Lange Sukurti Įrankį pirkti naudotą (35 870)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Gbodjfdkb Tjpfx Ac Djk Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available at any time and system can be expanded - Larger quantities available: approx. 40 uprights in stock Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Professional telephone support - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance delivery notification. The material is packed in a way that allows easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level and dowel-able, and able to support the applied loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. Gbsdpfsmhh Dzox Ac Djk The rack uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least 500 mm of overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) Gbodpfx Acsmhhx Ie Dsk - (Spare parts re-orderable and expansion possible at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base sections, 1,000 mm useful depth - 12 cantilever arms, each with 1,000 mm useful depth, standard version - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts available and extensions possible at any time) - (*Larger quantities available: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms each with 1,000 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 boltable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total rack length: 4,000 mm - Fastening material included (without floor anchors) - Comes with assembly instructions and C4 load capacity labels according to DIN standards - Expert technical support by phone - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical manner to enable easy unloading. Gbsdpfx Acjmhhyaj Dek If installed outdoors, load capacities are reduced due to wind and snow loads. The installation surface must be concrete, level, suitable for anchoring, and able to withstand the imposed loads. The client is responsible for verifying and ensuring ground condition, load-bearing capacity, and any necessary official permits. Rack uprights must be anchored to the floor on-site; wall anchoring is neither required nor recommended. According to trade association guidelines, the uprights of the rack should have a minimum overhang of 500 mm above the highest storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. Gbjdpfeh Ek Dajx Ac Dsk According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Gbodpfx Acomhh Ans Dok Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing Gedjd Tqalepfx Ac Dobk - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized Gbedpfx Aofdkb Ujc Dsk - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. Gedpoguk A Hefx Ac Dsbk According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Gedpfxsfdkbho Ac Dobk Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Gbsdpfx Asguk Dkjc Dek - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) Gjdpomhhf Ssfx Ac Dobk - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Gbsdpfjmhhl Hox Ac Dsk Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments Gbsdpfxsmhhy Nj Ac Dsk - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever racking system in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 4,200 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth - Longitudinal and diagonal bracing for 1,300 mm bay distance (4,000 mm racking length) - Fastening material (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered, and extension is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Gbjdsmidyfepfx Ac Dok Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface painted in RAL 5010 (Enzian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Per upright: 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per arm: 730 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - Supplied with assembly instructions and load capacity labels C4 according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Local pickup available Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is well packaged for easy unloading. Delivery can take place approximately 1–2 weeks after receipt of order. When installed outdoors, the load capacities must be reduced to account for wind and snow loads. The subfloor must be made of concrete, level, suitable for doweling, and able to bear the applied loads. The floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional liability association guidelines, it is recommended that the uprights have at least 500 mm of clearance above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard Gsdpfxjmkixwj Ac Dobk - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany Godpfx Aomhh Dtjc Dsbk - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: naujas, Gamybos metai: 2024, keliamoji galia vienai konsolės svirčiai: 500 kg, lentynos aukštis: 3 200 mm, bendras ilgis: 2 100 mm, bendras aukštis: 3 200 mm, ašių atstumas: 1 000 mm, apkrova vienai atramai: 2 500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack uprights, height 3.2 m, with foot section, 1.8 m usable depth (2 m total depth) 12 cantilever arms with 1.8 m usable depth (for chipboard sheets approx. 2.1 m deep) Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Mounting hardware (bolts, nuts, and washers) Net price: €2,490.00 plus VAT. Detailed description: - Robust steel construction made of IPE sections (bolted system) - Rack height 3,200 mm - Load capacity per upright: 2,500 kg - Foot section and cantilever arms: 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height-adjustable in 100 mm increments - 4 bolted cantilever arms per upright, standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Includes longitudinal and diagonal bracing for 1,000 mm spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. Materials are sensibly packed to enable easy unloading. Delivery for items in stock can be made approx. 1 week after receipt of order. Gedpfx Asqt Dmysc Debk When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, capable of accepting anchor bolts, and able to absorb the acting loads. Floor condition and load bearing capacity as well as any permits required by authorities must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site. Anchoring to a wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have at least 500 mm clearance above the top storage level relative to the top of the upright.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: Gbjdpfx Acjguk Dvj Dsk - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Būklė: geras (naudotas), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, toolbox - Toolbox: equipped with spark-proof tools - Contents: see photos - Dimensions: 430/200/H230 mm - Weight: 28 kg Gjdpfx Aeizc Dxjc Djbk

Būklė: naujas, Gamybos metai: 2026, Reinforced SPCC steel construction – ensures stability and durability for many years. Stainless steel 201SS worktop – resistant to oils and greases. 7 fully extendable drawers on ball-bearing slides – smooth operation and secure closing. Individual drawer locking – safe handling during transport or movement. Central locking system plus side cabinet lock – protects tools from unauthorized access. Large 12.5 cm (4.9 inch) rubber casters with brakes – high mobility even on uneven surfaces. Ergonomic maneuvering handle – comfortable and precise handling. Reinforced all-metal design – ideal for professional use. The ideal choice for workshops, service centers, mechanics, and demanding DIY enthusiasts. Product dimensions: 770 x 465 x 800 mm Dimensions with casters and handle: 840 x 465 x 965 mm Net/Gross weight: 48 kg / 52 kg Gsdpjyi Uhajfx Ac Dsbk Material: SPCC (cold-rolled steel) Worktop: Stainless steel 201SS 12.5 cm (4.9 inch) rubber casters, two with brakes Number of drawers: 7 Small drawer dimensions: 53 x 39 x 6.8 cm; Large drawer dimensions: 53 x 39 x 15 cm Additional accessories: Side doors, 2 sets of keys, user manual

Būklė: naujas, Gamybos metai: 2026, max. workpiece length 4,400 mm Milling spindle: 1 unit Main motor: 19.2 kW Control system: Beckhoff CNC machining center MASTERWOOD 4 WIN ----- Specifically designed for efficient and flexible production of wooden windows and doors. HIGHLIGHTS: - Various tool magazines for optimal tool setup - Simultaneous loading of 4 workpieces - Patented clamping system for optimum processing results - CNC-controlled worktable with automatic positioning of beams and clamps - Automatic reclamping for quick changing between exterior and interior profiling - INTEGRATED window manufacturing software, i.e., the machine does not require (but can, if desired) external industry software to be controlled from the office - Powerful 19.2 kW HSK-63 E motor Please note that this stock machine is located at our facility in Oberkochen and already comes equipped with many useful options. Short-term delivery of tools available on request! Request a quote and see for yourself the unbeatable price-performance ratio! VIDEO of the machine available upon request! You will find the technical description of the machine as a PDF document attached. We would also be happy to accept your used machine as a trade-in at a fair price! Matching stationary or mobile extraction systems available on request! (e.g., #5674 NESTRO NE 300) Godpfxoyyqm Us Ac Dsbk Suitable compressor available on request! (#5997 Kaeser Aircenter SM 15) (Technical data as per manufacturer – subject to change and without liability!)

Būklė: nepatikrintas (naudotas), Dėl nenaudojimo parduodamos 2 Rollomatic šlifavimo staklės! CNC 24F3, CNC 24 FJ. Gedpfx Acsyxwylo Djbk

Būklė: naudotas, rida: 352 km, galia: 110 kW (149,56 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, kita apžiūra (TÜV): 04/2028, spalva: balta, pavaros tipas: automatinis, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 4 300 mm, krovinių skyriaus plotis: 2 100 mm, krovos erdvės aukštis: 400 mm, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas,

Būklė: naudotas, rida: 352 km, galia: 110 kW (149,56 AG), pirmoji registracija: 04/2026, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, kita apžiūra (TÜV): 04/2028, spalva: balta, pavaros tipas: automatinis, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 4 300 mm, krovinių skyriaus plotis: 2 100 mm, krovos erdvės aukštis: 400 mm, Įranga: ABS, centrinis užraktas, elektroninė stabilumo programa (ESP), oro kondicionavimas,