AICUVD-PE). - Long-term high performance, optimal cell viability, and successful experiments. Precise control of CO2 concentration and temperature is ensured, with easy operation and maintenance. - Patented DHA Direct Heat and Air Jacket System*: Provides high-precision temperature control for enhanced temperature stability and rapid temperature recovery after door openings. - Fast CO2 Recovery: The PID controller and dual infrared sensor ensure ultra-fast CO2 recovery without overheating, even after multiple door openings. - Unique solid-state O2 zirconia sensor in multigas incubators enables precise physiological oxygen control to simulate in-vivo conditions. Description as provided. On-site inspection is welcome. We can arrange cost-effective shipping upon request! You will receive a proper invoice. For international customers, a net invoice can be provided if a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our current offers. Mentioned company names and trademarks are the property of their respective owners and are used solely for identification and product description. Technical data deviations and errors in the description may occur and are subject to change.

Gamybos metai: 2020, būklė: naudotas, PHCbi MCO-170AICUVH-PE CO2 Incubator Cabinet with H2O2 Decontamination Temperature range: Ambient +5 to +50°C, ±0.1°C Temperature uniformity: ±0.25°C CO2 control range & fluctuation: 0–20%, ±0.15% Year of manufacture: 2020 Dimensions: 650mm x 620mm x 1000mm (external), 480mm x 500mm x 650mm (internal) Weight: approx. 80 kg PHCbi The creation of successful cell cultures requires an incubator that offers a high degree of precision and safety as well as ease of use. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unparalleled temperature and CO2 (and, in some models, O2) control to support the handling of various cell cultures. These incubators deliver long-term performance, are extremely reliable, and highly efficient. - inCu-saFe® chamber (proactive contamination control, copper-enriched stainless steel alloy): Combines the antimicrobial properties of copper with the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: The UV lamp, isolated from the cell cultures, decontaminates the circulating air and water in the humidification pan without harming the cultures. - H2O2 Decontamination Technology: PHCbi’s unique high-speed decontamination system uses gaseous H2O2 to enable fast and fully documented chamber decontamination with a high level of safety. The electronic door lock automatically seals the chamber during decontamination. - Dual hot-air sterilization (+180°C): Allows uninterrupted operation and no interference between stacked incubators during sterilization cycles (Model: MCO-170AICUVD-PE). - Consistent long-term performance ensures optimal cell viability and successful experiments. Precise CO2 and temperature control is achieved with easy operation and maintenance. - Patented DHA direct heating and air jacket system*: High-precision temperature control for superior temperature uniformity and rapid recovery after door openings. - Rapid CO2 recovery: PID controller and dual infrared sensor enable ultra-fast CO2 recovery without overheating—even after multiple door openings. - Unique solid-state O2 zirconia sensor (in multigas incubators) allows for accurate physiological oxygen concentration control to simulate in vivo conditions. - Condensation control: Prevents unwanted condensation and potential contamination inside the chamber. Text as supplied. You are welcome to arrange an inspection. We can also organize cost-effective shipping for you upon request! You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT identification number is supplied. Sale subject to prior sale. Visit our shop to view our other offers as well. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Itjdotxaczspfx Agfsd Please note: Technical data may vary, and errors in the article description cannot be ruled out and are reserved.

Gamybos metai: 2020, būklė: naudotas, PHCbi MCO-170AICUVH-PE CO2 Incubator Cabinet with H2O2 Decontamination Temperature Range: AT +5 ~ +50 °C, ±0.1 °C Temperature Uniformity: ±0.25 °C CO2 Control Range and Variation: 0 ~ 20%, ±0.15% Year of Manufacture: 2020 Dimensions: 650mm x 620mm x 1000mm (external) 480mm x 500mm x 650mm (internal) Weight: approx. 80 kg PHCbi Iedpfx Agstxarcofjtd Successful cell cultures require an incubator that provides a high level of precision, safety, and is user-friendly. IncuSafe offers a variety of cell culture incubators that utilize advanced technologies for unrivaled temperature and CO2 (and with some models O2) control during the handling of various cell lines. These provide long-term performance, are highly reliable, and efficient. - inCu-saFe® Chamber (proactive contamination control, copper-enriched stainless steel alloy): combines the germicidal properties of copper with the corrosion resistance of stainless steel. - SafeCell UV proactive contamination control: cell culture-isolated UV lamp decontaminates recirculating air and water in the tray, without harming the cell cultures. - H2O2 Decontamination Technology: PHCbi’s unique high-speed decontamination system uses gaseous H2O2 for documented, rapid chamber decontamination, providing a high level of safety. Electronic door lock automatically secures the chamber during decontamination. - Dual hot air sterilization (+180 °C). No disruption or downtime with stacked incubators during the sterilization cycle (model: MCO-170AICUVD-PE). - Reliable long-term performance, optimal cell viability, and successful experiments. Precise CO2 concentration and temperature control with easy operation and maintenance. - Patented DHA direct-heating and air jacket system*: highly-precise temperature control provides outstanding uniformity and rapid temperature recovery after door openings. - Fast CO2 recovery: The PID controller and dual infra-red sensors ensure ultra-fast CO2 recovery without overheating, even after multiple door openings. - Unique solid-state O2 zirconia sensor in multigas incubators enables precise regulation of physiological oxygen concentrations, simulating in-vivo conditions. Description as per manufacturer documentation. You are welcome to arrange a viewing. We are happy to organize economical shipping for you! You will receive an official invoice. For international customers, net invoices can be issued (valid VAT ID required). Subject to prior sale. Visit our shop to view our other offers as well. All listed company names and trademarks are property of their owners and are used only to identify and describe the products. Technical specifications may vary and errors in item description are subject to change.

Būklė: naudotas, Gamybos metai: 1992, Sheet width: 2050 mm Sheet thickness: 10.0 mm (steel) Bending capacity: 8.0 mm (steel) Top roll diameter: approx. 205 mm Side roll diameter: approx. 195 mm Control: conventional Oil capacity: 80.0 liters Voltage: 380 V Total power requirement: 5.5 kW Iodexacdvopfx Agfjtd Weight: 3200 kg Dimensions (L x W x H): 4500 x 1500 x 1300 mm Equipment: - Robust electro-hydraulic 3-roll plate bending machine - 3-roll design enables a wide variety of bending and rolling operations - Swiveling control unit at the front * Operation and control of all rolls or machine axes * Digital position indicator * Manual operation using joysticks - Bending diameters of up to 1.1 times the top roll diameter possible - Forged and hardened rolls with a hardness of 53–55 HRC - Low-maintenance, stable machine concept - Rigid steel welded construction - Electro-hydraulic drop-end for easy pipe removal - Pressure gauges for the rolls - Safety device (safety cord with switch unit) - Operating manual (PDF)

Būklė: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: XMRMC000050000638, ašių konfigūracija: 3 ašys, pirmoji registracija: 12/2005, bendras ilgis: 131 300 mm, bendras plotis: 2 500 mm, bendras aukštis: 940 mm, pakaba: oras, padang padangų: 50 procentas, spalva: kitas, Gamybos metai: 2005,

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2005, mašinos/transporto priemonės numeris: MC0 35100, valdymo tipas: CNC valdymas, automatizacijos lygis: pusiau automatinis, pavaros tipas: hidraulinis, volelio skersmuo: 1 000 mm, maks. lakšto storis: 130 mm, plieno lakšto storis (maks.): 130 mm, bendras ilgis: 3 500 mm, galia: 240 kW (326,31 AG), Techninės detalės Viršutinis cilindras 1 mm Maks. lenkimo plotis: 3 500 mm Itodpfeyn Agbex Agfed Maks. lakšto storis: 200 mm Bendra galia: 160 kW Mažiausias ritinėjimo skersmuo: 770 mm Maksimalus cilindrų spaudimas: 2 x 2 t Viršutinis volas Ø1 000 mm Apatiniai volai Ø900 mm

Būklė: naudotas, ašių konfigūracija: 3 ašys, pirmoji registracija: 09/2010, krovimo vietos ilgis: 9 030 mm, krovinių skyriaus plotis: 2 540 mm, krovos erdvės aukštis: 820 mm, bendras ilgis: 13 850 mm, bendras plotis: 2 540 mm, pakaba: oras, padangos dydis: 205/65R17.5, ratų bazė: 8 630 mm, spalva: raudona, Gamybos metai: 2010, Įranga: ABS,

Gamybos metai: 2022, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, !!! Kalibruota, sandėlyje turime dvi vienetus. Kaina nurodyta už vieną vienetą !!! Tūris: 161 l Dezinfekavimo režimas: Pasirinktinai Deguonies kontrolė: 1 - 18 %, 22 - 80 % Itjdexbilispfx Agfsd Prieigos angos skersmuo: 30 Duomenų kaupiklis: Taip CO2 jutiklio tipas: Infraraudonųjų spindulių Kamera: Nerūdijantis plienas su vario priedu Vidinių stiklinių durų: 4 Drėgmės perspėjimo bei stebėjimo paketas: Ne Minimali temperatūra: 26 Maksimali temperatūra: 50 Jutiklinio ekrano valdiklis: Taip Aktyvus drėkinimas: Ne

Gamybos metai: 2021, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, !!! Calibrato, abbiamo tre unità disponibili in magazzino. Il prezzo si intende per una sola unità !!! Dimensioni esterne (L x P x A): 620 x 730 x 905 mm Dimensioni interne (L x P x A): 490 x 523 x 665 mm Volume: 165 litri Peso netto: 80 kg Campo e oscillazione della temperatura controllata: AT +5 ~ +50, ±0,1 °C Uniformità della temperatura: ±0,25 °C Campo e oscillazione controllo CO₂: 0 ~ 20, ±0,15 % Campo e oscillazione controllo O₂: - Livello e oscillazione dell'umidità: 95, ±5 %UR Sensore di temperatura: Termistore Metodo di sterilizzazione: Decontaminazione H₂O₂ (opzionale) Sensore CO₂: Doppio IR Sensore O₂: - Display: Touch screen LCD Materiale esterno: Acciaio verniciato (parte posteriore non verniciata) Materiale interno: Lega di acciaio inox arricchita in rame Materiale isolante: Polistirene estruso Metodo di riscaldamento: Riscaldamento diretto & sistema con mantello d'aria Porte esterne: 1 Serratura porta esterna: Opzionale Porta reversibile sul campo: Inclusa Porte interne: 1 ermetica – in vetro temperato Ripiani: 4 x lega di acciaio inox arricchita in rame Dimensioni ripiano (L x P x A): 470 x 450 x 12 mm Carico massimo per ripiano: 7 kg Itsdpfsxbilpox Agfod Capacità massima ripiani: 10 Passaparete: 1 Posizione passaparete: Posteriore alto sinistra Diametro passaparete: 30 mm Arresto alimentazione elettrica: R Allarme extra range temperatura: V-B-R Allarme alta temperatura: V-B-R Allarme extra range CO₂: V-B-R Allarme extra range O₂: - Porta aperta: V-B Alimentazione: 230 V Frequenza: 50 Hz Livello rumorosità: 29 dB

Būklė: geras (naudotas), Technical Data: Working length: 3050 mm Max. bending capacity: 30.0 mm Pre-bending: 25.0 mm Number of driven rolls: 3 Top roll diameter: 410 mm Bottom roll diameter: 380 mm Hydraulic drop-end bearing Extended rolls for profile bending Control panel with digital display Motor power: 40 kW Dimensions (L x W x H): approx. 6900 x 2000 x 2450 mm Ijdpfowchplsx Agfjtd Weight: approx. 22 tonnes Accessories: Lateral hydraulic bending supports

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 1 200 h, Funkcionalumas: visiškai funkcionalus, Oversize return conveyor: 500 x 9,000 mm (W x L) Secondary screen area: 1,350 x 4,000 mm (W x L) Discharge height fine material conveyor approx.: 3,440 mm Crusher discharge conveyor / discharge height: 800 x 9,100 mm (W x L) / 3,300 mm Crusher drive / power: direct / 185 kW Feed conveyor: 1,000 x 6,400 mm Itsdeup Tibopfx Agfjd Hopper volume: 6.6 m³ Feed capacity up to approx.: 270 t/h Max. feed size: 200 mm Feed height: 2,600 mm Crusher discharge conveyor: standard Crusher discharge conveyor: with swiveling oversize return conveyor Power unit: SCANIA (Stage 5) standard Machine control: SPECTIVE (standard)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, PHCBI CO2 Incubator MCO-230AICUV. Protective inner glass door. 4 height-adjustable perforated shelves. 1 drip tray. Iodpfxewutx Nj Agfjtd Lockable. Interior: stainless steel. Fitted with castors. Display with touch panel. Unused. Including functional warranty.

Gamybos metai: 2023, būklė: labai geros būklės (naudotas), Profesionali pneumatinė įranga SEMCO 600 ml kasečių ir talpų ištuštinimui, skirta pramoniniam naudojimui (klijams, sandarinimo masėms, pastoms ir aukštos klampos medžiagoms). Gamintojo informacija: • Gamintojas: axiss GmbH (Vokietija) • Tipas: 9110 / B-SEMCO600-PN-KM-F • Gamybos metai: 2023 • Serijos numeris: 514 • Kokybės standartas: DIN EN ISO 9001:2015 • CE ženklinimas Techninis aprašymas: • Pneumatinis SEMCO 600 ml kasečių ištuštinimas • Tvirta konstrukcija ant aliuminio profilio montavimo plokštės • Stūmoklio mazgas su permatoma cilindro rankove (padėties kontrolė) • Slėgio reguliatorius su manometru • Krypties valdymo vožtuvas • Greitos jungtys pneumatinėms sistemoms Ijdpfx Agoyc Nzusfotd • Atjungimo vožtuvas (saugumui) • Galimybė montuoti vertikaliai arba horizontaliai • Sklandus ir valdomas darbas

Būklė: geras (naudotas), Emco Compact 10 tekinimo staklės Itedoyl Rz Uopfx Agfsd Pagaminta Austrijoje. Staklės puikios būklės, beveik nenaudotos. Atkelia iš spaustuvės techninės priežiūros dirbtuvių. Nenaudotos gamyboje. Komplekte yra priedai.

Būklė: visiškai atnaujintas (naudotas), Besaum papildomo pjovimo mašina MEM Cobra Pjovimo aukštis 120 mm Prašviesos plotis 1070 mm 4 ašys – kintamos Ijdpfx Asu Ni Iuegfotd 2 x 55 kW Pilnai atnaujinta mašina. Papildomai galime pasiūlyti naują atskyriklį, kaip parodyta nuotraukoje. Pardavimas pagal kliento užsakymą.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, X ašies eiga: 450 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 350 mm, veleno greitis (maks.): 2 500 aps./min, plunksnos brūkšnys: 100 mm, Parduodama Emco frezavimo staklė FB-4 tipo. Staklės anksčiau buvo naudojamos tik tarpįmoninėje mokymo programoje. Šiuo metu sandėlyje yra dar dvi identiškos Emco FB-4 staklės. Itsdpfx Agjyvra Iofjd Frezuojanti staklė V/H Gamintojas: Emco Tipas: FB-4 Gamybos metai: 2005 Valdymas: Heidenhain ND-760 indikatorius Techniniai parametrai: ----- • Eigos X-Y-Z: 450 x 300 x 350 mm • Tvirtinimo paviršius: 800 x 400 mm • Įrankio tvirtinimas: SK-40 • Įrankių įtempimas: hidraulinis • Pinolės eiga: 100 mm • Frezų galvutė pasukama ±90° • Velenas: 50 – 2.500 aps/min • Greičio pasirinkimas: 18 žingsnių • Elektrinis centrinis tepimas • Staklių apšvietimas • Aušinimo įranga • Pusiau uždara apsauginė kabina (atlenkiama) • Svoris: 1.550 kg • Išmatavimai IxPxA mm: 1.485 x 1.500 x 1.700 mm Priedai: ----- • 4x staklių kojelės • Eksploatacijos instrukcija • Priešinga atrama horizontaliniam apdirbimui • Velenas horizontaliniam apdirbimui • Stalo gaubtas (šiuo metu nuimtas) • 10x SK-40 įrankių tvirtinimai