Liepsnos Purškimo Pistoleto pirkti naudotą (1 178)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Arburg 1200T 800-150 / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2005 Injection Unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2500 bar Dosage volume: 54 cc Clamping Unit: Clamping force: 80 t Tie bar spacing: 0x0 mm Platen size: 1200 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Nlsdpfxjxqyfle Adusi Additional Equipment: Air valve x 6 Hydraulic core pull x 6 Hot runner control system Injection unit hardened – bimetallic Rotary table diameter: 1200 mm Kistler sensor – mould pressure monitoring Machine has been serviced by authorised Arburg service in Germany Dimensions: Weight: 7400 kg Length/Width/Height: 3.92x1.61x3.78 m Drive: Pump/motor: 22 kW Heating capacity: 9.4 kW Total connected load: 31.4 kW All machines offered are started and tested by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Ferromatik Milacron K110D-S/2F / 2K Injection Molding Machine Year of manufacture: 1998 Injection unit: Screw diameter: 30 mm Shot weight: approx. 85 g Injection pressure: 2298 bar Metering volume: 99 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Platen size: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface 4x hydraulic core puller Control system with hot runner zones Injection unit is wear-resistant and corrosion-resistant Screw diameter in vertical injection unit: ⌀25 mm – approx. 43 g/PS The machine has been regularly serviced Recently, the service center replaced the machine's cylinder with screw and the hydraulic valves with new components Dimensions: Weight: 6300 kg Nedpfxexqyf Se Adueli Length/Width/Height: 5.00x1.60x3.60 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to attend technical live tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Battenfeld HM 300/2250S with Wittmann W818 Robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of manufacture: 2007 Injection Unit: Screw diameter: 55 mm Shot weight: 702.5 g Injection pressure: 2500 bar Dosage volume: 772 ccm Clamping Unit: Clamping force: 300 t Tie bar spacing: 710x630 mm Platen size: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Nodpfxoxqyg Ae Aduoli Control system: UNILOG B6 - touch control panel Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Hot runner control x 8 Injection unit is wear-resistant and corrosion-proof Proportional valve on the injection unit – precise injection The machine is equipped with a new original screw and barrel Wittmann W818 Robot 4-axis high-speed robot: 3 axes driven by servo motors (electric); A and C movement Touch control panel Robot with adapter, safety enclosure Dimensions: Weight: 13,000 kg Length/Width/Height: 6.90x1.90x2.40 m Drive: Pump/motor: 45 kW Heating power: 22.7 kW Total power: 67.7 kW All offered machines are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, Haitian MA1600IIS with Hilectro V-800IS Robot / Hybrid Machine Year of manufacture: 2020 Injection unit: Screw diameter: 45 mm Shot weight: 291 g Injection pressure: 1780 bar Dosage volume: 320 ccm Clamping unit: Clamping force: 160 t Tie bar distance: 470x470 mm Platen size: 700x700 mm Ejector: hydraulic Clamping system: toggle Control system: Keba - touchscreen Additional equipment: Machine in excellent technical condition Hybrid machine: high-speed, energy-efficient, and very quiet Euromap 67 Robot interface 3x air valve 3x hydraulic core pull Main drive motor - servo motor with inverter - energy saving Njdpoxqypwofx Aduoli Central lubrication Screw diameter can be changed Hilectro V-800IS robot Year of manufacture: 2020 5-axis robot: 4 axes driven by servo motors (electric): X, Y, Z, B (rotation) Touch control panel Robot with adapter Purchase of the robot available at extra cost Dimensions: Weight: 5650 kg Length/Width/Height: 5.42x1.90x2.19 m All machines offered are tested by our service technicians prior to sale. A video of the technical tests specific to the selected machine can be provided, or you are welcome to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 Injection Unit: Screw diameter: 35 mm Shot weight: 117 g Injection pressure: 2500 bar Dosage volume: 139 cc Clamping Unit: Clamping force: 130 t Tie bar spacing: 470x470 mm Platen size: 650x650 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runner zones x 6 Hardened injection unit – bimetallic Proportional valve on the injection unit – precise injection Njdpfx Adexqyq Isujli Integrated system for quality pressure monitoring (Sensor Kistler brand) – measurement of mould cavity pressure Type of injection unit: Vario – allows, for example, side injection A new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/Width/Height: 4.45x1.49x2.17 m Drive: Pump/motor: 22 kW Heating power: 10.2 kW Total connected load: 32.2 kW All machines offered are started up and inspected by our service technicians prior to sale. It is possible to obtain a video of the technical tests of a selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Arburg 420C 1300-675 with Star sprue picker Year of manufacture: 2002 Injection unit: Screw diameter: 50 mm Shot weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: Clamping force: 130 t Tie bar spacing: 420x420 mm Platen size: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario – This allows, for example, the use of the injection unit for side injection Covers on the operator side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pump/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All machines offered are started and tested by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our facility in Łódź. Nljdpfxsxqytie Aduji Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Arburg 470C 1500-675 Year of manufacture: 2004 Injection unit: Screw diameter: 60 mm Shot weight: 427 g Injection pressure: 1440 bar Dosage volume: 508 cc Clamping unit: Clamping force: 150 t Tie-bar spacing: 470x470 mm Platen size: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Nsdpfxsxqytvj Adusli Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Core pull control Injection unit hardened – bimetallic Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pump/Motor: 30 kW Heating capacity: 14.9 kW Total connected load: 44.9 kW All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2009, Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cc Clamping unit: Clamping force: 150 t Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: Core pull control Hardened injection unit - bimetallic Screw diameter can be changed Dimensions: Weight: 4,790 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Nedjxqyumspfx Adusli Drive: Pump/Motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All machines offered are started up by our service engineers prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Arburg 320C 500-250 Year of manufacture: 11/2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosage volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened - bimetallic Dimensions: Weight: 2330 kg Nlsdpfx Adsxqx Ulsusi Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are commissioned by our service technicians prior to sale. It is possible to obtain a video of the technical inspections of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Arburg 320C 500-100 / Excellent Technical Condition Year of Manufacture: 10.2004 Injection Unit: Screw diameter: 25 mm Shot weight: 45 g Injection pressure: 2000 bar Dosage volume: 49 cc Clamping Unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional Equipment: The machine is in excellent technical condition and was used for testing injection molds Operating hours: 25,739 h in automatic mode Total operating hours: 30,661 h Hydraulic core pull x 1 Reinforced injection units – bimetal Proportional valve on injection unit – precise injection Built-in pressure quality monitoring system by Kistler – mold pressure measurement It is possible to change the screw diameter to smaller or larger: 20 mm or 30 mm Dimensions: Weight: 2,300 kg Length/Width/Height: 3.18x1.47x1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 4.9 kW Total connected load: 19.9 kW Nljdpfoxqx Ursx Aduei All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 320C 500-170 Year of manufacture: 2011 Injection Unit: Screw diameter: 35 mm Shot weight: 105 g Injection pressure: 1,470 bar Dosage volume: 115 cc Clamping Unit: Clamping force: 50 t Tie bar distance: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – touchscreen Additional Equipment: Operating hours: approx. 35,000 h in automatic mode Controller with air valve Core pull control Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Original Demag tool crane: chain, electrically controlled, 2 lifting speeds Dimensions: Weight: 2,310 kg Length/Width/Height: 3.41x1.47x1.99 m Drive: Pump/motor: 11 kW Heating capacity: 9.4 kW Total installed power: 20.4 kW All machines offered are started up by our service technicians prior to sale. Nlsdpfoxqx Uxox Adusi It is possible to receive a video of the technical tests for the selected machine or to participate in live technical demonstrations at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Arburg 320C 600-250 / Machine in very good technical condition Year of manufacture: 2001 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dosage volume: 144 ccm Clamping unit: Clamping force: 60 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition The machine has produced injection-molded parts for the medical industry – clean production conditions Core pull control Hardened injection unit – bimetallic Built-in sorting flap Dimensions: Weight: 2,330 kg Length/Width/Height: 3.65x1.48x1.99 m Drive: Pump/Motor: 15 kW Heating capacity: 6.5 kW Nedpfx Aexqyapoduoli Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, Arburg 420C 800-250 Year of manufacture: 1999 Nljdpfoxqydzex Aduoi Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1820 bar Dose volume: 144 ccm Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced molded parts for the medical industry – clean production conditions Euromap 12 Robot interface Core pull control Injection unit hardened – bimetallic Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pump/Motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Arburg 420S 800-350 Year of manufacture: 11.2003 Nljdpfx Adexqyd Ueuji Injection Unit: Screw diameter: 50 mm Shot weight: 250 g Injection pressure: approx. 1300 bar Dosage volume: 288 ccm Clamping Unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional Equipment: Euromap 12 interface Robot interface Air valve x 1 Core pull control Injection unit hardened – bimetallic Proportional valve on the injection unit – precise injection Integrated original side sprue picker Arburg Dimensions: Weight: 3,800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pump/motor: 18.5 kW Heating power: 10.2 kW Total power: 28.7 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Battenfeld EcoPower SE 300/1330 / Electric Injection Molding Machine Year of manufacture: 2012 Injection Unit: Screw diameter: 50 mm Shot weight: 491.4 g Injection pressure: 2470 bar Plasticizing volume: 540 cc Clamping Unit: Clamping force: 300 t Tie bar spacing: 770x720 mm Platen size: 1090x1170 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B6 - Touchscreen Additional Features: Electric machine: high-speed, energy-efficient, and very quiet Nodpfx Asxqygvsdujli Machine is in very good technical condition Euromap 67 Robot interface Air valve x 8 Control system for hot runner x6 Hardened injection unit – bimetallic Parallel movements It is possible to change the screw diameter to 45, 55, or 65 mm Dimensions: Weight: 14,100 kg Length/Width/Height: 7.20x2.04x2.20 m Drive: Pump/Motor: 0 kW Heating capacity: 22 kW Total connected load: 0 kW All machines offered are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine is available upon request, or you can participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Wittmann Battenfeld EcoPower 110/350 / Electric Machine / Production Line with Wittmann W818 Robot Year of Manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Dosage volume: 169 ccm Clamping Unit: Clamping force: 110 t Tie bar distance: 470x420 mm Platen size: 680x660 mm Ejector: hydraulic Clamping unit: electric Control System: UNILOG B6 - Touchscreen Additional Equipment: Electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Central lubrication Nlodpfexqyiqjx Aduoi Automatic mold height adjustment The machine has been serviced in Germany Wittmann W818 Robot Year of manufacture: 2012 4-axis robot: 3 axes driven by servo motors (electric); A and C movement Axis travel: X-420, Y-800, Z-1500 Touch control panel Robot equipped with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Dimensions: Weight: 4300 kg Length/Width/Height: 4.91x1.42x2.10 m All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: naudotas, Gamybos metai: 2015, Engel Victory 200H/60W/180 Combi / Production Line with Engel Viper 20 Robot Year of Manufacture: 2015 Injection Unit: Screw diameter: 22 mm Shot weight: approx. 54 g Injection pressure: 2,392 bar Dosage volume: 61 ccm Clamping Unit: Clamping force: 180 t Tie bar spacing: 0x0 mm Platen size: 1020x980 mm Ejector: hydraulic Clamping system: toggle lever Control: CC 300 – Touchscreen Additional equipment: 2K machine with original Engel Viper 20 robot Tie-bar-less, hybrid machine: energy-efficient, high-speed, and very quiet Operating hours: approx. 20,000 h in automatic mode Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Control with 36 hot runner zones Reinforced injection units – bimetallic Second injection unit is angled, screw diameter fi 15 mm (18 cm³ / 2,203 bar) Main drives – 2 x servo motors controlled by inverter Proportional valves on injection units – precise injection Kistler sensor – mold pressure control Parallel movements Machine features additional servo motor for mold actuation Inputs/outputs for peripheral devices Engel Viper 20 Robot Year of manufacture: 2015 High-speed robot, 5 axes: X, Y, Z, A, C axes are servo-driven (electric) Robot is integrated with the machine and features an additional control panel Robot safety package Robot with adapter and protective enclosure Dimensions: Weight: 13,200 kg Length/width/height: 5.86x1.98x2.51 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine, or to participate in live technical tests at our facility in Łódź, Poland. Nlsdpfxexqympj Adusi Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Engel Victory 330H/80V/160 Combi Ecodrive / Production Line with Sepro SR S5-25 S3 Trans Robot / Operating Hours: approx. 18,000 h in automatic mode Year of manufacture: 2013 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 100 g Injection pressure: 2385 bar Dosage volume: 113 ccm Clamping Unit: Clamping force: 160 t Tie bar spacing: 0x0 mm Platen size: 750x750 mm Ejector: hydraulic Nedpfoxqymvsx Adusli Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Tie-bar-less machine, hybrid: energy-saving, high-speed, and very quiet Very good technical condition Operating hours: approx. 18,000 h in automatic mode Total operating hours: 24,312 h Euromap 67 Robot interface Air valves x 5 Hydraulic core pulls x 5 Control with hot runner circuits x 16 Reinforced injection units – bimetal Main drives - 2 x servo motors with inverter control Proportional valves on injection units - precise injection Screw diameter in vertical injection unit: ⌀22 mm - approx. 28 g/PS Option to purchase a rotary table Sepro SR S5-25 S3 Trans Robot Year of manufacture: 2013 3-axis robot: 3 axes electrically driven by servo motors: X, Y, Z (telescopic) Travel distances in axes approx.: X-2000, Y-1000, Z-1500 Automatic axis lubrication Touch control panel Safety package for robot Robot with adapter and safety enclosure Robot can be purchased at extra cost Dimensions: Weight: 8,700 kg Length/Width/Height: 5.35x1.76x3.42 m All machines offered are started and tested by our service technicians before sale. It is possible to receive a video of technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Haitian MA1600II/eco / Operating hours: 3,945 h Year of manufacture: 2018 Injection Unit: Screw diameter: 45 mm Shot weight: 291 g Injection pressure: 1690 bar Dosage volume: 320 ccm Clamping Unit: Clamping force: 160 t Tie bar spacing: 470x470 mm Platen size: 670x690 mm Ejector: hydraulic Nledpfoxqypqox Adusi Clamping system: toggle lever Control system: Haitian - Touchscreen Additional Equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-efficient, and very quiet Operating hours: 3,945 h Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 2 Injection unit hardened - bimetallic Main drive motor - servo motor driven by inverter - energy saving Central lubrication Dimensions: Weight: 5650 kg Length/Width/Height: 5.55x1.52x2.10 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to attend live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 470S 1100-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2000 bar Dosage volume: 201 ccm Clamping Unit: Clamping force: 110 t Tie bar spacing: 470x470 mm Platen size: 637x637 mm Ejector: hydraulic Clamping system: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 8 Injection unit hardened – bimetallic Proportional valve on injection unit – precise injection Conveyor belt integrated with machine control Built-in sorting flap Screw diameter can be changed Wittmann W711 Robot Year of manufacture: 2008 4-axis robot: 3 axes driven by servomotors (electric): X, Y, Z; C axis – pneumatic Axis travel: X-420, Y-1200, Z-2000 Touch control panel Robot with adapter Robot purchase at an additional cost Dimensions: Weight: 5,200 kg Length/Width/Height: 4.56x1.52x2.13 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Nledpfsxqyqnox Adusi Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 520S 1300-800 / Machine in very good technical condition Year of manufacture: 2008 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosage volume: 392 cc Clamping Unit: Clamping force: 130 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air valve x 2 Injection unit hardened - bimetallic The machine has been regularly serviced by authorized Arburg service in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Nlodoxqyrlepfx Aduoi Pump/Motor: 30 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Arburg 470C 1500-400 with Wittmann W711 Robot Year of manufacture: 2008 Injection unit: Screw diameter: 45 mm Shot weight: 232 g Injection pressure: 1580 bar Dosage volume: 254 cm³ Clamping unit: Nodpfx Adoxqytcsusli Clamping force: 150 t Tie bar distance: 470 x 470 mm Platen size: 650 x 650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface 1x air valve Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Wittmann W711 Robot Year of manufacture: 2007 4-axis robot: 3 axes with servo motors (electric); C axis Travel range of axes: X-420, Y-1200, Z-2000 Touch control panel Robot safety package Robot with adapter Purchase of the robot at an additional charge Dimensions: Weight: 4,900 kg Length/Width/Height: 4.44 x 1.63 x 2.09 m Drive: Pump/Motor: 18.5 kW Heating: 9.7 kW Total power: 28.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Arburg 1500T 3200-1300 e² / Hybrid Machine with Rotary Table Year of manufacture: 2011 Injection Unit: Screw diameter: 60 mm Shot weight: 607 g Injection pressure: 2000 bar Dosage volume: 664 ccm Clamping Unit: Clamping force: 320 t Tie bar spacing: 0x0 mm Platen size: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Hybrid machine: high-speed, energy-efficient, and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 3 Control system with hot runner x 13 Injection unit hardened - bimetallic Main motor - servo motor driven by inverter Nledpfexqywbjx Aduji Highly precise rotary table, servo motor-driven, controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to modify the injection unit for vertical operation Dimensions: Weight: 16,080 kg Length/Width/Height: 4.91x2.12x4.62 m All offered machines are started and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, Boy 90 M Year of manufacture: 2004 Injection Unit: Screw diameter: 42 mm Shot weight: 193 g Injection pressure: 1,724 bar Dosage volume: 214.7 ccm Clamping Unit: Clamping force: 90 t Tie bar distance: 430x360 mm Platen size: 635x610 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan - Touchscreen Nlsdpfx Adoxqx Dyouoi Additional equipment: Euromap 12 Robot interface Air valve x 1 Dimensions: Weight: 3,100 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pump/Motor: 15 kW Heating capacity: 11.3 kW Total power: 26.3 kW All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests for the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Arburg 320A 500-170 with Sprue Picker / Electric Machine Year of Manufacture: 2005 Injection Unit: Screw Diameter: 35 mm Shot Weight: 105 g Injection Pressure: 1,470 bar Dosage Volume: 115 cm³ Clamping Unit: Clamping Force: 50 t Tie Bar Distance: 320x320 mm Platen Size: 446x446 mm Ejector: electric Clamping System: toggle Control: SELOGICA Additional Equipment: Electric machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Hardened – bimetal injection unit Central lubrication Machine equipped with integrated Arburg conveyor belt and original sorting flap Dimensions: Nlsdpfx Adoxqx Tzouji Weight: 3,500 kg Length/Width/Height: 3.41x1.43x1.99 m Drive: Pump/Motor: 10.2 kW Heating capacity: 5.5 kW All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request