Hermes pirkti naudotą (396)

Būklė: dilaminuotas dirbtuvėje (naudotas), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness (manual loading): 12 mm Max. sheet thickness (automatic loading): 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total connected load: approx. 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control system, OP 37 panel - Climate-controlled control cabinet - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 5 temperature control circuits via pilot emitters - Individual emitter control for both top and bottom heaters - Parallel clamping frame - Locking of upper reduction frames via pneumatic motor - Locking of lower reduction frames via cylinders - 4 cooling fans - Table vacuum adjustable via cascade circuit - Pre-blow and demolding adjustable via cascade circuit Lhodpjwf Dvaefx Agfed - Large front opening for tool change - Film sag monitoring by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping by vacuum 2. Tool change via pneumatically operated ball rollers Upper punch: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Sheet feeding: - Automatic lifting of the film transport chain by motor - Pneumatic quick-change system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional retrofit: Preheating system: - Pneumatically operated top heater, overall field control, individual emitters can be switched on/off via toggle switches - Pneumatically operated bottom heater, overall field control, individual emitters can be switched on/off via toggle switches - Temperature control of top and bottom heaters via separate controllers in the BE control cabinet (temperature setting not via operator panel of UA) Optional retrofit for roll processing: - Cross cutter and feed rollers in feeder - Roll stand RO 800

Būklė: dilaminuotas dirbtuvėje (naudotas), Sheet size: 1000 x 1500 mm Forming area: 960 x 1460 mm Ljdpfx Aowf D R Regfjhd Draw depth: 600 mm If you would like further details or a quotation, please feel free to contact us.

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, plėvelės plotis: 1 500 mm, Technical specifications: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum draw depth: 700 mm - Maximum material thickness: 12 mm Equipment: Forming station - Siemens S7 control system - Fully automatic set-up function - Upper heater with 7 pilot radiators, controlled via S7 touchscreen joystick (motorized travel) - Lower heater with 7 pilot radiators, controlled via S7 touchscreen joystick (motorized travel) - Contactless radiator control (solid state relay) - Upper plug assist system with synchronized movement (hydraulically adjustable) - Clamping frame (hydraulically adjustable) - Tool table (hydraulically adjustable) Ljdpfxsft S Eao Agfohd - Central cooling system via fresh air supply - Triple film sag control with automatic support air function - Triple tool monitoring - Automatic air box venting - Quick change system for mold, clamping frame, and plug assist as a package, fully and semi-automatic cycles - Mold tool extendable on front flap - Forming vacuum monitoring - Pre-blow automatic control via pre-blow time - Automatic basic setting with self-optimization of radiator temperatures - Heating, cooling, and process cycle times - Cycle time calculation for all expansion stages - Position measuring system for table position - Temperature control for clamping frame, upper plug assist, and tool - Storage of programs and heating settings - Lower clamping frame for frame mounting from below, central clamping via electric motor - Cascade for vacuum, pre-blow, de-moulding, tool table, upper plug assist - Adjustable speed for tool table, upper plug assist, and clamping frame - Pneumatically lockable front door - Main electrical cabinet with air conditioning Automatic sheet and roll feeding - Film unwinding rack incl. lifting device and pneumatic brake - Automatic sheet magazine centering (motorized adjustment) - Upper heater usable as pre-heater or main heater (motorized travel) - Lower heater usable as pre-heater or main heater (motorized travel) - Motorized sheet lifter - Vacuum pump for grained material - Material transport via transport chain and roller rail for improved transport, even with thin material Options available upon request

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Sheet size: 2000 x 1000 mm Forming area: 1960 x 960 mm Draw depth: 600 mm Lhsdpfswf Ebwjx Agfjd If you would like more details or a quotation, please feel free to contact us.

Būklė: naudotas, Funkcionalumas: nepatikrintas, For sale here is an Illig SB 74 D, which is suitable for skin packaging; blister packaging is not possible. Lhedjwpvbpjpfx Agfod Technical data available upon request.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, ILLIG universalus formavimo aparatas, tipas UA 155 4g solo Techniniai duomenys - Siemens valdymas - Didžiausias medžiagos dydis: 1500 x 1250 mm - Didžiausias formavimo plotas: 1450 x 1200 mm - Didžiausias įrankio aukštis: 700 mm - Didžiausias medžiagos storis: 12 mm - Šildymo galia: 96 kW - Bendra galia: 105 kW - Elektros saugiklis: 160 A Ledpfexlzqfjx Agfshd - Vakuuminio siurblio galia: 250 m³/h - Suspausto oro poreikis: 6 bar Komplektacija - Viršutinis šildymas su 5 zonų reguliavimu HTS (700ºC) - Apatinis šildymas su 5 zonų reguliavimu HTS (500ºC) - Aušinimo ventiliatorius D06 - Stalviršio kaskada - Vakuuminė kaskada - Viršutinis presavimo štampas - Įskaitant ILLIG aušinimo ir temperatūros reguliavimo įrenginį

Būklė: naudotas, Gamybos metai: 1998, ILLIG Universal Forming Machine UA 155 4G + BE 155 P FHZ Technical Specifications: - Max. material size: 1500 x 1250 mm - Max. forming area: 1460 x 1210 mm - Max. tool height: 600 mm - Max. material thickness: 12 mm Forming Station - Schleicher P03 control system - Automatic set-up and removal functions - Top heater with ceramic emitters and 5-zone control - Bottom heater with ceramic emitters and 3-zone control - Storage of programs and heating settings - Clamping frame with quick-change system - Parallel top frame, longitudinal beams for fixed-format frame use - Lower clamping frame for frame insertion from below, central clamping via electric motor - Pneumatic lower table with rapid/creep speed, steplessly adjustable Ljdpfx Agjxlzrcjfehd - Upper plug assist with rapid/creep speed, steplessly adjustable - Pre-blow automatic, steplessly adjustable - Pre-vacuum, steplessly adjustable - Automatic demoulding, steplessly adjustable - Sheet sag monitoring via light barrier with support air - 6-fold cooling blower - Large front opening for tool change - Vacuum pump Sheet Feeding - Automatic sheet feeding device - Final heating in the feeder, for final or pre-heating of sheets - Motorized sheet lifter - Motorized sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Mašina DU 1500 x 1000 x 620 T7 Nr. 98 15254 Plokštės dydis: 1000 x 800 mm Tempimo gylis: 620 mm Pagaminimo metai: 1998 Nominali srovė: 238 A Bendra prijungta galia: 164,5 kW Valdymas: Siemens OP 37 Įranga: • Įkrovimo mašina Lhjdpfx Agsxmgvcefjd • 6 aušinimo ventiliatoriai • Viršutinis antspaudas • Plėvelės įlinkio kontrolė • Motorinis reguliuojamas spaudimo rėmas • Blykstės šildytuvas • Šildymo pirometras • Aušinimo pirometras

Būklė: dilaminuotas dirbtuvėje (naudotas), Top heating with individual small radiators operated via toggle switch Bottom heating with large radiator Lhodpfxsfug Ano Agfjd Upper die system Protective grid 4 cooling fans D05 Pre-blowing and demoulding automation

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Max. forming area: 960 x 660 mm Min. forming area: 269 x 444 mm Max. sheet thickness (manual feeding): 12 mm Max. sheet thickness (automatic feeding): 10 mm Max. tool height: 450 mm Year of manufacture: 2000 Technical equipment of forming station UA 101 L: - Siemens control system with swiveling operating panel - Motorized movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 3 temperature control circuits via pilot emitters - Height-adjustable top heater Lsdpowf Dtxjfx Agfshd - Upper punch system - Parallel tensioning frame - Automatic window plate adjustment on lower frame - Automatic window plate adjustment on upper frame - Adjustable vacuum for under-table via cascade control - Pre-blow/demolding adjustable via cascade control - 4 cooling fans - Front opening for tool change, pneumatically locked - Film sag control - Film pre-blow control - Vacuum provision at upper punch - Tempering connection - Automatic tool change system for large setups - Vacuum pump Technical equipment of feeder BE 101 L: - Top and bottom preheating - Motorized movement of top and bottom heaters via swing arm - Top heater with 5 temperature control circuits via pilot emitters - Bottom heater with 3 temperature control circuits via pilot emitters - Height-adjustable top heater - Motorized parallel-lifting film transport - Film transport via pin chain - Film guidance via rollers - Automatic transport width adjustment - Motorized plate lifter with automatic tool clamping - Mobile plate loading trolley Options (price on request): - Pyrometer in top heater for temperature measurement on the film - Retrofit for roller processing

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Plate size: 1250 x 1500 mm Lhsdpfx Aowf Ea Togfod Forming area: 1200 x 1460 mm Drawing depth: 700 mm If you would like further details or a quotation, please feel free to contact us.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Technical Data: - Maximum material size: 2500 x 1500 mm - Maximum forming area: 2450 x 1450 mm - Maximum tool height: 600 mm - Maximum material thickness: 12 mm Equipment: Forming Station - Schleicher P03 control system - Automatic setup function Lhjdewf Eb Rjpfx Agfod - Top heating with ceramic emitters (500W), 4-zone control - Individually selectable top heating elements, including lowering function - Bottom heating with ceramic emitters (300W), 4-zone control - Individually selectable bottom heating elements, including lowering function - Program and heating setting memory - Clamping frame with quick-change system - Parallel top frame, longitudinal rails for use of fixed-format frames - Lower clamping frame for installation from below, central clamping via electric motor - Pneumatic lower table with fast/creep speed, adjustable in 15 stages via control panel - Top punch with fast/creep speed, adjustable in 7 stages - Vacuum pump with cascade control, adjustable in 15 stages via control panel - Pre-blow automatic function, percentage adjustable - Pre-suction, percentage adjustable - Demoulding automatic function, percentage adjustable - Sheet sag control via light barrier with support air - 8-fold cooling fan with spray nozzle cooling - Large front opening for tool change Feeding - Automatic sheet feeding system - Centering table for precise positioning of sheets in the feed - Motorized sheet lifter - Motorized sheet positioning - Motorized transport lifter - Motorized transport width adjustment

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Sheet size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Ljdpfx Aewf D S Ujgfjhd If you would like further details or a quotation, please feel free to contact us.

Būklė: naudotas, Thermostat, sensor Ledjd Ttr Hspfx Agfohd - Adjustment range: -10...+12 - Quantity: 2 available - Price: per piece - Weight: 0.7 kg

Būklė: naudotas, Compressor, refrigeration unit, cooling compressor, refrigerating unit, cooling condensing unit, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat, expansion valve, thermostatic expansion valve - Manufacturer: Alco, thermostatic expansion valve, unused in original packaging - Model: TIE-MW 55/PCN 802456 - Price: per unit Ljdefyh Dtopfx Agfohd - Quantity: 2 units - Package dimensions: 105/80/H70 mm - Weight: 0.4 kg/unit

Būklė: naudotas, Thermostat, sensor Ljdodnn Hyopfx Agfjhd - Quantity: 250 V 10 A / 24 V = 2 A - 2.0 K: 20–110 °C - 2.5 K: 20–150 °C - 5.0 K: 20–230 °C - Dimensions: 140/80/H270 mm - Weight: 1 kg

Būklė: naudotas, Frequency inverter, frequency converter, drive inverter, controller, variable speed drive, thermal system -Manufacturer: Laird, Thermal Systems thermoelectric Peltier module -Voltage: 24 VDC / 3.4 A -Cooling capacity: 71 W -Price: per unit Ljdeff Nmdopfx Agfohd -Quantity: 15 units -Dimensions: 230/120/H150 mm -Weight: 2.4 kg/unit

Būklė: naudotas, Temperature sensor, resistance thermometer, thermometer, thermocouple - Thermocouple: LC-05, unused in original packaging - Type: LC-05/NI-100 D DM Ledpfxegmuz Rj Agfshd - Quantity: 6 units available - Price: per piece - Packaging dimensions: 150/20/H20 mm - Weight: 0.1 kg/piece

Būklė: naudotas, Refrigeration compressor, chiller, cooling compressor, refrigeration unit, cooling condensing unit, compressor, filter drier housing, shut-off valve, ball shut-off valve, temperature switch, thermostat -Manufacturer: Danfoss, thermostat unused in original packaging Ledefx At Iepfx Agfohd -Type: RT7 -Temperature range: -25 to 15 °C -Price: per unit -Quantity: 3 units -Package dimensions: 275/130/H80 mm -Weight: 1 kg/unit

Būklė: naudotas, Cold compressor, refrigeration unit, cooling compressor, refrigeration aggregate, cooling compressor, compressor, filter dryer housing, shut-off valve, ball shut-off valve, temperature switch, thermostat -Manufacturer: Danfoss, Thermostat unused in original packaging Lhedpjfx At Sofx Agfsd -Type: RT14L -Temperature range: -5 to 30°C -Package dimensions: 275/130/H75 mm -Weight: 1 kg

Būklė: naudotas, Thermostat, sensor - Setting range: -10...+12°C Lhodpfxsd Ttr Ej Agfjd - Weight: 0.7 kg

Būklė: naudotas, Thermo switch, circuit breaker, electrical circuit breaker, thermal switch, temperature switch, thermostat controller Lhjdpjmt Ra Nofx Agfsd -Thermal switch: Unused thermostat controller in original packaging -Type: 662 029 160 -Quantity: 6 units available -Price: per item -Carton dimensions: 100/80/H80 mm -Weight: 0.1 kg/unit

Būklė: naudotas, Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat, sensor, -Manufacturer: Trafag, thermostat temperature switch, unused in original packaging -Type: 471 2331 342 27 8319 0065 90 -Temperature range: 20 to 150 °C -Cable length: 3000 mm -Quantity: 2 thermostats available -Price: per piece -Package dimensions: 245/130/H80 mm Ljdjlc Uiijpfx Agfohd -Weight: 1.1 kg/piece.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat, sensor, -Manufacturer: Trafag, unused thermostat temperature switch in original packaging -Type: 471 2331 342 14 -Temperature range: 20 to 150 °C Lhodpfxsvn Stte Agfjd -Sensor: cable length 3000 mm -Quantity: 1 piece thermostat available -Package dimensions: 350/140/H90 mm -Weight: 1.1 kg

Būklė: labai geros būklės (naudotas), Temperature controller, temperature sensor, temperature setting, temperature converter, temperature limiter, electronic temperature controller, temperature switch, thermostat, sensor, pressure and temperature switch -Manufacturer: Amot, unused pressure and temperature switch -Type: 4140DKIE00CE4-EE -Temperature range: 83-104°C Setting 85°C -Quantity: 2x thermostat available -Price: per piece Lodpfxjq Adpmj Agfehd -Dimensions: 200/70/H80 mm -Weight: 0.6 kg/each