Konsolės Frezavimo Staklės pirkti naudotą (48 359)

Sąlyga: naudotas, Gamybos metai: 1977, Funkcionalumas: nepatikrintas, Valdymo tipas: konvencinis Ašių eiga: X: 1120 mm Y: 345 mm Z: 400 mm Pado greičiai – vertikaliai: 5–250 mm/min Pado greičiai – išilgai ir skersai: 16–800 mm/min Stalo paviršius: 400 x 1600 mm Sūkių diapazonas: 28–1400 aps./min Įrankio tvirtinimas: SK50 Bendras galios poreikis: 14,5 kW Mašinos svoris apie: 3,65 t Ploto poreikis apie: 2345 x 1950 x 2060 mm (IšxPlxAuk) Išorinė valdymo spinta su kištukinėmis jungtimis. Komplektacija: - 3 ašių skaitmeninis indikatorius - Pakabinamas, pasukamas valdymo pultas Mašiną galima patikrinti/atlikti demonstraciją vietoje esant elektros tiekimui. Fjdpfx Aswdivvsb Sopb Visa informacija pateikiama be garantijos. Tarpinis pardavimas galimas.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Konsolinė frezavimo staklė Reckermann 1300 Kombi Fodpfxox A Etfo Ab Sepb Staklės yra visiškai naujos būklės. Klientas negavo detalių, kurioms buvo numatyta ši staklė.

Sąlyga: paruoštas naudoti (naudotas), Travel (X/Y/Z): 600mm/480mm/390mm, Spindle speed: 2550 rpm, Table dimensions (X/Y): 900mm/500mm, Max. table load: 360kg, Feed rate: 600mm/min. Machine dimensions (X/Y/Z): approx. 1650mm/1850mm/1900mm, Weight: approx. 1900kg, Digital readout: Newall OP 700. Documentation available. On-site inspection possible. Fpodewn H Tyspfx Ab Ssb

Gamybos metai: 1994, Sąlyga: paruoštas naudoti (naudotas), A double-spindle milling machine (horizontal and vertical) by Rackermann is available. Travel path X/Y/Z: 1000mm/370mm/450mm, table dimensions X/Y: 1300mm/400mm. Horizontal: Tool holder: SK40, max. tool diameter: 250mm, milling spindle swivel range: +/-90°, quill adjustment: 120mm, spindle diameter: 60mm, speed: 2100rpm. Vertical: Tool holder: SK40, max. tool diameter: 280mm, spindle diameter: 90mm, speed: 1400rpm. Feed rate X/Y/Z: 4m/min, feed force X/Y/Z: 10kN/10kN/30kN, rapid traverse X/Y/Z: 5m/min. Machine dimensions X/Y/Z: approx. 5500mm/4100mm/2500mm, weight: approx. 5400kg. Documentation available. Inspection on site is possible. Fpsdpfov Hrfmsx Ab Ssb

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras svoris: 200 kg, šlifavimo disko skersmuo: 100 mm, stalo ilgis: 330 mm, stalo plotis: 110 mm, Nėra minimalios kainos – garantuotas pardavimas didžiausią kainą pasiūliusiam! Įranga parduodama aukcione dėl įmonės likvidavimo. Pasiūlymas įpareigoja laiku atsiimti įrangą 2026-01-26 – 2026-01-29 laikotarpiu! Fpodpfx Absxqnuhj Sjb TECHNINIAI DUOMENYS Stalo matmenys: 330 x 110 mm Šlifavimo rato skersmuo: 100 mm ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 800 x 650 x 1.500 mm Svoris: 200 kg

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Ši Okuma MCR-A5C30x65 portalinė frezavimo staklė pagaminta 2013 metais. Ji turi tvirtą 100 mm veleną, galintį dirbti iki 4000 min⁻¹ greičiu, ir talpina maksimalų ruošinio dydį – 2540 mm x 5540 mm. Stalas, kurio matmenys 2500 × 6300 mm, gali atlaikyti iki 30 000 kg svorį. Puikiai tinka sunkiam frezavimui, nes greitoji pastūma siekia 20 000 mm/min. Dėl išsamesnės informacijos apie šias stakles susisiekite su mumis. Pritaikymo tipai: Fsdpfx Abjx D S Eke Sjpb Frezavimas

Sąlyga: labai geros būklės (naudotas), KATALOGO NUMERIS: 7003 Techniniai duomenys: - veleno skersmuo: 25 mm - veleno darbinis aukštis: 80 mm - keičiama velenė - veleno fiksavimas - reguliuojamas aukštyn/žemyn - originalus ketaus kreiptuvas - 2 apsisukimų greičiai + dešinė/kairė - stalo matmenys: 1000x800 mm - variklis: 3 kW - matmenys (ilgis/plotis/aukštis): 1280x860x1100 mm Fpodpfx Abox Tgrye Sjb - svoris: 465 kg Privalumai: – Bulgarijos gamyba – labai gera būklė – naudota frezavimo staklė Grynoji kaina: 5 500 PLN Grynoji kaina: 1 300 EUR pagal 4,2 EUR kursą (Kainos gali kisti esant didelėms svyravimo reikmėms)

Sąlyga: labai geros būklės (naudotas), Pristatymas į ES ~300 eurų Fpsdpsl Skk Uefx Ab Sjb

Sąlyga: geras (naudotas), For sale: Edge bevelling machine. - Assfalg ASO 750. Fodpsv T Ttfjfx Ab Sopb - 1.1 kW motor. - We can help you arrange a cost-effective shipping company or courier service.

Sąlyga: naujas, Gamybos metai: 2025, Order today the CORMAK ZX 7550 CW – a compact universal milling machine, ideal for tool rooms and maintenance departments. This exceptionally versatile machine is immediately available from stock. Discover the features that make the ZX 7550 CW stand out in the market: Machine Features Automatic Table Feed in X and Y Axes: Achieve precision and efficiency with automatic table feed in two planes. Reach excellent results effortlessly. Mechanical Table Feed in Z Axis: Innovative mechanical Z-axis feed enables quick and precise material processing. Reduce work time without compromising quality. Heavy Duty, Stable Cast Iron Frame: The robust construction ensures stability and durability. The heavy cast iron casting provides precise workmanship, translating into machining accuracy. Massive Cross Table with Precision Ground Surface: The cross table is manufactured with great attention to detail, particularly regarding the precision ground surface, guaranteeing perfectly smooth material processing. Dovetail Guides on All 3 Axes: Thanks to innovative dovetail guides on all axes, the machine achieves maximum movement precision in all three axes. Obtain exact results without compromises. Quiet Operation Thanks to Ground Gears: Work without unnecessary noise. Thanks to ground gears, the machine operates smoothly and quietly, providing a comfortable working environment. Left and Right Spindle Rotation: Adjust the operation to your needs. The machine features bidirectional spindle rotation, offering even greater flexibility in material processing. ±90° Swiveling Head: Rotate the head in any direction. With the ±90° swiveling function, the machine adapts to various projects and applications. The CORMAK ZX 7550 CW is not just a milling machine – it’s a tool that meets even the most demanding challenges. Order now and experience excellence in material processing! Technical Specifications: Max. drilling diameter: 50 mm Max. horizontal milling length: 100 mm Max. vertical milling diameter: 25 mm Max. tapping diameter: M16 Max. boring diameter: 120 mm Spindle taper: ISO 40 Spindle speed range and number (vertical, 50Hz): 115-1750 rpm (8) Spindle speed range and number (horizontal, 50Hz): 60-1350 rpm (9) Distance from spindle to column: 200-700 mm Distance from spindle to table: 100-480 mm Distance from spindle axis to table: 0-380 mm Quill travel: 120 mm Table size: 1000x240 mm Table travel: 600x230 mm Table feed: 24-720 mm/min (8 speeds) Fedpfx Ajud Icqsb Sopb Spindle feed: 0.015; 0.08; 0.25 mm/rev Number, width, and spacing of T-slots: 5 / 14 mm / 44 mm Motor power (Vertical/Horizontal): 0.85-1.5 / 1.5 kW Overall dimensions: 1120x1060x2035 mm Weight: 970 kg Equipment (depending on version): SINO 3-axis digital readout ISO 40/Morse taper reducing sleeves 1-16 mm drill chuck EC declaration of conformity 160 mm machine vise Arbor with a set of collets for end mills Horizontal spindle support / overarm Long milling arbors Basic tools 24V halogen lighting system Cooling system English user manual

Sąlyga: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, bendras svoris: 700 kg, bendras ilgis: 1 000 mm, bendras plotis: 900 mm, bendras aukštis: 1 600 mm, veleno greitis (maks.): 1 900 aps./min, mašinos/transporto priemonės numeris: 50025, Nėra minimalios kainos – garantuotas pardavimas aukščiausią pasiūliusiam! Mašina parduodama aukciono būdu dėl įmonės uždarymo. Pateikus pasiūlymą, būtina įsigyti ir atsiimti įrenginį laiku tarp 2026.01.26 ir 2026.01.29! TECHNINĖ INFORMACIJA Veleno apsukos: 19 – 1.900 aps./min ĮRENGINIO INFORMACIJA Fedpfjxqmpdsx Ab Sspb Matmenys ir svoris Matmenys (I x P x A): 1.000 x 900 x 1.600 mm Svoris: 700 kg

Sąlyga: naujas, Catalog No.: S0367 TECHNICAL DATA Work table dimensions: 800x800 mm Motor power S1/S6: 3.0 / 4.4 kW Table hole diameter: 190 mm Spindle diameter: 30 mm Spindle tilting: 0° - 45° Spindle speed: 1400 / 3500 / 6000 / 8000 rpm Rotation: right, left Spindle vertical travel: 175 mm Spindle working height: 125 mm Max. tool diameter for profiling / for tenoning: 180/250 mm Extraction port diameter: 120 mm Dimensions (LxWxH): 2800x1800x1090 mm Weight: 410 kg PRODUCT FEATURES - Large, heavy-duty cast iron work table. - Table hole diameter of 190 mm with under-table extraction. - Electronic spindle speed readout. - Spindle guard for 180 mm diameter. - Installed spindle lock. - 4-speed operation. - Forward spindle tilting. Fsdpox Tgrgofx Ab Sjpb ADVANTAGES – Brand new machine – Tilting spindle – With side sliding carriage – CE certificate Optional: – Motor power 4.0 (5.5) kW (HP) – Spindle guard for profiling up to 250 mm – Integrated safety guides 350, 500 mm – Table extensions on left and right – Spindle diameter 1 1/4”, 32, 35, 40, 50 mm Price includes the spindle moulder with a sliding side carriage. Net price: 17,200 PLN Net price: 4,100 EUR (based on an exchange rate of 4.20 EUR) (Prices are subject to change with significant exchange rate fluctuations)

Sąlyga: naujas, Gamybos metai: 2025, The ZX 7045E mill-drill is a versatile machining tool designed for steelworking. It excels in drilling, reaming, boring, tapping, as well as conventional and face milling. The machine provides precise drilling in cast iron up to 45/40 mm diameter. In addition, it enables tapping up to M12 mm, milling up to 80 mm width, and slotting to a depth of 22 mm. The ZX 7045E mill-drill is a reliable tool ready for immediate use! Machine Features - Heavy Duty Cast Iron Base: Robust construction based on a heavy cast iron frame ensures stability and durability, even during intensive use. - Milling Head Height Adjustment on the Support: Unique height adjustment on the support, rather than on the column, allows for adaptation to a wide range of applications. - Large Cross Table: A substantial, precisely ground table surface provides a solid work foundation for a variety of projects. - Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along three axes, resulting in excellent machining accuracy. - Quiet Operation with Ground Gears: Ground gears guarantee low-noise operation, enhancing workshop comfort. - Left and Right Spindle Rotation: Enables bi-directional tool rotation to suit various tasks. - Head Rotates +/- 90 Degrees with Adjustable Height: Flexible angle and height adjustment for complete control over material handling. Additional Options and Benefits: The ZX 7045E is available for immediate delivery from stock and comes with a complimentary accessory set: - Drill chuck - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve The ZX 7045E mill-drill is more than just a tool; it’s a partner capable of meeting even the most demanding challenges in your workshop. Order now and experience outstanding precision and performance! (Base available as an option) Fpodpfxsud Izts Ab Sjb Technical Data Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end-mill diameter: 28 mm Maximum tapping size: 12 mm Quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds at 1400 rpm motor): 95, 170, 280, 540, 960, 1600 rpm Max. distance spindle nose to table: 460 mm X/Y/Z travel: 500 / 210 / 425 mm Distance spindle to column: 245 mm Table size: 730 x 210 mm Base size: 400 x 600 mm Motor (S1/S6): 1500W/2100W 400V Overall dimensions (with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment Includes: - Drill chuck arbor MK3/B18 - Basic service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MT4/MT3 - Reducing sleeve MT3/MT2

Sąlyga: labai geros būklės (naudotas), Catalogue number 7382 Fpsdpfx Aox S Iw Usb Seb TECHNICAL DATA Tenoning carriage: - Powered carriage feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor 0.46 kW - Table size (L/W): 700x450 mm, extendable to 1150 mm - Cross fence on carriage – cutting length on telescopic extension: 1860 mm - Swivel block in fence - 2 pneumatic clamps Cross-cut saw: - Max blade diameter: 380 mm - Max cutting height: 110 mm - Blade adjustable up/down, forward/back, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Height and stroke adjustment via handwheels - Max tool diameter: 320 mm - Spindle diameter: 40 mm - Spindle working height: 220 mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Height and stroke adjustment via handwheels - Max tool diameter: 200 mm - Spindle working height: 220 mm - Spindle diameter: 54 mm - Spindle lock - Retractable support from table - Motor: 7.5 kW Glazing bar cutting saw: - Max blade diameter: 200 mm - Bore diameter: 30 mm - Blade adjustable front/back, up/down - Blade guard - Motor: 2.2 kW Feeder: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50 mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameter: 60 mm, 2x130 mm, 110 mm, 100 mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600 mm, weight approx. 2500 kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Cross-cut saw – Tenoning spindle – Unpainted, used machine, very good condition Net price: 27,900 PLN Net price: 6,640 EUR based on a rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Sąlyga: naujas, Gamybos metai: 2025, Our ZX7045 B1 milling-drilling machine is designed for drilling, tapping, reaming, boring, and enlarging holes up to 45/40 mm in cast iron, and tapping up to M12 mm. The ZX7045 B1 version is equipped as standard with an automatic spindle feed and an efficient cooling system, providing not only excellent performance but also optimal working conditions. With a milling capacity up to 80 mm in width, keyway milling up to 22 mm, as well as the ability to perform end and face milling operations, this milling-drilling machine becomes an indispensable tool for a wide range of applications. Product features: - HEAVY DUTY STABLE CAST IRON BODY - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTABLE ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - ROBUST CROSS TABLE WITH PRECISION-GROUND SURFACE - DOVETAIL GUIDES Fpedpovxth Hefx Ab Sob - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT ROTATION - SWIVEL HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - Machine base available as an optional accessory TECHNICAL DATA: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT 4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORKTABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX. DISTANCE SPINDLE TO TABLE: 445 mm DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm TRAVEL X/Y/Z: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL RANGE LEFT/RIGHT: 90° MOTOR POWER: 1.8kW / 2.5HP POWER SUPPLY: 400 V WEIGHT: 350 kg

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7252 TECHNINIAI DUOMENYS - Veleno skersmuo: 25 mm - Darbinis veleno aukštis: 170 mm - Veleno atrama - Keičiamas velenas - Veleno užraktas - Stalas reguliuojamas aukštyn/žemyn - Originali kreipiančioji - 4 sukimosi greičiai + kairė/dešinė: 3000, 4500, 6000, 9000 aps./min. - Stalo matmenys: 980x980 mm - Variklis: 3 kW - Matmenys (ilgis/plotis/aukštis): 1100x1000x1370 mm - Svoris: 682 kg PRIVALUMAI – Pagaminta Vokietijoje – Veleno atrama – Labai gera būklė – Naudota frezavimo staklė Fpjdpfx Abex S Ikno Ssb Grynoji kaina: 6900 PLN Grynoji kaina: 1640 EUR pagal 4,2 EUR kursą (Kainos gali keistis esant didesniems svyravimams)

Sąlyga: naujas, Gamybos metai: 2025, The ZX 7045E 230V drilling and milling machine is a versatile tool for metalworking, ideal for drilling, reaming, boring, tapping, face and side milling operations. The machine allows precise hole drilling in cast iron up to 45/40 mm in diameter. Additionally, you can tap threads up to M12, mill up to 80 mm in width, and create grooves up to 22 mm deep. The ZX 7045E is a reliable tool ready for any job! Machine Features - Heavy-Duty Cast Iron Base: The robust construction with a heavy cast iron frame guarantees stability and durability even under intensive use. - Milling Head Height Adjustable on the Support: Unique height adjustment on the support instead of the column allows adaptation to various applications. - Heavy-Duty Cross Table: The generously sized, precisely ground worktable ensures a solid foundation for a range of projects. - Dovetail Guideways: Innovative dovetail slideways provide smooth movement along all three axes, ensuring excellent machining results. - Quiet Operation Thanks to Ground Gears: Precision-ground gears ensure quiet running and improved workshop comfort. - Left and Right Spindle Rotation: Switch spindle rotation direction for diverse tasks. - Swiveling Head +/- 90° and Adjustable Head Height: Flexible head positioning and height adjustment give you full control over your work. Extras and Benefits: The ZX 7045E model is available from stock and includes a free accessory set: - Drill chuck - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve The ZX 7045E is more than just a tool – it’s a partner ready to handle even the most demanding challenges in your workshop. Order now and experience outstanding precision and performance! (Base available optionally) Technical Data Maximum drilling diameter: 45 mm Fodpfxswnb T Io Ab Sepb Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum tapping diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speed (6 speeds for 1400 rpm motor): 95, 170, 280, 540, 960, 1600 min-1 Max. spindle nose to table distance: 460 mm Travel X / Y / Z: 500 / 210 / 425 mm Spindle to column surface distance: 245 mm Worktable size: 730 x 210 mm Base dimensions: 400 x 600 mm Motor power s1/s6: 1500W/2100W 230V Machine dimensions (h x w x d with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment: - Drill chuck arbor MK3/B18 - Service tools - Drill chuck 3-16 mm/B18 - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Katalogo numeris: 7364 TECHNINIAI DUOMENYS - didžiausias apdirbamos medžiagos aukštis: 160 mm - darbinis veleno ilgis: 250 mm - veleno skersmuo: 40 mm - didžiausias įrankio skersmuo: 220 mm - darbinis stalas (ilg/pl): 410x1000 mm - variklis: 11 kW - 2 pneumatiniai medžiagos spaustuvai - dulkių nutraukimo jungties skersmuo: 160 mm - matmenys (ilg/pl/aukšt): 1070x1260x1400 mm - svoris: 650 kg Fpjdpfxox Sylqe Ab Ssb PRIVALUMAI – vokiška gamyba – papildomas frezų komplektas + kopijavimo įtaisas – nedažyta iš naujo – naudota frezavimo staklė, labai geros būklės Grynasis kaina: 33 900 PLN Grynasis kaina: 8 070 EUR pagal kursą 4,2 EUR (Kainos gali keistis esant didesniems svyravimams)

Sąlyga: naujas, Gamybos metai: 2025, Machine Characteristics - Automatic feeds in X, Y, Z axes ensure precise machining of materials in three dimensions. - Rapid traverse of all axes and stepless feed enable efficient operation for a wide range of tasks. - Digital display and user-friendly Schneider Electric control panel provide intuitive process control. Technical Specifications TABLE DIMENSIONS: 1600x360 mm MAX. TABLE TRAVEL (X/Y/Z): 1300x300x420 mm T-SLOTS (NUMBER/WIDTH/SPACING): 3 / 14 mm / 95 mm MAX. TABLE SWIVEL ANGLE: ±45° TABLE FEED RATE X/Y: 25~800 mm/min Z: 8-267 mm/min SPINDLE TAPER (VERTICAL/HORIZONTAL): 7:24 ISO 50 / 7:24 ISO 50 DISTANCE FROM TABLE CENTER TO COLUMN SURFACE: 230-530 mm SPINDLE TO TABLE DISTANCE: 0-420 mm DISTANCE FROM VERTICAL SPINDLE FACE TO TABLE: 150-570 mm SPINDLE SPEED (VERTICAL/HORIZONTAL): (12) 60-1750 / (12) 58-1800 rpm HORIZONTAL SPINDLE MOTOR POWER: 5.5 kW Fsdpfx Abeg Nghts Sjpb VERTICAL SPINDLE MOTOR POWER: 4.5 kW TABLE FEED SERVO DRIVE: 2.36 kW / 15 Nm DIMENSIONS (LxWxH): 2550x2161x2102 mm WEIGHT: 2885 kg Additional Equipment: - 3-Axis Digital Readout - SERVO DRIVE - Long Spindle ISO 50/27 mm / ISO 50/32 mm - ISO 50 / MT4 Adapter - ISO 50 Arbor with ER32 Collets (4, 6, 8, 12, 16, 18, 20, 26 mm) - Work Light - Coolant System - Centralized Lubrication System - Table Feed for X, Y, Z Axes - Complete Set of Service Tools - CE Declaration of Conformity - Operation Manual Our UWF 150S SERVO milling machine with swiveling table is the perfect solution for demanding machining tasks, delivering reliability, precision, and productivity. Discover new possibilities in industry with our advanced technologies and robust construction.

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7207 TECHNINIAI DUOMENYS - veleno skersmuo 30 mm - veleno darbinis aukštis 120 mm - keičiama velenas - veleno užraktas - reguliuojamas aukštyn/žemyn - originali ketaus kreipiančioji - 4 sukimosi greičiai + dešinė/kairė - stalo matmenys 1060x770 mm - stalas iš ketaus - variklis 4 kW - matmenys ilg./plot./aukšt. 1060x1050x1070 mm - svoris 510 kg PRIVALUMAI – vokiška gamyba – naudotas frezavimo staklės – labai gera būklė Grynoji kaina: 5.500 PLN Grynoji kaina: 1.300 EUR Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą (esant didesniems kursų svyravimams kaina gali keistis) Fjdpox Syabjfx Ab Sopb

Sąlyga: naujas, Gamybos metai: 2025, The drilling and milling machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. Various accessories can be mounted on the machine. HEAVY AND STABLE CAST IRON BODY MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN MASSIVE CROSS TABLE WITH PRECISION-GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT SPINDLE ROTATION SWIVEL HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Optional machine base available – €200 Technical specifications MAXIMUM DRILLING CAPACITY: 45 mm MAXIMUM FACE MILLING: 80 mm MAXIMUM SLOT/FACE MILLING: 28 mm MAXIMUM THREAD CUTTING: 12 mm QUILL TRAVEL: 120 mm Fsdsud H Hujpfx Ab Sspb SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min⁻¹ MAX. DISTANCE SPINDLE NOSE TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options): 400V (three-phase motor) PACKING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available equipment MK4/B18 drill chuck arbor Service tools 3–16 mm/B18 drill chuck MK4/MK3 reduction sleeve MK3/MK2 reduction sleeve Polish-language operating manual

Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6607 TECHNINIAI DUOMENYS Diskinis pjūklas: - maks. disko skersmuo: 350 mm - velenas: 30 mm - fiksuojamas velenas - disko reguliavimas priekyje/galinėse, aukštyn/žemyn - disko apsauga - variklis: 1,1 kW - nusiurbimo antgalio skersmuo: 80 mm Frezavimo staklės: Obliuojantis velenas: - veleno skersmuo: 40 mm - darbinis veleno aukštis: 140 mm - fiksuojamas velenas - didžiausias frezos skersmuo: 350 mm - 2 apsukų greičiai: 3000, 4500 aps./min - variklis: 5,5 kW - stabdis - šoninė pastūmos vežimėlis – rankinis pastūmimas Fjdpfx Aex Sq Aaeb Sspb - vežimėlio matmenys ilgis/plotis: 1180x600 mm - kampinis liniuotė - 2 pneumatiniai spaustuvai - nusiurbimo antgalių skersmuo: 120 mm - matmenys ilgis/plotis/aukštis: 2600 (siuntimui 2000)/1600/1450 mm - svoris: 735 kg – labai gera būklė – naudota obliavimo staklė Grynasis kaina: 13.900 PLN Grynasis kaina: 3.300 eur priklausomai nuo kurso, 4,2 euro (Kainos gali keistis esant dideliems svyravimams)

Sąlyga: naujas, Gamybos metai: 2025, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, ideal for small and medium-sized maintenance and production departments. This mid-sized machine not only offers automatic feed with a vertical head but also tapping capabilities and standard digital readout. Product Features Standard digital readout. Discover its reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy-Duty Cast Iron Frame: The solid construction from heavy cast iron is the foundation of durability and precision. The ZX 7055 DRO maintains stability even during the most demanding operations. Automatic Feed: Save time and increase productivity with automatic feed. The motor-driven vertical head allows efficient machining of materials without the need for constant supervision. Robust Cross Table with Precision-Ground Surface: Attention to detail is a key aspect of its design. The heavy-duty cross table with a precision-ground surface ensures exceptional flatness for precise machining results. Dovetail Guideways: Innovative dovetail-shaped guideways ensure smooth and accurate movement on all three axes. Achieve excellent results without compromise. Quiet Operation with Ground Gears: Focus on your work, not the noise. Precision-ground gears allow the milling-drilling machine to operate quietly, providing comfort in your working environment. Left and Right Spindle Rotation: Adapt the machine to your needs. The ability to rotate in both directions offers additional flexibility in the machining process. +/- 90° Rotating Head and Adjustable Head Height: Tackle a variety of tasks thanks to the head’s +/- 90° rotation and adjustable height. Achieve precise results under any conditions. The ZX 7055 DRO milling and drilling machine is a modern tool that will redefine your machining experience. Order today and experience exceptional performance in your workshop! MAXIMUM FACE MILL DIAMETER Fsdpfxeud H The Ab Sopb 80 mm MAXIMUM END MILL DIAMETER 32 mm HEAD SWIVEL ANGLE +/- 90° SPINDLE SPEEDS 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEEDS 0.1; 0.18; 0.26 rpm SPINDLE TAPER MT4 SPINDLE TRAVEL 125 mm (automatic feed) WORKTABLE DIMENSIONS 1000 x 240 mm TABLE TRAVEL X/Y 670 x 185 mm T-SLOTS (WIDTH / SPACING / QUANTITY) 18 mm / 80 mm / 3 SPINDLE DISTANCE TO TABLE 90 - 460 mm SPINDLE DISTANCE TO COLUMN 235 mm MOTOR POWER 1.5 kW / 2.1 HP POWER SUPPLY 400 V WEIGHT 425 kg PACKING DIMENSIONS 970 x 760 x 1160 mm Standard Equipment - automatic spindle feed - digital readout - table longitudinal automatic feed with variable speed adjustment - motorized spindle head height adjustment - cooling system

Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6856 TECHNINIAI DUOMENYS - veleno skersmuo 30 mm - darbinis veleno aukštis 110 mm - veleno fiksavimas - elektrinis aukštyn/žemyn + kampo reguliavimas 0,18 kW - originali pilnai reguliuojama liniuotė - 5 greičiai + dešinė/kairė 2900, 4400, 6000, 8000, 10000 aps./min - stalo matmenys 1200x900 mm - ketaus stalviršis - su elektriniu stabdžiu - variklis apie 7,5 kW - ištraukimo antgalio skersmuo 150 mm - išmatavimai ilgis/plotis/aukštis 1750x1200x1750 mm - svoris 990 kg PRIVALUMAI – vokiška gamyba – atverčiamas velenas Fodpfx Abjx R Dw Uo Sspb – stabdis – naudota frezavimo staklė, labai gera būklė Grynoji kaina: 13 900 PLN Grynoji kaina: 3 300 EUR Grynoji kaina apskaičiuota pagal 4,2 PLN/EUR kursą (Didelių valiutų svyravimų atveju kaina gali keistis)

Sąlyga: labai geros būklės (naudotas), KATALOGO NR. 6969 TECHNINIAI DUOMENYS Diskinis pjūklas: - didžiausias disko skersmuo: 300 mm - velenas: 30 mm - didžiausias pjovimo aukštis: 60 mm - reguliuojamas diskas pirmyn/atgal - variklis 2,4 kW Frezeris: statramo velenas: - veleno skersmuo: 40 mm - darbinis veleno aukštis: 190 mm - fiksuojamas velenas - didžiausias frezos skersmuo: 360 mm - variklis 7,5 kW - 2 sukimosi greičiai - medžiagos prispaudėjas - šoninė vežimėlis reguliuojamas aukštyn/žemyn, pirmyn/atgal - kampinė liniuote - ištraukiamas stalo palaikiklis - rankinis vežimėlio pastūmimas - ištraukimo angų skersmuo: 80 mm, 160 mm - matmenys ilgis/plotis/aukštis: 1910x1960x1800 mm - svoris: 830 kg Fpjdjx R Du Hepfx Ab Sob – pagaminta Lenkijoje – DTR dokumentacija – viršutinis valdymo pultas – naudota statramė, labai gera būklė Grynoji kaina: 13 900 PLN Grynoji kaina: 3 300 EUR Grynoji kaina skaičiuojama pagal kursą 4,2 PLN/EUR (kai stipriai keičiasi kursas, kaina gali būti peržiūrima)