Statybos Svetainę Langelį pirkti naudotą (1 808)

Gamybos metai: 2021, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Nedo kanalų statybos lazeris TUBUS 2 — pagaminimo metai: 2021 Naudotas, iš Kurt König Baumaschinen GmbH (Einbeck) profesionalios nuomos parko. Būklė ir informacija: - Būklė: naudotas iš nuomos, reguliariai prižiūrėtas - Funkcija: visiškai veikiantis - Produktų nuotraukos bus papildytos — susisiekite dėl naujausių nuotraukų - Apžiūra galima 37574 Einbeck pagal susitarimą Kaina 1 950 EUR + PVM | EXW Einbeck | Pristatymas pagal pageidavimą Nodpfx Acsy A E Uxopola

Būklė: labai geros būklės (naudotas), Used Steel Hall 36.5 x 13.5m, eave height from finished floor approx. 9.8m, gable roof with 3° pitch, top edge of runway rail for bridge cranes at approx. 8.5m above finished floor. The existing hall was originally equipped with two 10-ton cranes. Steel structure includes roof and wall girders, crane runway, but is offered without wall panels, windows, doors, or braces—as seen on inspection. Base plates must be newly constructed by the buyer. Price: €102,000 ex-works, loaded, from location 56759 Kaisersesch. Additionally offered: 2 units Demag single-girder overhead cranes, 10t x 12,000mm, lifting height approx. 7.5m above finished floor, lifting speeds 4/0.8m/min, trolley travel speeds 20/5m/min, crane travel speeds 40/10m/min. The cranes will be delivered in top condition after workshop inspection and equipped with brand new HBC Micron 5 radio controls each, with mutual optical cut-off. Pre-limit switches installed at the end of crane and trolley travel paths. Price: €24,000 per crane, ex-works, loaded, from location 56759 Kaisersesch. New power supply line for assembly by buyer along crane runway, 36m, 4-pole, 15sqmm, set including main crane switch, €4,000. Drawings and static calculations are not available and must be prepared by the buyer. Nodpfx Acepqx I Hjpela Package price for the complete offer, ex-works, loaded: €130,000 negotiable.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, tuščias svoris: 8 000 kg, didžiausias leistinas svoris: 39 000 kg, bendras svoris: 47 000 kg, ašių konfigūracija: 3 ašys, leistina ašies apkrova (ašis 1): 13 000 kg, leistina ašies apkrova (ašis 2): 13 000 kg, leistina ašies apkrova (ašis 3): 13 000 kg, pirmoji registracija: 07/1983, krovimo vietos ilgis: 11 870 mm, krovinių skyriaus plotis: 2 500 mm, pakaba: parabolinė lingė (spyruoklė), spalva: balta, Gamybos metai: 1983,

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, tuščias svoris: 11 200 kg, didžiausias leistinas svoris: 25 600 kg, bendras svoris: 36 800 kg, ašių konfigūracija: 2 ašys, pirmoji registracija: 09/2007, krovimo vietos ilgis: 13 650 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 500 mm, bendras ilgis: 13 700 mm, bendras plotis: 2 550 mm, pakaba: oras, padangos dydis: 245.70 R 17.5, spalva: šviesiai pilka, priekabos stabdys: priekaba su stabdžiais, Gamybos metai: 2007, Įranga: ABS,

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, spalva: balta, krovimo vietos ilgis: 6 000 mm, krovinių skyriaus plotis: 6 000 mm, krovos erdvės aukštis: 2 000 mm, NEW EQUIPMENT Our various sizes: Width x Length → 6m x 6m → from €1,299 → 8m x 6m → from €2,099 → 12m x 8m → from €3,699 → 10m x 12m → from €4,599 → 12m x 12m → from €10,745 plus delivery ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT OFFERINGS ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ ASSEMBLY AVAILABLE ️ → Genuine 750 g/m² PVC tarpaulin – more durable than standard products ️ → Extra strong and tear-resistant due to fabric reinforcement ️ → UV resistant ️ → 100% waterproof ️ → Extra robust, galvanized pipes for maximum stability ️ → Usable all year round ️ → German customer service and support during purchase and assembly ️ → Snow load: 130 kg/m² (arch spacing 1m) and 70 kg/m² (arch spacing 2m) ️ → Wind load: wind zone 4 (arch spacing 1m) and wind zone 2 (arch spacing 2m) ️ → Includes ground stakes, concrete anchors, and all other small parts ️ → Spare parts guaranteed ️ → 5-year warranty on correctly installed PVC tarpaulin ️ → 10-year warranty against rust-through on the steel frame Njdpeudwgfjfx Acpjla ► Most models available for immediate delivery ► Colours: green or white ► Includes German structural analysis ► Doors on both gable ends ☏ Call us! We will gladly provide a non-binding quote with a best price guarantee. THE IDEAL ALTERNATIVE TO PERMANENT STRUCTURES Optimal protection against wind, sun, rain, hail, and snow! Usually permit-free (unlike wooden, steel, or sheet metal halls) No foundation required High stability and structural safety (tested by a German engineering office) Decades of use: high quality, warranty, and spare parts availability Robust, corrosion-free framework Various forms, colours, and sizes VERSATILE APPLICATIONS → ️In agriculture, forestry, industry, commercial, and private sectors → Storage space for goods, materials, or machinery → Garage / carport for trucks, motorhomes, or boats/yachts → Workshop in the lightweight hall → Canopy on construction sites → Shelter or stable for livestock → Barn for straw, hay, and wood → Greenhouse for plants ! Prices include structural analysis ! Delivery and assembly possible *Images similar · Prices & colours may vary · Subject to price changes · For an exact price, please request a non-binding quote · Available while stocks last · Offer non-binding

Būklė: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Log cabin construction machine for blockhouse production Year of manufacture: 1985 Manufacturer: Norway / Finland Max. workpiece height: 200 mm Max. workpiece width: 250 mm 1. End groove milling unit Max. cutter diameter: 220 mm Max. cutter width: 60 mm Motor: 2.2 kW, 2900 rpm Pneumatic feed 2. Drilling unit Max. clamping diameter: 16 mm Max. drill bit diameter: 16 mm Motor: 1.1 kW, 1450 rpm 3. Horizontal milling unit Cutter diameter: 210–240 mm Cutter width: 40–100 mm 2 motors, each 2.2 kW, 2900 rpm Vertical milling unit Cutter diameter: 210–240 mm Cutter width: 40–120 mm 2 motors, each 2.2 kW, 2900 rpm Nodpfx Asv Dxn Ascpsla Hydraulic feed, hydraulic power unit with 3.0 kW with 2 x 4 pneumatic workpiece clamps Pneumatic pressure: 7–10 bar Air consumption: 8 Nm³/h Operating voltage: 380 V, 50 Hz Dimensions: Machine width: 2700 mm Machine depth: 1830 mm Machine height: 2180 mm + Hydraulic unit (L x W x H): 0.8 m x 0.36 m x 0.8 m Weight: 1,500 kg

Būklė: naudotas, Gamybos metai: 2001, Koppelbox nach Navigator – Couple Box after Navigator, MBO Couple Box, Baujahr 2001, Serien-Nr. XX174 Couple Box nach Navigator zur Verbindung mit MBO Aggregaten Online-Video-Inspektion via Skype-Video möglich Wir freuen uns über Ihren Besuch – Weitere Maschinen auf Lager Sofort verfügbar – Besichtigung möglich Lagerort Emskirchen / Nürnberg – Testläufe möglich Nodpfx Aceh Ax Umspjla

Būklė: naujas, Gamybos metai: 2026, Tilting Table Combination for Timber Frame Construction - BS20 The Randek tilting table combination is an efficient tool for the production of prefabricated walls, roofs, floors, and gable elements using timber or metal frames. The tables can be operated as stand-alone units or integrated into production lines. Precisely right-angled building components of high quality are achieved thanks to the clamping function. Raising and tilting of the components is performed via a controlled, manually supervised process. The tilting table combination has been developed for the manufacture of prefabricated houses, ensuring high productivity. Nljdpfxe Nn Hyj Acpsa The adjustable element height ranges from 2.25 m to 3.10 m. The following table lengths are available: 6.0 m / 7.5 m / 9.0 m / 12.0 m. Wall thickness can vary between 80 and 250 mm. Functions: The tilting table combination has been designed to efficiently carry out the following operations: frame assembly, insertion of insulation material, stapling of plastic or paper membranes, and application and nailing of wall claddings. • Production of right-angled components: the pneumatic clamping mechanism along the long side of the master table presses the frame structure into a right-angled, high-quality, highly accurate component • Automatic tilting of the component (manual control) • Automatic raising of the component Technical Description: • Length options: 6.0 m / 7.5 m / 9.0 m / 12.0 m • Width adjustment between 2250 – 3100 mm; manual adjustment is straightforward • The master table is hydraulically tiltable up to 92°, the receiver table up to 86° • Pneumatically actuated pressing function on the longitudinal side of the master table • 160 mm high stops • Both tables are faced with plywood panels where technically feasible; the plywood facing enables direct placement of sub-components and beams • The tabletops are supported by a robust steel frame • Optimum working height of 620 mm • Longitudinal C-profiles for positioning stops for studs • Tables are delivered ready for assembly; the assembly process is straightforward Safety: • Emergency stop switch on the control panel • CE conformity Advantages: • Precisely right-angled components thanks to the pressing function • Controlled automatic raising and tilting of components • Ideal working height • Flexible width adjustment

Gamybos metai: 2015, būklė: paruoštas naudoti (naudotas), A wide range of semi-automatic and automatic window manufacturing machines is available. 1) Selecta BSS, year of manufacture: 1994, machine dimensions (X/Y/Z): approx. 800mm/500mm/1200mm, weight: approx. 50kg. 2) Urban pneumatic press, year of manufacture: 2011, operating pressure: 0.8 MPa, air consumption: 4 l/stroke, stroke: 20mm, machine dimensions (X/Y/Z): approx. 850mm/850mm/1200mm, weight: approx. 130kg. 3) Hoffmann PU2-VH pneumatic slot milling machine, year of manufacture: 2002, machine dimensions (X/Y/Z): approx. 800mm/1200mm/1400mm, weight: approx. 200kg. 5) Selecta FC 106, year of manufacture: 1994, machine dimensions (X/Y/Z): approx. 1000mm/800mm/1550mm, weight: approx. 50kg. 6) Batimet FOM wood and aluminum press, year of manufacture: 2004, machine dimensions (X/Y/Z): approx. 1000mm/1100mm/1500mm, weight: approx. 60kg. 7) MLA M7 GLF 100, year of manufacture: 2015, power: 1.1kW, operating pressure: 7 bar, machine dimensions (X/Y/Z): approx. 750mm/850mm/1200mm, weight: approx. 50kg. 8) Machine dimensions (X/Y/Z): approx. 400mm/400mm/1250mm, weight: approx. 50kg. 9) Hoffmann MS-35 wood and aluminum mitre saw, year of manufacture: 2003, power: 2 x 18kW, machine dimensions (X/Y/Z): approx. 1200mm/800mm/1500mm, weight: approx. 200kg. On-site inspection possible. Individual sale possible. Nodpfxjucw Tij Acpjla

Būklė: naujas, Mobilus sandėlis Individualus pasiūlymas Nledpfexzrtpjx Acpsa

Būklė: geras (naudotas), Kanalų statybos atrama, kanalų atrama, atraminė sija, statybos atrama, tvirtinimo sija - Kiekis: yra 8 atramos - Kaina: už vienetą - Kanalų statybos atrama: tranšėjų tvirtinimui - Ilgis: 1,40-1,65 m - Vamzdžio skersmuo: Ø 42 mm Nlodpfect Aarjx Acpja - Atraminė plokštė: 70 x 70 mm - Svoris: 6 kg/vnt.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, tuščias svoris: 8 800 kg, didžiausias leistinas svoris: 28 000 kg, bendras svoris: 36 800 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 11/2002, krovimo vietos ilgis: 13 650 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 750 mm, bendras ilgis: 13 700 mm, bendras plotis: 2 550 mm, pakaba: oras, padangos dydis: 205.65 r 17.5, klirensas: 750 mm, spalva: šviesiai mėlyna, priekabos stabdys: priekaba su stabdžiais, Gamybos metai: 2002, Įranga: ABS, galinis keltuvas,

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Įranga: galinis keltuvas,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Statybos vadovo biuras, sudarytas iš 2 konteinerių ant platformos, apie 30 kv. m Nsdpfx Acjyia E Uopela

Būklė: geras (naudotas), Gamybos metai: 2012, Eksploatavimo salė nuomai Gamybos ir montavimo salė paruošta naudojimui Viskas vietoje - 850 m² - Yra kompresorių sistema - 40,0 t salės kranas (2 x 20 t apverčiamas kranas) - 10,0 t salės kranas - 5,0 t portalo kranas - 20,0 t salės kranas - 12,5 t salės kranas - Tuschier spaudimo presas Millutensil MIL303 - Kraninių kablių aukštis 7 m - Įvažiavimo aukštis sunkvežimiams vartai 4,5 x 5 metrų - Dirbtuvių vežimėlis su įrankiais ir kėlimo priemonėmis - Meistro ir susitikimų biurai su oro kondicionieriumi - Moterų ir vyrų tualetai - Yra tekinimo ir šlifavimo staklės - Yra šviesolaidžio jungtis (galima sutartis su Telekom) Nuoma galima iš karto Nodpfx Aceygkinopsla Vieta: 35232 Dautphetal, Industriestr. 9 Apžiūros galima tik susitarus.

Gamybos metai: 2020, veikimo valandos: 30 h, būklė: naujas, Semi-automatic filler for hot or cold filling of fruit or vegetable juices or other liquids into bag-in-box pouches with Vitop or Postmix closure systems. Consists of: - Feed tank with level monitoring - Pneumatically actuated filling valve - Stainless steel design with 4 casters - Filling volumes from 3–20 L pouch capacity - Filling performance for 10 L pouches approx. 2,000 L/h - Filling performance for 5 L pouches approx. 1,200 L/h Njdpfxo Uwrqs Acpola The filling process is monitored by an integrated flow meter and controlled by a pneumatic valve. Bag pre-evacuation Optional nitrogen overlay possible after filling Optional configuration as a 4- or 6-head inline filler

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, tuščias svoris: 8 400 kg, didžiausias leistinas svoris: 30 600 kg, bendras svoris: 39 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 06/2007, krovimo vietos ilgis: 13 500 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 850 mm, bendras ilgis: 13 500 mm, bendras plotis: 2 550 mm, pakaba: oras, padangos dydis: 245.70 R 17.5, klirensas: 850 mm, spalva: šviesiai mėlyna, priekabos stabdys: priekaba su stabdžiais, Gamybos metai: 2007, Įranga: ABS,

Gamybos metai: 2011, būklė: labai geros būklės (naudotas), This is a complete plant for house construction. Prices for each item are listed individually. Comprising the following elements (see attached document): Images will follow and are already included in the attached document. Table 1 (Positioning and clamping the stud frame) €34,500 • Adjustable longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Table 2 (Placing and fastening the first sheathing layer) €25,300 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Nlodpfou D Amgox Acpsa Table 3 (Placing the second sheathing layer, fastening, and flipping the element onto the next table) €35,650 • Longitudinal conveyor with 3 hinged belt conveyors and sheathing • Pneumatic cross-clamping • Connections for compressed air and electricity • Hydraulic turning device Table 4 (Installation of electrical systems and insulation) €34,500 • Cross transfer with rollers and sheathing • Table cross-travel function • Connections for compressed air and electricity • Hydraulic turning device Table 5 (Placing the first sheathing layer and fastening the second side) €32,775 • Longitudinal conveyor with 3 hinged belt conveyors • Cross transfer with rollers • Pneumatic cross-clamping • Connections for compressed air and electricity Intermediate conveyor, 3 m length (parking bay for multifunction bridge) €4,600 • Longitudinal conveyor with 3 hinged belt conveyors Table 6 (Placing and fastening the second sheathing layer) €28,750 • Longitudinal conveyor with 3 hinged belt conveyors • Pneumatic cross-clamping • Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 • Longitudinal conveyor with 3 hinged belt conveyors • Hydraulic tilting unit • Table cross-travel unit • Overhead guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 (placing the first sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 (placing the second sheathing layer) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 (placing the first sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 (placing the second sheathing layer on the second side) €13,800 • Load capacity 85 kg with Schmalz vacuum unit • Steel base frame with low-friction rails • Travel range 12 x 5 m Wall storage 1: 12 m long, 24 bays €11,500 Wall storage 2: 12 m long, 20 bays Vacuum lifter with column-mounted slewing crane €9,200 1 traverse, 2 t Abus €20,125 1 traverse, 2 t

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 000 mm, bendras ilgis: 3 690 mm, bendras aukštis: 8 350 mm, Parduodama: tvirta pramoninė plieno platforminė laiptinė su keturiais aukštais, tinkama naudoti gamybinėse salėse, fabrikuose ir techninėse įrenginiuose. Konstrukcija sudaryta iš kelių aikštelių su stacionariais laiptais ir pagaminta iš plieno, aplink platformas įrengti (geltoni) apsauginiai turėklai. Laiptai suprojektuoti intensyviam pramoniniam naudojimui ir užtikrina saugų priėjimą prie aukštesnių įrengimų ar mašinų. Konstrukcija yra pastatoma, stabili ir tinkama tvirtam montavimui ant betono grindų. Specifikacijos: Tipas: Pramoniniai platforminiai laiptai / darbo platforma Medžiaga: Plienas Aukštų skaičius: 4 Bendras aukštis: apie 8,35 m Nlodpjyf Un Ssfx Acpoa Aikštelių aukščiai: 1-as aukštas: apie 1,81 m 2-as aukštas: apie 3,60 m 3-as aukštas: apie 5,40 m 4-as aukštas: apie 7,22 m Plotis: 200 cm Ilgis: 396 cm Laiptų ilgis (nuolydis): apie 3,96 m Vykdymas: stacionarūs laiptai su tarpinėmis aikštelėmis Saugos priemonės: turėklai aplink platformas

Būklė: naudotas, Complete brewery plant consisting of: - Grist mill (ROBIX) with plate scale - 2-vessel brewhouse with a cast wort capacity of 10 hl. One vessel as a mash/wort kettle with bottom heating and internal boiler. One vessel as a lauter tun/whirlpool. Manufactured by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Manufactured by Joh. Albrecht Brautechnik. - 5 cylindrical-conical storage tanks, each with a volume of 27 hl. Manufactured by Joh. Albrecht Brautechnik. - Various beer hoses - Membrane pumps (FLOJET) used as booster pumps, driven by compressed air - Beer pump (SAWA) with a capacity of 5 m³/h - Cleaning lance for serving tanks - CO2 warning device (Beviclean) - Additional accessories such as pressure regulators, dispensing heads, etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment system (PENTAIR) - Refrigeration system with compressor, buffer vessel, expansion tank, refrigerant pump - Complete piping Machine (additional): 10 hl brewhouse with storage tanks and utility systems, year of manufacture 2018-2022 Cast wort capacity: 1,000 l Material: Stainless steel brewhouse Njdpfxoxwyzas Acpjla Equipment: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindrical-conical storage tanks, booster pump, beer pump, CO2 warning device, cleaning lance, pressure regulators, dispensing heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment system, piping.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, Gamybos linija / stalas sienų ir stogo plokštėms / elementams. Nuo įsigijimo mažai naudota, atrodo ir veikia kaip nauja. Yra 1 vnt. Randek BS10u su 80 laipsnių pakreipimu ir 2 vnt. BS05 stalai. Pneumatinis tvirtintuvas / spaustuvas ir pneumatiniai ritinėliai, palengvinantys sienos judėjimą. Ilgis: po 9 m. Sienos dydis: nuo 225x900 cm iki 365x900 cm. Pirkimo kaina 2022 m.: 850 000 SEK ≈ 80 000 EUR. Kaina nurodyta be PVM. Nsdoxq Rrcopfx Acpsla

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, New and unused Adjustable hydraulic pump Njdpfxjw H Ad Ee Acpjla Manufacturer: Herrenknecht Type: AL A4VS0 250 LR2DY / 30R-V2B250U34 Pressure: 270 bar Power: 132 kW

Gamybos metai: 2019, būklė: naujas, CANUSA CPS MIS-65 / MIS 100 Schwarzrohrgröße: 1220 mm - 48 Zoll Manschettenbreite: 650 mm - 26 Zoll MIS - 65 1120 - 650 CW BK/T SP Nodpfxjih R Icj Acpola 127030 - 12200650026-040 Baujahr: 2019, NEU Preis pro Karton! Ca. 200 Verpackungseinheiten (Karton) verfügbar.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, spalva: raudona,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, tuščias svoris: 9 800 kg, didžiausias leistinas svoris: 30 200 kg, bendras svoris: 40 000 kg, ašių konfigūracija: 3 ašys, pirmoji registracija: 07/2022, kita apžiūra (TÜV): 02/2026, krovimo vietos ilgis: 13 800 mm, krovinių skyriaus plotis: 2 550 mm, krovos erdvės aukštis: 870 mm, bendras ilgis: 13 700 mm, pakaba: oras, padangos dydis: 245.70 R 17.5, spalva: raudona, priekabos stabdys: priekaba su stabdžiais, Gamybos metai: 2022, Įranga: ABS, galinis keltuvas,