Lango Profilis pirkti naudotą (5 227)

Būklė: naudotas, Gamybos metai: 2013, Used machine Fodpfjytkiuex Abbjpd Year of manufacture: 2013 Equipment: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edging) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment - Direct glue application to the workpiece: leak-proof glue pot with bottom glue supply and fast heat-up time after machine downtime - Flush-cutting unit for front and rear workpiece edges, automatic sensing on the workpiece, pneumatic trimming with blade for cuttable edging - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, two high-power 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, two chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail, extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical details: - Min. workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Min. workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm without film tray (Ø 800 mm) - Net weight: approx. 260 kg Availability: short notice Location: Flörsheim

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €15,900 Leasing rate: €305.28 Shaft diameter: 50 - 60 mm Upper roller diameter: 180 mm Roller diameter: 180 mm Lower roller diameter: 180 mm Fsdeyn R E Sepfx Abbjpd Driven rollers: 3 Motor power: 3.75 kW Speed: 6 m/min Flat bar upright (cross-section / min. diameter): 60x10 mm / 500 mm; 20x5 mm Flat bar flat (cross-section / min. diameter): 80x20 mm / 500 mm; 50x5 mm Square steel (cross-section / min. diameter): 32x32 mm / 400 mm; 12x12 mm Round steel (cross-section / min. diameter): Ø35 mm / 350 mm; Ø10 mm Tube (cross-section / min. diameter): Ø60x2 mm / 600 mm; Ø15 mm Rectangular tube upright (cross-section / min. diameter): 50x25x3 mm / 450 mm; 20x1 mm Rectangular tube square (cross-section / min. diameter): 45x3 mm / 600 mm; 20x2 mm Angle iron outside flange (cross-section / min. diameter): 60x60x6 mm / 650 mm; 30x3 mm Angle iron inside flange (cross-section / min. diameter): 50x50x5 mm / 550 mm; 30x3 mm UPN outside flange (cross-section / min. diameter): UPN 80 / 600 mm, UPN 30 / UPN inside flange (cross-section / min. diameter): UPN 65 / 600 mm; UPN 30 / IPN horizontal (cross-section / min. diameter): IPN 80 / 600 mm Length: 1200 mm Width: 850 mm Height: 1200 mm Weight: 955 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of both lower rollers Hardened universal rollers Lateral guide rollers manually adjustable in 3 axes Can be used horizontally and vertically Digital display for the positions of the lower rollers Machine and equipment according to CE regulations Operating manual in GERMAN and ENGLISH

Būklė: naudotas, Gamybos metai: 2020, max. workpiece length 3740 mm Milling spindle 1 unit Fjdpfx Aeyq Sztsbbopd Main motor 15 kW CNC control system Felder Format4 Type Profit H500S 16.38 CNC Machining Center ----- - From a wooden window manufacturing plant. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, for full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm passage height (from console level), depends on clamping system, see layout. Travel paths: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW, HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional locking for the C-axis - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in X-direction, 5 spindles in Y-direction, grooving saw in X-direction) Horizontal drilling unit with 6 spindles, 4 spindles in X-direction, 2 spindles in Y-direction. 1 grooving saw in X-direction, max. diameter 120 mm - Disc tool changer with 24 tool positions mounted on the right machine column max. tool diameter 240 mm max. tool height 370 mm - Tool change station for circular saw blade mounted on the gantry/tool changer, max. saw blade diameter 350 mm - Tool changer on the left machine column with 10 tool positions max. tool diameter 180 mm max. tool length 230/300 mm Collet spacing 110 mm - Disc tool changer with 24 tool positions mounted on the gantry, moves in X direction max. tool diameter 240 mm max. tool height 370 mm - Moving pick-up station for chip deflector - 6 workpiece supports s-motion, CNC-position controlled - 2 processing zones for pendulum operation - Vacuum pump 90 m3/h - Chip conveyor - Line laser for round arch processing - Including all available solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety equipment - Software "WoodFLash" Lamello Clamex P Macro Ausklink Macro - "Greenline package" for reduced energy consumption ----- Price for the above-mentioned machine on request! ----- VIDEO NOTE: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical information according to manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT.

Būklė: naudotas, Combined Section Steel Shear and Punch GEKA Type HYD 80 / Hydracrop 80/A Machine No. 9566 Year of manufacture approx. 2000 Punching force: 80 tons Throat depth: 300 mm Punching up to Ø 40 mm in 14 mm sheet Flat bar shear: 450 x 15 mm Angle steel shear: 130 x 130 x 13 mm Square bar shear: 45 x 45 mm Round bar shear: Ø 45 mm Rectangular notcher: up to 12 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz - Stop with electric stroke release, 500 mm - Worktable with stop at punching station: 550 x 380 mm - Working height at punching station: 1100 mm - Worktable with stop at rectangular notcher: 550 x 400 mm - Working height at rectangular notcher: 930 mm - Approx. 21 assorted punching tools - Operating manual - Original paint, not repainted Space requirements (L x W x H): 1800 x 1150 x 1950 mm Weight: 1.7 tons Very good condition Fpjdpfxerz Tute Abbed

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €11,800 Leasing rate: €226.56 Shaft diameter: 60 mm Top roller diameter: 215 mm Fpsdpswiq S Nsfx Abbsd Bottom roller diameter: 215 mm Driven rollers: 3 Motor power: 1.5 kW Speed: 4 m/min Flat bar upright (cross-section / min. diameter): 80x20 mm / 1200 mm; 40x10 mm ... Flat bar flat (cross-section / min. diameter): 120x25 mm / 600 mm; 50x... Square bar (cross-section / min. diameter): 50x50 mm / 800 mm; 20x20 mm ... Round bar (cross-section / min. diameter): Ø 50 mm / 800 mm; Ø 20 mm ... Tube (cross-section / min. diameter): Ø 100x2 mm / 1600 mm; Ø 6 ... Rectangular tube upright (cross-section / min. diameter): 80x40x3 mm / 1400 mm; 40x... Rectangular tube square (cross-section / min. diameter): 70x3 mm / 1600 mm; 40x2 mm ... Angle iron leg outside (cross-section / min. diameter): 70x70x7 mm / 1000 mm; 40x... Angle iron leg inside (cross-section / min. diameter): 70x70x7 mm / 1200 mm; 40x... Length: 1000 mm Width: 1400 mm Height: 1650 mm Weight: 950 kg 3 driven rollers (brake motor) Hardened drive shafts Hydraulic adjustment of the upper roller Hardened universal rollers Side straightening rollers adjustable on one axis manually Can be used horizontally and vertically Foot pedal for forward and reverse operation Machine and equipment comply with CE regulations Operating manual available in GERMAN and ENGLISH

Būklė: naujas, In the attached PDF document, you will find the description of the items – prices available upon request! RUCHSER standard offer with layout for a timber window production line with milled glazing bead and screwed corner joints. Daily capacity: approx. 15 windows Production line consists of: Pos. 1.0 – Article 107850000 Fpjdpfxoytx Urs Abbod RU-PWD-H1600/130/4 Profile Trolley, double-sided Length 1600 mm, width 850 mm, height 2140 mm, for horizontal storage and transport of profile cuttings. 12 storage arms per column, securely welded to the column, 2 middle columns adjustable, clear spacing of storage arms 130 mm, storage arm depth per side 400 mm, arms lined with felt, fitted with 4 plastic swivel castors, 150 mm diameter, 2 of which with locking device. Pos. 2.0 – Article 0150001 RU-M Tilt & Turn Table Manually tiltable, support surface 1300 x 1400 mm, with 4 detachable extensions, each 1000 mm long, including tool tray, without drainage rebate recess. Pos. 2.1 – Article 5009-1 2 storage boxes with 2 compartments each (for RU-4; RU-2/4) Pos. 2.2 – Article 5062-1 Extension to the left and right 500 mm and upwards 7000 mm with foldable support feet on each side Pos. 2.2 – Article 5012-1 Swiveling extension tubes Length 700 mm (max. 3 pairs) Pos. 2.4 – Article 6125-2 Corner assembly device As right-angled pneumatic stops, retractable, with clamping unit for 2 profiles, mounted on RU-M Pos. 2.5 – Article 2069-1 Tilting device Instead of manual, pneumatically operated Pos. 3.0 – Article 10782000 RU-EW-2S Double-sided Storage Trolley Storage capacity max. 36 sash frames, L-shaped bolted, length 1200 mm, depth 800 mm, height 2200 mm, support rails lined with felt, 4 swivel castors, 2 with stopper Pos. 4.0 – Article 6600000 RU-KWI-1000 Order Picking Trolley Can be nested when empty, length 1120 mm, width 1100 mm, usable width 850 mm, height 1900 mm, support height 1500 mm, load capacity 750 kg, mobile on 4 plastic swivel castors (diameter 150 mm, 2 with locking device), 2 pull-outs left and right (each 350 mm long, max. 1800 mm), height max. 2100 mm Pos. 5.0 – Article 740-300 RU-DH-F2 Double Reel Trolley for 2 rolls For roll sizes up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with locking device Pos. 5.0a alternative to Pos. 5.0 – Article 744-200 RU-DH-F4 Double Reel Trolley for 4 rolls For roll sizes up to 620 x 350 mm (without spool), up to 800 x 350 mm (with spool), with 4 swivel castors, 2 with locking device Pos. 6.0 – Article 7360000 RU-BW-1200 Fitting Trolley With 16 compartments, length 1200 mm, width 700 mm, height 1100 mm, with 2 storage shelves, mobile on 4 plastic swivel castors, 125 mm diameter, 2 with stopper Pos. 7.0 – Article 10009200 RU-FMOG/K Sash Assembly Tilt & Turn Table ...

Būklė: naujas, Ruchser standard offer with layout for a wooden window production line with profiled glazing bead and screwed corner joints. Daily capacity approx. 30 windows Production line consists of: Pos. 1.0 – Article 107850000 1 piece RU-PWD-H1600/130/4 double-sided profile trolley, Length 1600 mm, width 850 mm, height 2140 mm For horizontal storage and transport of profile cuttings. 12 pairs of storage arms per post, rigidly welded to the posts, 2 center posts adjustable, clear spacing between storage arms 130 mm, storage arm depth per side 400 mm, arms covered with felt, equipped with 4 plastic swivel castors, diameter 150 mm, 2 of them with locking mechanism. Pos. 2.0 – Article 10776000 1 piece RU-MSTR assembly station for frame hardware fittings 3000 mm long, 600 mm wide 1 shelf for fittings, 1 support table with felt covering Working height adjustable between 900 – 1100 mm (Without screwing units) Pos. 2.1 – Article 6747 1 piece running rail with carriage 3000 mm long Pos. 2.2 – Article 6308 1 piece balancer for tools 3 to 5.5 kg Pos. 2.3 – Article 10778000 1 piece RU-STS-A inline screwdriver with automatic screw feed system POWASERT, consisting of inline screwdriver and feed unit ADS-MF4, complete with hose connections, inline screwdriver ADS 2445 RD with torque shut-off. Pre-set for the screw guide used by the customer. Suitable for the following screw sizes: Shaft diameter: 2.4 – 4.0 mm Shaft length: 10 – 35 mm Head diameter: 5 – 8 mm Information about the screw must be provided to the manufacturer at the factory when ordering. Pos. 3.0 – Article 10782000 1 piece RU-EW-2S double-sided storage trolley Maximum storage capacity 36 sash frames in L-shaped bolted design, length 1200 mm, depth 800 mm, height 2200 mm, support beams covered with felt, 4 swivel castors, 2 with lock Fpodpfsytx Ulox Abbsd Pos. 4.0 – Article 10766000 1 piece RU-DR-1 rotary table with driving mechanism for frame assembly. Table with locking brake. Support platform with crossbars and one extension to the left and right, both with felt covering. Basic dimensions 1400 x 1400 mm, extendable up to 2500 x 1400 mm, working height adjustable between 900 – 1100 mm Pos. 4.1 – Article 5360-01 1 fixed mounted tool tray 1000 x 400 mm for RU-DR-1 Pos. 4.2 – Article 6354 1 piece triple meter travel rail for drive unit, rail height 10 mm Pos. 4.3 – Article 6454 1 drive unit with flange rollers and locking brake Pos. 4.4 – Article 6788 1 corner screw fixture. 1 pair of pneumatically height-adjustable clamping units for fixing profiles at right angles. Pos. 5.0 – Article 10383000 1 piece RU-DK-T14/34 tilt-turn table with pneumatic tilting device. Working platform with 4 support beams, base size 1400 x 1500 mm, extended 3400 x 2300 mm. Support table covered with felt. Tilt table height adjustable between 900 – 950 mm. 2 folding and sliding support plates mounted. Tr...

Būklė: naujas, Automatinis pavieniam strypui: Taip/Ne Automatinis rėmui: Taip/Ne Fodpfjytx T Ujx Abbopd RUCHSER langų gamybos įranga Spaustuvų (klipsų) dėjimas medžio-aliuminio langams srautinėje linijoje ir ant varčios atraminio stalo. Žemiau pateikti vaizdo įrašai rodo: 1. Klipsavimo automatas sumontuotas ant varčios atraminio stalo 2. Klipsų dėjimas į suspaustą rėmą srautinėje linijoje 3. Klipsų dėjimas į pavienį gaminį srautinėje linijoje Lankstinuką su aprašymu rasite pridėtame PDF dokumente. Kainos – pagal užklausą! (Tech. duomenys pagal gamintojo informaciją – be garantijos!)

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Veleno skersmuo: 40 mm Lenkimo galimybės: Juostinis plienas vertikaliai prie 500 mm Ø: 60 x 10 mm Juostinis plienas horizontaliai prie 400 mm Ø: 100 x 15 mm Fjdpfx Ajx Anpvsbbepd Kvadratinis plienas prie 500 mm Ø: 35 mm Kampinis plienas atvira koja prie 450 mm Ø: 50 x 50 x 6 mm Kampinis plienas uždara koja prie 600 mm Ø: 50 x 50 x 6 mm T-profilis į išorę/vidų prie 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Apvalus plienas prie 500 mm Ø: 35 mm Veleno apsukos: 7,5 aps/min Elektrinis pajungimas: 380 V, apie 1,7 kW Užimamas plotas: 910 x 640 x 1400 mm Svoris: apie 480 kg

Būklė: naudotas, Aparatūros sandėlis taip_taip Striffler varčios aparatūros stalas ----- - su automatiniu suktuvu ir varžtų padavimu Fpsdoyn R Iyepfx Abbod - aparatūros lentyna - Roto aparatūrai skirtas presas (techniniai duomenys pagal gamintoją, be garantijos!)

Būklė: naudotas, Gamybos metai: 2006, Šliuzo velenas 2 vnt. Frezu agregatų skaičius: 5 vnt. Veleno skersmuo: 50 mm SCM Windor 40 R langų gamybos linija, pagaminta 2006 m. ----- Mašina yra visos langų gamybos įmonės pardavimo dalis, žiūrėti sandėlio numerį 1305-6979. Įrenginiai vis dar prijungti ir paruošti demonstracijai. Techninė santrauka: ----- - 2 ilgi CNC valdomi šliuzo velenai - Optima 16: gręžimo agregatai kaktinėms ir išilginei skylėms 't- ROTATEN: pasvirusių langų įtaisas - 3 ilgi CNC valdomi profilio velenai + agregatas iš viršaus ir apačios - Apvertimo vežimėlis mažiems varstomiems langams - Ruošinio grąžinimas Papildomi variantai už papildomą kainą: ----- - Naudoti Leitz langų ir durų įrankiai SCM Windor 40 R sistemai. Kaina 10 000 eurų - Atskira OKOMA UF 3 apvertimo mašina su pritaikytais įrankiais SCM Windor 40 R sistemai. Kaina 2 000 eurų Fodpfx Aoyn R Imobbjpd - Naudota drožlių nutraukimo ir filtravimo įranga SCM Windor 40 R (daugiau informacijos PDF faile). Kaina 5 500 eurų (Techniniai duomenys pagal gamintojo informaciją, be garantijos!)

Būklė: naudotas, Gamybos metai: 2018, max. workpiece length 4200 mm Milling spindle: 1 unit Main motor: 15 kW HOMAG CNC machining centre BMG310/42/F/K, year 2018 ----- Machine is part of the sale of a complete window manufacturing operation, see stock number 1305-6979. Machine still connected and ready for demonstration. Technical summary: ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Overhead laser Fpedpfoyn R Iajx Abbed - Working dimensions: 4200 mm length, 1350 mm width - 32-position rotary tool changer - 8-position linear tool changer - Fixed drilling head with 18 spindles (V12/H6/S0/90 degrees) - 8 consoles - 6 lift rails - Interface for PowerCLamp clamps (8 pcs.) - approx. 30 vacuum clamps - 4 x PowerCLamp clamps - WoodWop - Chip conveyor - Various small solid wood clamps, used for box-type windows For detailed description, see attached PDF document! ----- Price on request! Optional extras at additional cost: ----- - Used Leitz tooling set for Homag, suitable for arched window production fitting SCM Windor 40 R systems #1305-6993. Price: €12,000 - Barbaric vacuum lifter, year 2015. Price: €4,500 - Used Löwer Minizinkepresse MZP 1 for arched window production. Price: €1,000 (Technical data as provided by manufacturer, no liability for accuracy!)

Būklė: naujas, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Turkey Price: €10,800 Leasing rate: €207.36 Shaft diameter: 35 mm Top roller diameter: 137 mm Bottom roller diameter: 137 mm Driven rolls: 3 Motor power: 1.1 kW Speed: 7 m/min Flat bar upright (cross-section / min. diameter): 35x8 mm / 300 mm Flat bar flat (cross-section / min. diameter): 50x12 mm / 400 mm Square steel (cross-section / min. diameter): 18x18 mm / 250 mm Round steel (cross-section / min. diameter): Ø 22 mm / 200 mm Tube (cross-section / min. diameter): Ø 40x1.5 mm / 500 mm Rectangular tube upright (cross-section / min. diameter): 30x15x2.5 mm / 500 mm Rectangular tube square (cross-section / min. diameter): 25x25x2 mm / 450 mm Angle iron leg outwards (cross-section / min. diameter): 35x35x5 mm / 400 mm Angle iron leg inwards (cross-section / min. diameter): 30x30x4 mm / 550 mm Length: 1050 mm Width: 500 mm Height: 1250 mm Weight: 350 kg 3 driven rolls (with brake motor) Hardened and ground shafts Hydraulic adjustment of both lower rolls Usable horizontally and vertically Standard roller set Fpedpoynnhkefx Abbod Foot pedal for forward and reverse operation Two digital displays Control panel Machine and equipment in accordance with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: new Delivery time: approx. 10 weeks from order Country of origin: Turkey Price: €34,200 Leasing rate: €653.22 Shaft diameter: 100 mm Roller diameter: 315 mm Driven rollers: 3 Motor power: 7.5 kW Speed: 7 m/min Flat bar upright (section / min. diameter): 100x20 mm / 800 mm; 30x10 mm Flat bar flat (section / min. diameter): 200x30 mm / 1,200 mm; 160 mm Square steel (section / min. diameter): 60x60 mm / 750 mm; 15x15 mm Round steel (section / min. diameter): Ø 75 mm / 800 mm; Ø 15 mm Tube (section / min. diameter): Ø 125x2.5 mm / 1,400 mm Fsdpfx Aboynmrzebjpd Rectangular tube upright (section / min. diameter): 100x40x4 mm / 1,300 mm; 20x20 mm Rectangular tube square (section / min. diameter): 80x80x5 mm / 1,500 mm; 25x25 mm Angle iron, leg outside (section / min. diameter): 100x100x12 mm / 1,000 mm Angle iron, leg inside (section / min. diameter): 100x100x10 mm / 1,000 mm UPN, leg outside (section / min. diameter): UPN 180 / 900 mm; UPN 30 UPN, leg inside (section / min. diameter): UPN 180 / 1,000 mm; UPN 30 IPN flat (section / min. diameter): IPN 180 / 1,000 mm; IPN 80 Length: 1,465 mm Width: 2,000 mm Height: 1,700 mm Weight: 4,000 kg 3 hydraulically driven rollers Robust welded steel construction Hydraulic adjustment of the two lower rollers Digital display of the lower roller positions on a separate control panel Side straightening rolls adjustable in 3 axes Usable horizontally and vertically Forward and reverse drive Machine and equipment in accordance with CE regulations WE HAVE MORE THAN 210 REFERENCES!

Būklė: naujas, Condition: New Delivery time: approx. 12 weeks from order Country of Origin: Turkey Price: €51,900 Leasing rate: €980.91 Shaft diameter: 120 mm Roll diameter: 390 mm Driven rolls: 3 Fodpfx Abjynmrusbspd Motor power: 15 kW Speed: 2/7.5 m/min Flat bar on edge (cross-section / min. diameter): 125x25 mm / 1,200 mm; 30x... Flat bar flat (cross-section / min. diameter): 200x50 mm / 1,000 mm; 100... Square steel (cross-section / min. diameter): 65x65 mm / 750 mm; 20x20... Round steel (cross-section / min. diameter): Ø 80 mm / 850 mm; Ø 20 mm... Tube (cross-section / min. diameter): Ø 160x4 mm / 2,800 mm; Ø ... Rectangular tube vertical (cross-section / min. diameter): 120x40x4 mm / 1,800 mm; 3... Square tube (cross-section / min. diameter): 90x90x5 mm / 1,800 mm; 30... Angle steel – outside leg (cross-section / min. diameter): 120x120x12 mm / 1,200 mm; ... Angle steel – inside leg (cross-section / min. diameter): 100x100x10 mm / 1,200 mm; ... UPN – outside leg (cross-section / min. diameter): UPN 220 / 1,000 mm; UPN 1... UPN – inside leg (cross-section / min. diameter): UPN 220 / 1,200 mm; UPN 1... IPN horizontal (cross-section / min. diameter): IPN 220 / 1,000 mm; IPN 8... Length: 2,000 mm Width: 1,650 mm Height: 1,900 mm Weight: 4,450 kg 3 driven rolls (hydraulic motor and planetary gearbox) Shafts made of hardened and ground special steel Hydraulic adjustment of both lower rolls Hardened universal rolls Side guide rolls adjustable hydraulically in 3 axes 2 speeds Usable horizontal and vertical Mobile control panel Digital display (3 axes) Machine and equipment comply with CE regulations Operating manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES!

Būklė: geras (naudotas), Slotted cutters, window milling tool, indexable inserts, window construction tool - Slotted cutters, milling tool for: wooden windows - EXAKT - Bore: Ø 50 mm - 1x pallet of tools Fodpeb A Rg Sofx Abbspd - Various sizes - Weight incl. pallet: 346 kg

Būklė: naudotas, bendras ilgis: 3 700 mm, bendras plotis: 1 000 mm, bendras aukštis: 1 700 mm, bendras svoris: 800 kg, osciliacijos eiga: 30 mm, šlifavimo juostos ilgis: 1 500 mm, šlifavimo juostos plotis: 150 mm, galia: 6,5 kW (8,84 AG), sukimosi greitis (min.): 1 400 aps./min, sukimosi greitis (maks.): 2 800 aps./min, No. 04513 Profile Sanding Machine / Edge Processing Automatic Rehnen KBA Used Profile sanding machine / edge processing automatic for sanding edges, profiling, and sanding profiles in a through-feed process. The machine is additionally equipped with a corner copying router. Suitable for processing solid wood, chipboard, and MDF. Material thickness: 10 - 65 mm Fpodpfx Abjytd Tmjbsd Material length: min. 50 mm Material width: min. 60 mm Feed speed: 8 m/min Total power: 6.5 kW Equipment: - Oscillating edge sanding unit (sanding belt dimensions 150 x 1500 mm / 1400 and 2800 rpm / oscillation stroke 30 mm / contact roller and sanding pad) - Top milling unit - Bottom milling unit - Corner copying router / corner rounding unit - Bottom profile sanding unit - Top profile sanding unit - Feed chain conveyor with upper pressure Including technical documentation Including 6 used profile belts (require re-equipping) Transport dimensions approx. 3700 x 1000 x 1700 mm (L x W x H) Weight approx. 800 kg To avoid any misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical specifications, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. No warranty for used machines; sold as inspected. Payment Terms: Prices plus statutory VAT, payment before collection or shipping Delivery Terms: ex stock

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1997, Naudotas Sahilner profilių lenkimo staklės Tipas: PK 40 Veleno skersmuo: 40 mm Visos 3 varomosios ritinėliai Komplekte įvairūs įrankiai Fjdpfx Asytb Afsbbspd Pagaminimo metai: 1997.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, Sahindler - Scantool profilių lenkimo staklės Fpjdpfx Aeytb U Ujbbjd Modelis PV 60 NC Metai 2019 - Nauja / Demonstracinė Volelio skersmuo: 215 mm Plokščiojo plieno talpa: 120 x 25 mm Plokščiojo plieno ant krašto talpa: 80 x 20 mm Kampinio plieno talpa: 70 x 7 mm NC valdymas 1 komplektas profilių lenkimo volelių Hidraulinis viršutinio volelio judėjimas Lenkimo atrama Kojinis pedalas

Būklė: naudotas, Gamybos metai: 1998, Technical Data: Grinding area (incl. grinding wheel width 50 mm): 700 x 320 mm Grinding height: 400 mm Longitudinal stroke: 740 mm Cross traverse: 270 mm Table clamping surface: 1000 x 250 mm Distance table to spindle centre: 650 mm Table load capacity, max.: 400 kg Spindle drive, infinitely variable: 6 kW Grinding wheel dimensions, max.: ø300 x 60 x 127 mm Coolant system: 170 l Weight – total equipment: 4600 kg Equipment: - Fully electronic multi-axis control system, Brand NE (manufacturer: Schleier) - Brushless AC servo and spindle drives - Manual feed of NC-controlled axes via movable electronic handwheel, axis selection, rapid adjustment +/- and digital increment display integrated in the handwheel - Free-standing electrical cabinet incl. operating hours meter - Cooling unit - Automatic central lubrication - Enclosed work area - Oil drip trays Fsdoxvy Hgjpfx Abbjpd - CE marking Accessories: - 6 x grinding wheel flange incl. grinding wheels - 3 x grinding wheel flange - 1 puller device for grinding wheel flange - 1 balancing mandrel - 1 set of leveling plates and screws - Extraction unit - Raised vertical column for extraction unit

Gamybos metai: 2022, būklė: naudotas, Naudota mašina Langų siūlių frezavimo įrenginys Įranga ir techniniai duomenys: - Galia: 1900 W - Išeinanti galia: 1220 W - Tuščios eigos apsisukimų skaičius: 7800 aps./min - Maks. frezavimo disko skersmuo: 170 mm - Pjovimo gylis: 0–55 mm - Pjovimo aukštis/tarpų plotis nuo 4,7 mm - Pjovimo aukščio reguliavimas kas 2 mm - Min. atstumas iki apatinio atraminio paviršiaus: 2,5 mm - Pasukama 180° - Veleno sriegis: M 14 - Svoris: 4,5 kg - Garso slėgio lygis LpA: 99 dB(A) - Garso galios lygis LWA: 110 dB(A) Prieinamumas: greitai Fpsdpfjyq T I Ijx Abbjd Sandėlio vieta: 63934 Röllbach

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Parduodamos trys panašios konstrukcijos CMS profilių frezavimo staklės. Dvi iš jų buvo naudotos kaip atsarginių dalių donorės, taigi čia kalbama tik apie vieną veikiančią staklę su dviem atsarginių dalių donorais. Veleno galia: 7,5 kW, įrankio laikiklis: BT30, apsisukimai: 15 000 aps./min., apdirbimo matmenys X/Y/Z: 620 mm/1200 mm/193 mm, W/V: 2440 mm/629 mm, padavimas: 12 m/min, pozicionavimo tikslumas: 0,001 mm, valdymas: IBH/ATEC 6000HS, pagaminimo metai: 1992/1995/1996. Yra dokumentacija. Galima apžiūrėti vietoje. Fjdpfoytgnmox Abbopd

Būklė: naujas, Manual handheld device Yes Y/N Automatic for frames Yes Y/N RUCHSER window manufacturing machinery Fjdpfx Abjyrtymsbjpd Manual clip insertion for timber-aluminium windows with feed system. Pos. 1 RU-WAL-C, auxiliary trolley with cantilever arm Length: 4000 mm, swivel range: 120°, total height: 2900 mm, with storage bins, 1 drawer, counterweight: 50 kg and 2 support feet Trolley length: 850 mm, depth: 700 mm, mobile on 4 swivel castors, 2 of which with locking mechanism, 3 cable trolleys for hose package screwdriver. Pos. 2 Holding device for L7355 - ADS-MF 4 automatic screw feeding unit mounted on RU-WAL-C at approx. 1800 mm Pos. 3 RU-CS-ST-M, torque screwdriver ADS-2545A with screw feeding unit ADS-MF4 and aluminium holder box for receiving rotary or clip holders. The feed channel is adapted to the aluminium holder. The screwdriver is manually operated and features automatic torque shut-off as well as manual bit feed. The clip or rotary holder is stored in a container/box and is manually fed into position via a feed channel. Compressed air transports the holder into the correct screw position. Optionally, it is possible to screw clip or rotary holders of the same geometry. The box also serves as a top stop plate. Two positioning stops with indexing bolts allow depth adjustments. For more than 3 screw positions in depth, we recommend using a positioning stop set for both sashes and frames. The depth dimensions must be specified when ordering. Pos. 4 Balancer for equipment 3-5.5 kg Brochure with description can be found in the adjacent PDF document. Prices on request! (Technical specifications according to manufacturer – no liability assumed!)

Būklė: naudotas, Gamybos metai: 2004, Slotted spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm CNC control: Weinig PC-Nexus Weinig Uncontrol 12 With radial and axial NC spindles as well as VARIO table ..... The machine has been professionally dismantled and stored in 73447 Oberkochen. Technical Data Summary (Please enquire separately about any additionally included accessories) ..... Cross-cut saw ..... > Cross-cut saw, electronically/electrically, stepless horizontal adjustment > Number of tools: 1 pc. > Spindle speed: 3000–6000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.7 kW Fedpfxjyrtzke Abbjpd > Laser guide light for identifying cutting section > Axial traverse: 150 mm NC axis, stepless electronic adjustment > Radial traverse: pneumatic, 8 positions for e.g. top edge rounding Rounding unit ..... > Position: horizontal, bottom > Axial traverse combined with cross-cut saw Electronic length stop ..... > Length: 4500 mm 1st tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered 2nd tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial traverse: 580 mm NC axis, stepless > Spindle speed: 2,800–4,000 rpm > Tool diameter: 380–400 mm > Counter support: entire clamping length is countered Transfer conveyor ..... For transferring the components into the longitudinal machining area, including double workpiece separation before the entry to the longitudinal machining section. 1st profiling spindle (climb and conventional milling) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm 2nd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial traverse: 350 mm NC axis, stepless > Radial traverse: 80 mm NC axis, stepless > Spindle speed: 6000 rpm > Tool swing diameter min.: 140 mm > Tool swing diameter max.: 232 mm 3rd profiling/milling unit (grooving unit from above) ..... > Position: horizontal, top > Motor power: 3.0 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial traverse: 30 mm NC axis, stepless > Radial traverse: 125 mm NC axis, stepless > Spindle speed ...

Būklė: naudotas, Gamybos metai: 2011, max. workpiece length 6000 mm Milling spindles: 2 units Main motor: 18.5 kW Very well-maintained CNC machining center Homag Profi BMB 922/35/13/B with automatic loading and unloading Designed for machining wooden scantlings for windows, frame doors, or similar workpieces made of wood or wood-based materials. Detailed description available in the attached PDF! HIGHLIGHTS: Fodpfoymf Eqsx Abbspd - Workpiece length up to 6000 mm (with repositioning); workpiece width up to 300 mm for individual parts, door leaves up to 1,300 mm on auxiliary traverses, workpiece thickness up to 150 mm - Automatic loading and unloading of individual parts, buffer with 2 m depth - Automatic positioning of clamping vices, automatic re-clamping for interior/exterior profiling - 2 high-performance 4-axis spindles with HSK 63 F interface with C-axis - C-axis extension for Flex5+ aggregate - Fixed drilling head with 13 spindles (9 vertical, individually selectable, and 2 double-output horizontal drilling spindles, one in X-direction, one in Y-direction) - Disc tool changer with 18 positions - Chain tool changer with 72 positions - Auxiliary console table for machining special shapes and arches incl. various vacuum clamps and PowerClamp clamps for the auxiliary console table. With laser projection "Mr. Beam." - Vacuum pump - Chip conveyor - Includes exchangeable units (saw unit, lock case unit, dowel boring unit 3+1, drilling and milling unit with 4 spindles, FLEX 5 unit) - OPTION Window Tools: • Wooden Windows IV 67/77/89 – Year 2011 • Exterior Door IV 67/77/89 – Year 2011 • Lift-and-Slide IV67/77/89 – Year 2011 • Wood-Aluminium Windows 67/77 – Year 2018 • Wood-Aluminium Exterior Door 67/77 – Year 2018 Machine can be inspected in operation until approx. October 2026! Comprehensive technical description, window profiles and pricing available upon request! Current video available: Video sequences: Minute 0:00 - 2:08: complete machine view Minute 2:08 - 12:21: window production straight elements Minute 12:21 - 14:45: special window production on additional table (Technical data as per manufacturer – subject to verification!)