Hsm pirkti naudotą (58)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 20 331 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 970 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 750 kg, bendras svoris: 33 000 kg, Good day, We hereby offer you, without obligation, a used, complete bale press line consisting of a baler from HSM, type VK 8818 R-FU including conveyor technology and wire feed stations. Kdsdpsyz Af Ejfx Abvjl The following technical data have been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we cannot accept any liability. Technical data – press: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Pressing force, main press: 1000 kN Specific pressing force: 120 N/cm² Pressing force, shearing edge ejector: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical throughput: 643 m³/hour Bale dimensions: 1,100 x 750 mm; variable length, 600 up to 2000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fuse protection: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Throughput rates at bulk density of: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights at a bale length of approx. 1.2 m: 650 – 750 kg/bale, depending on material Hydraulic oil tank capacity: 2,000 L HVI 46 PLC control: Siemens S7-300 Operator panel: Siemens TP 700 Overall press dimensions assembled: 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions (press with conveyor system): 35,000 x 8,480 x 7,745 mm (L x W x H) Weight of the press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Special equipment ordered additionally: Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard drive (2 x 45 kW) with identical output performance Manual switching on/off of the number of wire ties to save strapping wire on non-expansive materials Shearing edge ejector with 121 kN pressing force Sensor-based wire monitoring with press shutdown in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the press: The entire press line (baler and conveyor system) is in good, immediately operational condition. The system was cleaned weekly by the operator, lubricated and serviced as specified by the manufacturer. Technical data – chain belt conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feed belt length: 7,000 mm Incline belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of delivery: HSM VK 8818 R-FU baler Maintenance platform Bale chute Wire feed stations Wire roll trolleys (without wire rolls) Stadler chain belt conveyor KF 1800 Transverse sliding belt conveyor Pit cover from feed conveyor to pit Second control cabinet for press operation at the conveyor Machine documentation in English Delivery time: The entire line is already dismantled, stored, and can be loaded at short notice after receipt of payment. We would be pleased if this or one of our other baling presses is of interest to you. Your Service Team Mertens & Frowein GmbH

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 10 t, pildymo angos plotis: 580 mm, pildymo angos ilgis: 900 mm, kamuolio ilgis: 800 mm, ryšulio plotis: 500 mm, ryšulio aukštis: 600 mm, balo svoris: 100 kg, bendras plotis: 1 000 mm, bendras aukštis: 1 540 mm, bendras ilgis: 4 700 mm, bendras svoris: 1 200 kg, galia: 6,8 kW (9,25 AG), transporto ilgis: 4 700 mm, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, Mašina buvo pas mus kapitališkai atnaujinta, visiškai išardyta. Pagrindinis cilindras naujai sandarintas. Nauji hidrauliniai vamzdžiai. Naujas hidraulinis alyva. Papildomas alyvos variklis. Atnaujinti polikarbonato langai. Naujai sureguliuoti presavimo plokštės kreipiamieji ritinėliai. 3 kartus horizontaliai rankiniu būdu surišama. Surišimas viela. Balo ilgis reguliuojamas: 400, 600, 800, 1000 mm. Yra naudojimo instrukcija su elektros ir hidraulinė schema. Kdodpfxjy D Dr Ss Abvel

Būklė: naudotas, Modelis: HSM V-press 1160 plus presavimo presas Presavimo jėga (kN): 59 Našumas (balių/val.): 1-2 Didžiausias baliaus dydis (mm): 1200x1100x1000-1200 Išmatavimai (ilgis x plotis x aukštis, mm): 1780x1150x2985 Galia (kW): 4 kW Kdsdsv Al Tijpfx Abvsl Svoris (kg): 2300 Pagaminimo metai: 2018–2019

Būklė: geras (naudotas), HSM 155.1 VL baler Pressing force: 18 tons Specific pressure: 2.33 kg/cm² Theoretical throughput: 3 bales/h, i.e. approx. 500 kg/h Bale dimensions: 1100 x 700 x 800 mm Bale weight: 150–250 kg Power supply: 400 V / 4 kW Kedpsv Alacofx Abvjdl

Būklė: naudotas, Gamybos metai: 2013, spaudimo jėga: 40 t, Gamintojas: HSM Kdodpsyq Ngtjfx Abvol Tipas: HL 4010 Re Pagaminimo metai: 2015 Presavimo jėga: 40 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 4 t, kamuolio ilgis: 500 mm, ryšulio plotis: 700 mm, ryšulio aukštis: 450 mm, balo svoris: 50 kg, HSM 45 VL – Technical Data Feature Value Pressing Force approx. 44 kN (4.5 tons) Motor Power / Power Supply 1.5 kW / 400 V, 50 Hz (CEE 16A) Kdedpewuk Nrsfx Abvol Idle Cycle Time approx. 23 seconds Throughput Capacity (theoretical) approx. 38 m³/h (3–6 bales/hour) Press Chamber (W × D × H) 700 × 500 × 940 mm Filling Opening (W × H) 700 × 600 mm Max. Bale Size (W × D × H) 700 × 500 × 450 mm Bale Weight approx. 30–50 kg Machine Dimensions (W × D × H) 840 × 720 × 2085 mm Filling Height 500 mm Machine Weight approx. 374 kg

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 54 t, įėjimo įtampa: 400 V, galia: 4 kW (5,44 AG), įėjimo dažnis: 50 Hz, Siūlome šią naudotą HSM 500.1 V1 presą baloms, pagaminimo metai – 2000. Modelis: HSM 500.1 V1 Mašinos numeris: 6132.234.0 Serijinis numeris: 210183092 Darbinis slėgis: 54 t Įtampa: 400 V Dažnis: 50 Hz Variklio galia: 4 kW Kodpfx Abeym Nmrsvsdl Nominali srovė: --- A Pagaminimo metai: 2000 Jei turite klausimų arba reikia papildomos informacijos, prašome parašyti žinutę arba susisiekti telefonu.

Būklė: naudotas, Gamybos metai: 2012, spaudimo jėga: 4 t, Used HSM V-Press 504 Baler The HSM V-Press 504 vertical baler is a compact yet highly efficient machine designed for compressing cardboard and foil waste. Thanks to its robust construction, user-friendly operation, and modern control system, this model is an ideal solution for manufacturing companies, warehouses, retail stores, or logistics centers that generate substantial amounts of packaging waste daily. Manufactured by the renowned German brand HSM, the baler ensures reliable performance and a long service life. Key advantages of the waste paper baler: - 40 kN pressing force – effective compression reduces waste volume by up to 95%. - Efficiency and ergonomics – the compaction process starts automatically when the door is closed, and the ram returns to its starting position automatically. - Modern control system – microprocessor control with a membrane keypad and graphic text display provides easy monitoring of the working process. - Double doors with lever – safe and convenient operation, even for intensive use. - Compact bales up to 60 kg – easy to transport and store processed waste. - Integrated bale ejector – increases operator safety and comfort. - Energy-efficient operation – 1.1 kW motor offers full functionality with low energy consumption. - Stable, durable construction – ensures reliability over prolonged use. Offer details for the HSM V-Press 504 waste paper baler: - Product code: MTP006524 - Condition: used - Year of manufacture: 2012 - Model: V-Press 504 - Width: 102 cm - Depth: 81.5 cm - Height: 193 cm - Weight: 290 kg - Power: 1100 W Kdjdpfx Aeyim Ayobvjl - Voltage: 230 V Net price: €2,859.00 per unit * I have a large stock; price negotiable for bulk orders. * Delivery available throughout Europe. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Būklė: paruoštas naudoti (naudotas), Manufacturer: HSM Model: VL 155.2 Dimensions (W x D x H): 1450 x 926 x 2400 mm Pressing force: 16 t Filling opening: 1100 x 590 mm Filling chamber dimensions: 1100 x 700 x 1130 mm Bale size: 1100 x 700 x 950 mm Bale weight: 110 - 200 kg Connection: 400 V / 50 Hz Ksdpfxev Ai Tge Abvjdl Drive power: 4 kW Rated current: 8.5A Tying: 4-way vertical Throughput: 4 - 8 bales/h Machine weight: 940 kg Year of manufacture: 2001-2005

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, veikimo valandos: 12 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 630207349, HSM V-Press 825 Plus Pro – beveik nenaudota, suspausta tik 16 ryšių Parduodama HSM V-Press 825 Plus Pro, išskirtinai mažai naudota. Įrenginys per visą laiką pagamino tik 16 ryšių, todėl praktiškai yra kaip naujas. Idealiai tinka įmonėms, ieškančioms aukštos kokybės presavimo įrenginio, nenorintiems mokėti už naują mašiną. Kdedpfx Abjyy Ddaevsl

Būklė: naudotas, Gamybos metai: 2014, spaudimo jėga: 40 t, Gamintojas: HSM Tipas: HL 4010 Li Pagaminimo metai: 2014 Spaudimo jėga: 40 t Kdjdpfsyibymjx Abvsl

Būklė: naudotas, Gamybos metai: 2015, Gamintojas: HSM Tipas: HL 4010 Re Ksdpjyibv Iefx Abvsdl Pagaminimo metai: 2015 Presavimo jėga: 40 t

Būklė: naudotas, Gamybos metai: 2012, spaudimo jėga: 40 t, Gamintojas: HSM Modelis: HL 4010 Li Pagaminimo metai: 2012 Kdodpfsx H R U Sjx Abvel Spaudimo jėga: 40 t

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2015, Gamintojas: HSM Tipas: HL 4010 Li Kodjyhbxcopfx Abvjdl Pagaminimo metai: 2015 Presavimo jėga: 40 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, Technical Data: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Idle throughput (theoretical): 643 m³/h Capacity at 50 kg/m³ (theoretical): 32.15 t/h Feed opening width x length: 970 x 1,800 mm Bale width x height x length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with matching shaft covers - 1 carrier and maintenance platform for conveyor and hopper - 1 STADLER feeder - 1 HSM VK8818 R FU (100 t) automatic channel baler - 1 wire stand for 500-kg soft wire spools - 10 wire spool carts - 1 multi-function control system for the baler - Complete construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning upon request. Weight: 33,000 kg Binding type: wire Kjdpsygud Ajfx Abvodl Processable materials: plastic film, mixed paper, cardboard, HDPE/LDPE hollow containers, and plastic bottles The plant is currently in operation and can be inspected during ongoing business. The machine will be dismantled on 16/02 and can be inspected at our site after that. Available immediately!

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, 103 USED Industrial Shredder HSM FA 400.2 in very good technical condition. One of the narrowest classes among industrial shredders of this type. In addition to paper, it also destroys plastic cards, CDs, USB drives, and floppy disks. Thanks to its robust construction, the unit offers high performance and a long service life. Material feeding from the input table is handled by an electrically driven conveyor belt. Continuous operation and reverse buttons. Automatic stop when the shred bin is removed or full. Automatic reverse function in case of paper jam. Standard equipment includes a 460 L mobile bin and a front shelf. Kodpfjw Axdmex Abvjdl Technical advantages: hardened, one-piece steel cutting rollers, an extremely powerful and energy-efficient motor designed for continuous operation, with thermal protection. TECHNICAL DATA: Sheets shredded per cycle (70g/m²): 130 Sheets shredded per cycle (80g/m²): 104 Cutting width: 5.8 mm Feed width (mm): 428 Motor power: 4000 W Dimensions (H x L x W): 1650 x 1568 x 1157 mm Weight (kg): 425

Būklė: paruoštas naudoti (naudotas), HSM VK 42/1200 Fully Automatic Baler Pressing force: 42 tonnes Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Press length: approx. 7 metres Press weight: approx. 6000 kg Binding: 4 x automatic wire tying Kdodpfsra Nrxsx Abvjl

Būklė: labai geros būklės (naudotas), HSM HL 4809 Baling Press - Large filling opening, ideal for bulky boxes - Container tipper for convenient loading Pressing force in kN: 480 - Motor power in kW: 10.7 - Voltage/Frequency: 3 x 400 V / 50 Hz - Bale weight in kg (depending on material): up to 400 kg - Bale dimensions length x width x height in mm: 1200 x 1100 x 750 - Machine dimensions length x width x height in mm: 5648 x 1849 x 2515 Idle cycle time in seconds: 53 - Manual strapping: 4 times with wire Year of manufacture: 2015-2017 Complete baler, side covers removed for transport Baler has been serviced by authorized service provider Kdedpfjv Ak Npsx Abvol

Būklė: geras (naudotas), - Didelė pildymo anga, idealiai tinka didelėms dėžėms - Konteinerio vartytuvas patogiam užpildymui Jėga kN: 400 Kedpfx Asv Amv Eobvedl Rulono ilgis: 1 100 mm Rulono plotis: 750 mm Rulono aukštis: 750 mm Preso ilgis: 5 640 mm Preso plotis: 1 674 mm Preso aukštis: 2 500 mm Svoris: 4 450 kg - Variklis kW: 9 - Įtampa/dažnis: 3 x 400 V / 50 Hz - Rulono svoris kg (priklauso nuo medžiagos): iki 350 kg - Rankinis surišimas: 3 kartus viela Metai: 2013 Rulonų presas Hsm HL 4010 LI - Didelė pildymo anga, idealiai tinka didelėms dėžėms - Konteinerio vartytuvas patogiam užpildymui Jėga kN: 400 - Variklis kW: 9,5 - Įtampa/dažnis: 3 x 400 V / 50 Hz - Rulono svoris kg (priklauso nuo medžiagos): iki 350 kg - Rankinis surišimas: 3 kartus viela Metai: 2012

Būklė: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 40 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 990 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, bendras svoris: 23 000 kg, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 643 m³/val, Good day, Kjdpfxeymmtcj Abvsdl We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we provide no guarantee. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Chamber feed opening: 990 x 1,800 mm Theoretical throughput: 643 m³/hour Bale size: 1,100 x 750 mm, length variable from 600 to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions – press with conveying technology: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compaction of paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger baler in May/June 2026. Until then, the machine can be inspected under working conditions with material throughput. We would be pleased if this baler is of interest to you. Your service team at Mertens & Frowein GmbH

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, HSM roll cutting saw with dust extraction system and acoustic enclosure. TYPE: RT650/2800 Year of manufacture: 2014 Voltage: 230 / 400 V – 50Hz Power: 17 kW Roll diameters: 300 – 650 mm Kdjdjt N T A Iepfx Abvsl Roll widths: 1270 – 2750 mm Machine dimensions (LxWxH): 4690 x 2100 x 3000 mm Weight: 5.5 tonnes

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, spaudimo jėga: 40 t, Gamintojas: HSM Modelis: HL 4010 Kodox D U N Sspfx Abvjdl Pagaminimo metai: 2012

Būklė: geras (naudotas), Gamybos metai: 2013, Compression force: 548 kN The size of the loading aperture is 1,195 x 650 mm Bale weight depending on material up to 480 kg Tying with 4 x strapping bands or 4 x wires Bale dimensions: 1,200 x 780 x max. 1,200 mm Dimensions: 1,797 x 1,062 x 2,985 mm Kedpfxettav Ns Abvedl Equipment weight: 2,030 kg

Būklė: Defektas atsarginių dalių laikiklis (naudotas), Gamybos metai: 2013, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2013 The equipment is incomplete and is being sold for parts. Defects: Hydraulic pump missing Kdedsur Ravspfx Abvjl Control unit missing Power supply missing

Būklė: geras (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, Pressing force: 548 kN Loading opening dimensions: 1,195 x 650 mm Bale weight depending on material: up to 480 kg Binding with 4 x strapping bands or 4 x wires Bale size: 1,200 x 780 x max. 1,200 mm Dimensions: 1,797 x 1,062 x 2,985 mm Kodpfjttal Aex Abvodl Equipment weight: 2,030 kg