Kempak 200 Tig pirkti naudotą (43 089)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. Knjdpjmhh Dtsfx Abksf The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Racking Used: Bolted System, Hot-Dip Galvanised Version Scope of delivery: - 4 upright frames, height 3,500 mm with base foot section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including horizontal and diagonal braces for 1,300 mm frame spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reordering and extensions possible at any time) - (*Offer available for larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Base foot and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes horizontal and diagonal bracing for 1,300 mm frame spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Telephone expert advice - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. Materials are sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowel fixings, and capable of bearing the resulting loads. Customers are responsible for checking and ensuring ground conditions, load capacity, and any required official permits. Ksdpfomhh Dhex Abkenf The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is advised that uprights have at least a 500 mm overhang of the top storage level above the upright’s top edge.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: bolted system, hot-dip galvanized version Scope of delivery: - 4 racking uprights, height 3,000 mm, with base section, 1,200 mm useful depth - 12 cantilever arms, standard, 1,200 mm useful depth - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts re-orderable and expansion possible at any time) Ksdjmhhx Iopfx Abksnf - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface: hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm useful depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length: 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packed in a practical way to enable easy unloading. When installed outdoors, the stated load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, and suitable for anchor bolts, and must be able to bear the applied loads. The floor structure, load-bearing capacity, and any necessary official approvals must be checked and provided by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to German statutory accident insurance (BG) guidelines, it is recommended that the racking uprights have at least 500 mm of clearance above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 3,000 mm with base section, usable depth 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm bay spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards Knsdpfx Abjmhh Anekof - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively produced in Germany. We provide reliable shipping with advance notice before delivery. The material is well packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The flooring must be concrete, level, and suitable for dowels, and able to absorb the acting loads. The condition and load-bearing capacity of the floor as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Bolted system in hot-dip galvanized version: Ex works price: Knsdpfx Abomhhl Hjkjf Robust steel construction made from IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section with 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright fitted with 3 bolt-on cantilever arms, usable depth 1,200 mm, standard (= 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Including mounting material (without floor anchors) Complete with assembly instructions and C4 load capacity signs according to DIN standard

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking Used: Hot-dip Galvanised Bolted System Scope of Delivery: - 4 double-sided uprights, height 3,500 mm, each with 1,200 mm base plates Knedpfemkixwsx Abkjf - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre-to-centre distance - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed Description: - Robust steel construction made of IPE sections - Surface of all components hot-dip galvanised - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, each with 1,200 mm depth, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length: 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification prior to delivery. The material is properly packaged to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, suitable for dowelling, and able to absorb the applied loads. Floor structure and load-bearing capacity, as well as any necessary official approvals, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany Ksdpoh Ek Dajfx Abkjnf - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: paruoštas naudoti (naudotas), Indramat DKR02.1-W200Z-BE12-01-FW MNR: R911273637 AC valdiklis SN:261355-00741, prekė naudota tik trumpam testavimui, naudota, su minimaliais naudojimo pėdsakais, 100% veikianti, pristatymo komplektacija pagal nuotraukas. DĖMESIO: Dėl pakavimo ir transportavimo išlaidų teiraukitės atskirai! Kjdpfx Abex Dw Evskonf

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 250 h, Funkcionalumas: visiškai funkcionalus, Tig suvirinimo/danga dengimo staklės, CNC valdymas, automatinis valdymas, 5 ašių sinchroninis judėjimas. Fronius įrenginiai, stalas nuo 1,5 metro, vertikalus ir horizontalus. Iš anksto nustatoma programuojama, lengvai valdoma valdymo skydelis. Draugiška sąsaja. Perdengimo suvirinimas rutuliams, vožtuvams, flanšų paviršiams, RTJ grioviui, nuožulniems kraštams ir kt. Vieno mygtuko sprendimai, daugiau suvirinimo galimybių, naujos atsargos pardavimui!! Knedpfxsvl Ewms Abkjf

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 80796, Machine is in a perfect condition, fully operational, needs to be dismantled on site in Vilnius, Lithuania. Seller offers dismantling, loading on the truck as well as delivery. Knedpfxjvddple Abkof

Sąlyga: labai geros būklės (naudotas), Profesionalus priekinis frezeris iš garsaus gamintojo GARANT (Hoffmann Group), skirtas našiam apdirbimui. Bendras skersmuo: 210 mm Tvirtinimo anga: 60 mm Su keičiamosiomis plokštelėmis – lengvas naudojimas, tinka darbui sunkiomis pramoninėmis sąlygomis. Labai gera būklė, įrankis paruoštas naudoti. Puikus pasirinkimas apdirbimo centrams ir pramoninėms frezavimo staklėms. Kjdpfx Aow Sav Uebkjnf

Sąlyga: labai geros būklės (naudotas), CATALOGUE NO. 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Maximum cutting height: 200 mm Maximum saw blade diameter: - upper shaft: 340 mm - lower shaft: 300 mm - blade bore diameter: 80 mm From above: - ejectors - 2 feed pressure slip shafts - pressure roller - saw shaft 37 kW - 2 smooth feed slip shafts From below: - infeed table + guide bar - ejectors - track - saw shaft 37 kW - track - 1 outfeed smooth slip shaft Knjdokyr H Aopfx Abkof - pneumatically pressed rollers - max saw blade diameter 300 mm - electric raising/lowering of upper body 1.1 kW - automatic central lubrication system - electrically controlled variable feed speed adjustment 3 kW - extraction port diameter: 230 mm, 250 mm - dimensions (L/W/H): 3000 x 2300 x 1900 mm - weight approx. 4500 kg FEATURES – Italian manufacturing – double-shaft – used multi-blade saw, very good condition Net price: 168,900 PLN Net price: 40,200 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in the case of significant exchange rate fluctuations)

Sąlyga: geras (naudotas), Included in the scope of delivery: Knedpfx Abjipuggjkef 01x bracket for push-through safety device, used Material finish: sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimensions: approx. 52 x 32 mm for rectangular tube: 50 x 30 mm Weight per piece: 0.930 kg

Sąlyga: naujas, Gamybos metai: 2025, PROFESSIONELLER DRAHTVORSCHUB MIT AC-SERVOMOTOR FÜR LASER- UND TIG-SCHWEISSEN Citronix professioneller Drahtvorschub mit Servotechnologie – bedeutet, dass er einen AC-Servomotor für den Antrieb verwendet. Dadurch wird nicht nur ein äußerst präziser Drahtvorschub selbst bei niedrigen Geschwindigkeiten ermöglicht, sondern auch die Möglichkeit, die Rückzugsstrecke des Drahtes in „mm“ einzustellen. Nachdem das Material abgekühlt ist, kann der Draht erneut vorgeschoben werden (kleinste Schrittweite 0,1 mm). Gerade beim Laserschweißen ist dies ein entscheidender Vorteil gegenüber Drahtvorschüben aus Fernost. Dort wird das Rückziehen und Vorschieben des Drahtes lediglich zeitgesteuert, was dazu führt, dass die Spitze des Schweißdrahtes nie exakt an die Stelle zurückkehrt, wo der Rückzug begonnen hat. Der Citronix-Drahtvorschub wurde so entwickelt, dass nicht nur der Drahtvorschub selbst geregelt werden kann, sondern zusätzlich auch sowohl die Laserquelle als auch das Gas-Magnetventil ein- und ausgeschaltet werden können. Dies ist ein weiterer wichtiger Unterschied und Vorteil gegenüber anderen Herstellern, da bei Laserschweißgeräten in der Regel keine Punktschweißtechnologie integriert ist. Wer also Bleche im Punktschweißverfahren fügen möchte, kann die Punktzeit einstellen und der Drahtvorschub steuert dann die Laserquelle. Der Drahtvorschub bietet vier Betriebsarten: 1. Kontinuierliches Schweißen mit Drahtvorschub 2. Kontinuierliches Schweißen ohne Drahtvorschub 3. Punktschweißen ohne Drahtvorschub Der Drahtvorschub verfügt über 200 Speicherslots: Sind die Parameter einmal festgelegt, können sie abgespeichert und im Klartext beliebig benannt werden, um die Bedienung zu erleichtern. Außerdem haben wir ein Fußpedal entwickelt, das an den Drahtvorschub angeschlossen werden kann und die Vorschubgeschwindigkeit regelt. Es funktioniert analog zum Gaspedal eines Fahrzeugs: Wenn Sie beispielsweise am Display eine Maximalgeschwindigkeit von 10 Metern pro Minute einstellen und das Pedal ganz durchtreten, beträgt die Geschwindigkeit 10 Meter pro Minute. Wird das Pedal halb gedrückt, liegt die Geschwindigkeit entsprechend bei der Hälfte. Dies ist besonders sinnvoll, wenn der Bediener an einem festen Platz arbeitet, beispielsweise im Sitzen. Sollte dieses Pedal nicht benötigt werden, kann der Drahtvorschub so in das System eingebunden werden, dass der Schweißprozess über einen Taster am Brenner gestartet und gestoppt wird. Das Fußpedal ist optional und kostet bei Bestellung zusätzlich 400 EUR. Sehen Sie sich die Monitor-Bilder an und entdecken Sie die vielfältigen einstellbaren Funktionen und Parameter. Der Citronix-Drahtvorschub ist sowohl für das Laserschweißen als auch für das TIG-Schweißen (WIG) einsetzbar. Wir haben einen Filter integriert, um HF-Funken zu vermeiden. Verarbeitbare Drahtdurchmesser liegen zwischen 0,8 und 2,4 mm. Das Menü ist aktuell in den Sprachen Englisch, Deutsch, Ungarisch und Serbisch verfügbar. In unserem Angebot finden Sie zahlreiche eigens entwickelte Schweißgeräte: Alle sind software- und digitalbasierte MIG MAG, MIG PULS SYNERGIC Schweißmaschinen (auch für Roboterschweißen mit Touchscreen-Monitor), TIG AC/DC-Geräte mit Touchscreen und digitale Plasmaschneider, Elektronik zur Steuerung von Hochdruckwasserstrahlpumpen, Sanddosierer für Wasserstrahlschneiden, Spannungs-THC mit Touchscreen... Ksdpfx Abemk S Slskonf Wir sind zudem sehr engagiert in Innovation und Entwicklung. Werfen Sie einen Blick auf unsere weiteren Produkte. Sollten Sie

Gamybos metai: 2023, veikimo valandos: 20 h, Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, bendras svoris: 60 kg, įėjimo įtampa: 220 V, lazerio galia: 200 W, įvesties srovės tipas: Oro kondicionierius, pavaros tipas: elektrinis, Techniniai parametrai: Lazeris: impulsinis lazeris Lazerio galia: 200 W Oras aušinimas Matmenys: 60 cm x 28 cm x 75 cm (ilgis x plotis x aukštis) – idealiai tinka savarankiškam transportavimui! Pardavimo kaina įskaitant demonstraciją, apmokymą ir papildomą aptarnavimą pagal poreikį - Prieinama iš karto - Garantija Nėra pardavimo prekybininkams, parduodama dėl naujos įrangos įsigijimo! NAUJA KAINA: 31 500,00 EUR be PVM DERYBINĖ KAINA: 18 000,00 EUR be PVM! Galimas finansavimas iki 6 metų! Knjdpoxcf D Djfx Abkef

Sąlyga: naujas, Gamybos metai: 2022, 57 linear meters of wide-span shelving, 80 cm deep – workshop shelving, warehouse shelving, large compartment shelving, manual storage, shelf units, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 57 linear meters Shelving offer consists of: - 031 x frames, approx. 200 x 80 cm, disassembled - 240 x beams, approx. 185 cm - 120 x shelf panels, approx. 184.5 x 79.5 cm - 240 x crossbars/load distributors - Incl. safety pins - Model: BLT, Type WR20/80 - Capacity: 400 kg per shelf (evenly distributed load) - Levels: 4 storage levels - Chipboard shelves, natural finish - Uprights painted blue - Crossbars galvanized - Brand new, available from stock - Other quantities available! Optional: Pre-assembly of frames can be provided by us for a small surcharge of €6/net per unit. -- AVAILABLE FOR IMMEDIATE DELIVERY, MULTIPLE UNITS IN STOCK -- Price: €7,267.00 net Knodpjx Ichmefx Abkof plus applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery available on request via our partner freight carrier. Shipping costs depend on postal code. Assembly: Our trained staff are happy to assist with the professional assembly and disassembly of your equipment if needed. Our recommendation: Let us know your requirements... We will gladly support you in realizing your projects, from planning and ordering through to installation.

Sąlyga: labai geros būklės (naudotas), Parduodama tvirta montavimo plokštė/mašininis stalas su T formos grioveliais. Pagaminta iš storasienės plieninės konstrukcijos, nudažyta mėlynai. Puikus pagrindas didelių dalių, įrangos montavimui arba matavimo ir apdirbimo darbams. • Matmenys: 2570 x 770 x 200 mm • Paviršius su T formos grioveliais Knedjw Rdtuopfx Abkjf • Tiksliai apdirbtas viršutinis sluoksnis • Masė: 900 kg • Galimas transportavimas arba pakrovimas krautuvu

Gamybos metai: 2020, Sąlyga: naujas, We offer you here a new shelf connector from the manufacturer Nedcon NS for sale. The scope of delivery includes: Knsdpfxef S Iq To Abksf 01x SET Spacer NR new Length: 200 mm Material finish: Sendzimir galvanized comprising: 01x Spacer NR L=200, Sendzimir galvanized 02x Hexagon bolt 8.8 M10x25, galvanized 02x Serrated flange nut hexagon 8.8 M10, galvanized 04x Hexagon bolts M10, galvanized

Sąlyga: naujas, Gamybos metai: 2022, 57 running meters wide-span shelving, 60 cm deep—workshop shelving, warehouse shelving, large compartment shelving, manual storage, shelf shelving, small-parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 57 running meters Shelving offer comprises: - 31 x frames approx. 200 x 60 cm, disassembled - 240 x beams approx. 185 cm - 120 x shelf panels approx. 184.5 x 59.5 cm - Including locking pins - Model: BLT, Type WR20/60 Ksdpfjx Icg Nsx Abkonf - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Chipboard, natural finish - Uprights blue - New stock, available ex warehouse - Other quantities available Pre-assembly of the frames can be carried out by us for a small surcharge of €6/net per frame. -- IMMEDIATELY AVAILABLE IN MULTIPLE UNITS -- Price: €5,885.00 net Plus statutory VAT. You will receive an invoice showing VAT separately. Transport: Delivery on request by our partner freight forwarder, costs depend on postal code. Assembly: Our trained personnel are at your disposal for professional assembly and disassembly of your warehouse equipment, if required. Our recommendation: Let us know your requirements... We are happy to assist you in implementing your projects—from planning and ordering right through to assembly.

Sąlyga: geras (naudotas), Included in the scope of delivery: 01x shelf connector, used Material colour: orange Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 100 mm For rack spacing: approx. 200 mm Head plate dimensions: 128 x 90 mm Profile dimensions: C 46 x 23 mm Weight: approx. 1.2 kg | each General information about the item: Knjdpfx Aei Hph Ssbksf This item is only available for collection. If transport or shipping is required, additional costs will apply, which can be requested from us separately depending on the delivery location or scope of delivery.

Sąlyga: naujas, Gamybos metai: 2022, 13.35 linear metres long-span shelving, 80 cm deep – workshop shelving, storage shelving, wide-span shelving, manual warehouses, shelving units, small parts storage. Specifications: - Height: approx. 200 cm - Depth: approx. 80 cm - Length: approx. 13.35 linear metres Shelving offer consists of: - 8 x uprights approx. 200 x 80 cm, disassembled - 56 x beams approx. 185 cm - 28 x shelf panels approx. 184.5 x 79.5 cm - 56 x support rails/load distributors - Includes safety pins - Model: BLT, Type WR20/80 - Load capacity: 400 kg per shelf, with evenly distributed load - Levels: 4 storage levels - Chipboard panels, natural finish - Uprights blue - Support rails galvanized - New stock, available ex-warehouse - Other quantities available! Knsdpox Icgpofx Abkof The pre-assembly of uprights can be carried out for a small surcharge of €6/net per piece. -- IMMEDIATELY AVAILABLE IN MULTIPLE QUANTITIES -- Price: €1,724.00 net plus statutory VAT You will receive an invoice showing VAT. Transport: Delivery available on request via our partner shipping company, costs depend on the postal code. Assembly: Our trained personnel are happy to assist with the professional assembly and disassembly of your workplace equipment as needed. Our recommendation: Let us know your requirements... We are happy to support you in bringing your projects to fruition—from planning and ordering to assembly.

Sąlyga: geras (naudotas), Included in the scope of delivery: 01x shelf connector, used Material colour: blue Knsdek Iuhfspfx Abkjf Manufacturer: Feralco for rack spacing: approx. 200 mm Total length: approx. 200 mm Profile dimensions: approx. 20 x 20 mm Head plate: approx. 100 x 40 x 4 mm Drill hole Ø: approx. 9 mm (2 pcs. per side) Weight: approx. 0.41 kg | each

Sąlyga: naujas, Gamybos metai: 2022, 28.85 linear meters wide-span shelving, 60 cm deep Specifications: - Height: approx. 200 cm - Depth: approx. 60 cm - Length: approx. 28.85 linear meters Shelving offer includes: - 16 x frames, approx. 200 x 60 cm, disassembled - 90 x beams, approx. 185 cm - 45 x chipboard shelves, approx. 184.5 x 59.5 cm - Includes safety pins - Model: BLT, Type WR20/60 - Load capacity: 400 kg per shelf level, with evenly distributed load - Levels: 3 storage levels - Chipboard, natural finish - Uprights painted blue Knjdpfx Aox Icf Sobkef - Brand new, in stock - Other quantities available! Frame pre-assembly can be carried out by us for a small additional charge of €6 net per frame. Delivery available on request at an attractive rate. -- AVAILABLE FOR IMMEDIATE DELIVERY, MULTIPLE SETS IN STOCK -- Price: €2,360.00 net Plus applicable statutory VAT. An invoice with VAT shown will be provided. Transport: Delivery is carried out by our partner freight forwarder if desired, with costs depending on postal code. Assembly: Our trained staff are available to professionally assemble and disassemble your industrial equipment if required. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects, from planning and ordering through to assembly.

Sąlyga: geras (naudotas), Technical Data for Shelf Connector: Kedpoipugrofx Abkjnf Shelving system: SLP Scope of delivery includes: 01x Shelf connector, used Material color: blue Total length: approx. 200 mm Head plates: approx. 95 x 41 mm L-profile: approx. 31 x 31 mm

Sąlyga: geras (naudotas), Included in the scope of delivery: 01x U-shaped collision protection corner, used Material color: orange Total height: approx. 350 mm Knedpfx Ask T Au Eebkof Total width: approx. 200 mm Internal width: approx. 160 mm Total depth: approx. 360 mm Internal depth: approx. 240 mm Leg dimensions: approx. 140 x 140 mm Base plate dimensions: approx. 340 x 200 x 8 mm Material thickness: approx. 6.00 mm Bore hole diameter: approx. 16 mm Number of bore holes: 4 pcs. Weight / piece: approx. 14.850 kg General information about the item: This item is only offered for pickup. Any transportation or shipping that may be required is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.