CNC tekinimo staklės

INDEX G300

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 500571, tekėjimo ilgis: 800 mm, veleno skylė: 100 mm, X ašies eiga: 200 mm, Z ašies eigos atstumas: 500 mm, bendras aukštis: 3 300 mm, bendras ilgis: 6 000 mm, bendras plotis: 3 000 mm, bendras svoris: 8 000 kg, valdiklių gamintojas: SIEMENS, valdiklio modelis: SINUMERIK, INDEX G 300 CNC tekinimo staklės - Darbinė įtampa: 400 V - Nominali srovė: 80 A - Pajungimo galia: 47 kW - Dažnis: 50 Hz Hnodpfxox Tz Sns Af Isg - Komplektuojama su dvigubu revolveriu po 12 įrankių kiekviename, taip pat su griebtuvo atrama ir pagrindiniu velenu - Į komplektą įeina drožlių transporteriu, dvi naudojimo instrukcijos bei gamintojo BÜCHEL filtravimo ištraukimo sistema Dėmesio: staklės gali būti transportuojamos standartiniu sunkvežimiu. Dėmesio: gaminys privalo būti atsiimtas tarp 2026-02-18 ir 2026-02-26 pagal suderintą datą. FCA D-78087 Mönchweiler – pakrauta ant sunkvežimio

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Hodpfevivx Njx Af Ijng Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: naudotas, Gamybos metai: 2003, Techninės detalės: Hjdpfx Ajx Dlhlsf Isng Sūkių skersmuo: 270 mm Mašinos svoris apytiksliai: 6,5 t Maksimalus apsisukimo skersmuo: 590 mm Su automatine pakrovimo ir iškrovimo sistema, drožlių transporteriu. G300 su „verpstuklio praėjimas su įvorės užspaudimu 90 mm“, su grąžulu. Mašina neturi pavara valdomų įrankių. Schemoje nurodymas susijęs su revolverio indeksavimo pavara, o ne su pavara valdomais įrankiais.

Sąlyga: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 500358, tekėjimo ilgis: 1 250 mm, tekėjimo skersmuo: 300 mm, ašies variklio galia: 43 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 65 mm, INDEX G300L with Promot gantry loader. The machine is still in production and under power. The Promot loader features 2 round-cycle conveyors, each with approximately 30 pallet spaces. The machine is equipped with high-pressure coolant (40 bar), a paper band filter, and a tool changer. Further information available by email upon request. Hjdpfou Nmq Hex Af Isng

Sąlyga: naujas, Gamybos metai: 2024, Electro-hydraulic press 110 Ton Hodpofh R N Defx Af Ijng Made in Italy The P110 MR is equipped with: - Integrated motor-driven power unit 400 V 50-60 Hz. - Rapid approach and return pump, preset to 20 bar. - Adjustable pressure pump with handwheel to achieve the required force. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge allowing extremely precise adjustment of delivered force. The P110 MR is the only hydraulic press featuring two uprights made from monolithic FE 510 structure, laser-cut with no welded joints at the most stressed points. This feature provides extraordinary robustness. It is deformation-resistant and ensures tight working tolerances. The P110 MR is equipped with a 30-liter tank and has a rapid descent speed of 1,400 mm/min. Weight: 1,100 kg Max pressure: 350 bar Max capacity: 110 tons Rapid flow rate: 34 l/min Slow flow rate: 5 l/min Distance between uprights: 1,004 mm Rapid ram advance: 1,400 mm/min Slow ram advance: 130 mm/min Voltage: 400 V Frequency: 50-60 Hz Power: 3 kW Max current draw: 7.3 A Cylinder stroke: 300 mm Cylinder diameter: 200 mm Rod diameter: 110 mm Piston descent speed: 23 mm/sec Tank capacity: 30 liters

Sąlyga: naudotas, Gamybos metai: 1995, Turning diameter 300 mm Turning length 710 mm Control SIEMENS SINUMERIC 840 Total power requirement 40 kW Machine weight approx. 6000 kg Space requirement approx. ... m INDEX CNC lathe with 1 turret and tailstock and CNC control type C 200 - 4 SIEMENS Type G 300 Year of manufacture 1995 # 5000 65 _____ Spindle bore approx. 90 mm Workpiece swing diameter approx. 400(590) mm Turning diameter with chuck operations approx. 300 mm Turning length / distance between centers approx. 710 mm Turret slide travel Z1 (longitudinal) / X1 (cross) 710 / 140 mm Rapid traverse tool carrier 1: 20 m/min 12-position tool turret, ISO/DIN 30 mm Feed force for Z/X axis: 8/13 Nm Spindle speeds / Tool speeds up to max. 5,000 rpm Torque at spindle at 100% duty cycle max. 275 Nm Spindle drive / Tool drive approx. 28 kW Hsdpfxst Hw Suo Af Ieng Total drive approx. 40 kW - 400 V - 50 Hz Weight approx. 6,000 kg Accessories / Special features: • SIEMENS CNC 3-axis path control model SINUMERIC 840 C resp. INDEX C 200 - 4, for the following axes: Turret 1 = X/Z as well as C-axis = spindle orientation, swiveling control unit mounted on left side. • Alignment and switching device for the main spindle • Mounted hydraulic 3-jaw chuck FORKHARDT KFD – HS 250 with numerous jaws, max. speed 5,000 rpm. • INDEX turret with 12 tool stations for DIN 30 tool holders, approx. 40 different tool holders included as accessories. The turret positions are prepared for driven tools, powered by the switching device motor. • Hydraulic tailstock with eccentricity correction, quill 60 mm, controlled by foot switch, • KNOLL mobile chip conveyor with coolant system and high-pressure pump, • Front sliding door, otherwise fully enclosed. Oil skimmer Ideal machine for shaft machining and also suitable for chuck workpieces. Robust construction! INDEX (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____ Turning – Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Axis) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Rapid traverse 0.1 - 20 m/min Feed force of X/Z-Axis: 8 – 13 kN Steplessly adjustable spindle speeds up to 3,500 rpm Torque force on main spindle approx. 275 Nm Spindle drive 28 kW Total electrical load approx. 40 kW - 400 V - 50 Hz Weight 6,000 kg Accessories / Special Features: * INDEX CNC Control Model C 200-4 or SIEMENS 840 C for 3 Axes: X/Z Axis and Main spindle as C-Axis (Spindle Orientation) Control panel...

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 250 mm, ašies skersmuo: 90 mm, įrankių magazino lizdų skaičius: 24, Recently renewed (January 2024): Guideways Z2 / Z4 / X2; Ball screws Z2 / X2 / Z4; Cables and hoses of the drag chains for Z2 / X2 / Z4 TECHNICAL DETAILS Turning length: 1,250 mm Spindle bore HSP/GSP: 90 / 90 mm Spindle nose HSP/GSP: Taper No. 8 C-axis HSP/GSP: yes (C4) / yes (C3) Turret 1 Hsdpfxsvitzne Af Isng Axes: XYZB Stations / driven stations: 12 / 6 Additional milling spindle: Capto C4 with automatic tool changer for 6 tools Turret 2 Axes: XZ Stations / driven stations: 12 / 6 Coolant system Type: Knoll system with paper band filter Low pressure: 8 bar High pressure: max. 80 bar EQUIPMENT - 2x Hainbuch 65 chucks - Numerous turning and drilling holders with CDI interface - Mechanical steady rest for mounting on turret - Numerous driven tools CDI-Capto C4, radial and axial - Numerous static holders CDI-Capto C4, radial and axial

Sąlyga: geras (naudotas), Gamybos metai: 1999, Ranka parodytos dalys nepridedamos. Hnsdpewbz Tujfx Af Isg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 500522, veleno greitis (maks.): 3 500 aps./min, bendras svoris: 6 500 kg, ašies skersmuo: 140 mm, priešpriešinio veleno didžiausias greitis: 3 500 aps./min, TECHNINĖS DETALĖS Valdymas: Siemens Sinumeric / Index C200-4D Pagrindinis velenas Veleno pralaidumas su įtempimo įvorėmis: 90 mm Veleno skersmuo prie priekinio guolio: 140 mm Veleno nosis ISO 702/1 (dydis): 8 Griebtuvo skersmuo: 250/315 mm Didžiausias vardinis tekinimo skersmuo: 270 mm Didžiausias apsukimo skersmuo: 590 mm Sukimosi greitis: maks. 3 500 sūk./min Priešingas velenas Veleno pralaidumas su įtempimo įvorėmis: 90 mm Veleno skersmuo prie priekinio guolio: 140 mm Hjdpfx Aexvq Rpsf Ijng Veleno nosis ISO 702/1 (dydis): 8 Griebtuvo skersmuo: 250/315 mm Sukimosi greitis: maks. 3 500 sūk./min Min. atstumas iki įtempimo įvorės: 20 mm Greitasis eiga: 22,5 m/min Įrankių laikiklis Įrankių skaičius: 12 STAKLIŲ DETALĖS Matmenys ir svoris Užimamas plotas: apie 8/10,5 m² Aukštis: 2 150 mm Staklių svoris apie: 6,5 t ĮRANGA Kopėčia Automatinė pakrovimo ir iškrovimo sistema

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 500641, tekėjimo ilgis: 710 mm, tekėjimo skersmuo: 300 mm, X ašies eiga: 215 mm, Y ašies eiga: 180 mm, Z ašies eigos atstumas: 710 mm, bendras aukštis: 2 150 mm, bendras ilgis: 2 150 mm, bendras plotis: 3 160 mm, TECHNICAL DETAILS Spindle Working Area Spindle bore (collet clamping): 65 mm Spindle diameter at front bearing: 110 mm Max. spindle speed: 5,000 rpm Spindle nose ISO 702/1 Size: 6 Chuck diameter: 250 mm Max. torque (100% duty cycle): 275 Nm Max. power (100% duty cycle): 43 kW Tailstock Electrically traversable Centre distance (710): 740 mm Max. thrust force (electric): 10,000 N Cross Slide 1 XYZ (upper) Travel X-axis: 215 mm Travel Y-axis: 180 mm Travel Z-axis: 710 / 1,250 mm Feed force X-axis: 8,000 N Hnedpswxw Upofx Af Iog Feed force Y-axis: 16,000 N Feed force Z-axis: 13,000 N Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 7.5 m/min Rapid traverse Z-axis: 20 m/min Resolution X-axis: 0.0005 mm Resolution Y-axis: 0.0005 mm Resolution Z-axis: 0.001 mm Tool Turret Number of tools: 12 Tool system DIN 69880: Ø30 mm MACHINE DETAILS Dimensions and Weight Height: 2,155 mm Base area (710): 4,140 mm x 2,155 mm Footprint (710) without bar feeder: 4,140 mm x 3,570 mm Weight (710): approx. 6,500–7,700 kg Three-phase current: 400 V, 50/60 Hz Connected load: 24 to 83 kVA Main line fuse: 35 to 125 A EQUIPMENT Set of milling spindles 6-station tool changer HKS-50B KM40 Material removal device Workpiece handling WHU201 / WHW80/700 Chip conveyor: hinged belt Discharge height: 1,250 mm Coolant fine filtration system: hydrostatic paper tape filter Vacuum rotary filter W-UAT-106A MMS system LUBRIX 750

Gamybos metai: 1978, Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Hnjdeiw Dlkspfx Af Isg Weight: 2.3 t Tensile force: 6.3 t Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special features: - Coolant / lubricant unit - Without automatic tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideal for machining keyways. Upon request, broaching tools and arbors can be supplied. The machine is available for demonstration under power in our warehouse.