Ima C 21 pirkti naudotą (142)

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in roll (min/max) mm 0.3 / 3 Veneer edges only partially possible up to max. 1.0 mm Panel thickness (min/max) mm 8 / 60 ICOS Open control unit Feed speed m/min (adjustable) 6 - 30 Pressure belt driven by V-belt Spraying unit (for liquid anti-adhesive) Adjustable stop ruler, CNC controlled - Panel infeed system 63.152 (mm 500 x 500) Nodpfexp E R Djx Afaelc Jointing milling unit with CNC-controlled 08.379 (Kw 4.0 x 2) edge pressure zone (CNC-controlled) Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge magazine for rolls (No. 1 + 6 way) Pre-milling unit 08.055.0.1680 (Kw 1.85 x 1) End trimming unit 08.42/30/B (Kw 0.66 x 2) 20 + 30 m/min (0°-25°) Milling unit 08.0587 (Kw 1.0 x 2) Multi-profile - (1 + 3 profiles) Spray units (for glide agent) Contour milling unit (for finish milling) CNC controlled - KFA 20 (Kw 0.18) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0.18 x 2) Standard milling unit for grooving/rebating 08.190 (Kw 4.5 x 1) 90°/180°/270° (CNC controlled)

Būklė: visiškai atnaujintas (naudotas), Single-Sided Edgebanding and Edge Processing Machine (Left) Edgeband Material (Roll) Thickness (min/max) mm: 0.3 - 3 Edgeband Thickness for Strips/Slats (min/max) mm: 1 ALU Panel Thickness (min/max) mm: 6 - 55 Control/Software: IMATRONIC 121 /01 Feed Speed (adjustable) m/min: 6 - 30 FORMATTING PROCESSING: Jointing Cutter Unit with CNC Control 08.376 (2 x 4.5 kW) Sprayer Unit (for liquid release agent) Nodpfxocr T N Dj Afaelc EDGEBANDING SECTION: Lamps for edge heating of workpieces Gluing Unit (PUR glue + pre-melter) 04.1569 Edge Pressure Zone mm: 1000 + edgeband magazine for rolls (compartment No. 6) End Trimming Unit 08.42 (2 x 0.66 kW) Working Speed 25 m/min (0–25°) Pre-Milling Unit 08.0555 (2 x 1 kW) Milling Unit 08.055 (2 x 1 kW) 0°–30° + Sprayer Unit (for sliding fluid) Contour Milling Unit (for fine trimming) CNC Controlled 08.348 (2 x 0.66 kW) Multi-Profile Scraper Unit (CNC controlled) 08.516 Flat Scraper Unit 08.517 (Pneumatic) + Sprayer Unit (for polishing fluid) Buffing Unit 08.614 (2 x 0.25 kW) Universal Milling Unit for Grooving, Rebating and Profiling 08.183 (1 x 3 kW) Smoothing Unit 08.53 Radius Sanding Unit for Straight Edges WI (4 x 0.75 kW)

Būklė: labai geros būklės (naudotas), DVIPUSĖ FORMATAVIMO IR KRAŠTŲ KLIJAVIMO MAŠINA – Pirmoji (1) mašina eilėje Krašto storis iš rulono (min./maks.) mm: 0,3 / 3 Plokštės storis (min./maks.) mm: 8 / 45 (60) Darbinis plotis (min./maks.) mm: 250 / 1300 Valdymas / programinė įranga: ICOS Open (Windows pagrindu) Padavimo greitis (reguliuojamas) m/min: 10 - 50 (Master & Slave) Apsauginiai ir garso izoliaciniai gaubtai FORMATAVIMO APDOROJIMAS (kiekvienai pusei): Skaldymo mazgas (2 x 6,6 kW), Max 35 m/min Kantavimo frezavimo mazgas 75.186 (1 x 4,4 kW) KRAŠTŲ KLIJAVIMO APDOROJIMAS (kiekvienai pusei): Klijų padavimo mazgas (P.U.R. klijai + išankstinis lydymo įrenginys + Hot Melt klijai) VTG 3-24 + 283.201 + 283.19 + 283.203 Prispaudimo zona Nlsdpfexggthex Afasc Kraštų rulonų magazinas (24 vietų) Priešfrezavimo / frezavimo mazgas 08.055 (2 x 1 kW) 0°–30° (30 m/min) Priešfrezavimo / frezavimo mazgas 08.055 (2 x 1 kW) 0°–30° (30 m/min) Profilio gramdymo mazgas 08.515 Lygaus gramdymo mazgas 08.521 Poliravimo mazgas 08.617-2 (2 x 0,18 kW) 3 x standartiniai frezavimo mazgai grioveliams/nuimamoms briaunoms (2 x kairėje + 1 x dešinėje) 08.190 (3 x 4,5 kW) 90°/180°/270°

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Control/software: ICOS Open (Windows-based) Without transfer rail (master & slave systems) Feed speed (adjustable) m/min: 10 - 50 Protective and soundproof cabins "Hopper" (the panels fall directly onto the motorized track chains) Cam pitch (mm): 270 FORMATTING (for each side): Spraying unit (for liquid non-stick agent) Protection cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Free space EDGE PROCESSING (for each side): Gluing unit (hot melt glue + pre-melter) 04.1570 + 283.201 Pressure zone + edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (2 x 0.66 kW) 30 m/min (0°-25°) Milling unit 08.055 (2 x 0.66 kW) 30 m/min Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-2 (2 x 0.18 kW) Free space Nledpfx Ajum Untjfaoc

Būklė: labai geros būklės (naudotas), PILNA DVIPUSĖ FORMAVIMO IR KANTŲ KLIJAVIMO LINIJŲ KOMPLEKTAS, sudarytas iš: OZ2050A) Pakrovimo stotis „MEINERT“ modelis P 415 D/B - L, dviguba padėties stotis. Su centriniu motorizuotu ritininiu stalu. Su 2 grindimis montuotomis motorizuotomis ritiniais, skirtomis ruošinių padavimui į pakrovimo stotį. OZ2050B) 1-oji dvipusė formavimo ir kantų klijavimo staklė „IMA“ modelis Combima / II / 440 / A / R3 OZ2050C) Jungiamasis ritininis stalas „IMA“ modelis IDK L/Q su pasukimo įrenginiu (iš išilginės į skersinę kryptį) OZ2050D) 2-oji dvipusė formavimo ir kantų klijavimo staklė „IMA“ modelis Combima / II / 590 / B / R3 OZ2050E) Jungiamasis ritininis stalas „IMA“ modelis IDK Q/L su pasukimo įrenginiu (iš skersinės į išilginę kryptį) su dvigubos kūgio sistema OZ2050F) DVIPUSĖ IŠKROVIMO STOTIS „MEINERT“ modelis P 415 D/S - L, pilnai su centrine motorizuota ritinine linija. Su 2 motorizuotomis ritininėmis linijomis. Nledpfxjxftt Ej Afasc

Būklė: labai geros būklės (naudotas), Double-sided solo machine (or 1st and/or 2nd machine in a machine line) Roll material (edge) thickness (min/max) mm: 0.3 / 3 – Edge thickness in strips / tapes max. mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control / Software: ICOS Open (Windows-based) Nodsxggzlopfx Afaelc Feed speed (adjustable) m/min: 10 – 50 (master & slave) Safety and soundproof cabins FORMATTING AREA (for each side): - Protection cutter (pre-milling): 75.186 (1 x 4.4 kW) - Planing unit (2 x 6.6 kW) max. 35 m/min - Jointing cutter unit: 75.186 (1 x 4.4 kW) EDGE BANDING SECTION (for each side): - Gluing unit (P.U.R. glue + premelter): VTG 3-24 + 283.203 - Pressure zone + edge magazine for rolls (slot no. 24) - End trimming unit: 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) - Pre-milling/milling unit: 08.055 (2 x 1 kW) 0°-30° (30 m/min) - Multifunction unit (radius and contour trimming unit): MFA 08.342 (2 x 0.66 kW) SERVO max. 20 m/min OPTIONAL: KFA 30 - Profile scraping unit: 08.519 - Flat scraping unit: 08.521 - Spraying unit (for polishing liquid) - Buffing unit: 08.604 (0.25 kW x 4) - 2 x standard milling units for grooving/rebating (1 x left + 1 x right) 08.190 (4.5 kW x2) 90°/180°/270°

Būklė: labai geros būklės (naudotas), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm 0.4 / 3 Edge thickness in pre-cut veneer strips (max) mm 1.3 Panel thickness (min/max) mm 10 / 45 Working width (min/max) mm 244 / 2300 approx. Control / Software: ICOS Open Feed speed (m/min) 8 - 40 No transmission shafts (Master & Slave systems) Safety and sound insulation cabin Nedpsfi Tkvsfx Afajlc Retractable positioning cams, spacing (mm) 270 FORMAT PROCESSING (for each side): Jointing unit 75.30 (6.6 kW x 2) EDGE BANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) 04.1570 + 283.205 Edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (0.2 kW x 2) 40 m/min Milling unit 08.055 (0.66 kW x 2) 0°-30° Multifunction unit (radius trimming and profile trimming unit) MFA 08.342 (0.66 kW x 2) max 25 m/min Profile trimming (copying) unit 08.465 (0.18 kW x 4) max 20 m/min Buffing unit 08.617-2 (0.18 kW x 2) Free space

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a line Edge thickness in rolls (min/max) mm Edge thickness in strips / veneers (min/max) mm Panel thickness (min/max) mm 12 - 60 Working width (min/max) mm 1300 Control/Software: ICOS open Feed speed (adjustable) m/min 9 - 45 No transmission bar (Master & Slave systems) Top pressure driven by V-belt SIZING UNIT (for each side): Jointing cutter unit 75.30 (Kw 6.6 x 1) EDGE BANDING UNIT (for each side): Gluing station (P.U.R. adhesive + premelter) 04.1569 + 283.205 Pressure rollers (revolver) for straight and shaped (softforming) edges mm 1,050 Edge magazine for rolls (compartment no.) 6 End trimming unit 08.42 (Kw 0.2 x 2) 40 m/min Pre-milling unit 08.055 (Kw 0.66 x 2) 0°-30° Milling unit 08.0582 (Kw 0.66 x 2) 0°-30° Nodofi Tkgopfx Afaslc Scraper unit 08.50 Buffing unit 08.617-2 (Kw 0.18 x 2)

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 8 / 60 Control system ICOS Open Feed speed m/min (adjustable) 16 - 30 Top pressure driven by V-belt Spray unit (for liquid anti-adhesive) Adjustable fence, CNC controlled Jointing cutter unit with CN-controlled 08.379 (Kw 4.0 x 2) Edge pressure zone (CN-controlled) Gluing unit (P.U.R. glue + pre-melter) VTG + 283.203 Edge magazine for rolls (compartment No.) 6 End trimming unit 08.42/30/B (Kw 0.2 x 2) max 30 m/min (0°-25°) Nlodjd Scydjpfx Afaoc Milling unit 08.0587 (Kw 1.0 x 2) 4 profiles Multi-function unit (radius milling and contour trimming unit) KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit 08.516 (4 profiles) Flat scraper unit 08.521 Spray unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 08.190 (Kwv 4.5 x 1) 90°/180°/270° CNC

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness, roll material (min/max) mm 0.3 / 3 Edge thickness, solid/lath material (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Nodpfx Asd Rcigefajlc Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable): 6 - 30 No transmission bar (master & slave systems) Top pressure driven by V-belt Spraying unit (for liquid anti-adhesive) Jointing unit 08.376 (KW 4.5 x2) Free station Gluing station (hot melt adhesive) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.): 2 End trimming unit 08.42 (KW 0.66 x 2) 0°-25° Milling unit 08.055 (KW 1 x 2) 0°-30° Multifunctional unit (radius milling and profile milling unit) 08.342 (KW 0.66 x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Spraying unit (for polishing liquid) Buffing unit 08.612 Free station (for groove/slotting unit)

Būklė: naudotas, Complete factory for furniture manufacturing, consisting of: SZ0M23) Angle panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Model GammaDue (3800x2200 mm) SZ0M26) Multi-blade panel saw "GABBIANI" (finished panels 4250x2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper/veneer/laminated panels SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper/veneer/laminated panels SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed "RBO-BIESSE" automatic handling system SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with a second double-sided sizing and edge banding machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Model KAL 310 with splitter "NARDELLO" Model Elegance SZ0M35-36) Boring machine "BIESSE" Techno Logic with infeed and stacking system "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling system "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Model Author 600 KL SZ0M56) Roll slitting and winding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" Nledpfx Ascr U Ursfaec SZ0M11-17) Preparation line for honeycomb panels SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (dimensions ?? x ?? mm) SZ0M21) Sizing and calibrating line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Numerous other machines (VITAP drilling machine, circular saws, glue application machines, etc.), dust extraction system, roller conveyors, shelving (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Būklė: beveik kaip naujas (parodų įrenginys), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.3 / 3 – for strips mm max 1 Nljdpfsgbug Nex Afaec Panel thickness (min/max) mm 8 / 60 (Laser – max 44) Control ICOS Open Feed speed m/min (adjustable) 16 – 30 Top pressure driven by V-belt Spraying unit (for liquid non-stick) Adjustable fence, CNC controlled Panel infeed system 700.101 (mm 500 x 500) Jointing cutter unit with CNC control 08.379 (Kw 4.0 x 2) Edge pressing zone (CNC controlled) Gluing unit (P.U.R. adhesive + premelter) 04.0836 + 283.1518 (edge feed servo motor) adjustable via CNC Glue application unit (premelter with laser) Laser System IMALUX Spraying unit (for separating agent) Pressure zone + edge magazine for rolls (compartment No.) 6 Cross-cut saw unit Linear 08.428 LKA V30/2 (Kw 0.2 x 2) speed up to 30 m / min (0° - 25°) Multi-profile milling unit (CNC controlled) 08.0587 (Kw 1.0 x 2) 4 profiles Contour milling unit (for fine milling) CNC controlled KFA 20 (Kw 0.5 x 1) max 25 m/min Profile scraper unit DUO (4 profiles) Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (Kw 0.18 x 4) Universal milling unit for grooving/rebating and profiling 2x08.190 (Kw 4.5 x 2) 90°/180°/270° (CNC)

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Nedpfx Ajidqphofaolc Feed speed m/min (adjustable): 6 - 30 Top pressure: belt-driven Adjustable guide fence: CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps for heating the workpiece edge Gluing unit (Hot Melt + Pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartments No.): 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled 08.348 (KW 0.66 x 2) 4 profiles Profile scraping unit 08.516 (4 profiles) Flat scraping unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving, rebating, and profiling 08.183 (Kw 3 x 1)

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Cantilever design, ICOS-Open control system. Software: IMAWOP + IMAwinCAD Setup table with consoles. No. 6 consoles (1450 mm) DYNAPOINT Automatic positioning of the consoles (X axis) Automatic positioning of the vacuum pods (Y axis) Automatic tool changer – 18 tool positions Max. working area (X - Y - Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor Including separate electrical cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): 1 vertical main spindle (milling unit) HSK F63 – drive power 18 kW (S6) Saw 90°, fixed, diameter 200 mm Edge banding unit (installed on the machine) VT 100 2-position roll magazine Combined aggregate (flush milling/profile scraper) Feed system with brush table 6 clamps for fixing and moving the panel on the machine’s vacuum pods Nlsdstixpujpfx Afaec Workpiece outfeed with motorized rollers + right-angle transfer system

Būklė: labai geros būklės (naudotas), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP Software) Maximum working area (X - Y - Z) mm: 3100 x 2000 x 100 Maximum working area (X - Y - Z) for edge banding (mm): 3100 x 1925 x 60 No. 6 clamping tables with consoles (number of consoles) - mm 1400 LED setup aid for vacuum cup (sleeve) positioning (Y-axis) No. 1 vacuum pump (capacity 250 m³/h) Safety enclosure for the working head, safety foot mats No. 1 vertical main spindle (milling unit) HSK F63 (18 kW) Automatic tool change system (carousel changer), 18 tool positions No. 14 independent vertical drilling spindles (2 x 1.2 kW) Nsdpfx Ajq Nmutsfaelc Cross unit with 4 horizontal drilling spindles + grooving saw (max. diameter mm 125) Edgebanding unit - hot melt glue applicator VT 100 No. 2 edge magazine for roll material OPTIONS: No. 1 adapter unit "FLEX 5" model VARIO NC No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper No. 1 barcode reader

Būklė: labai geros būklės (naudotas), VIENPUSĖ BRIAUNŲ KLIJAVIMO MAŠINA (KAIRĖ PUSĖ) Briaunos storis ritiniais (min./maks.) mm 0,3 / 3 Nsdpeyk Tkvefx Afaelc Briaunos storis juostomis / lentelėmis (min./maks.) mm 0,8 / 20 Plokštės storis (min./maks.) mm 8 / 60 Valdymas ICOS Open Padavimo greitis m/min (reguliuojamas) 6 - 30 Viršutinis spaudimas – pleištinis diržas Apsauginės ir garso izoliacijos kabinos PAPILDOMAI: 63.152 plokščių padavimo sistema (mm 500 x 500) Reguliuojamas atraminis liniuotas – valdomas C.N Apipjovimo frezavimo mazgas su CN valdymu 08.379 (Kw 4,0 x 2) Kantės spaudimo zona (CN valdymas) Klijavimo blokas (karšto lydalo klijai) 283.1513 Briaunų ritinių magazinas (skyrių sk.): 1+2 Kirtimo mazgas 08.42/30/B (Kw 0,66 x 2) maks. 30 m/min (0°-25°) Frezavimo mazgas 08.055 (Kw 1,85 x 2) 0°-25° Daugiaveiksmis mazgas (spindulio frezavimas ir formos frezavimo mazgas) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profi linės nuvalymo mazgas 08.519 Plokščios nuvalymo mazgas 08.521 Purškimo mazgas (poliravimo skysčiui) Poliravimo mazgas 08.617-2 (Kw 0,18 x 2)

Būklė: labai geros būklės (naudotas), 5-Axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding ICOS CNC control unit (IMAWOP software) Maximum working area (X - Y - Z) mm: 4000 x 1600 (2000) x 100 (Z travel path mm 650) Maximum working area (X - Y - Z) during edge banding (mm): 4000 x 1600 x 100 No. 8 clamping tables with consoles (number of consoles) – mm 1400 LED positioning guides for vacuum suction cups (positioning along the Y-axis) No. 2 vacuum pumps (capacity 140 m³/h) Safety cabin for machining head, safety tread mats Chip conveyor No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool changer (carousel type), No. 18 tool positions Nlsdpjw A Ruqsfx Afajc No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swivels 90° in X-Y direction), diameter (mm) 200 Edge banding unit (PUR glue + Pre-melter 283.203) VT 100 / 100 WITH 45° SWIVELLING EDGE BANDING UNIT No. 2 edge magazine for rolls OPTIONS: No. 1 adapter unit for flush or chamfer milling No. 1 adapter unit for flush milling and profile scraper

Būklė: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Nlsdpfx Aoifnzdsfasc Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Būklė: dilaminuotas dirbtuvėje (naudotas), DOUBLE-SIDED FORMATTING AND EDGE BANDING MACHINE – First (1st) Machine in a Line Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.4 / 1 Roll material (edges) thickness (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 / 1300 Njdpfoyypi Uox Afajlc Control/Software: ICOS Open (Windows XP) Feed speed (adjustable) m/min: 10 - 50 No transfer bar (master & slave systems) FORMATTING OPERATION (on each side): • Spraying unit (for liquid anti-adhesive) • Milling unit (2 x 8 kW) EDGE BANDING OPERATION (on each side): • Gluing unit (Hot Melt glue + pre-melter) 04.1570 + 283.205 • Edge magazine for rolls (compartment qty): 6 • Servo-drive guillotine shears (for trimming edge material) • Pressure zone (CNC-controlled) • Premilling unit 08.055 (2 x 1 kW) 0°–30° • Profile scraping unit 08.519 • Flat scraping unit 08.50 • Buffing unit 08.617-2 (2 x 0.18 kW) • Spraying units (for polishing agent) • Universal milling unit for grooving/rebating and profiling – 08.190 (1 x 4.5 kW) 0°–90° / 180°–270°

Būklė: labai geros būklės (naudotas), 4-sided sizing- and edge-banding line + through-feed drilling machine Comprising the following machines: A) Loading system "IMA" (bridge type) with double pick-up station and central motorized roller conveyor. With 2 outer, floor-mounted, motorized roller conveyors for feeding panel stacks to the loader B) 1st double-sided sizing and edge-banding machine "IMA" model Combima/N/II/230/A/R3 (1300 mm) C) Panel turning device (from longitudinal to crosswise orientation) "IMA" D) 2nd double-sided sizing and edge-banding machine "IMA" model Combima/II/740/B/R3+ (3300 mm) with KFA 30 (contour milling unit for fine trimming) E) Through-feed drilling machine "IMA" model I-Magic (with 2 horizontal and 4 lower vertical drilling supports) F) Motorized roller conveyor "IMA" G) Panel turning device (from crosswise to longitudinal orientation) "IMA" Njdpfsyyb Suex Afaelc H) Stacking system "IMA" (bridge type) with double stacking station and central motorized roller conveyor. With 2 outer, floor-mounted, motorized roller conveyors for removing panel stacks from the unloader

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, Carton width range: 28mm-92mm, carton height range: 14mm-60mm, carton length range: 55mm-190mm, max. total cross-section (width + height): 140mm, packaging capacity: 120 cartons/min, machine dimensions X/Y/Z: approx. 2550mm/1250mm/1800mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Njdpfev Suhbjx Afaslc

Būklė: labai geros būklės (naudotas), VIENPUSĖ BRIAUNŲ KLIJAVIMO MAŠINA (KAIRĖ PUSĖ) Briaunos storis ritiniais (min./maks.) mm 0,3 / 3 Briaunos storis juostomis / lentelėmis (min./maks.) mm 0,8 / 20 Plokštės storis (min./maks.) mm 8 / 60 Valdymas ICOS Open Padavimo greitis m/min (reguliuojamas) 6 - 30 Nlsdpfsyxl Sisx Afaoc Viršutinis spaudimas – pleištinis diržas Apsauginės ir garso izoliacijos kabinos PAPILDOMAI: 63.152 plokščių padavimo sistema (mm 500 x 500) Reguliuojamas atraminis liniuotas – valdomas C.N Apipjovimo frezavimo mazgas su CN valdymu 08.379 (Kw 4,0 x 2) Kantės spaudimo zona (CN valdymas) Klijavimo blokas (karšto lydalo klijai) 283.1513 Briaunų ritinių magazinas (skyrių sk.): 1+2 Kirtimo mazgas 08.42/30/B (Kw 0,66 x 2) maks. 30 m/min (0°-25°) Frezavimo mazgas 08.055 (Kw 1,85 x 2) 0°-25° Daugiaveiksmis mazgas (spindulio frezavimas ir formos frezavimo mazgas) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profi linės nuvalymo mazgas 08.519 Plokščios nuvalymo mazgas 08.521 Purškimo mazgas (poliravimo skysčiui) Poliravimo mazgas 08.617-2 (Kw 0,18 x 2)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, 30 packs/min – Siemens Simatic OP7 Máquina envolvedora con sistema de retractilado y conformado de paquetes, adecuada para productos cosméticos y artículos pequeños embalados. El equipo agrupa productos y los enfunda con film plástico, pasando posteriormente por un túnel de retracción para lograr un empaquetado compacto. Dispone de portarrollos de film superior e inferior, y sistema manual de unión de film. El túnel de retracción cuenta con una sección de enfriamiento en la salida y regulación de velocidad ajustable. La máquina es apta para diferentes formatos de producto y paquete, y se entrega con documentación técnica. Velocidad máxima: 30 paquetes/min Ancho del transportador de cadena articulada: 80 mm Ancho del transportador del túnel de retracción: 480 mm Panel de control: Siemens Simatic OP7 Sistema de film: Portarrollos superior e inferior con sistema manual de unión de film Túnel de retracción: con sección de enfriamiento en la salida Regulación de velocidad: ajustable Dimensión de producto (mín/máx) Longitud: 50 – 100 mm Altura: 100 – 300 mm Ancho: 25 – 60 mm Dimensión de paquete (mín/máx) Longitud: 75 – 330 mm Altura: 100 – 300 mm Ancho: 50 – 100 mm Información adicional Sistema de sobrealimentación incluido Portarrollos de film superior e inferior Nlodpfsyt Hiqex Afaec Documentación disponible

Būklė: dilaminuotas dirbtuvėje (naudotas), Prijungimo galia 380V 5,5kW Nodpfx Ajx Ezqbjfajlc Volelio skersmuo 900 mm Staklių aukštis 2950 mm Staklių stalas 1310 x 1020 mm Sustojimo ribotuvas

Būklė: labai geros būklės (naudotas), 4-axis CNC-controlled MACHINING CENTER Gantry-style construction, ICOS-Open control system. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with beam supports. Number of supports: 6 (1400 mm) Automatic positioning of the supports (X-axis) Automatic positioning of vacuum suction cups (Y-axis) Automatic tool change system Disc-type tool changer – magazine capacity: 18 tool positions Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X-Y-Z): 295 x 115 x 14 mm Maximum workpiece dimensions (X-Y-Z): 4250 x 2200 x 60 mm Nledsvxhnuspfx Afasc Chip conveyor Supplied with separate electrical and control cabinet Total connected load (kW): 28 WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 – Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for securing and moving panels to the machine’s vacuum pods 5 air tables for staging panels before processing Programmable vacuum system for lifting panels onto the conveyor belt Panel exit system with motorized conveyor belts