Kampas Gręžimo pirkti naudotą (5 463)

Būklė: naudotas, High-Performance Drilling Machine ALZMETALL Type Abomat 20 Production Drilling Machine Serial No.: 452 Year of Manufacture: 1996 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Hsdeikrtqopfx Af Ujl Arm length: 280 mm Drill slide stroke: 500 mm Distance spindle nose to table: 185 - 685 mm Table size: 490 x 400 mm Spindle speed: 50 - 500 rpm, stepless Drill slide feed: 20 - 224 mm/min, stepless Drill slide rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.1 kW (speed: 1000 rpm) Power supply: 400 V, 50 Hz - Stepless spindle speed via frequency converter - Stepless drill slide feed via frequency converter - 2 operating modes: setup and automatic - Centralized lubrication - Control cabinet at the rear of the machine - Swivelling control panel - Mounted on steel plate (700 x 650 x 40 mm) with precision height adjustment Space requirement (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 1000 kg Good condition

Būklė: naudotas, High-Performance Drill Press ALZMETALL Type Abomat 20 Production Drill Press Serial No. 449 Year of manufacture: 1995 Drilling capacity in steel ST 60: 25 mm Drilling capacity in cast iron GG 20: 30 mm Spindle taper: SK 40 - M16 Throat depth: 280 mm Quill stroke: 500 mm Max. spindle distance: 685 mm Min. spindle distance: 185 mm Table size: 490 x 400 mm Spindle speed: 2000 rpm Automatic feed: 224 mm/min Rapid traverse: 4.5 m/min Feed motor power: 0.18 kW Rapid traverse motor power: 0.75 kW Drill spindle motor power: 1.5 kW Hodpfx Asgd Ipkef Uol Power supply: 400 Volt, 50 Hz - Production drilling machine with single spindle speed and feed rate - Current spindle speed: 2000 rpm - Current feed rate: 224 mm/min - Two operation modes: manual and automatic - Electrically adjustable drill head height - Central lubrication - Control cabinet mounted at rear of machine - Mounted on steel plate (700 x 650 x 40 mm) with precise height adjustment Required space (L x W x H): 1200 x 700 x 2530 mm Weight: approx. 900 kg Good condition

Būklė: naudotas, Gamybos metai: 1999, veikimo valandos: 3 400 h, mašinos/transporto priemonės numeris: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: reading - Borehole diameter: max. 385 mm - Maximum torque: 2,500 kN - Pulling force: 96 kN - Thrust force: 65 kN - Maximum drilling length: 250 m - Power: 90 kW - Drill rods and bits included - Complete equipment with separate engine, hydraulic unit, and drilling fluid tank - Perkins engine 119 kW / 162 HP This offer is non-binding; errors and omissions excepted. Only the specific agreements in the order confirmation or purchase contract are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC), which are available at any time on our website or upon request. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Further information Hsdpfxehd I S Uj Af Uol Intended use: Construction/Engineering

Būklė: naujas, Gamybos metai: 2006, Gręžimo pajėgumas pliene (skersmuo): 35 mm Išsikišimas: 280 mm Gręžimo eiga: 150 mm Veleno tvirtinimas: MK 4 Stalo dydis: 550 x 400 mm Veleno apsukos – be pakopų: 80–2 800 aps./min Padavimo intervalas – gręžimo galvai: 0,1 / 0,2 / 0,3 mm/aps. Darbinė įtampa: 400 V Hjdpfoy Ehwzsx Af Uol Bendra galios poreikis: 1,3 / 2,3 kW Staklių svoris apie: 365 kg Užimama vieta (aukštis): apie 2,05 m - Gamyklinis Nr.: 186367

Būklė: naudotas, Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Gręžimo našumas pliene (skersmuo) 80 mm Ištisinis nuotolis 2000 mm Rušinio aukštis – apie 1300 mm Hodpjy H Daujfx Af Uol Praplatinimo skersmuo pliene 100 mm Praplatinimo skersmuo ketaus 115 mm Sriegimas ST 60 M 68 mm Velena sukimosi greičiai 16 - 1250 aps./min Velena greičių skaičius 32 Velena eiga 550 mm Padavimų skaičius 18 Padavimas 0,06 - 3,0 mm/aps. Atstumas vėlena/pagrindo plokštė 480 iki 1800 mm Kolonos skersmuo 500 mm Velena variklis 11 kW Kėlimo variklis 4 kW Bendra galia 15 kW Staklių svoris apie 8500 kg Paviršius 3200 x 1250 x 3600 mm su darbiniu stalu 1500 x 1000 x 500 mm

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 200 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 200 mm, veleno greitis (maks.): 12 000 aps./min, bendras ilgis: 9 300 mm, bendras aukštis: 4 300 mm, stalo plotis: 1 250 mm, bendras plotis: 6 900 mm, stalo ilgis: 1 250 mm, bendras svoris: 50 000 kg, 5-Axis Bed-Type Milling Machine AX5 TLF, 2009, Heidenhain iTNC530, Rotary Table, HSK-A100 Offer Description: For sale: AX5 TLF bed-type 5-axis milling machine, year 2009, equipped with an integrated rotary table and fully programmable axes. The machine is designed for high-precision multi-axis machining, including complex workpieces requiring simultaneous 5-axis operation. The configuration features a swivelling head and rotary table, providing extensive technological capabilities for machining large-sized components. The machine comes fitted with a Heidenhain iTNC530i CNC control, a spindle with HSK-A100 tool interface, and through-spindle coolant. Additional features include a Renishaw touch probe and a 30-position tool magazine. For further details, photos, sales conditions, or to arrange an inspection, please contact us. Technical Specification: Model: AX5 TLF Hsdpoyzfb Nofx Af Uol Type: 5-axis bed-type milling machine Year of manufacture: 2009 Travel ranges: X axis: 3200 mm Y axis: 1200 mm Z axis: 1200 mm B axis (swivelling head): ±95° C axis (rotary table): 360° Rotary table: Diameter: 1250 mm Spindle: Taper: HSK-A 100 Max spindle speed: 12,000 rpm Through-spindle coolant Control: Heidenhain iTNC530i Additional equipment: Renishaw touch probe Tool magazine: 30 positions Machine dimensions: Length: 9300 mm Width: 6900 mm Height: 4300 mm Weight: 50,000 kg

Būklė: nepatikrintas (naudotas), Gamybos metai: 1987, mašinos/transporto priemonės numeris: 5755, Funkcionalumas: nepatikrintas, gręžimo gylis: 120 mm, sukimosi greitis (maks.): 1 125 aps./min, sukimosi greitis (min.): 160 aps./min, stalo plotis: 300 mm, stalo ilgis: 300 mm, Nėra minimalios kainos – garantuotas pardavimas aukščiausią kainą pasiūliusiam! Hedpfxoy D Sydo Af Uel Pasiūlymo pateikimas įpareigoja laiku atsiimti įrenginį nuo 2026-06-23 iki 2026-06-26! TECHNINĖ INFORMACIJA Apsisukimų diapazonas: 160–1.125 aps./min Gręžimo gylis: iki 120 mm Stalo matmenys: 300 x 300 mm ĮRANGOS INFORMACIJA Matmenys ir svoris Matmenys (I x P x A): 1.000 x 500 x 1.800 mm Įrangos svoris: 250 kg PRIEDAI Spaustuvai Išorinė nuoroda: 18

Būklė: geras (naudotas), Gamybos metai: 1995, Valdymas: HEIDENHAIN TNC 415 B Hodjw Uin Sopfx Af Ujl Eigos diapazonas: X= 600, Y= 400, Z= 420 mm Sūkiai: 20 – 4000 aps./min Pavarų pakopos: 3 Tvirtinimas: SK 40 Pinolės eiga: 75 mm Veleno variklis: 5,9 kW Paleidimo greitis: 1 – 5000/6000 mm/min (rankinis/programinis) Greita eiga x, y: 7 m/min Greita eiga z: 6 m/min Tvirtinimo paviršius: 900 x 458 mm Svoris: apie 2300 kg Su aušinimo įranga, elektrine rankenėle, įvairiais įrankiais (be spintelės)

Būklė: naudotas, Gamybos metai: 2003, Gręžimo našumas pliene St 60 40 mm Gręžimo našumas ketaus 46 mm Gręžimo galimybės St 60 50 mm Sriegimas pliene St 60 M 30 Sriegimas GG 20 M36 Trumpas velenas MK 4 Išsikišimas 300 mm Staklių stalas – naud. plotas 615x430 mm Veleno apsukos 200-3000 sūk./min. T-formos grioveliai, kiekis - plotis - atstumas 2x14x224 mm Atstumas tarp veleno/stalo maks. 147/688 mm Kolonos skersmuo 145 mm Veleno eiga 160 mm Pasiūlos 0,1-0,4 mm/aps. Staklių aukštis 1885 mm Variklio galia 1,8/2,9 kW Staklių svoris apie 500 kg - Aušinimo skysčio siurblys - Elektrinis padavimas - Elektroninis apsukų reguliavimas - Staklių apšvietimas Hsdpey Ehx Sofx Af Uol - Sukimas į dešinę ir kairę

Būklė: naudotas, Gręžimo pajėgumas pliene St 60: 18 mm Gręžimo galimybės pliene St 60: 23 mm Veleno kūgis MK 2 Gręžimo gylis: 100 mm Išsikišimas: 240 mm Kolonos skersmuo: 82 mm Hsdpfeyv N N Tjx Af Uel Staklių stalas – naudingoji aikštelė: 340x280 mm T formos griovelių skaičius – plotis – atstumas: 2 x 13 x 125 mm Veleno greitis: 125-2 000 aps./min Atstumas tarp veleno ir staklių stalo min./maks.: 160–880 mm Bendras galingumo poreikis: 0,45/0,8 kW Staklių svoris: apie 205 kg Užimamas plotas apie 765x510x1850 mm

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 580 mm, padavimo eiga Y ašimi: 200 mm, padavimo ilgis Z ašis: 130 mm, X ašies eiga: 580 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 130 mm, veleno greitis (maks.): 3 200 aps./min, veleno greitis (min.): 100 aps./min, veleno tvirtinimas: MK 4, gerklės gylis: 286 mm, quill skersmuo: 130 mm, šilko eigos atstumas: 130 mm, įvesties srovės tipas: trifazis, bendras ilgis: 860 mm, bendras aukštis: 1 200 mm, stalo plotis: 240 mm, įėjimo įtampa: 400 V, bendras plotis: 740 mm, stalo ilgis: 800 mm, gręžimo pajėgumas: 45 mm, frezos galvos padėtis: ±90°, gręžimo gylis: 130 mm, ruošinio svoris (maks.): 375 kg, atstumas nuo stalo iki veleno centro: 450 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Drilling and Milling Machine ZX7045B VARIO – Professional Metalworking Machine Hedpfjyvh Hqex Af Uel The ZX7045B VARIO drilling and milling machine is a robust and versatile solution for professional metalworking in workshops, manufacturing facilities, and toolmaking departments. This machine supports drilling, milling, and thread cutting, making it a universal tool for a wide range of machining tasks. Equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm, the machine ensures high precision thanks to the spindle supported in precision bearings. The oil-bath gear transmission guarantees durable and quiet operation. The head is height-adjustable and can swivel ±45°, allowing machining at various angles. Automatic spindle feed and auto-reverse function during thread cutting significantly simplify handling. The large working table (800 × 240 mm) with T-slots provides stable workpiece clamping. The heavy-duty design and rigid machine bed ensure high stability during operation. The unit is also equipped with a coolant system and an emergency stop switch. Technical Data Parameter Value Model ZX7045B VARIO Max. drilling capacity 45 mm Max. face mill diameter 80 mm Max. end mill diameter 32 mm Max. thread cutting M12 Spindle taper MT4 Spindle stroke 130 mm Spindle speed 100–3200 rpm Speed adjustment stepless Max. spindle–table distance 450 mm Spindle axis–column distance 286 mm Table travel X 580 mm Table travel Y 200 mm Table size 800 × 240 mm Head ±45° swivelable Motor power 2.2 kW Power supply 400 V Machine dimensions 860 × 740 × 1200 mm Weight 375 kg Delivery to customer possible. Transport costs are calculated individually by the carrier. If you are interested in more machines, please visit our website.

Būklė: naudotas, Turiu 2 frezavimo stakles: Huron MU5 ir Zayer 5AM. Staklės geros būklės. Kaina nurodyta už vienetą. Abi staklės buvo išvalytos ir patikrintos. Visos staklių funkcijos veikia 100%. Hodpjxtflcjfx Af Uol

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) Hsdoxwaz Hjpfx Af Usl - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K

Būklė: naudotas, Gamybos metai: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" – complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal: clamping – drilling – releasing; electrical intermittent operation. Hjdpfxjxnlflj Af Uel - Automatic retraction of the drilling unit upon reaching the preset drilling depth. - Automatic extension of drilling depth for face-end drilling. This eliminates the need to manually adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, drilling depth flat face 14 mm, drilling depth end face 24 mm). - 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drilling feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping carriage adjustable along the Y-axis, with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal positioning system comprising: - 1 positioning rail, 1800 mm, for shelf drilling (aluminum profile 40 x 40 mm) with 3 flip stops - With quick-change system, easily convertible from right to left for mirrored shelf drilling in carcass construction. Also suitable for line boring in System 32. - Side stops and position settings, as well as the drilling height adjustment over the support table, using mechanical digital counters. - Side stops are easily swung out for the shortest possible changeover times between carcass, frame, and line boring operations. - Clamping arms for the clamping carriage are designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drill bits: - 5 tungsten carbide dowel drill bits, Ø 8 x 77 mm, right-hand - 4 tungsten carbide dowel drill bits, Ø 8 x 77 mm, left-hand Base machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" as above. Additional features: - Suction funnel, dust-tested, Ø 120 mm - 1 set for line boring in system

Būklė: naudotas, Used machine Pre-owned line boring machine Ganner Compact 30 Features and technical data: - 2 drilling beams, each with 15 spindles - 32 mm pitch - Drilling unit position adjustment: 0 - 650 mm - Minimum distance between hole rows: 190 mm - Spindle speed: 2800 rpm - Motor power: 2 x 0.75 kW - Maximum clamping height for workpieces: 70 mm - Working height: 850 mm - Compressed air connection: 6 bar Availability: by agreement Hodpfxswhuh So Af Uol Location: Solingen

Gamybos metai: 2009, būklė: naudotas, mašinos/transporto priemonės numeris: 16-TS5-6, 0 kVA, HEIDENHAIN valdymas, T formos griovelių prispaudimo stalas apie 2000x2500 mm, 60 pozicijų įrankių keitiklis AITEK H-60, drožlių transporteris, hidraulinis agregatas, pramoninis aušintuvas, juostinis filtras, 3 adapteriai, apsauginis gaubtas Hodpjy D Ty Ejfx Af Uel

Būklė: geras (naudotas), Nagel Citoborma 280B popieriaus gręžtuvas Šis įrenginys yra visiškai veikiantis. Tai vienas naujausių modelių. Gręžimo stalas reguliuojamas visomis kryptimis (šonai, priekinė / galinė kryptis). Yra stoveliai skylių atstumui nustatyti. Įrengtas stalas yra padidintos versijos. Be to, popieriaus gręžtuvas turi automatinį stalo užraktą, kuris atsirakina po kiekvieno ciklo. Puikios būklės. Hsdpsyrz S Rjfx Af Usl Tvirta konstrukcija – svoris 76 kg. Maitinimas 380 V. Du gręžimo galvutės su reguliuojamu atstumu nuo 45 iki 120 mm. Gręžimo diametras: 2–20 mm. Sluoksnio aukštis: 60 mm. Įrenginys buvo aptarnautas. Komplektuojama su grąžtais ir įrankiais, nauja pjovimo juostele ir naudojimo instrukcija.

Būklė: geras (naudotas), Stago PB 2015 popieriaus gręžimo staklės Hsdpfjyrz Swsx Af Uol Tai naujausias Stago gręžtuvas, kilęs iš didelės įmonės biuro. Įrenginys visiškai veikiantis. Gręžimo stalą galima reguliuoti visomis kryptimis (šonuose, priekyje/gale). Yra atmušos gręžimo atstumui nustatyti. Įstatytas stalas yra padidintos versijos. Be to, gręžtuvas turi automatinį stalo užraktą. Tvirta konstrukcija – svoris apie 70 kg. Maitinimas: 230V Dvi gręžimo galvos. Gręžtuvo skersmuo: 2–10 mm. Griebiamos popieriaus krūvos aukštis: 60 mm. Galima reguliuoti atstumą tarp gręžimo galvų. Gręžtuvas buvo aptarnautas. Komplekte – grąžtai ir įrankiai.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, BFT 90/5-2 CNC SINUMERIK 840D/840DE Technical Main Data Spindle diameter: 102 mm Tool holder: ISO 50 Operating manual (see photo) Machine Type: Table-type boring mill Make: UNION KARL MARX STADT Model: BFT 90/5-2 Year of manufacture: 1989 Control system: CNC Country of origin: Germany Hodpfx Ajy Aiaref Ujl Shipping terms: ex location Rostock, loaded free of charge, unpacked Location: Rostock Availability: immediately Price: on request Technical Details Spindle diameter: 102 mm X-axis travel: 1600 mm Y-axis travel: 1210 mm Z-axis travel: 980 mm B-axis (table): 360° mm Drilling depth: 710 mm (W-axis) W-axis (spindle longitudinal): 710 mm Table load capacity: 2.5 / 3.0 t CNC control for programming: Numeric CNC Table size: 1000 x 1120 mm Feed rates x/y/z/w: 1 - 3180 mm/min Tool holder: ISO 50 Rapid traverse x/y/z: 4000 mm/min Rapid traverse w: 3150 mm/min Spindle speed max.: 4 - 1600 rpm Total power requirement: 27 kW Machine weight approx.: 9700 kg Control cabinet dimensions (LxWxH): 2500 x 650 x 2200 mm Machine dimensions (LxWxH): 5.2 x 3.3 x 2.8 m Additional information Other features: - Thread cutting possible via Z-axis - Coolant system with pump - Hydraulic power unit

Būklė: naujas, Stalinis gręžimo staklės Hedpob Hl Irjfx Af Uel Gamintojas: MAXION Modelis: UNIMAX 3 Būklė: naujas įrenginys Špindelio greitis (be pakopų): A diapazonas: 80 – 1.440 aps./min B diapazonas: 180 – 3.200 aps./min Standartinė gręžimo galia: 30 mm Standartinė komplektacija: - Pilna variklio apsauga - Jungiklis dešinės/kairės sukimosi kryptims - Skaitmeninis sūkių dažnio indikatorius - Stalo reguliavimas per krumpliastiebį - Grąžto apsauga - Avarinio stabdymo mygtukas - Naudojimo instrukcija

Būklė: geras (naudotas), Gamintojas: Bulgarija Pagaminimo metai: 1979 Mašinos numeris: 8499 Tipas / Modelis: PK 203 Gręžimo galia plienui: 25 / 30 mm Veleno tvirtinimas: MK 3 Sukimosi greitis: 95–2 000 aps./min Padvėjimas: 0,08–0,32 mm/aps. Hsdpfjy E Hahox Af Uel Atstumas nuo kolonos: 280 mm Stalas: 410 x 440 mm Spaudimo paviršius: 320 x 345 mm Pagrindo paviršius: 510 x 760 mm Eiga: 160 mm Bendra galia: 1,1 kW Priedai/Įranga: Būklė: gera Svoris: 0,5 t Matmenys: 550 x 1 000 x 1 900 mm

Būklė: naudotas, Gamybos metai: 1980, Veleno skersmuo 135 mm x eiga 950 mm Hjdpfey Ehwhex Af Ujl Stovo plotis 1100 mm y eiga 700 mm Skersinio balkio reguliavimas - vertikaliai 780 mm Pinolės eiga 300 mm Didžiausias atstumas tarp darbo stalo ir veleno galo 1000 mm Stalo laikymo paviršius 1100x842 mm Stalo apkrova 1500 kg Sukimosi greičiai 40-2000 aps./min Reguliavimo greitis 5-1500 mm/min Elektrinė versija – Įtampa/Dažnis 380/50 V/Hz Bendras galios poreikis 8 kW Staklių svoris apie 9,5 t Užimamas plotas apie 3,3x2,34x2,8 m Heidenhain ND 780 Pasukamas apvalusis stalas PI-5 Įrankiai Nustatymo įrenginiai

Būklė: naudotas, rida: 1 km, galia: 187 kW (254,25 AG), ašių konfigūracija: 4x4, pavaros tipas: automatinis, Gamybos metai: 2013, GVW: 44,400 kg For more information, please contact Emal Jaweed. Drilling rig, ABI / Delmag, Type: RH 12, Year of manufacture: 2013, Operating hours: 12,035, kW / HP: 187 / 254, Transport length: 11,030 mm, Transport width: 2,550 mm, Operating weight: 43,200 - 44,400 kg, Transport weight: 29,850 - 42,400 kg, Operating pressure: 33 MPa, Pulling force: 160 kN, Track width: 2,250 - 3,700 mm. Features: radio, automatic climate control, seat heating, central lubrication system. Kelly bar: EMDE K298/3-12SD, Year of manufacture: 2020. Other details: * We offer more than 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. Hedoy Iadrspfx Af Ujl * Financing and leasing available. * Specialist for worldwide transport and shipping. * No liability for typographical or printing errors. * Subject to prior sale and errors. * Trade-ins possible! * Only the General Terms and Conditions of Jaweed GmbH apply to the purchase of vehicles or used machinery. * Further information and our General Terms and Conditions can be found on our website.

Būklė: geras (naudotas), Technical data: Travel paths: longitudinal X-axis 762 mm cross Y-axis 305 mm Hsdpew Ebhmsfx Af Uol vertical Z-axis 406 mm Quill travel 127 mm Spindle mount: Collet Table size: 1067 x 229 mm Speed range: 50–3750 rpm, two stages Weight: 1000 kg Equipment: - SONY digital readout, 2 axes (X and Y axes) - Machine lamp - Drill chuck 0–13 mm - Collet chuck set - Machine vice, jaw width 150 mm - Safety device, electrically secured, type: ZE-FS 30-300, fully installed - Documentation Condition: good, workshop tested

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, STALINIS GRĘŽIMO STAKLĖS TIPAS: TB 16 Hsdpey Dp I Ejfx Af Uol GAMYBOS METAI: 1977 Techniniai duomenys: - Maks. gręžimo našumas: 16 mm - Gręžimo velenas: MK2 - Gręžimo gylis (eiga): 100 mm - Gręžimo stalas: 220 x 360 mm - Pavara: 0,75 kW/1 AG - Variklio greitis: 1400 aps./min. - Veleno greičiai: 430-680-1120-1800-2800-4500 aps./min. Įranga: - ALBRECHT greito užveržimo griebtuvas 0-13 mm - Dokumentacija