Maža Dalis Lentyna pirkti naudotą (15 378)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing Gsdpfjmhh Dhex Ac Doir - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support Gedjmhh Dzspfx Ac Doir - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. Gjdpfxjmhh Ane Ac Doir The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Gedpfx Acjguk A Hj Doir Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Godpfeguk Dksx Ac Deir We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard Giedpfemhhy Njx Ac Dor - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) Gijdpfx Acjmhh Dte Djr - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. Giedsguk Dvjpfx Ac Dor When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: geras (naudotas), Ultragarsinis jutiklis, ultragarsinis generatorius, ultragarsinė vibracinė dalis, ultragarsinis keitiklis, ultragarsinis plastiko suvirinimo įrenginys, ultragarsinis keitiklis, ultragarsinė sonotroda. - Gamintojas: Herrmann, ultragarsinis suvirinimo keitiklis ir ultragarsinė vibracinė dalis - Suvirinimo keitiklis: Tipas KHS20-IP50-L - Horn/ultragarsinė sonotroda: Tipas 4 004 .433 žr. nuotraukas - Kiekis: yra 1 vnt. ultragarsinė vibracinė dalis - Matmenys: 450/270/A145 mm - Svoris: 20,1 kg Gsdeyxm R Topfx Ac Dsir

Būklė: geras (naudotas), Ultragarsinis jutiklis, Ultrasonic Sensor, ultragarsinis generatorius, Ultrasonic generator, ultragarsinė svyravimo sistema, ultragarsinis keitiklis, ultragarsinio plastiko suvirinimo įrenginys, ultragarsinis konverteris, ultragarsinė sonotrodė -Ultragarsinio suvirinimo keitiklis: ultragarsinė svyravimo sistema -Suvirinimo keitiklis/ragas: tipas R2003474 -Ultragarsinė sonotrodė: -Kiekis: 1x ultragarsinė svyravimo sistema prieinama Gsdpfxoyxm Rto Ac Doir -Matmenys: 515/160/H115 mm -Svoris: 18,9 kg

Būklė: geras (naudotas), Ultragarsinis jutiklis, ultragarsinis generatorius, ultragarsinė vibracinė dalis, ultragarsinis keitiklis – ultragarsinis plastiko suvirinimo aparatas, ultragarsinis konverteris, ultragarsinė sonotrodė - Gamintojas: Dukane, ultragarso suvirinimo keitiklis, ultragarsinė vibracinė dalis - Suvirinimo keitiklis: Tipas 41B30 92420 353324 - Guolis (Horn): Tipas 2.0 - Ultragarsinė sonotrodė: - Kiekis: 1x ultragarsinė vibracinė dalis prieinama Gedpfx Acjyxm Rae Djir - Matmenys: 450/110/H120 mm - Svoris: 6,1 kg

Būklė: geras (naudotas), Ultragarsinis jutiklis, Ultragarsinis sensorius, Ultragarsinis generatorius, Ultragarsio generatorius, Ultragarsinė svyravimo dalis, Ultragarsinis keitiklis, Ultragarsinis plastiko suvirinimo įrenginys, Ultragarsinis keitiklis, Ultragarsinė sonotrodė -Gamintojas: Dukane, Ultragarsinio suvirinimo keitiklis Ultragarsinė svyravimo dalis -Suvirinimo keitiklis: Tipas 41B30 92420 353324 -Ragas: Tipas CTC205708 Gsdpsyxm Ixofx Ac Doir -Ultragarsinė sonotrodė: -Kiekis: 1x ultragarsinė svyravimo dalis prieinama -Matmenys: 450/110/H83 mm -Svoris: 4,6 kg

Būklė: geras (naudotas), Ultragarsinis jutiklis, ultragarsinis generatorius, ultragarsinė svyruoklė, ultragarsinis keitiklis, ultragarsinis plastiko suvirinimo įrenginys, ultragarsinis konverteris, ultragarsinė sonotroda. - Gamintojas: Herrmann, ultragarsinis suvirinimo keitiklis, ultragarsinė svyruoklė - Suvirinimo keitiklis: Tipas KHS20-IP50-L - Ragas/Ultragarsinė sonotroda: Tipas 400, žiūrėti nuotraukas - Kiekis: 3x ultragarsinės svyruoklės - Kaina: už vienetą - Matmenys: 450/100/H145 mm - Svoris: 15,7 kg Godpfx Aceyxm Hne Doir

Būklė: geras (naudotas), Ultragarsinis jutiklis, Ultragarsinis generatorius, Ultragarsinių bangų vienetas, Ultragarsinis keitiklis – Ultragarsinis plastiko suvirinimo įrenginys, Ultragarsinis konverteris, Ultragarsinė sonotroda, Ultragarsinis konverteris -Gamintojas: Herrmann, ultragarso suvirinimo keitiklis, ultragarsinių bangų vienetas -Suvirinimo keitiklis: tipas KHS20-IP50-L -Ragas/ultragarsinė sonotroda: tipas 400, žiūrėkite nuotraukas -Kiekis: turime 3 ultragarsinių bangų vienetus -Kaina: už vienetą Gjdpfx Acjxyw H Ee Djir -Matmenys: 450/100/H70 mm -Svoris: 4,8 kg/vnt.

Būklė: geras (naudotas), 345 NAUDOTAS automatinis tešlos dalytuvas-apvalintuvas Fortuna. IŠORINIAI MATMENYS (cm): - aukštis: 170, - plotis: 95, - ilgis: 205. Giodpfx Aeyuvnlsc Dor Įrenginys paruoštas apžiūrai mūsų sandėlyje (36-068 Bachórz, Lenkija). Galimos mokamos parinktys: transportas. Nurodyta kaina yra be PVM. Kalbame angliškai, vokiškai, prancūziškai, rusiškai ir ukrainietiškai.

Būklė: geras (naudotas), Volelių konvejeris, transportavimo linija, volelių transporterio juosta, volelių takas - Gamintojas: Soco System, nevaldomas volelių konvejeris, 2 dalių, 2,0/2,0 m, reguliuojamas aukštis - Tako plotis: 600 mm Gisdpfxeyw H Hrs Ac Dor - Voleliai: Ø 48x15 mm - Kaina/pristatymas: pilnas komplektas - Matmenys: 2000/820/H720 mm / 2000/670/H650 mm - Svoris: 150 kg

Būklė: geras (naudotas), Rėmai: 8860x1050x80 mm – 34 vnt. 3000x1050 mm – 7 vnt. Sijos: 1860x75x45 mm (2800 kg/lentynai) – 352 vnt. 2760x115x40 mm (2400 kg/lentynai) – 26 vnt. 2700x100x50 mm (2400 kg/lentynai) – 22 vnt. Galima įsigyti ir dalinius kiekius. Jei jums reikia lentynų ar priedų kitokių komplektacijų ar variantų, susisiekite su mumis. Siūlome platų naujų ir naudotų lentynų bei priedų asortimentą ir mielai padėsime Jūsų planavime. Individualus, Jūsų poreikiams pritaikytas pasiūlymas mums yra savaime suprantamas dalykas. Siuntimas: Prašome teirautis dėl siuntimo kainos, nurodydami savo pašto kodą, miestą bei pageidaujamą prekių kiekį. Giodpjd Hbqnefx Ac Dor

Būklė: geras (naudotas), Kiekvienos lentynos stiklo padėtis: 65 mm Maksimalus stiklo aukštis: 1680 mm Gjdpfxjyx Uf Sj Ac Dsir Plotis: 1500 mm Gylis: 2600 mm Aukštis: 2060 mm Būklė: Geras, naudotas

Būklė: naudotas, Matmenys (I x P x A): 170 x 65 x 160 cm Kaina: pagal užklausimą - Ypatumai:   - Aprašymas: Volelių plotis 1050 mm - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Įtampa [V]: 220 - Srovės suvartojimas [A]: 1,5 - Transportavimo matmenys: 1700 mm x 650 mm x 1600 mm (i x p x a) Finansinė informacija Gjdsyymxyepfx Ac Dsir PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimas: PVM atskaitomas verslininkams Pristatymas ir įrenginių keitimas galimas bet kuriuo metu visai pramonės sričiai Yorick Diebels

Būklė: naudotas, Kaina: pagal užklausą - Ypatumai: - Aprašymas: Komplekte yra apie 260 obliavimo galvų, 5 pjovimo agregatai, 70 frezavimo galvų (Spinner) ir visi peiliai lentynose prie sienos. - Dokumentacija prieinama: Ne - CE sertifikatas: Ne Finansinė informacija PVM: Nurodyta kaina be PVM PVM/diferencijuotas apmokestinimas: PVM atskaitomas įmonėms Gjdpfx Ajytcvaoc Doir Pristatymas ir įrenginių keitimas visada galimas visiems pramonės sektoriaus įrenginiams. Yorick Diebels

Būklė: naudotas, Matmenys (I x P x A): 125 x 50 x 100 cm Kaina: Pagal užklausimą - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra Gedpeyymnuofx Ac Doir - Įtampa [V]: 24 - Srovės suvartojimas [A]: 5,5 - Transportavimo matmenys: 1250mm x 500mm x 1000mm (i x p x a) - Transporto pakuotės [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/skirtuminis apmokestinimas: PVM atskaitomas verslui Pristatymas ir atpirkimas galimi bet kada visiems pramonės įrenginiams Yorick Diebels

Gamybos metai: 2009, būklė: naudotas, Tuščias svoris: 150 kg Matmenys (I x P x A): 50 x 50 x 120 cm Kaina: pagal užklausą - Pagaminimo metai: 2009 - Dokumentacija: Nėra - CE sertifikatas: Nėra - Serijos numeris: 1248S - Transportavimo matmenys: 500 mm x 500 mm x 1200 mm (i x p x a) - Transportavimo svoris [kg]: 150 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/Skirtumo apmokestinimas: PVM atskaitomas įmonėms Pristatymas ir priėmimas mainais galimi bet kuriuo metu visoms pramoninėms prekėms Giedeyymzhspfx Ac Dor Yorick Diebels

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Marel 2730 lašišų filetavimo mašina su nugaros bei pilvo apipjaustymu Marel MS 2730 – tai automatizuota lašišų filetavimo mašina, sukurta didžiausiam išeigai ir našumui užtikrinti, galinti apdoroti iki 25 žuvų per minutę. Mašinoje integruotas automatinis dydžio reguliavimas per jutiklinį ekraną, pažangi nugaros ir pilvo apipjaustymo sistema, ji suprojektuota lengvam valdymui ir higienai palaikyti. Mašina skirta apdoroti lašišas, sveriančias nuo 1,5 iki 8 kg (papildomas komplektas – mažesnėms žuvims), ir priklauso „Marel“ plataus žuvų perdirbimo sprendimų asortimento daliai. Pagrindinės savybės ir galimybės Automatinis apdorojimas: MS 2730 automatiškai prisitaiko prie įvairių žuvų dydžių, naudoja elektroniniu būdu valdomus įrankius, užtikrinančius aukštą kokybę ir nuoseklius rezultatus. Didelis našumas: per minutę gali filetoti iki 25 lašišų, padidinant perdirbimo efektyvumą. Giodpfx Ajy Aul Tec Dsr Pagerintas išeigos rodiklis: konstrukcijoje naudojami apvalūs peiliai, kurie pašalina mėsą arti stuburo, reikšmingai padidindami filė išeigą. Patogus valdymas: daugiakalbis spalvotas jutiklinis ekranas suteikia lengvą ir saugų visų operacijų valdymą, galimi iš anksto užprogramuoti režimai skirtingiems žuvų dydžiams. Kompaktiškas dizainas: mašina pasižymi kompaktiškais matmenimis, todėl lengvai integruojama į esamas perdirbimo linijas. Techninės specifikacijos Žuvies dydis: standartas 1,5–8 kg, yra komplektas žuvims nuo 500 g. Vandens sunaudojimas: apie 15 litrų per minutę. Energijos tiekimas: veikia su 3 x 400 V, reikalinga 3,3 kW galia. Privalumai perdirbėjams Efektyvumas: optimizuotas gamybos procesas su automatiniu reguliavimu ir dideliu greičiu. Kokybė ir išeiga: gaunami aukštos kokybės filė su mažesnėmis atliekų sąnaudomis. Lankstumas: gali apdoroti įvairaus dydžio žuvis, suderinama su integruotais sprendimais platesnėms perdirbimo operacijoms. Ekonomiškumas: optimizuotas vandens sunaudojimas mažina eksploatacines išlaidas. Žuvis į tiektuvą dedama pilvu žemyn, todėl padavimas vyksta daug lengviau ir greičiau. Papildomas apvalių peilių komplektas perpjauna žuvį nuo angos iki uodegos. Tai padidina išeigą, nes apdirbama mėsa prie pat stuburo. Pilvinio kaulo apipjaustymui naudojamos 4 spaudiklių sistemos, kurios maksimaliai fiksuoja žuvį ir leidžia optimaliai pjauti tiek prieš, tiek po rigorizės filė. Rezultatas – aukštos kokybės filė su didesne išeiga ir produktyvumu. MS 2730 automatiškai prisitaiko prie skirtingų dydžių žuvų, todėl programa įjungus papildomai reguliuoti nebereikia. Mašina gali filetoti iki 25 žuvų per minutę – priklausomai nuo žuvies ilgio. Integruota žuvies profilio ir dydžio matavimo sistema leidžia elektroniniu būdu valdomiems peiliams automatiškai koreguoti filetavimo programą pagal žuvies dydį ir formą. Taip pasiekiamos didesnis našumas, geresnė kokybė ir didesnė išeiga, priklausomai nuo apipjaustymo reikalavimų. Su papildomu komplektu mažoms žuvims MS 2730 gali filetoti žuvis nuo 500 g iki 4 kg. Gamintojas: Marel Modelis: MS 2730 Metai: 2018 Našumas: 25 žuvys per minutę Žuvies dydis: 1,5-8 kg. Energijos tiekimas: 400/230V / 50 Hz Galia: 5,5 kW Vandens sunaudojimas: 15 l/min. Matmenys (IxPxA): 3.150 x 1.035 x 1.980 mm Svoris: 1.000 kg.

Būklė: geras (naudotas), 2 pieces gate stands. Oscillating shaft and cantilever shaft. Gjdswwr Eajpfx Ac Dsir 2 pieces lower split gate rollers. Shafts and bearings for rollers. Guide bracket, etc.

Būklė: labai geros būklės (naudotas), Spare parts for Gatter LSH 65, some as new, new and used. Flywheels, posts, hydraulic cylinders, chain drives, feed gearboxes, guides, solenoid valves, overhang components. Upper and lower saw frames, saw blade hangers with insertion brackets. Pulleys. Spare parts also available for Esterer Gatter SS 71. Gisdpfei T Egpjx Ac Der