Antgalis Gręžimo pirkti naudotą (3 311)

Sąlyga: naudotas, Quills for jig boring machine, fine boring machine, floor-type boring machine, table-type boring machine, boring mill, milling machine, Gijdpfx Abefc R D Iedel -Stroke: 60 mm -Packed: in a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg

Sąlyga: geras (naudotas), Drill bit, step chisel, well drilling crown, core drill, core drilling machine, diamond drill bit, drill crown for well drilling rig - Drill bit: 3 pieces with drilling shank plus 1 extension adapter - Dimensions: see photos - Sale/price: as a complete set Giodpfsvmyrusx Abdjl - Transport dimensions: 250/250/H280 mm - Weight: 27.3 kg

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: ribota funkcionalumas, gręžimo gylis: 710 mm, sukimosi greitis (maks.): 1 250 aps./min, ašies skersmuo: 100 mm, stalo ilgis: 1 120 mm, stalo plotis: 1 250 mm, Submission of a bid obligates the buyer to collect the machine within the deadline, no later than 28.01.2026! Prompt scheduling of a pick-up appointment after the end of the auction is required, as the machine has not yet been dismantled! TECHNICAL DETAILS Spindle diameter: 100 mm Spindle taper: ISO steep taper No. 50 Boring depth in one pass: 710 mm Lowest position of spindle center above table surface: 0 mm Highest position of spindle center above table surface: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal travel of tailstock: 1,300 mm Spindle speed range: 6 – 1,250 rpm Table clamping area: 1,120 mm x 1,250 mm Longitudinal travel of table: 1,300 mm Cross travel of table: 1,200 mm 34 feeds for spindle, headstock, and table: 0.017 – mm/rev Infinitely variable feeds for headstock and table: 20 – 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Power supply: Three-phase Godpfxsx Hfugj Abdsil Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Schematics Operating manuals Note: Brake defective, clutch dismounted (included). Estimated repair costs in Germany: approx. €3,000.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1110013, X ašies eiga: 2 000 mm, Y ašies eiga: 1 600 mm, Z ašies eigos atstumas: 1 500 mm, stalo apkrova: 6 000 kg, ašies skersmuo: 110 mm, TECHNINĖ INFORMACIJA X ašies eiga: 2.000 mm Gsdpox I A D Usfx Abdsil Y ašies eiga: 1.600 mm Z ašies eiga: 1.500 mm Gręžimo veleno skersmuo: 110 mm Stalo tvirtinimo paviršius: 1.250 x 1.600 mm Stalo apkrova: 6.000 kg STAKLIŲ DUOMENYS Valdymas: Heidenhain TNC 426M Pastaba: Įrankiai, matomi nuotraukose, nėra įtraukti į pardavimo ar pristatymo apimtį.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AB/226310, bendras ilgis: 4 300 mm, bendras plotis: 1 880 mm, bendras aukštis: 2 350 mm, tuščias svoris: 1 310 kg, ĮRENGINIO DUOMENYS Gjdpfx Abox Tpv Isdsil Matmenys ir svoris Matmenys (I x P x A): 4.300 x 1.880 x 2.350 mm Tuščias svoris: 1.310 kg

Sąlyga: naudotas, rida: 217 482 km, ašių konfigūracija: 4x4, Gamybos metai: 2006, Įranga: visų varančiųjų ratų pavara, Tuščiasvoris: 16 000 kg Didžiausia apkrova: 7 800 kg Bendroji masė: 23 800 kg Gisdpfx Aox S U Iyebdol

Sąlyga: labai geros būklės (naudotas), Katalogo numeris 7829 TECHNINIAI DUOMENYS Gijdpfexzh Nyjx Abdsl - Velenų kiekis: 20 vnt. - Maksimalus įrankio skersmuo: 10 mm - Laisvas velenų išdėstymas: priekyje/gale, kairėje/dešinėje - Darbinio stalo matmenys: 530x1300 mm - Aukštis iki darbinio stalo paviršiaus: 950 mm - Darbinio stalo eiga: 100 mm - Stalo aukščio reguliavimas aukštyn/žemyn pneumatiniu ir rankiniu būdu - 3 pneumatiniai spaustuvai - Pagrindinis variklis: 3×2,2 kW - Matmenys (ilg./plotis/aukštis): 1700x1130x1600 mm - Svoris: 555 kg PRIVALUMAI – Pagaminta Lenkijoje – Laisvas velenų išdėstymas: priekyje/gale, kairėje/dešinėje – Pneumatinis stalas pakeliamas – Nedažyta – Naudota gręžimo staklė, labai gera būklė Neto kaina: 18.900 PLN Neto kaina: 4.500 EUR pagal kursą 4,2 EUR (Kainos gali keistis esant didesniems svyravimams)

Sąlyga: geras (naudotas), Nagel Citoborma 280B Papierbohrmaschine Die Maschine ist zu 100 % funktionsfähig und gehört zu den neuesten Modellen. Der Bohrtisch ist in allen Ebenen verstellbar (seitlich, vorne/hinten) und verfügt über Anschläge zur Einstellung des Bohrabstands. Der montierte Tisch ist in der vergrößerten Ausführung. Zusätzlich verfügt die Papierbohrmaschine über eine automatische Tischverriegelung, die nach jedem Bohrzyklus gelöst wird. Gedpfx Aox Tvlisbdsil Top Zustand. Robuste Bauweise – Gewicht: 76 kg. Stromversorgung: 380 V Zwei Bohrköpfe mit verstellbarem Abstand im Bereich von 45–120 mm. Bohrdurchmesser: 2–20 mm. Stapelhöhe: 60 mm. Die Maschine wurde überprüft. Zum Lieferumfang gehören Bohrer und Werkzeuge, ein neuer Bohrunterlage-Streifen sowie eine Bedienungsanleitung.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 14219, X ašies eiga: 1 250 mm, Y ašies eiga: 900 mm, Z ašies eigos atstumas: 560 mm, ašies skersmuo: 75 mm, veleno greitis (maks.): 1 800 aps./min, Su skaitmeniniu eigos rodmeniu! TECHNINĖ INFORMACIJA Gisdsx Ng Tvopfx Abdsl X ašis: 1.250 mm Y ašis: 900 mm Z ašis (arba W ašis): 560 mm Veleno skersmuo: 75 mm Veleno apsisukimai: 18–1.800 aps./min Stalo matmenys: 950 mm x 950 mm ĮRENGINIO DUOMENYS Svoris: 10.000 kg

Sąlyga: naudotas, Gamybos metai: 2001, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 526/01, įėjimo įtampa: 380 V, padavimo ilgis X ašis: 1 250 mm, įvesties srovės tipas: trifazis, Naudotas stiklo gręžimo įrenginįs su automatine liniuote. Geros būklės. Giedpsx Rp Rgsfx Abdel

Sąlyga: geras (naudotas), For sale: HILMA-ROEMHELD machine vice, in good condition. Gjdpfx Absv Upvredjil

Sąlyga: naujas, Gamybos metai: 2025, Our ZX7045 B1 milling-drilling machine is designed for drilling, tapping, reaming, boring, and enlarging holes up to 45/40 mm in cast iron, and tapping up to M12 mm. The ZX7045 B1 version is equipped as standard with an automatic spindle feed and an efficient cooling system, providing not only excellent performance but also optimal working conditions. With a milling capacity up to 80 mm in width, keyway milling up to 22 mm, as well as the ability to perform end and face milling operations, this milling-drilling machine becomes an indispensable tool for a wide range of applications. Product features: - HEAVY DUTY STABLE CAST IRON BODY - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTABLE ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - ROBUST CROSS TABLE WITH PRECISION-GROUND SURFACE - DOVETAIL GUIDES - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT ROTATION - SWIVEL HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - Machine base available as an optional accessory TECHNICAL DATA: DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT 4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORKTABLE DIMENSIONS: 820 mm x 240 mm Gijdpfjvxth Hox Abdel BASE DIMENSIONS: 580 x 600 mm MAX. DISTANCE SPINDLE TO TABLE: 445 mm DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm TRAVEL X/Y/Z: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL RANGE LEFT/RIGHT: 90° MOTOR POWER: 1.8kW / 2.5HP POWER SUPPLY: 400 V WEIGHT: 350 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1993, Katalogo numeris 7718 Gjdpfjw I R Tisx Abdoil TECHNINIAI DUOMENYS - Verpstų kiekis: 23 vnt - Galvutė paruošta įsukamiems grąžtams - Atstumas tarp kraštinių verpstų: 704 mm - Atstumas tarp verpstų: 32 mm - Pneumatiniai spaustuvai: 2 vnt - Stalo paviršiaus matmenys: 1200x850 mm - Aukštis iki stalo paviršiaus: 930 mm - Cilindro eiga: 70 mm - Maksimali gręžimo skersmuo: 12 mm - Gręžimo reguliavimas: vertikaliai/horizontaliai ir kampu - Gręžimo aparato reguliavimas: pneumatinis - Pagrindinis variklis: 2×0,75 kW - Matmenys (ilgis/plotis/aukštis): 1270x1330x1350 mm - Svoris apie 700 kg PRIVALUMAI – Pagaminta Lenkijoje – Verpstų kiekis: 23 vnt – Galvutė pritaikyta įsukamiems grąžtams – Nedažyta – DTR techninė dokumentacija – Naudotas gręžtuvas, labai gera būklė Grynoji kaina: 8 900 PLN Grynoji kaina: 2 120 EUR, pagal kursą 4,2 EUR (Kainos gali keistis esant didesniems svyravimams)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1983, veikimo valandos: 6 348 h, Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 500 mm, X ašies eiga: 1 250 mm, Y ašies eiga: 900 mm, Z ašies eigos atstumas: 900 mm, gręžimo skersmuo: 50 mm, Mašina buvo kapitališkai suremontuota 2009 m.! TECHNINĖ INFORMACIJA Gręžimo gylis: 1 500 mm Grąžto skersmuo: 5 - 50 mm X ašies eiga: 1 250 mm Y ašies eiga: 900 mm Z ašies eiga: 900 mm Stalo ilgis: 1 000 mm Stalo plotis: 1 000 mm Maks. stalo apkrova: 3 000 kg Velenu greitis: 100–6 000 aps./min. Tvirtinimas: SK 40 MAŠINOS DUOMENYS Valdymas: Siemens 802 D Gsdox Ngxrjpfx Abdjil Matmenys ir svoris Matmenys (I x P x A): 5 000 x 2 600 x 2 000 mm Svoris: 6 000 kg Darbo valandos: 6 348 h

Sąlyga: naujas, Gamybos metai: 2025, Order today the CORMAK ZX 7550 CW – a compact universal milling machine, ideal for tool rooms and maintenance departments. This exceptionally versatile machine is immediately available from stock. Discover the features that make the ZX 7550 CW stand out in the market: Machine Features Automatic Table Feed in X and Y Axes: Achieve precision and efficiency with automatic table feed in two planes. Reach excellent results effortlessly. Mechanical Table Feed in Z Axis: Innovative mechanical Z-axis feed enables quick and precise material processing. Reduce work time without compromising quality. Heavy Duty, Stable Cast Iron Frame: The robust construction ensures stability and durability. The heavy cast iron casting provides precise workmanship, translating into machining accuracy. Massive Cross Table with Precision Ground Surface: The cross table is manufactured with great attention to detail, particularly regarding the precision ground surface, guaranteeing perfectly smooth material processing. Dovetail Guides on All 3 Axes: Thanks to innovative dovetail guides on all axes, the machine achieves maximum movement precision in all three axes. Obtain exact results without compromises. Quiet Operation Thanks to Ground Gears: Work without unnecessary noise. Thanks to ground gears, the machine operates smoothly and quietly, providing a comfortable working environment. Left and Right Spindle Rotation: Adjust the operation to your needs. The machine features bidirectional spindle rotation, offering even greater flexibility in material processing. ±90° Swiveling Head: Rotate the head in any direction. With the ±90° swiveling function, the machine adapts to various projects and applications. The CORMAK ZX 7550 CW is not just a milling machine – it’s a tool that meets even the most demanding challenges. Order now and experience excellence in material processing! Technical Specifications: Max. drilling diameter: 50 mm Max. horizontal milling length: 100 mm Max. vertical milling diameter: 25 mm Max. tapping diameter: M16 Max. boring diameter: 120 mm Spindle taper: ISO 40 Spindle speed range and number (vertical, 50Hz): 115-1750 rpm (8) Spindle speed range and number (horizontal, 50Hz): 60-1350 rpm (9) Distance from spindle to column: 200-700 mm Distance from spindle to table: 100-480 mm Distance from spindle axis to table: 0-380 mm Quill travel: 120 mm Table size: 1000x240 mm Table travel: 600x230 mm Table feed: 24-720 mm/min (8 speeds) Giedpfx Aboud Icqedol Spindle feed: 0.015; 0.08; 0.25 mm/rev Number, width, and spacing of T-slots: 5 / 14 mm / 44 mm Motor power (Vertical/Horizontal): 0.85-1.5 / 1.5 kW Overall dimensions: 1120x1060x2035 mm Weight: 970 kg Equipment (depending on version): SINO 3-axis digital readout ISO 40/Morse taper reducing sleeves 1-16 mm drill chuck EC declaration of conformity 160 mm machine vise Arbor with a set of collets for end mills Horizontal spindle support / overarm Long milling arbors Basic tools 24V halogen lighting system Cooling system English user manual

Sąlyga: labai geros būklės (naudotas), KATALOGO NUMERIS 6608 TECHNINIAI DUOMENYS Gijdpsx Sq Amjfx Abdjl - velenų kiekis: 21 vnt - kraštinių velenų atstumas: 640 mm - velenų žingsnis: 32 mm - maks. gręžimo gylis: 60 mm - gręžimo plotis vertikaliai: 60 mm - gręžimo reguliavimas aukštyn/žemyn ir kampu - dešiniai-kairieji grąžtai, tvirtinami inbusais - pneumatiniai spaustuvai: 2 vnt - stalo paviršiaus matmenys: 490x1040 mm - aukštis iki stalo paviršiaus: 920 mm - pagrindinis variklis: 2,2 kW - darbinis slėgis: 6-8 bar - matmenys (ilgis/plotis/aukštis): 2830/1150/1320 mm - svoris: 442 kg - vokiška gamyba - originali DTR dokumentacija - nedažytas - mobilus Grynasis kaina: 7900 PLN Grynasis kaina: 1880 eur (pagal kursą 4,2 PLN/eur) (Kainos gali skirtis esant dideliems svyravimams)

Sąlyga: naujas, Gamybos metai: 2025, The ZX 7045E mill-drill is a versatile machining tool designed for steelworking. It excels in drilling, reaming, boring, tapping, as well as conventional and face milling. The machine provides precise drilling in cast iron up to 45/40 mm diameter. In addition, it enables tapping up to M12 mm, milling up to 80 mm width, and slotting to a depth of 22 mm. The ZX 7045E mill-drill is a reliable tool ready for immediate use! Machine Features - Heavy Duty Cast Iron Base: Robust construction based on a heavy cast iron frame ensures stability and durability, even during intensive use. - Milling Head Height Adjustment on the Support: Unique height adjustment on the support, rather than on the column, allows for adaptation to a wide range of applications. - Large Cross Table: A substantial, precisely ground table surface provides a solid work foundation for a variety of projects. - Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along three axes, resulting in excellent machining accuracy. - Quiet Operation with Ground Gears: Ground gears guarantee low-noise operation, enhancing workshop comfort. - Left and Right Spindle Rotation: Enables bi-directional tool rotation to suit various tasks. - Head Rotates +/- 90 Degrees with Adjustable Height: Flexible angle and height adjustment for complete control over material handling. Additional Options and Benefits: The ZX 7045E is available for immediate delivery from stock and comes with a complimentary accessory set: - Drill chuck - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve The ZX 7045E mill-drill is more than just a tool; it’s a partner capable of meeting even the most demanding challenges in your workshop. Order now and experience outstanding precision and performance! (Base available as an option) Technical Data Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end-mill diameter: 28 mm Maximum tapping size: 12 mm Quill travel: 100 mm Gisdpfx Aboud Iztjdol Spindle taper: MT4 Spindle speeds (6 speeds at 1400 rpm motor): 95, 170, 280, 540, 960, 1600 rpm Max. distance spindle nose to table: 460 mm X/Y/Z travel: 500 / 210 / 425 mm Distance spindle to column: 245 mm Table size: 730 x 210 mm Base size: 400 x 600 mm Motor (S1/S6): 1500W/2100W 400V Overall dimensions (with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment Includes: - Drill chuck arbor MK3/B18 - Basic service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MT4/MT3 - Reducing sleeve MT3/MT2

Sąlyga: naujas, Gamybos metai: 2025, Large and stable radial drilling machine with a wide speed range, ensuring precise and fast machining. Machine Features - Heavyweight and rigid design of the drill provides stability and vibration-free operation - Cubic work table allows for easy adjustment and positioning of the workpiece - Height adjustment of the arm via motor - Control panel mounted at the front for enhanced performance and work ergonomics Godpfsi D Da Asx Abdjil - Ground column surface ensures easy, smooth, and precise arm travel - Drill equipped with manual head and column arm locking - Wide speed range for precise and fast machining Technical Specifications MAX. DRILLING DIAMETER – 35 mm (cast iron); 30 mm (steel) SPINDLE AXIS TO COLUMN DISTANCE – 360 – 1300 mm SPINDLE AXIS TO TABLE SURFACE DISTANCE – 260 – 1300 mm SPINDLE TRAVEL – 200 mm SPINDLE TAPER – MT4 NUMBER AND RANGE OF SPINDLE SPEEDS – (6): 75, 130, 240, 380, 660, 1200 rpm NUMBER AND RANGE OF FEEDS – (3): 0.10, 0.16, 0.25 mm/rev VERTICAL ARM TRAVEL SPEED – 1.3 m/min ARM ROTATION – 360 degrees MAIN MOTOR POWER – 2.2 kW LIFTING MOTOR POWER – 0.75 kW WORKTABLE DIMENSIONS – 510 x 380 x 305 mm MACHINE DIMENSIONS – 800 x 1800 x 2150 mm WEIGHT – 1400 kg Standard Equipment - Drill chuck B16 (3-16 mm) - Arbor for drill chuck B16/MT4 - Reducing sleeve MT4/MT3 - Drift key The listed price is NET. The price does not include transport costs. For further information, please contact us by phone or email. We invite you to browse our full offer on our website.

Sąlyga: naujas, Gamybos metai: 2025, The ZX 7045E 230V drilling and milling machine is a versatile tool for metalworking, ideal for drilling, reaming, boring, tapping, face and side milling operations. The machine allows precise hole drilling in cast iron up to 45/40 mm in diameter. Additionally, you can tap threads up to M12, mill up to 80 mm in width, and create grooves up to 22 mm deep. The ZX 7045E is a reliable tool ready for any job! Machine Features - Heavy-Duty Cast Iron Base: The robust construction with a heavy cast iron frame guarantees stability and durability even under intensive use. - Milling Head Height Adjustable on the Support: Unique height adjustment on the support instead of the column allows adaptation to various applications. - Heavy-Duty Cross Table: The generously sized, precisely ground worktable ensures a solid foundation for a range of projects. - Dovetail Guideways: Innovative dovetail slideways provide smooth movement along all three axes, ensuring excellent machining results. - Quiet Operation Thanks to Ground Gears: Precision-ground gears ensure quiet running and improved workshop comfort. - Left and Right Spindle Rotation: Switch spindle rotation direction for diverse tasks. - Swiveling Head +/- 90° and Adjustable Head Height: Flexible head positioning and height adjustment give you full control over your work. Extras and Benefits: The ZX 7045E model is available from stock and includes a free accessory set: - Drill chuck - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve The ZX 7045E is more than just a tool – it’s a partner ready to handle even the most demanding challenges in your workshop. Order now and experience outstanding precision and performance! (Base available optionally) Technical Data Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum tapping diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speed (6 speeds for 1400 rpm motor): 95, 170, 280, 540, 960, 1600 min-1 Max. spindle nose to table distance: 460 mm Travel X / Y / Z: 500 / 210 / 425 mm Spindle to column surface distance: 245 mm Worktable size: 730 x 210 mm Base dimensions: 400 x 600 mm Motor power s1/s6: 1500W/2100W 230V Gsdpfx Ajwnb T Isbdeil Machine dimensions (h x w x d with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment: - Drill chuck arbor MK3/B18 - Service tools - Drill chuck 3-16 mm/B18 - MT4/MT3 reducing sleeve - MT3/MT2 reducing sleeve

Sąlyga: naujas, Gamybos metai: 2025, Invest in modernity and versatility with the ZX 7055 DRO milling and drilling machine, ideal for small and medium-sized maintenance and production departments. This mid-sized machine not only offers automatic feed with a vertical head but also tapping capabilities and standard digital readout. Product Features Standard digital readout. Discover its reliable features that make the ZX 7055 DRO an excellent choice for your workshop: Heavy-Duty Cast Iron Frame: The solid construction from heavy cast iron is the foundation of durability and precision. The ZX 7055 DRO maintains stability even during the most demanding operations. Automatic Feed: Save time and increase productivity with automatic feed. The motor-driven vertical head allows efficient machining of materials without the need for constant supervision. Robust Cross Table with Precision-Ground Surface: Attention to detail is a key aspect of its design. The heavy-duty cross table with a precision-ground surface ensures exceptional flatness for precise machining results. Dovetail Guideways: Innovative dovetail-shaped guideways ensure smooth and accurate movement on all three axes. Achieve excellent results without compromise. Quiet Operation with Ground Gears: Focus on your work, not the noise. Precision-ground gears allow the milling-drilling machine to operate quietly, providing comfort in your working environment. Left and Right Spindle Rotation: Adapt the machine to your needs. The ability to rotate in both directions offers additional flexibility in the machining process. Gedpeud H Thjfx Abdoil +/- 90° Rotating Head and Adjustable Head Height: Tackle a variety of tasks thanks to the head’s +/- 90° rotation and adjustable height. Achieve precise results under any conditions. The ZX 7055 DRO milling and drilling machine is a modern tool that will redefine your machining experience. Order today and experience exceptional performance in your workshop! MAXIMUM FACE MILL DIAMETER 80 mm MAXIMUM END MILL DIAMETER 32 mm HEAD SWIVEL ANGLE +/- 90° SPINDLE SPEEDS 75, 180, 280, 600, 1000, 1600 rpm SPINDLE FEEDS 0.1; 0.18; 0.26 rpm SPINDLE TAPER MT4 SPINDLE TRAVEL 125 mm (automatic feed) WORKTABLE DIMENSIONS 1000 x 240 mm TABLE TRAVEL X/Y 670 x 185 mm T-SLOTS (WIDTH / SPACING / QUANTITY) 18 mm / 80 mm / 3 SPINDLE DISTANCE TO TABLE 90 - 460 mm SPINDLE DISTANCE TO COLUMN 235 mm MOTOR POWER 1.5 kW / 2.1 HP POWER SUPPLY 400 V WEIGHT 425 kg PACKING DIMENSIONS 970 x 760 x 1160 mm Standard Equipment - automatic spindle feed - digital readout - table longitudinal automatic feed with variable speed adjustment - motorized spindle head height adjustment - cooling system

Sąlyga: naujas, Gamybos metai: 2025, Base for milling-drilling machine ZX 7045 Gjdpfsvxtn Tex Abdsil

Sąlyga: naujas, Gamybos metai: 2025, The drilling and milling machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and boring holes up to 45/40 mm in cast iron, as well as thread cutting of bolts up to M12 mm, milling up to 80 mm width, and slotting up to 22 mm. It is also suitable for cutting and face milling operations. Various accessories can be mounted on the machine. HEAVY AND STABLE CAST IRON BODY MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN MASSIVE CROSS TABLE WITH PRECISION-GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT SPINDLE ROTATION SWIVEL HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Optional machine base available – €200 Technical specifications Gjdpfx Aboud H Hujdsil MAXIMUM DRILLING CAPACITY: 45 mm MAXIMUM FACE MILLING: 80 mm MAXIMUM SLOT/FACE MILLING: 28 mm MAXIMUM THREAD CUTTING: 12 mm QUILL TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min⁻¹ MAX. DISTANCE SPINDLE NOSE TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options): 400V (three-phase motor) PACKING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available equipment MK4/B18 drill chuck arbor Service tools 3–16 mm/B18 drill chuck MK4/MK3 reduction sleeve MK3/MK2 reduction sleeve Polish-language operating manual

Sąlyga: naujas, Gamybos metai: 2025, The XZ7550ZB Milling and Drilling Machine is an excellent tool for professionals. This machine, featuring a straightforward and uncomplicated design, ensures uninterrupted operation over extended periods. Equipped with a vertical head and a horizontal spindle, the XZ7550ZB offers a wide range of machining capabilities. The ISO 40 toolholder taper guarantees secure tool mounting, while the automatic spindle feed further enhances work efficiency and productivity. Power feeds in the X and Y axes, as well as rapid positioning feed in the Z axis, allow for precise processing, and the extendable vertical spindle provides easy access to workpieces. Three mechanical feed rates and an automatic thread-cutting function offer added versatility. The swiveling vertical head with a 0–90° adjustment range, in combination with the extendable and rotatable upper beam, add extra functionality and precision. Machine features: - AUTOMATIC ELECTRIC FEED OF THE TABLE IN Y AXIS - AUTOMATIC MECHANICAL FEED OF THE TABLE IN X AXIS - AUTOMATIC SPINDLE FEED - HEAVY, STABLE, AND HIGHLY PRECISE CAST IRON FRAME - ROBUST CROSS TABLE WITH PRECISION-GROUND SURFACE - DOVETAIL GUIDEWAYS IN ALL THREE AXES - QUIET OPERATION DUE TO GROUND GEARS - LEFT-HAND AND RIGHT-HAND ROTATION - SWIVEL HEAD +/- 90° Technical Data: - Max. drilling diameter: 50 mm - Max. horizontal milling length: 100 mm - Max. vertical milling diameter: 25 mm - Max. tapping diameter: M16 - Max. boring diameter: 120 mm - Spindle taper: ISO 40 - Spindle speeds at 50Hz (rpm): 72–1800 (8) Vertical, 60–1350 Horizontal (9) - Distance between spindle and column surface: 200–700 mm - Distance between spindle and table: 100–480 mm - Distance between spindle axis and table: 0–380 mm - Number, width, and spacing of T-slots: 5 / 14 mm / 44 mm - Spindle stroke: 120 mm - Table size: 1000 x 240 mm - Table travel: 600 x 230 mm - Table feed: 24–720 mm/min (8 speeds) - Spindle feed: 0.015; 0.08; 0.25 mm/rev Gisdpfx Aoud Ic Debdol - Motor (Vertical/Horizontal): 1.5 kW / 1.5 kW - Overall dimensions: 1120 x 1060 x 2035 mm - Weight: 970 kg Scope of Delivery: - SINO 3-axis digital readout - ISO 40 Morse reduction sleeves - B16 drill chuck - CE Declaration of Conformity - 160 mm machine vice - Milling arbor with a set of collets for end mills - Horizontal spindle support / bushing - Long milling arbor - Basic tools - 24 V halogen lighting system - Cooling system

Sąlyga: naujas, Gamybos metai: 2025, CORMAK ZX 40BPC is a robust metal drilling and milling machine. It features a spindle head that can rotate +/- 90 degrees, automatic spindle feed, right and left rotation, a large table, coolant system, optional automatic X-axis table feed, a powerful 2-speed 1.5 kW motor, and a drilling capacity up to 40 mm. Spindle speed up to 3200 rpm. CORMAK Product Features: - Durability – All machines and tools are made from top-quality materials, ensuring longevity and reliable operation. - Precision – Advanced manufacturing technologies provide exceptional accuracy, essential for precision machining tasks. - Innovation – Technical solutions applied in CORMAK products enhance work efficiency and ease of operation. CORMAK is a dynamic brand earning satisfied customers worldwide in both woodworking and metalworking industries. - Adjustable working flexibility – thanks to a rotatable head and adjustable height. - Threading function and reversible spindle direction (right and left), increasing versatility. - Precise depth setting – with a three-arm lever and calibrated hand wheel for accurate depth control. - Automatic spindle feed for greater precision and convenience during drilling. - Advanced oil-lubricated gearbox – equipped with ground and hardened gears, ensuring smooth and durable operation. - Stable construction – solid base ensures secure setup and vibration-free operation. - High performance – thanks to a powerful motor, effective even for tough materials. - Durable column – with ground finish, ensuring rigidity and precise operation. - Safety guard – swing-away plexiglass chuck guard for extra operator protection. - Heavy-duty cast column – provides high machining accuracy and long service life. - Worktable with T-slots (14 mm) – facilitates quick and easy vise and accessory mounting. - Coolant system – standard equipment for safe and efficient extended operation. Technical Data Max. drilling capacity (steel/cast iron): 32/40 mm Face milling width: Giedpfovxhfmox Abdol 80 mm End milling width: 22 mm Spindle travel: 125 mm Spindle taper: MT4 Number of speeds: 12 Spindle speed (rpm): 95-3200 (95, 170, 190, 280, 340, 540, 570, 960, 1100, 1600, 1950, 3200) Max. distance from spindle end to table: 735 mm Max. distance from spindle end to base: 1245 mm Distance from spindle to column surface: 272 mm Table dimensions: 730x210 mm Base dimensions: 690x520 mm Motor power S1/S6: 1.1/1.5 kW (1.5/2.0 HP S1), 1.7/2.2 kW (2.25/3.0 HP S6) Coolant pump motor: 40 W Machine dimensions (height with base): 1200x1000x910 mm Weight: 380 kg

Sąlyga: naujas, Gamybos metai: 2025, Machine Characteristics Heavy, Stable Cast Iron Frame: The robust structure based on a heavy cast iron frame ensures stability and durability even under intensive use. Milling Head Height Adjustment on the Support: Unique height adjustment on the support, not the column, allows the machine to be adapted for a wide range of applications. Heavy-Duty Cross Table for Mill/Drill: The table features impressive dimensions with a precisely ground surface, providing a solid foundation for a variety of projects. Dovetail Guides: Innovative dovetail-shaped guides guarantee smooth movement on all three axes, resulting in excellent machining accuracy. Quiet Operation Thanks to Ground Gears: Precisely ground gears ensure quiet operation, enhancing comfort in the workshop environment. Left and Right Spindle Rotation: Operate the tool in both directions to accommodate diverse tasks. +/- 90 Degree Swiveling and Height-Adjustable Head: Flexible angle and height adjustment provide maximum control over material processing. Digital Longitudinal and Cross Readouts Additional Options and Benefits: The ZX 7045E DRO model is available from stock and comes with a free accessory kit: Drill Chuck MT4/MT3 Reducing Sleeve MT3/MT2 Reducing Sleeve The ZX 7045E DRO mill-drill machine is a high-precision, advanced tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and sturdy construction, it allows for precise milling and drilling on a wide range of materials. Its versatility and dependability make the ZX 7045E DRO the ideal equipment for professional workshops, meeting the demands of even the most complex applications. (Base available as an option) Technical Specifications Gjdpfx Ajx Dkr Nsbdoil Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Quill travel: 100 mm Spindle taper: MT4 Spindle speed (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Max. distance from spindle end to table: 460 mm Travel on X/Y/Z axis: 500 / 210 / 425 mm Distance spindle to column surface: 245 mm Worktable dimensions: 730x210 mm Base dimensions: 400x600 mm Motor power S1/S6: 1500W/2100W 400V Machine dimensions (height with base): 1080 x 770 x 1460 mm Weight: 278 kg Standard Equipment 2-axis digital readout MT3/B18 drill chuck arbor Service tools Keyless drill chuck 3–16 mm/B18 MT4/MT3 reducing sleeve MT3/MT2 reducing sleeve Operator’s manual