Krosnelė pirkti naudotą (223)

Būklė: naudotas, Gamybos metai: 2011, Technical Details: Minimum temperature: 1° Maximum temperature: 199° Electrical specification – Voltage/Frequency: 380 / 50 V/Hz Heating capacity: 1.8 kW (1800 watts) Protection rating: IP54 Total power requirement: 16.2 kW Machine weight approx.: 0.93 t Dimensions (L x W x H): 2.85 x 2.0 x 1.4 m Pre-polymerization tunnel – Heat treatment tunnel Application: Drying for washing and painting lines – continuous feed Fjdeu Nw E Uepfx Ahwjfw Sold as is and as described! Further features: – Recommended temperature according to manufacturer: max. 80°C; safety setting: 90°C; heating 230V – With chain conveyor / Teflon feed line – Chain width: 200 mm – Max. workpiece width: 150 mm Pass-through (W x H): 150 x 110 mm, conveyor height: 600 mm; drive motor SEW Eurodrive (gear motor) power: 0.18 kW Loading opening (W x H): 500 x 800 mm Discharge door (W x H): 600 x 1200 mm Service door (W x H): 800 x 980 mm with safety interlock Internal height: 1400 mm

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, 12 months warranty, stock item, new device - Model on castors Ffjdpsiqkr Iefx Ahwjw - Max temperature: 300 °C - Oven chamber volume: 1050 liters - External dimensions: 1470 x 970 x 1920 mm (W x D x H) - Oven chamber: 1200 x 670 x 1400 mm (W x D x H) - Controller B510 (5 programs with 4 steps each), also available with C550 (10 programs with 20 segments each) - Horizontal, forced air circulation results in temperature uniformity according to DIN 17052-1 better than +/− 5 °C in the empty usable space (with exhaust flap closed) - Permissible batch weight: 250 kg with evenly distributed load - Maximum load per shelf: 30 kg with evenly distributed load - Reinforced floors and rails for 80 kg distributed load available on request - Shelves included in delivery: 4 pcs - Max number of shelves: 14 pcs, available at short notice - Connected load: max 9.3 kW - Fan capacity: approx. 500 m³/h - Connection: 380–415 V 3/N/PE 50 Hz - Net weight: 450 kg - Documentation, CE declaration Packaging on pallet: 170 x 135 x 210 cm, 450 kg This oven must not be used for materials containing solvents or for heating food, animals, wood, grain, etc. Keywords: oven, ovens, industrial oven, heating cabinet, thermal oven, laboratory oven, drying oven, tempering oven, test chamber

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 900 mm, bendras plotis: 1 530 mm, bendras aukštis: 2 150 mm, įėjimo įtampa: 400 V, valdymo įtampa: 24 V, Sertifikuota DGUV iki: 01/2027, įvesties srovės tipas: trifazis, vandens jungtis: 20 mm, Etatinė krosnis Wiesheu EBO 3-124 Apatinis ir viršutinis šildymas reguliuojami atskirai 3 kepimo aukštai Orkaitė mobilus su fiksatoriumi Viršuje garų nusiurbimo gaubtas su kondensatoriumi Ffjdeyaf Rgspfx Ahwow Apačioje rasinimo spinta Modulinė sistema Jungtis 400V, 16A CEE kištukas Vandens jungtis 3/4 colio, vandens nutekėjimas DN 40 Matmenys: 1530 x 900 x 2150 mm (PxGxA) Naudota orkaitė Papildomai: Vandens filtras Nuėmimo įrenginys Rankinis kroviklis/nuėmėjas Priežiūros sutartis Pristatymas ir prijungimas Instrukcija ir paleidimas Turime didelį krosnių pasirinkimą!

Būklė: naujas, Electrically heated chamber furnace, manufacturer VEI Fodocdiu Iepfx Ahwofw Model: KA_EB_TO External dimensions (W x H x D): 2500 x 2900 x 1700 mm Usable dimensions (W x H x D): 1250 x 2000 x 1250 mm Temperature: 250°C Heating capacity: 24 kW

Būklė: naujas, Gas-fired chamber furnace, manufacturer VEI Model: KA_GB_TO External dimensions (W x H x D): 3000 x 3700 x 2300 mm Internal dimensions (W x H x D): 1500 x 2200 x 1500 mm Ffedpfjcditnjx Ahwow Temperature: 300°C Loading capacity: max. 2,500 kg Recirculation fans: 2 x 4.0 kW = 8 kW Heating power: 120 kW

Būklė: naujas, Electrically heated recirculating chamber furnace (horizontal air circulation) Max. temperature: 650°C Usable chamber dimensions (W x H x D): 1000 x 1000 x 2000 mm Heating power: 72 kW Ffedpfx Ahodhzimowew Recirculating fan: 1 x 4 kW

Būklė: naujas, Electrically Heated Circulating Air Chamber Furnace (Horizontal Airflow) Maximum temperature: 550°C Fodsdt R Uuopfx Ahwjfw Usable dimensions (W x H x D): 900 x 1300 x 1800 mm Batch weight: 800 kg gross Heating capacity: 72 kW Recirculation fan: 1 x 7.5 kW

Būklė: naujas, Electrically heated drying oven with conveyor belt (for non-explosive materials) Ffsdpfsdgvufox Ahwew TECHNICAL DATA Type: VEI_DLO_EB 350-720 Max. temperature: 420°C Operating temperature: approx. 350°C Total electrical connected load: 60 kVA Heating power: 48 kW Gear motor: 0.55 kW Air circulator: 2 x 4 kW Number of control zones: 2 External dimensions (approx.): Length: 8500 mm Width: 1800 mm Height: 2625 mm Usable dimensions: Conveyor belt width: 900 mm Clear pass-through height: 150 mm Heated length: approx. 7200 mm

Būklė: naujas, TECHNICAL DATA Type: gas-fired pass-through chamber furnace Internal dimensions (W x H x D): 2200 x 2350 x 3000 mm Number of control zones: 2 Maximum charge weight: approx. 2.5 t Ffodog Dgymopfx Ahwew Control system: Siemens S7

Būklė: naudotas, Gluing unit, gluing assembly, gluing head, heated glue pot for edge bander, edge banding machine, premelter unit with granulate hopper -Manufacturer: HOMAG -Scope of delivery: see pictures -Electrically heated -Quantity: 1x glue pot available -The premelter ensures you always have sufficient hot-melt adhesive ready -Dimensions: 480/220/H200 mm Ffedpfx Aheb Uhk Uowow -Weight: 30 kg/unit

Būklė: naudotas, Laminating unit, laminating part, laminating head, heating tank for edge bander, edge banding machine, premelting unit with granulate container - The premelter ensures a constant supply of hot-melt adhesive - Manufacturer: ENA - Model: 15-259 - Electrically heated - Dimensions: 580/220/H570 mm - Weight: 18.7 kg Fsdpfx Ahed Dt R Eswsfw

Būklė: naudotas, Bonding unit, bonding component, bonding head, heating pot for edge bander, edge banding machine, pre-melting unit with granulate container - With the pre-melter, you always have a sufficient supply of hot-melt adhesive - Manufacturer: ENA - Type: 4-060-15-0600 - Electrically heated Ffjdpfx Asd Dt Rzohwew - Dimensions: 470/175/H385 mm - Weight: 20.3 kg

Gamybos metai: 2001, būklė: geras (naudotas), 1 naudota grūdinimo krosnis Fedpfx Ahoxpf I Nowsfw Gamintojas: Nabertherm, tipas N 321 Serijos nr.: 160897, Pagaminimo metai: 2001, Maks. temperatūra: 1 200°C, Maitinimo galia: 400V, 47 kW Vidiniai matmenys: 750 x 1100 x 400 mm Naudinga talpa: 320 litrų Svoris apie 1,6 t Matmenys: Ilgis apie 2 m, plotis apie 1,5 m, aukštis apie 2 m,

Gamybos metai: 1994, būklė: naudotas, Maximum temperature: 1100°C Fedpfx Ajthr Ncshwofw Voltage: 230 V Power: 3 kW Internal dimensions: 295 x 230 x 125 mm

Būklė: naujas, Heating output 30 kW Dimensions (L/W/H) 105 cm x 60 cm x 147 cm Fedpfx Asvxa Itohwofw - NEW - Kanuk Turbo 2 *new design* Warm air furnace including heat exchanger and warm air blower Nominal heat output: 30 kW Dimensions: 105 cm x 60 cm x 147 cm Heatable room volume: 1000 m³ Log length: 80 cm Efficiency: 82.4% Flue pipe connection: 150 mm Item no. 2100006

Būklė: naujas, - NEW - without side paneling and without base frame Kanuk® Original Hot Air Furnace - Firebox opening H x W (cm): 90 / 64 - Flue pipe connection: top / rear - Efficiency (%): 85.2 - Log length (cm): 55 - Minimum chimney draught (Pa): 16 - Ash drawer: No - BimSchV Stage 2: Yes - Lignite briquette: No - CE mark: Yes - Total output (kW): 26 - Room heating capacity (m³): 1000 - Viewing window (cm): 34.5 x 22 - Weight (kg): 193 - Wood consumption (kg/h): 6.5 - Flue gas throttle: No - Design type 1 (self-closing door): Optional Ffsdpfsvwfz Asx Ahwsw - Log wood, wood briquettes: Yes - AT §15a B-VG standard: Yes - External air connection (mm): 120 mm - Dimensions H x W x D (cm): 90 / 64 / 110 - Flue pipe connection (mm): 160 - Door diameter (cm): 28 - Flue gas temperature (°C): 229 - Flue gas mass flow (g/s): 18.5 - Firebox H x W x D (cm): 50 x 55 x 55 - Glass air-wash system: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - LRV Switzerland: Yes No. 2100109

Būklė: naujas, - NEW - Kanuk® Original Hot Air Furnace Nominal Heat Output: 15.4 kW Dimensions: 80 x 58 x 95 cm Heatable Room Volume: 450 m³ Efficiency: 83.4 % Log Length: 48 cm Flue Connection: 160 mm Total Output (kW): 15.4 Dimensions H x W x D (cm): 80 / 58 / 95 Room Heating Capacity (m³): 450 Flue Connection (mm): 160 Flue Connection: top / rear Viewing Window (cm): 28 x 15 Efficiency (%): 83.3 Weight (kg): 148 Flue Gas Temperature (°C): 216 Log Length (cm): 48 Wood Consumption (kg/h): 3.9 Flue Gas Mass Flow (g/s): 14.28 Minimum Chimney Draft (Pa): 16 Exhaust Throttle Valve: No Combustion Chamber H x W x D (cm): 40 x 44 x 49.5 Ash Pan: No Type 1 (self-closing door): Optional Fjdsvwf Rkopfx Ahwefw Airwash System: Yes Compliant with BimSchV Stage 2: Yes Suitable for Firewood, Wood Briquettes: Yes DIN EN Standard: 13240 Suitable for Lignite Briquettes: No AT §15a B-VG Standard: Yes Primary, Secondary, Tertiary Air: Yes CE Mark: Yes External Air Connection (mm): 100 LRV Switzerland: Yes No. 2100102

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Daugiapakopis pečius Sweba Dahlen Fjdpew Ttl Esfx Ahwjfw Modelis: S-22 S Nerūdijančio plieno korpusas Rankinis valdymas Matmenys: 1600 x 1000 x 1800 mm Jungtis: 400V, 11,6 kW, 32A-CEE kištukas Naudotas pečius Turime ir daugiau kepimo krosnių sandėlyje!

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Fedpfxevz Hq Tj Ahwsfw Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm Ffjdpfx Ahsvz Hq Hjwow - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. Ffjdpfjvz Hqyjx Ahwow The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Ffsdpfx Ahjvz Hqtowew Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm Ffedpfx Ahjvz Hqmswow - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h Fjdpfxjvz Hqge Ahwofw - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm Ffsdpfx Ahjvz Hhxswow - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.