Hidraulinis Vairalazdė pirkti naudotą (4 904)

Būklė: naudotas, Gamybos metai: 1982, Technical details: Dcjdpfxsu Nfmyj An Hsh Pressure: 16 t Stroke: 250 mm Throat depth: 270 mm Installation height: approx. 400 mm Table dimensions: 800 x 500 mm Bore diameter: Ø 50 mm Ram surface: 220 x 360 mm Ram pin hole diameter: Ø 40 mm Table height above floor: 970 mm Operating voltage: 380 V / 50 Hz Control voltage: 220 V / 50 Hz Total power requirement: 3.0 kW Machine weight approx.: 2.3 t Machine dimensions approx. LxWxH: 1.8 x 1.5 x 2.72 m High-Speed Hydraulic Press Press frame made from rugged welded steel construction. Operating mode selectable via switch: jog, two-hand, foot pedal, or continuous operation with feed. The press features a piece counter on the side. EMERGENCY STOP switch With stroke limitation Press force adjustable With overload protection (pressure relief valve) With cutting impact damping SICK optical safety light curtain is pre-installed (can be reactivated as an option) *

Būklė: naudotas, Technical Details: Pressing force: 40 t Throat depth: 365 mm Distance table/ram: 800 mm Ram stroke – max.: 500 mm Ram return speed: 0.45 m/sec Ram advance speed: 0.10 m/sec Ram surface: 450 x 360 x 74 mm Table surface: 630 x 500 x 73 mm Table through opening: Ø 205 mm Table height above floor level: 720 mm Total power requirement: 13.0 kW Machine weight approx.: 3.2 t Machine dimensions approx. LxWxH: 1.7 x 1.1 x 3.0 m Dodpfxsu Nfuqj An Hech Additional technical features: - Overrun time: 443 ms - Overrun distance: 9 mm - Last machine inspection: May 2020, valid for 1 year

Būklė: naudotas, Gamybos metai: 1976, Technical specifications: Tank capacity: 35 l Engine: 1.1 Delivery rate: 12 l/min Dsdpfeu N E Idox An Hjch Pressure output: approx. 24.5 bar Total power requirement: approx. 1.2 kW Dimensions (L x W x H): 0.7 x 0.9 x 1.2 m For testing hydraulic systems Flow rate: 1420 l/min.

Būklė: naudotas, Gamybos metai: 2005, Technical details: Dcedpsu N E Nusfx An Hoh Total power requirement: 6.4 kW Machine weight approx.: 250 kg Dimensions (L x W x H): 1.4 x 0.9 x 1.4 m 2x METERING UNITS Further technical specifications: - System pressure: 125 bar - Delivery rate: 3 l/min - Accumulator pre-charge pressure: 80 bar - SEW Eurodrive motor, 1410/1710 rpm Equipment: - Hydraulic tank with 200-litre capacity, size L:850 x W:630 x H:380 mm - Oil sump, size L:1100 x W:850 x H:380 mm

Būklė: naudotas, Technical Details: Tank capacity: 250 l Overpressure: - bar Engine: - Dimensions L x W x H: on request m 5 units available for sale. Unit No. 1 + No. 2 + No. 6: Dcsdpou N E N Iofx An Hsh Features: Max. operating pressure: 150 bar, Connection Ø external 30; 45; 52mm, Capacity 250 liters, Nitrogen content 20 liters Pressure 90 bar Unit No. 4 Features: Operating pressure: 160 bar, Connection Ø external P2=30; P1=45; T=52; L=26mm, Capacity 250 liters, Nitrogen content 2x 10 liters Pressure 54 bar Unit No. 7 Features: Year of manufacture: 2001, Operating pressure: 100 bar, Connection Ø external P2/P3=26, P1=22; L=36mm, Capacity 160 liters, Nitrogen content 10 liters Pressure 90 bar

Būklė: naudotas, Gamybos metai: 2001, Technical Details: Pressure: max. 275 bar Stroke length max.: 600 mm Weight: 1.5 t Dimensions L x W x H: 2.8 x 0.6 x 0.6 m Application: HYDRAULIC WORK CYLINDER - Outer cylinder dimensions: Ø = 300 x 830 mm - Working cylinder outer dimensions: Ø = 360 x 750 mm - Stroke cylinder Ø = 160 x 600 mm Dsdpfx Asu N E Rfjn Hsch Equipment: - One hydraulic connection 1/2" - Two mounting flanges (490 x 490 mm) - Four supports (Ø = 60 x 800 mm) - Two sheet metal covers for flanges 600 x 600 x 80 mm

Būklė: naudotas, Technical details: Pressure: 0.9 t Dcjdpfsu Nfw Sox An Heh Installation height: table/ram top: 350 mm Throat depth: 295 mm Ram diameter: 40 mm Table size: 600 x 330 mm Height above floor: 935 mm Approx. machine weight: - t Approx. machine dimensions (LxWxH): 1.2 x 0.8 x 2.1 m Ram holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, Type 1E1 HS299, Pressure 38 bar, Tank capacity approx. 50 liters One-hand operation

Būklė: naudotas, Gamybos metai: 1981, Technical Details: Pressure: 30 t Column gap (WxD): 600/450 mm Installation height table/ram top: 650 mm Ram stroke: approx. 600 mm / highspeed strokes Table surface (LxW): 500 x 700 x Ø 60 mm Ram clamping surface: 650 x 800 mm Hydraulic pressure: 170 bar Required air pressure: 4 - 6 bar Total power requirement: 11 kW Machine weight approx.: 2.0 t Machine dimensions approx. (LxWxH): 1.26 x 1.75 x 3.4 m Dedpeu Nfmaefx An Hech Four-column press, hydraulic Trimming press Possible application: suitable for use as a deburring press Additional technical features: - Table opening 200x250 mm - Ram opening Ø 160 mm - Column clearance width 600 mm, depth 450 mm - Operation via control panel Equipment: - Safety guard - Base plates

Būklė: naudotas, Gamybos metai: 1995, Technical details: Sheet width: 3000 mm Sheet thickness: 12 mm Frame gap: 3500 mm Control: Cybelec DNC 10 G Backgauge: 1200 mm, motorized Cutting angle: 1.2 - 2.73° Blade gap adjustment: Yes Shear force: 66,000 daN Blade length: 3100 mm Hold-down clamps: 17 units Interface: RS232 Table size: 3200 x 600 mm Total connected load: 22 kW Machine weight approx.: 11.0 + (1.0 t for attachments/accessories) t Space requirement (LxWxH): approx. 4.5 x 2.6 x 2.1 m Transport dimensions (LxWxH): approx. 5.0 x 2.25 x 2.2 m The guillotine shear was commissioned for the first time in 1998. Dcodpfx Ansvc Amtj Heh The DNC 10 G control system was specifically developed for guillotine shears. It features a numerical axis for controlling the backgauge and automatically calculates and adjusts the blade gap, cutting angle, and cutting depth based on the material to be cut (manufacturer’s information). Table with side stop L: 930 x W: 105 x H: 42 mm 2 table extensions L: 1600 x W: 100 x H: 83 mm Angle stop (mounted on table extension) Operation via control panel with swiveling arm and foot pedal Equipment: Discharge table with rollers for cut material 2x safety guards

Būklė: naudotas, Gamybos metai: 2001, Techniniai duomenys: Spaudimas: 250 t Išsikišimas: 360 mm Dsdsxna Uzspfx An Hsch Atstumas tarp stalo ir stūmoklio: 800 mm Maksimalus stūmoklio eiga: 500 mm Stūmoklio grįžimo greitis: 390 mm/sec Stūmoklio eigos greitis: 450 mm/sec Hidraulinis slėgis: 280 bar Prisijungimo galia: 43 kW Darbinis greitis: 11–50 mm/s Darbinis slėgis: 20 MPa Bendras energijos poreikis: 20,5 kW Mašinos svoris apie: 17 t Mašinos matmenys (Ilgis x Plotis x Aukštis): apie 3,9 x 1,9 x 4,0 m

Būklė: naudotas, Technical details: Press force: 315 t Bending length: 5050 mm Distance between uprights: 4100 mm Throat depth: 500 mm Stroke: 250 mm (ram) Control system: DNC 884s Machine weight (approx.): 27.0 t Machine dimensions (LxWxH): 5.7 x 2.2 x 4.0 m The machine is installed approx. 0.95 m below floor level. Application: Coining and air bending Operation via DNC control is possible in manual, semi-automatic, and automatic modes. Maximum gap between table and upper ram: 490 mm Table: with extension approx. 800 mm, table tooling mount = 30 mm dovetail Dcsdpfx Asu Iccpjn Hoh Accessories: Numerous dies and punches as shown in the picture (comparable) In stock.

Būklė: naudotas, Gamybos metai: 1990, Techninės detalės: Spaudimas: 100 t Lenkimo ilgis: 3100 mm Statramsčių tarpas: 2630 mm Programos valdymas: CNC valdymas CYBELEC Maks. eiga: apie 215 mm Iškyša: 255 mm Įrengimo aukštis: 410 mm Greita judėjimo greitis: 100 mm/sek. Dcsdpfx Aneu Icdao Heh Darbinis greitis: 6,5 mm/sek. Galinė atrama: 500 mm varoma varikliu Stalo dydis: 3100 x 60 mm Darbo aukštis: 890 mm Prijungimo įtampa: 3x380 V / 50 Hz Bendras galingumo poreikis: 5,5 kW Mašinos svoris apytiksliai: 7,9 t Mašinos matmenys (I x P x A): apie 3,8 x 1,5 x 2,5 m 500 mm galinė atrama, 2570 mm pločio; 2 atremtuvai rankiniu būdu reguliuojami per visą plotį. Valdymas per valdymo pultą ir/arba valdymo stotį dviem rankomis/pedalu. Valdymas taip pat įmanomas per rankinį valdymo įrenginį. Įskaitant priedus. Sandėlyje.

Būklė: naudotas, Gamybos metai: 1989, Technical details: Pressing force: 100 t Bending length: 2600 mm Frame gap: 2300 mm Throat depth: 300 mm Control for program: CNC control DNC7000 Installation height: 830 mm Max. stroke: 265 mm Approach speed: 80 - 100 mm/sec Backgauge: motorized Table size: 2700 x 113 mm Working height: 900 mm Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: 11.3 t Machine dimensions LxWxH: approx. 3.2 x 3.8 x 3.0 m 3-point bending – profile bending with Cybelec DNC-7000-PSGHY -Hydraulic cushion (for continuous force adjustment along the entire working length) -Backgauge: width 2200 mm, 2x supports with travel path 1800 mm and 4x stops, travel path W:2550 x L:860 mm Dcodpju Icdmsfx An Heh -Operator controls: Swiveling control panel on boom and/or control console with two-hand and foot operation -Programmable logic controller TSX21 Sufficient quantity of press brake tools included In scope.

Būklė: naudotas, Gamybos metai: 1997, Technical details: Pressing force: 160 t Column gap: 1000 mm Stroke: 250 mm Installation height: 600 mm Distance between table and ram: 600 mm Table height above floor: 550 mm Table surface: 810 x 860 mm Ram clamping surface (D x W): 720 x 580 mm with T-slots Total power requirement: 15 kW Approx. machine weight: 16.0 t The machine is not yet assembled. Pictures from the storage site. Further features: - Lateral opening (W x H): 520 x 620 mm Dsdpfx Aou Nfmmsn Hsch - Front opening (W x H): 660 x 600 mm Equipment: - Walk-on platform = height above floor approx. 2400 mm; platform approx. 2700 x 2600 x 1050 mm - Hydraulic power unit - Oil cooler as per standard.

Būklė: naudotas, Gamybos metai: 1978, Technical Details: Pressure: 160 t Dcedpfx Asu Nfq Een Heh Max. ram stroke: 500 mm Distance table/ram: max. 2880 mm Ram advance speed: 0.03 m/sec Ram return speed: 0.04 m/sec Ram area: W: 1720 x H: 1000 mm Ram diameter: Ø 259 mm Ram bore (center hole): Ø 180 mm Operating pressure: 260 bar Total power requirement: 11.0 kW Approx. machine weight: 18.8 t Approx. machine dimensions (LxWxH): 7.5 x 1.6 x 1.6 m HYDRAULIC HORIZONTAL MULTIPURPOSE PRESS TÜV inspection valid until 02/2024 Counter bearing specifications: Size (W x H): 1720 x 690 mm Counter bearing U-mount = Ø 225 mm x depth = 450 mm Manual horizontal adjustment: length max. 2880 mm Guide cylinder specifications: 2 opposing cylinders; size Ø 230 mm x length 3350 mm, 7 cylinders divided by adjustment slot Ø 170 x 50 mm, manually repositionable with adjustment ring Bed specifications: Steel construction, welded with 2 guide slots 20 mm; size (LxWxH): 4000 x 1400 x 200 mm

Būklė: naudotas, Technical details: Lifting height: 90–800 mm Load capacity: 500 kg Table length: 1415 mm Table width: 860 mm Total power requirement: 1.1 kW Approximate machine weight: - t Dimensions (L x W x H): 1.45 x 0.9 x 0.9 m Transport dimensions (L x W x H): 1.45 x 0.9 x 0.2 m Dodpfx Anou Nk Amo Hsch Operation via control stand: Up/Down and Emergency Stop Hydraulics: HAWE make, connected via bayonet coupling, flow rate 1.14 l/min at 400 bar pressure

Būklė: naudotas, Technical details: Pressing force: 6 t Distance between uprights: - mm Stroke: 130 mm Table size: 1200x550x30 mm Throat depth: 500 mm Total power requirement: 1.1 kW Machine weight approx.: 1000 kg Required floor space approx.: L:1.8xW:0.9xH:0.9 m HORIZONTAL SSE - Operation via keypad - Operating pressure infinitely adjustable from 10 to 600 bar - Workpiece clamping area is adjusted manually by moving the ram counter-holder plate via screw fastening - Dimensions of the ram counter-holder plate L:500xW:300xH:35 mm - Ram plate stroke: 130 mm - Ram clamping plate: 550x300x35 mm Dcsdpou Nfm Tefx An Hoh The machine is available for demonstration.

Būklė: naudotas, Technical details: Pressure: 63 t Frame opening: 900 mm Strokes per minute: approx. 75 spm Ram adjustment: 80 mm Adjustable stroke range: 3–100 mm Table size: 900 x 600 mm Throat depth: 310 mm Installation height: max. 350 mm Drive power: 11 kW Voltage: 380/220/24 V Dcedpfx Anou Nfnks Hjh Frequency: 50 Hz Operating pressure: approx. 150 bar Oil capacity: 500 l Safety distance: 150 mm Pass-through opening in table: 200 mm Total power requirement: 11 kW Machine weight approx.: 4.0 t Space requirements approx.: L: 1.8 x W: 1.8 x H: 3.7 m DIFFERENTIAL TRAVEL PRESS HIGH-SPEED PRESS - High-performance high-speed press, C-frame design - Pneumatic connection: approx. 5 bar WITHOUT control cabinet!

Būklė: naudotas, Techninės detalės: Bako talpa: 60 l Variklis: 1430 Svoris: 100 kg Matmenys I x P x A: 0,85 x 0,45 x 0,85 m Kitos techninės detalės: Dcsdpfou N E I Rjx An Hsh - Apsisukimai: 1 430 aps./min. (siurblys) - Hidraulinė jungtis: 3/4" - Alyvos karterio I x P x A: 810x430x40 mm vidiniai matmenys.

Būklė: naudotas, Techniniai duomenys: Slėgis: 40 t Stovo plotis: - mm Eiga: 500 mm Dsdow Smukopfx An Hech Išsikišimas: 360 mm Atstumas tarp stalo ir presavimo galvos: maksimaliai 800 mm Montavimo aukštis stalas/presavimo galva viršuje: 600 mm Presavimo galvos eiga: 500 mm Presavimo galvos eigos greitis pirmyn: 0,100 m/s Presavimo galvos grįžimo greitis: 0,450 m/s Stalo matmenys: 750 x 500 mm Stalo perėjimas: 200 mm Presavimo galvos tvirtinimo paviršius: 360 x 450 x 72 mm Kaiščio skylė presavimo galvoje: 40 x 75 mm Aukštis virš grindų: 700 mm Bendras galios poreikis: 13 kW Mašinos svoris apie: 3,2 t Mašinos matmenys apytiksliai Ilg x Pl x Aukšt: 1,75 x 1,15 x 2,95 m

Būklė: naudotas, Gamybos metai: 1991, Techniniai duomenys: Spaudimas: 2000 t Lenkimo ilgis: 4100 mm Valdymas: - Atstumas tarp stulpų: 3200 mm Didž. eiga: 250 mm Bendras galios poreikis: 22 kW Darbinis slėgis: maks. 280 bar Stalo plotis: 200 mm Eigos greitis - aukštyn be apkrovos: 100 mm/s Eigos greitis - žemyn be apkrovos: 100 mm/s Dcedpjy Alw Hefx An Hoh Mašinos svoris apie: 18 000 t Mašinos matmenys: 5,0 x 2,7 x 3,0 m

Būklė: naudotas, Gamybos metai: 1993, Technical details: Sheet width: 3,150 mm Sheet thickness: 13 mm Frame gap: 3,670 mm Blade length: 3,150 mm Hold-downs: 18 units Backgauge: motorized, 1,000 mm Height above floor: 850 mm Dcjdpfou Icnfex An Heh Operating hours: 3,256 Table size (LxW): 3,770 x 500 mm Total power requirement: 30 kW Machine weight approx.: 12.9 t Machine dimensions: 4.4 x 2.8 x 2.4 m Short-stroke mode Continuous operation Cutting gap illumination Hydraulic sheet lifting device Rear light curtain Positionable backgauge

Būklė: naudotas, Technical details: Sheet width: 400 mm Max. stroke: 600 mm Djdpfx Anju Iczfo Hech Control: external Approx. machine weight: 0.4 t Dimensions (L x W x H): 2.7 x 0.8 x 0.62 m Hydraulic sheet feed unit, strip feeding device External control in conjunction with processing machine. - Feed length approx. 800 mm - Infeed height approx. 500 mm - Motorized/hydraulic operation Sale as described.

Būklė: naudotas, Gamybos metai: 2004, Technical details: Throat depth: 510 mm Operating pressure: 250 bar Punching force: 1000 kN t Round steel: up to Ø 65 x 12 and up to Ø 90 x 8.5 mm Electrical connection: 400V / 50Hz Total power requirement: 7.5 kW Machine weight approx.: 2.6 t total Machine dimensions approx. (LxWxH): 1.9 x 1.0 x 2.1 m Dsdpou Ick Tsfx An Hech Tool cabinet dimensions (L x W x H): 0.7 x 0.35 x 0.9 m Heavy-duty, robust electro-hydraulic punching machine with large throat depth -Punching unit: Punch holder with quick-change device for punches up to Ø 31 mm, stripper size L: 360 x W: 300 mm -Punch table: LxW: 360 x 300 mm, punching support 360 x 300 mm with adjustment mechanism and die holder Ø 50 x 25 mm (equipped with die Ø 16 mm) Stroke rate: -at 10 mm stroke = up to 45 strokes/min. -at 30 mm stroke = up to 22 strokes/min. -at 50 mm stroke = up to 14 strokes/min. Punching stroke: min. 10 mm and max. 50 mm Stroke length and position adjustable Supplied with Ø 16 mm punch Foot switch The punching capacities refer to a material strength of 400 N/mm². Accessories: various punching tools, punches, and dies as per inventory.

Būklė: naudotas, Gamybos metai: 1992, Technical Details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame clearance: 1630 mm Blade length: 1550 mm Dsdpfxju Ib Ano An Hoch Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Max. bending angle: 93° (L-/Z-bending) and 180° for folding Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Bending capacity: 2.5 mm at approx. 400 N/mm² tensile strength Hydraulics: OILTECH with approx. 200 liters