Index V 200 pirkti naudotą (148)

Sąlyga: geras (naudotas), Gamybos metai: 2004, Spindle bore: 60 mm Turning length: 280 mm Control system: Siemens 840 D Main spindle speed: 6300 rpm Drive power (spindle motor): 3.3 kW Turret 1: Disc turret Number of tools in turret 1: 8 Tool system: DIN 69 880 / 25mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5500 N Rapid traverse: 24 m/min Milling spindle drive power: 5.000 kW Turret 2: Dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5500 N Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 24 m/min Machine weight: approx. 2.5 t Space requirement: approx. 6.0 x 2.0 x 2.0 m The INDEX ABC is a compact CNC lathe for short-turned parts made from bar stock. It features a slant-bed design with two independent turrets. The upper turret is mainly designated for internal machining and cut-off-side operations, while the lower turret handles external machining. This turret configuration allows for collision-free operation and simple programming with high tool availability. The large open working area promotes optimal chip flow. Working area features two turrets: "Turret 1": - Disc turret with 7 radially arranged tool positions Ø 25 mm DIN 69880 and one position for the reinforced synchronized spindle at turret station 8. With an adapter, tools with 1'' shanks may also be used. The turret head is prepared for the V-guide system. - Synchronized spindle for backworking, allowing simultaneous parallel machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-drilling unit. Starting from the center of the working spindle in a clockwise direction, three stationary back drilling tools are arranged. These are located on the pitch circle of the synchronized spindle. Backworking takes place simultaneously to main spindle machining. Two additional tools can also be mounted and may be fitted with driven tool units. Iodpfx Afowbvhajwoa "Turret 2": - Turret with 6 symmetric dovetail tool holders, each station equipped with two mounting bores for cylindrical shank tools. The following tool systems can be used: - Stationary tools moveable in the Z-direction - Driven tools with Ø25 mm cylindrical shank (two positions per station can be equipped) - Including bar feeder LM 3200 - + various accessories (various diameter guide bushings/tool holders) Technical data: - Bar material diameter: (Ø 25 / Ø 36 / Ø 52) --> Round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> Square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> Hexagon SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> Octagon SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Maximum bar length: 3200 mm --> From Ø 25 mm bars: minimum. 2,500 mm --> Up to Ø 25 mm bars: minimum. 1,500 mm --> Bar tray capacity = approx. 300 = 6 x Ø 52 mm bars Mass (bar feeder): 700 kg

Sąlyga: geras (naudotas), Gamybos metai: 1997, Index ABC Year of manufacture: 1997 Ijdpshd U Hfefx Afwsa Machine number: 400621 Spindles: 1 Max. diameter: 50 mm Turrets: 2 Stations: 8 on turret 1 / 6 on turret 2 C-axis is programmable 1 synchronous spindle in the machine + 2 for regeneration High-pressure pump: yes, 30 bar

Sąlyga: naudotas, TECHNICAL DATA - Number of spindles: 6 - Number of counter spindles: 1 SPINDLES - Maximum bar diameter: 40 [mm] - Spindle speed: 7,000 [rpm] - Spindle drive power: 13/24 [kW] NUMERICAL AXES Iedoxqhtkspfx Afwea - Slide unit 1.1: X and Z axes controlled by CNC - Slide unit 1.2: X and Z axes controlled by CNC - Slide unit 2.1: X and Z axes controlled by CNC - Slide unit 2.2: X and Z axes controlled by CNC - Slide unit 3.1: X and Z axes controlled by CNC - Slide unit 3.2: X and Z axes controlled by CNC - Slide unit 4.1: X and Z axes controlled by CNC - Slide unit 4.2: X and Z axes controlled by CNC - Slide unit 5.1: X and Z axes controlled by CNC - Slide unit 5.2: X and Z axes controlled by CNC - Slide unit 6.1: Z axis controlled by CNC - Slide unit 6.2: X and Z axes controlled by CNC ELECTRICAL SUPPLY - Supply voltage: 380 [V] - Total drive power: 77 [kW] WEIGHT AND DIMENSIONS - Footprint: 3329 x 2032 [mm] - Machine height: 2,654 [mm] - Machine weight: 7,100 [kg] MACHINE HOURS - Operating hours: 47,580 [hrs] EQUIPMENT - CNC control: Siemens 840D (Powerline) - Dual NCU - 2 NC panels - Cutting force monitoring: ARTIS - Chip conveyor - Coolant tank * with high-pressure pump: 80 [bar] - Bar feeder: Index MBL 40-6 - Fire extinguishing system * * NB: Functionality not guaranteed. Should be checked by a qualified company retained by the buyer. - Electrical transformer

Sąlyga: geras (naudotas),

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 080005, • Swing diameter over saddle: 1,920 mm Iodpfx Afewab Rdowoa • Center height: 1,300 mm • Distance between centers: 2,000 to 30,000 mm • Maximum workpiece weight: 10–40 tons • Bed width: 2,119 mm • Spindle speed range: 1–500 rpm • Gear steps: 4 • Spindle nose: A2-15 • Spindle motor: 30/37 kW (optionally up to 60/75 kW) • Spindle bore: 230 mm (optionally up to 610 mm) • Turret type: servo, 4 or 10 positions • Tool section: 50/40 mm • X-axis travel: 1,200 mm • Z-axis travel: 2,000 to 30,000 mm • X-axis ballscrew: 63 mm x P10 • Z-axis ballscrew: 63 mm x P10 (over 5 m: 80 mm x P10) • Tailstock quill diameter: 235 mm (optionally up to 360 mm) • Tailstock quill stroke: 250 mm (optionally up to 300 mm) • Tailstock quill taper: MT #7 • Rapid traverse: 7 m/min

Sąlyga: naudotas, 6-verčių strypinis automatinis staklės Gamintojas: INDEX Ijdpew S Hd Sofx Afwsa Modelis: MS25 Pagaminimo metai: 1987

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2015, veikimo valandos: 34 044 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 270240, ašies skaičius: 6, Strypo skersmuo (maks.): 22 mm, juostos ilgis: 3 000 mm, ašies skersmuo: 40 mm, TECHNINĖ INFORMACIJA Velenų skaičius: 6 Veleno pralaidumas: 40 mm Strypo skersmuo: 22 mm Strypų padavimo ilgis: 4,70 m Strypo ilgis: 3,0 m ĮRANGOS INFORMACIJA Nominali įtampa: 400 V Nominali galia: 60 kW Prijungimo galia: 71 kVA Maksimali apsauga: 125 A Tinklo įtampa: 400 V Elektros dažnis: 50 Hz Valdymo įtampa: 24 V DC Iodpfxew T Rygs Afwja Įjungimo laikas: 50.134 h Hidraulikos veikimo laikas: 43.972 h Darbo valandos: 38.809 h Gamybos valandos: 34.044 h APARATŪRA - Visų 6 pagrindinių velenų energijos tiekimas pakeistas 2025 m. balandį - Vienas NCU be PCU - Strypų padavėjas Iemca SIR MS22 P 33 (pagaminimo metai 2015)

Sąlyga: geras (naudotas), Gamybos metai: 2014, veleno skylė: 65 mm, Aprašymas – Sąskaitos kopiją galime atsiųsti el. paštu. Isdpfx Aow Nrggofwja Tai 3 beveik identiškos komplektacijos mašinos. Mašinas galima įsigyti kaip paketą arba atskirai.

Sąlyga: naudotas, CNC multi-spindle automatic lathe INDEX MS42C Iodpsxpi Iasfx Afwoa

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 585 mm, tekėjimo skersmuo: 470 mm, veleno greitis (maks.): 6 000 aps./min, X ašies eiga: 200 mm, Z ašies eigos atstumas: 600 mm, Lathe in very good condition with comprehensive accessories! TECHNICAL DETAILS Working Area Maximum turning diameter: 470 mm Maximum nominal turning length: 585 mm Travel X-axis: 200 mm Travel Z-axis: 600 mm Turret Number of stations: 14 Tool mounting: according to DIN 69880, diameter 30 mm Tool holder cross-section: 20 x 20 mm Indexing time per station: 0.5 s Driven tool drive torque: 20 Nm Driven tools: 7 stations Driven tool speed: 4,500 rpm Iedpfx Asw Nh Iaofwea Axes Rapid traverse X and Z: 30 m/min Feed force X: 5,000 N Feed force Z: 10,000 N Main Spindle Spindle bore: 65 mm Spindle nose: according to DIN 6353 Maximum direct drive speed: 5,000 or 6,000 rpm Drive power: 22 kW MACHINE DETAILS Control: Siemens Sinumerik 810 Programmable parameters: 700 Dimensions & Weight Dimensions (L x W x H): 3,162 x 1,720 x 1,715 mm Machine weight: 4,800 kg EQUIPMENT 1.5 MB main memory 10-inch color monitor Automatic program memory C-axis Linear and circular interpolation Block-by-block execution Block search Programmed stop Absolute or incremental programming metric or imperial Tool radius compensation M, S, and T functions Fixed cycles and subroutines Logical and arithmetic operations

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, INDIVIDUÁLNE MODULY: 1. POLOAUTOMATICKÝ DEPALETIZÁTOR (model: Depal 512 – mini) na rozbalenie sklenených fliaš z paliet, vyžaduje 1 operátora na vloženie palety do stroja a odstránenie kartónu vloženého medzi vrstvy sklenených fliaš 2. UNIVERZÁLNY OPLACHOVAČ (model: IND-Wash 56 S2) na parnú sanitáciu a oplachovanie fliaš horúcou vodou pred plnením 3. ROTÁČNÝ PLNIAČ (model: IND-Dose 46 PO-12) na plnenie horúceho produktu do sklenených fliaš valcovitého tvaru 4. UZATVÁRACÍ STROJ NA UZÁVERY TYPU TWIST OFF (model: IND-Close 12E) na vákuové uzatvorenie naplnených fliaš pomocou parnej injekcie na vytvorenie vákua 5. PASSEURIZAČNÝ A CHLADIACI TUNEL (model: PT 42-9) na následnú kontinuálnu pasterizáciu produktu 6. STROJ NA VÁKUOVÚ KONTROLU (model: IND-Test 61) na výber a vyradenie nesprávne uzatvorených fliaš Isdpfx Afow Hg Hqowja 7. SUŠIČKA (model: IND-Blow 86) na odstránenie zvyšnej vlhkosti z povrchu fliaš pred aplikovaním etikiet 8. LINEÁRNY ETIKETOVACÍ STROJ NA SAMOLEPIACE ETIKETY (model: IND-Lab 32B) s možnosťou aplikácie etikiet zhora (cez uzáver) aj z boku na valcové fľaše 9. AUTOMATICKÝ STROJ NA SKUPINOVÉ BALENIE A ZMRŠŤOVACIU FÓLIU S PODLOŽKOU (model: IND-pack 29 T) na balenie fliaš na kartónové podložky v rôznych konfiguráciách podľa veľkosti fliaš 10. SÚPRAVA PÁSOVÝCH DOPRAVNÍKOV S PLOCHÝM HORNÝM POVRCHOM (model: IND-Trans 71) na prepojenie jednotlivých modulov linky (dopraveníky medzi sekciami na oplachovanie, plnenie a uzatváranie s krytmi na vrchnej časti)

Sąlyga: geras (naudotas), Index GE42 clamping cylinder GG2713.2101 in good condition Isdpefbup Rofx Afwea

Sąlyga: paruoštas naudoti (naudotas), Swing diameter over bed/cross slide: 600 mm/320 mm, turning length: 820 mm. Includes parts catcher, steady rest, and tailstock. Expected to be available from early 2026. Ijdpst Tfaaefx Afwea

Sąlyga: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 500358, tekėjimo ilgis: 1 250 mm, tekėjimo skersmuo: 300 mm, ašies variklio galia: 43 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, INDEX G300L with Promot gantry loader. The machine is still in production and under power. The Promot loader features 2 round-cycle conveyors, each with approximately 30 pallet spaces. The machine is equipped with high-pressure coolant (40 bar), a paper band filter, and a tool changer. Further information available by email upon request. Iodpfju Nmq Hjx Afwsa

Sąlyga: naudotas, CNC daugiavelenis tekinimo automatas INDEX MS32C Ijdpfx Ajxma Npjfwoa

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 500641, tekėjimo ilgis: 710 mm, tekėjimo skersmuo: 300 mm, X ašies eiga: 215 mm, Y ašies eiga: 180 mm, Z ašies eigos atstumas: 710 mm, bendras aukštis: 2 150 mm, bendras ilgis: 2 150 mm, bendras plotis: 3 160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore (collet clamping): 65 mm Spindle diameter at front bearing: 110 mm Max. spindle speed: 5,000 rpm Spindle nose ISO 702/1 Size: 6 Chuck diameter: 250 mm Max. torque (100% duty cycle): 275 Nm Max. power (100% duty cycle): 43 kW Tailstock Electrically traversable Centre distance (710): 740 mm Max. thrust force (electric): 10,000 N Cross Slide 1 XYZ (upper) Travel X-axis: 215 mm Travel Y-axis: 180 mm Travel Z-axis: 710 / 1,250 mm Feed force X-axis: 8,000 N Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 7.5 m/min Rapid traverse Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Iodpfewxw Upex Afwea Resolution Z-axis: 0.001 mm Tool Turret Number of tools: 12 Tool system DIN 69880: Ø30 mm MACHINE DETAILS Dimensions and Weight Height: 2,155 mm Base area (710): 4,140 mm x 2,155 mm Footprint (710) without bar feeder: 4,140 mm x 3,570 mm Weight (710): approx. 6,500–7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main line fuse: 35 to 125 A EQUIPMENT Set of milling spindles 6-station tool changer HKS-50B KM40 Material removal device Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height: 1,250 mm Coolant fine filtration system: hydrostatic paper tape filter Vacuum rotary filter W-UAT-106A MMS system LUBRIX 750

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 250 mm, ašies skersmuo: 90 mm, įrankių magazino lizdų skaičius: 24, Recently renewed (January 2024): Guideways Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cables and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle bore HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: Taper No. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Iedpfx Aovitznsfwoa Turret 1 Axes: XYZB Stations / driven stations: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / driven stations: 12 / 6 Coolant system Type: Knoll system with paper band filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chucks - Numerous turning and drilling holders with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4, radial and axial - Numerous static holders CDI-Capto C4, radial and axial

Sąlyga: geras (naudotas), Index HBF hydraulic pump and oil pump bar feeder Ijdpfsd Tx A Tsx Afwsa

Gamybos metai: 1976, Sąlyga: paruoštas naudoti (naudotas), Maximum turning diameter: 500 mm, maximum turning diameter over bed/bed slide: 600 mm / 315 mm, spindle speed: 4,000 rpm, maximum slide travel: 500 mm, rapid traverse: approx. 10 m/min. Tool stations: 2 x 8, tool holder: VDI 3425, tool size: 20, maximum bar diameter: 65 mm, maximum thread pitch: 2,000 mm. Documentation available. The machine has a gearbox defect. Ijdpet Td U Nefx Afwsa

Sąlyga: naudotas, Gamybos metai: 1990, Turning diameter 60 mm Turning length 200 mm Number of slides Total power requirement 20 kW Ijdpfx Afjt Hw Atjwea Machine weight approx. t Space requirements approx. m Bore 30 mm, control unit INDEX C 200, spindle speed 7,500 rpm, backside machining, 3-jaw chuck, driven tools, workpiece loader WHU 80

Gamybos metai: 2008, Sąlyga: paruoštas naudoti (naudotas), Steuereinheit Hersteller: SIEMENS Ijdewiad Uopfx Afwoa Hauptantrieb Anzahl der Achsen: 3 Diese 3-Achs Index MC 400 Horizontal-Drehmaschine wurde 2008 hergestellt. Sie eignet sich ideal für präzise Drehbearbeitungen und bietet eine robuste Bauweise sowie zuverlässige Performance. Wenn Sie hochwertige Drehbearbeitungsmöglichkeiten suchen, ist die bei uns zum Verkauf stehende Index MC 400 Maschine eine ausgezeichnete Wahl. Kontaktieren Sie uns für weitere Informationen zu dieser Maschine. Anwendungsbereiche Drehen

Sąlyga: labai geros būklės (naudotas), Index MS42C HBF rod guide Oil distributor Flaps with clamping screws Iodpfxsfdr R Ue Afwoa

Gamybos metai: 2002, Sąlyga: paruoštas naudoti (naudotas), A CNC multi-spindle lathe from Index, comprehensively overhauled in 2020, is available. Number of spindles: 6, maximum bar capacity: 32 mm, spindle speed: 6,300 rpm, weight: approx. 10,800 kg, control system: Siemens Sinumerik. Bearing condition measurement 2024 - HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. Extensive refurbishment works have been carried out on the machine, including the spindles, cooling system, bearings, hydraulic lines, etc. Documentation is available. On-site inspection is possible. Iodewr Dw Rspfx Afwja

Sąlyga: naudotas, Gamybos metai: 1995, Turning diameter 300 mm Turning length 710 mm Control SIEMENS SINUMERIC 840 Total power requirement 40 kW Machine weight approx. 6000 kg Space requirement approx. ... m INDEX CNC lathe with 1 turret and tailstock and CNC control type C 200 - 4 SIEMENS Type G 300 Year of manufacture 1995 # 5000 65 _____ Spindle bore approx. 90 mm Workpiece swing diameter approx. 400(590) mm Turning diameter with chuck operations approx. 300 mm Turning length / distance between centers approx. 710 mm Turret slide travel Z1 (longitudinal) / X1 (cross) 710 / 140 mm Rapid traverse tool carrier 1: 20 m/min 12-position tool turret, ISO/DIN 30 mm Feed force for Z/X axis: 8/13 Nm Spindle speeds / Tool speeds up to max. 5,000 rpm Torque at spindle at 100% duty cycle max. 275 Nm Spindle drive / Tool drive approx. 28 kW Total drive approx. 40 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special features: • SIEMENS CNC 3-axis path control model SINUMERIC 840 C resp. INDEX C 200 - 4, for the following axes: Turret 1 = X/Z as well as C-axis = spindle orientation, swiveling control unit mounted on left side. • Alignment and switching device for the main spindle • Mounted hydraulic 3-jaw chuck FORKHARDT KFD – HS 250 with numerous jaws, max. speed 5,000 rpm. • INDEX turret with 12 tool stations for DIN 30 tool holders, approx. 40 different tool holders included as accessories. The turret positions are prepared for driven tools, powered by the switching device motor. • Hydraulic tailstock with eccentricity correction, quill 60 mm, controlled by foot switch, • KNOLL mobile chip conveyor with coolant system and high-pressure pump, • Front sliding door, otherwise fully enclosed. Oil skimmer Ideal machine for shaft machining and also suitable for chuck workpieces. Robust construction! INDEX (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning – Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Iodot Hw Sujpfx Afwja Turning length / travel of turning slide, (X-Axis) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Rapid traverse 0.1 - 20 m/min Feed force of X/Z-Axis: 8 – 13 kN Steplessly adjustable spindle speeds up to 3,500 rpm Torque force on main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load approx. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 or SIEMENS 840 C for 3 Axes: X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control panel...

Sąlyga: visiškai atnaujintas (naudotas), Index ER 25, long-turning attachment, GT 2351.1300. 3 units in stock. Iedpfx Afofc Rmcewsa