Hobis pirkti naudotą (33)

Sąlyga: labai geros būklės (naudotas), Gear cutters, module cutters, hobbing cutters, gear profile cutters, module cutter heads, end mills, cylindrical cutters, milling cutters, gear hobs, spline hobs, gear hobbing cutters, Stollen hobs, rack cutters - Manufacturer: Fette, Stollen hobs, 7 pieces Pgodpfx Afjv D Dn Uj Njg - Type: Mod.1.75 EW 20° see photos - Arbor: Ø 32 mm - Price/Packaging: complete set - Shipping dimensions: 350/190/H120 mm - Total weight: 22.2 kg

Sąlyga: labai geros būklės (naudotas), Gear cutters, module cutters, hobbing cutters, gear form cutters, module cutter heads, cylindrical end mills, cylindrical cutters, cutters, hobs, spline hobs, gear hobs, roughing hobs, rack cutters - Manufacturer: Fette, hobs (roughing hobs), 7 pcs - Type: Mod.4 R1 EW 20°, see photos Pgsdev D D I Uspfx Af Njg - Bore: Ø 32 mm - Price/sale: as a complete set - Shipping dimensions: 370/190/H110 mm - Total weight: 18 kg

Sąlyga: geras (naudotas), Gear cutter, module cutter, hobbing cutter, involute gear cutter, module milling head, side and face milling cutter, cylindrical cutter, milling cutter, gear hob, spline hob - 1x cutter: Ø 52/170 mm - Bore diameter: 22 mm - Weight: 2 kg Pgjdpfjb A Srnsx Af Nsg

Sąlyga: geras (naudotas), Gear cutter, module cutter, hobbing cutter, gear form cutter, modular milling head, cylindrical face mill, cylindrical mill, milling cutter, gear hob, spline shaft hob -1x cutter by: 650.054.06 A SPAN. < 5° EV 4 CO -Diameter: 22 mm -Weight: 0.6 kg Psdeb A Srispfx Af Negg

Sąlyga: geras (naudotas), Gear cutter, module cutter, hob cutter, involute gear cutter, module milling head, slab milling cutter, cylindrical milling cutter, milling cutter, gear hob, spline shaft hob - Diameter: 63 mm - Height: 40 mm Pgodpeb A Rcgsfx Af Neg - Bore: 22 mm - Quantity: 2x cutter clamping disc 650.054.06A SPAN. 5° EV4CO - Price: complete - Sale: only as a complete set - Weight: 1.5 kg

Sąlyga: geras (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 26KL29053, pjovimo aukštis (maks.): 85 mm, pjūklo disko skersmuo: 250 mm, obliavimo plotis: 310 mm, X ašies padavimo greitis: 6 m/min, obtotalinė obliavimo stalų ilgis: 1 250 mm, bendras plotis: 1 100 mm, bendras ilgis: 2 100 mm, bendras aukštis: 860 mm, įvesties srovės tipas: trifazis, brūsų stalo ilgis: 1 250 mm, ekstrakcijos antgalio skersmuo: 30 mm, pjovimo ilgis: 2 000 mm, aukščio reguliavimo tipas: mechaninis, bendras svoris: 465 kg, stalo ilgis: 2 000 mm, drožlių pašalinimas: 2 mm, drožlių nuėmimas paviršiaus apdirbimui (maks.): 2 mm, stalo plotis: 310 mm, obliavimo peilių skaičius: 51, šlifavimo tvoros ilgis: 100 mm, pjovimo ilgis (maks.): 2 000 mm, įėjimo įtampa: 380 V, darbinio aukščio: 860 mm, darbinis plotis: 100 mm, stalo aukštis: 860 mm, galia: 3 kW (4,08 AG), Mašina buvo naudojama tik vieno asmens hobiui. Ji visiškai veikianti. Papildoma įranga: Silent Power spiralinis peilių velenas (obliavimo staklės), storio obliavimo mašinos aukščio reguliavimas ratuku su integruotu indikatoriumi, 2 m pjūklo vežimėlis. Kalbu vokiškai/ungariškai. Pjdpfx Afjxw R Ane Negg

Sąlyga: naudotas, Gamybos metai: 2007, Siemens Sinumerik 840 D CNC Control Weight 57,000 kg Operating Voltage 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 For hobbing cylindrical and worm gears as well as all other hob-capable profiles and shapes regularly occurring on cylindrical workpiece surfaces. Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing operations on cylindrical gears for numerous industries: wind power plants, industrial gear units, mining and shipbuilding, gear manufacturing, and more. The machine's drive power range is designed to accommodate future tool developments. The gear hobbing head drive is, of course, backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. The machine can be used for both dry and wet machining and is equipped with the corresponding chip conveyor for both operating modes. The machine is fitted with an internal profile milling head as a motor-driven milling head. --> Working Range and Technical Data Workpiece nominal diameter: 2,400 mm Maximum hobbed diameter approx.: 2,800 mm Minimum/maximum distance between cutter and workpiece axis: 100/1,200 mm Maximum axial slide travel (custom version): 1,300 mm --> Maximum Clamping Capacity for Cutter (Internal Milling Head): Maximum diameter: 440 mm Maximum cutter width: 90 mm Swivel range of internal profile milling head / vertical axis: +/- 15° Cutter arbor taper: HSK-B160 Maximum cutter shifting travel: 300 mm Table diameter: 2,500 mm Indexing gear diameter: 2,200 mm --> Table Bore: Diameter: 800 mm Depth: 875 mm Maximum table load approx.: 40,000 kg Podpfx Ajwzyp Ijf Nogg --> Max. Feed and Rapid Traverse Rates: Axial (Z-axis): 4,000 mm/min Radial (X-axis): 3,000 mm/min Tangential (Y-axis): 3,000 mm/min --> Cutter Coolant System/Electrocentrifugal Pump: approx. 150 l/min Discharge height, magnetic chip conveyor raised: 1,600 mm Raised main column: 1,300 mm axial slide travel --> Internal profile milling head as motor-driven milling head in place of standard motor-driven head --> Max. profile depth machinable in steel (approx. 600 N/mm² tensile strength): approx. 65 mm Cutter speed infinitely variable: 50 - 150 rpm Max. cutter diameter: 440 mm Min. cutter root diameter: 310 mm Max. cutter width: 90 mm Min. internal diameter at 0° helix angle: 800 mm+ Max. workpiece height at 0° helix angle: 600 mm Max. workpiece ring thickness (incl. clamping device): 500 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, Attention! Please do not use the pre-formatted inquiry field on Machineseeker; instead, enter your own questions in this field. Please complete the inquiry field independently. Only in this way will you receive a response. - As-new container facility – year of manufacture: 2019 – in good condition This container facility is ideally suited as an office space, training room, for temporary or permanent use. - Dry, sealed, clean - 225 sqm area - Year of manufacture: 2019 - Good condition – minimal signs of use/installation - Consisting of 11x containers, 1x sanitary container for ladies/gents, 3x corridor containers - Electrical system – VDE 400V/32A/5-pole - Structural calculations available - Good insulation values Floor: 60mm, Wall: 60mm, Roof: 100mm Dimensions per container: Length: 6.00 m Width: 2.50 m External height: 2.80 m Internal height: 2.54 m Corridor containers: Length: 6.00 m Width: 2.50 m External height: 2.80 m Internal height: 2.54 m Equipment: - Cement-bonded floor panels - Plastic windows with double glazing - Manual roller shutters - 3x toilets – ladies - 1x washbasin - 2x toilets – gents - 2x urinals - 1x washbasin - 1x sink - Electric heating - Mini kitchen with refrigerator, hob, stainless steel sink - Heaters, convectors - Sealing gaskets Pgjdswctdzjpfx Af Nog - Container clamps Loading and transport can be offered optionally. Only serious and legitimate inquiries including your name, email address, and telephone number will be answered.

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, ratlankio skersmuo: 130 mm, ruošinio aukštis (maks.): 170 mm, TECHNICAL DETAILS Control: Sinumerik 840D Head circle diameter: 80 mm Pedsv I Tmuepfx Af Njgg Toothed length: 170 mm Total hob length: 245 mm Collet chuck diameter: 32 mm Tool speed: 300 - 3000 rpm Wheel diameter: max. 130 mm Wheel width: 170 mm Module: 0.5 - 3 Slide travels radial / tangential / axial: 200 / 170 / 250 mm Milling head swivel angle: ± 45° Workpiece tables: Ø 168.14 mm Bore: 65.532 mm Table speed: 0 - 1000 rpm Table bore: 65.532 mm Feed rate X/Z: 1 - 6000 mm/min Rapid traverse X, Z / Y: 6 / 5 m/min MACHINE DETAILS Total power requirement: 48 kVA Operating voltage: 3 x 400 V, 50 Hz Machine weight: approx. 9 t Space requirements: approx. 7.64 x 3.14 x 3.25 m

Sąlyga: geras (naudotas), Gamybos metai: 1991, Machine weight approx. 6 t The base machine design is characterized by the following features: - Horizontal orientation of the workpiece spindle; vertical orientation of the milling spindle or milling head - Workpiece clamping is between the workpiece spindle head (left) and the tailstock (right) - The radial slide is mounted on the machine base (X-axis) - The axial slide travels on the radial slide (Z-axis) - The shift milling head is equipped with automatic angular adjustment (A-axis); the shift slide (Y-axis) moves tangentially to the workpiece diameter - CNC controlled Pgsdpfx Aoub Amfsf Nog - IBH control system - Loading device - Extensive accessories Technical specifications: - Maximum module for gear hobbing with hobs according to DIN 8002: 4.5 mm - Maximum module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - Maximum workpiece diameter with manual loading: 200 mm - Maximum workpiece diameter with automatic loading: 150 mm - Maximum workpiece length: 400 mm - Maximum / minimum cutter diameter: 102/40 mm - Maximum cutter length: 230 mm - Maximum / minimum cutter arbor diameter (standard): 32/16 mm - Axial slide travel = maximum milling length, Z-axis: 300 mm - Radial slide travel, X-axis: 140 mm - Cutter traverse (shift travel) Y-axis: 100 mm - Tailstock travel W-axis: 420 mm - Swivel angle shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 100 - 150 mm - Y-axis (milling spindle face): 50 - 230 mm - W-axis (tailstock spindle face): 165 - 585 mm - Cutter speed range, standard B-axis: 0 - 1500 rpm - Workpiece speed, C-axis: 0 - 350 rpm Feed rates: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (portal loader): 80,000 mm/min

Sąlyga: naudotas, Gamybos metai: 1989, Wheel diameter – max. 400 mm Wheel width: 275 mm Module – max. 6 Machine dimensions: 300 x 330 x 245 cm Machine weight: approx. 5.5 t Specification: Pgodpfx Aju A I Elsf Nog Maximum wheel diameter: 400 mm Min. module: 1 Max. module: 6 Table diameter: 370 mm Maximum wheel diameter: - with counter support: 340 mm - without counter support: 400 mm Max. axial offset: 275 mm Max. tangential adjustment: 100 mm Tooth helix angle: 45 degrees Maximum cutter diameter: 145 mm Maximum hob length: 170 mm Hob spindle speed range: 63–180 rpm Steplessly adjustable axial feed: 0.2–10 mm/rev Steplessly adjustable tangential feed: 0.1–5 mm/rev Radial feed for spur gears: 0.1–4 mm/rev Radial feed for worm gears: 0.025–1 mm/rev Rapid traverse axial: 500 mm/min Rapid traverse tangential: 250 mm/min Radial rapid traverse for spur gears: 400 mm/rev Radial rapid traverse for worm gears: 100 mm/rev Motor power: 7.4 kW

Sąlyga: naudotas, Gamybos metai: 1995, Wheel diameter - max. 80 mm Wheel width 120 mm Module - max. 3 Module - min. 1 Control: SIEMENS 840 C Total power requirement: 30 kW Machine weight approx. 7,500 kg Footprint approx. [space missing] m LIEBHERR CNC-controlled gear hobbing machine Type: LC 82 Year of manufacture: 1995 # 0836 --- Wheel diameter max. 80 mm Module 1 – 3 Helix angle +/- 45° Distance table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shift range/tool traverse: 180 mm Min. number of teeth: 3 Cutter Ø x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feeds in axial/radial/tangential: 20/4/5 mm/rev Max. workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW - 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special equipment: Pgodpfx Afjt Hw R Dj Nsg • SIEMENS CNC control type 840 C for 6 axes (i.e. cutter drive/Table drive/Swivel angle of the milling head/axial feed/radial feed/tangential feed) with gear-specific user interface and diagnostic functions for rapid troubleshooting. • With device for automatic insertion of the hob into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading unit SSL = quick swivel loader using a mechanical step transmission and cam disk for fast loading times, with 3-way rotary gripper for blank gripping/working position/unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinions) • Workpiece feeding by means of plate chain conveyor (PKB) for workpieces with positive-fit carrier. Additional feed belt for raw and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete working area enclosure with sliding door and oil mist extraction, etc. The machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact design! Delivery: ex-stock – as inspected Payment: net cash – on receipt of invoice

Sąlyga: naudotas, Gamybos metai: 1975, Wheel diameter – max. 160 – 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Required space approx. m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Lead Inspection Type: PFSU 1600 Year of manufacture: 1975, modernized in 1995 # B 2281 Working range: Min./max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Max. gear width: 250 mm Probe carriage stroke approx.: 300 mm Max. helix angle: 0 – 90° Max. workpiece length between centers: approx. 1,150 mm Tailstock offset: 450 mm Chart recorder magnification: 50/250/500/1000 x Max. test gear weight approx.: 4,000 kg Weight approx.: 3,000 kg Total drive: approx. 1 kW – 380 V – 50 Hz Suitable for testing: – Gear profile (involute) – Tooth direction (helix angle/lead) on internal and external gears, hobs, gear shaper cutters, and worms, etc. – Gear runout, surface roughness – Determination/reconstruction of the base circle and helix angle, etc. Accessories / Special features: – Optical base circle and angular setting, no base circle discs required anymore Pedpfx Afet Hwpto Njgg – High workpiece weight achievable by design; motorized and manual operation via handwheels – Rotating index table, Ø 480 mm, for setting up larger gear bodies with 2 sets of different extension supports (400 mm and 470 mm long) for gear diameters up to max 1,600 mm – Counter-support AV 17 for max. workpiece length between centers of 1,150 mm – Separate electrical cabinet for controlling manual movements – Includes GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German; program update to the current version V 21.17 available; ideal for creating modern inspection reports with graphics, also visually displayed on monitor; other subprograms, HP printer, flat-screen monitor – Various probe inserts, small parts, as well as height-adjustable mount for a pitch inspection device (device not included, but mounting available and rear-mounted), leveling feet, etc. Condition: Very good – ready for demonstration; professionally dismantled and assembled.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 27498, padavimo ilgis X ašis: 230 mm, padavimo eiga Y ašimi: 170 mm, padavimo ilgis Z ašis: 400 mm, krumpliaračio skersmuo: 130 mm, veleno greitis (maks.): 1 200 aps./min, TECHNICAL DETAILS Wheel diameter: max. 130 mm Wheel width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Swivel angle of work spindle: ±45° Tool change swivel angle: 90° Workpiece Maximum module (in steel with approx. 600 N/mm²): 4 Maximum outside diameter (not machinable): 480 mm Minimum machinable number of teeth: 3 Tool Maximum hob diameter: 130 mm Maximum cutter length (depending on arbor diameter): 220 mm Arbor diameter: 16 / 22 / 27 / 32 mm Arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-axis travel: 230 mm Y-axis travel: 170 mm Z-axis travel: 400 mm Spindle Infinitely variable cutter speed: 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control CNC control: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Required space: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Machine connected load: approx. 56 kVA EQUIPMENT - CNC control Bosch CC 220 Pgedpfx Aewc Tduef Nog - Infinitely variable cutter speed control - Large travel range on all axes - High flexibility due to wide module range

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1981, Funkcionalumas: visiškai funkcionalus, VEB Fritz Heckert ZFWVG 250×2000 Maximum workpiece length: 2,000 mm Maximum workpiece diameter: 250 mm Accessories include: second milling head, hob cutters in various modules, steady rests, clamping devices, etc. Pgsdpfx Afjw Dvane Nsg

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2003, MAZAK INTEGREX 200 III-ST – Fräs-Drehzentrum CNC-Steuerung: Mazatrol 640 MT PRO Baujahr: 2003 Betriebsstunden: 87.613 h Max. Drehdurchmesser: 660 mm Achsenwege: X: 580 mm X2: 150 mm Z: 1.045 mm Z2: 1.010 mm Y: +/- 80 mm W: 1.050 mm Hauptspindel: Leistung: 22 kW max. Drehzahl: 5.000 U/min Spannfutter: Kitagawa BB208 (210 mm) Stangendurchlass: 65 mm Gegenspindel: Leistung: 18,5 kW max. Drehzahl: 5.000 U/min Spannfutter: Kitagawa BB-208 (210 mm) Stangendurchlass: 65 mm Frässpindel: Leistung: 18,5 kW max. Drehzahl: 12.000 U/min Pgodpfx Ask D Ez Isf Neg Werkzeugmagazin-Kapazität: 40 x KM63 (120 Werkzeuge KM63 im Lieferumfang der Maschine) Untere Revolverstation: 9 Werkzeuge Späneförderer: Mayfran Consep B-Achsen-Schwenkung für Drehwerkzeuge Flash-Werkzeuge HOB 5 simultane Achsen C-Achse auf Haupt- und Gegenspindel Schnittstelle für Stangenlader Spindel neu – ersetzt durch MAZAK am 06/2022 Die Maschine kann im Betrieb in Frankreich (nahe der belgischen Grenze) besichtigt werden.