Greitas Radialinės Gręžimo Mašina pirkti naudotą (45 661)
Rikiuoti rezultatus
- Žemiausia kaina Aukščiausia kaina
- Naujausi skelbimai Seniausi skelbimai
- Trumpiausias atstumas Didžiausias atstumas
- Naujausi metai gamybos Seniausi gamybos metai
- Naujausias atnaujinimas Seniausias atnaujinimas
- Gamintojai nuo A iki Z Gamintojas nuo Z iki A
- Reikšmė
- Žemiausia kaina
- Kaina
- Aukščiausia kaina
- Kaina
- Naujausi skelbimai
- Įkėlimo data
- Seniausi skelbimai
- Įkėlimo data
- Trumpiausias atstumas
- atstumas
- Didžiausias atstumas
- atstumas
- Naujausi metai gamybos
- Gamybos metai
- Seniausi gamybos metai
- Gamybos metai
- Naujausias atnaujinimas
- Atnaujinimas
- Seniausias atnaujinimas
- Atnaujinimas
- Gamintojai nuo A iki Z
- Gamintojas
- Gamintojas nuo Z iki A
- Gamintojas
- Pavadinimas nuo A iki Z
- Pavadinimas
- Pavadinimas nuo Z iki A
- Pavadinimas
- Modelis nuo A iki Z
- modelis
- Modelis nuo Z iki A
- modelis
- Žemiausia nuoroda
- nuoroda
- Aukščiausia nuoroda
- nuoroda
- Trumpiausias veikimo laikas
- Veikimo laikas
- Ilgiausia veikimo trukmė
- Veikimo laikas
- reikšmė
- reikšmė
Mažas skelbimas
Siedlce
352 km
Radialinio gręžimo staklės
CORMAKZ3032x1000
Skambinti
Būklė: naujas, Gamybos metai: 2026, Large and stable radial drilling machine with a wide range of spindle speeds, ensuring precise and fast machining.
Machine features
- High weight and rigid construction provide stability and vibration-free operation
- Box table enables easy positioning and clamping of the workpiece
- Motorized arm height adjustment
- Control panel located at the front of the drill for improved efficiency and operator ergonomics
- Ground column surface ensures smooth, easy, and precise arm movement
- Manual locking of the drilling head and column arm
- Wide speed range allows for precise and efficient machining
Technical specifications
MAX. DRILLING DIAMETER Cast Iron: 32 mm; Steel: 32 mm
SPINDLE DISTANCE TO BASE 340 - 1125 mm
SPINDLE AXIS DISTANCE TO COLUMN SURFACE 330 - 890 mm
SPINDLE STROKE 215 mm
SPINDLE TAPER MT4
SPINDLE SPEEDS (6 steps) 75, 130, 240, 380, 660, 1200 rpm
SPINDLE FEED (3 steps) 0.10; 0.16; 0.25 mm/rev
HORIZONTAL SWIVEL ANGLE 180 degrees
MAIN MOTOR POWER 2.2 kW
WORKTABLE DIMENSIONS 500 x 330 x 294 mm
MACHINE DIMENSIONS 1400 x 660 x 2100 mm
WEIGHT 950 kg
Guedji D Daqjpfx Af Doa
The listed price is NET. Price does not include transport costs.
For more information, please contact us by phone or e-mail. We invite you to browse our full offer on our website.
Mažas skelbimas
Schwanberg
1 115 km
Lizdų gręžimo mašina
schellingBM
Skambinti
Būklė: labai geros būklės (naudotas), Motor power: 1.2 HP, 400 V, 50 Hz
Speed: 2800 rpm
Drill table size: 650 x 330 mm
Cross adjustment: 300 mm
Longitudinal adjustment: 150 mm
Height adjustment: 170 mm
Gjdpfx Asvzramof Djua
Table height: 880 mm
Weight: approx. 280 kg
Mažas skelbimas
Wiesbaden
1 198 km
Vamzdžių gręžimo mašina
HEBÖRBV 12
Skambinti
Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Sukimosi greitis iki: 2250 aps./min.
Paleidimo greitis: 0 - 300 mm/min
Godpfjyfgd Esx Af Deua
Variklio galia vienam varikliui: 2,9 kW
elektrinis prijungimas: 400 V
Svoris: 395 kg
Reikalinga vieta: 4100 x 1670 x 1450 mm

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo
Mažas skelbimas
Wiesbaden
1 198 km
Radialinės gręžimo staklės
KOLBKR 80 2A 576
Skambinti
Būklė: geras (naudotas), Drilling capacity in steel (diameter): 80 mm
Gujdpeg A Inwofx Af Dsa
Tapping in steel: M 80 x 4 mm
Arm reach: approx. 500/2500 mm
Min./max. distance between work surface and quill: 650/2300 mm
Quill stroke: 500 mm
Table clamping surface: 1250 x 2800 mm
Spindle speeds: 9 - 1800 rpm
Feeds: approx. 2 - 1250 mm
Spindle drive: 7.5 kW
Weight: 12,000 kg
Space requirements: 4000 x 1280 x 4100 mm
Mažas skelbimas
Oberperfuss
1 244 km
Tinkama gręžimo mašina
Verarbeitungstechnik Karl HeinzEco-Press Vario
Skambinti
Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: 17060002, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 32 h, galia: 1,1 kW (1,50 AG), įėjimo įtampa: 380 V, įėjimo srovė: 3 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, aukščio reguliavimo tipas: mechaninis, pavaros tipas: pneumatinis, bendras plotis: 600 mm, bendras ilgis: 700 mm, bendras aukštis: 1 450 mm, stalo plotis: 300 mm, stalo ilgis: 600 mm, bendras svoris: 75 kg, darbinis slėgis: 3 juosta, Įranga: CE žymėjimas, dokumentacija / vadovas, Beschlagų gręžimo staklės Eco-Press Vario kaip naujos!
Gamintojas: Verarbeitungstechnik Karl Heinz
Modelis: Eco-Press Vario (Grass įpėdinis modelis)
Pagaminta: 2017 m. – Labai mažai darbo valandų!
Staklės iš vieno žmogaus valdytos įmonės, itin prižiūrėtos, beveik nėra naudojimo žymių!
Įskaitant vyrių grąžto galvą – Blum gręžimo šablonas
Gsdpoyl Iktjfx Af Djua
Įskaitant linijinių skylių (32 mm) grąžto galvą – 10-ies griebtuvų, 90° pasukama
Taip pat tinkama stalčių gręžimui
Įskaitant DM5mm Leitz Premium linijinių skylių grąžtą!
Įskaitant vyrių grąžto galvą
Visų grąžtų vertė apie 600 €!
Įskaitant 2 pailginamas liniuotės, po vieną kiekvienoje pusėje
Įskaitant pneumatinį prispaudėją
Įskaitant lazerinį centro nustatymo įrenginį
Įskaitant važiuojamą pagrindą – darbo aukštis 900 mm
Įskaitant visus naudojimo įrankius, naudojimo instrukciją ir kt.
Iškart paruošta naudoti ir prieinama!
Dėl išsamesnės informacijos prašome siųsti užklausą!
Staklės judančios, galima pristatyti ir pademonstruoti vietoje. Tik savarankiškas atsiėmimas!
Parduodama tik dėl perėjimo prie CNC staklių.
Mažas skelbimas
Egenhofen
1 164 km
Skylių eilės, kaiščio ir tvirtinimo gręžimo mašina
Gannomat193V +
Skambinti
Būklė: naudotas, Gamybos metai: 2000, Veržlių kiekis eilėje: 11
Horizontalių veržlių kiekis: 3
Gręžtuvo galva puodelio vyrio angai: taip, Blum
Grąžtų žingsnis: 32 mm
Galia: 2,2 kW
Guedpfxexc Hi Ue Af Doa
Gręžimo agregatas: pasukamas
Mažas skelbimas
Schlüchtern
1 101 km
Automatinė gręžimo mašina
AlzmetallAC 25
Skambinti
Būklė: labai geros būklės (naudotas), Alzmetall AC 25 stulpinė gręžimo staklė, pagaminimo metai 1992. Labai gera būklė, galima apžiūrėti prijungus prie elektros.
Gjdpjx Sqv Hofx Af Dsua
Mažas skelbimas
Bächingen an der Brenz
1 186 km
Aukštos spartos radialinė gręžimo staklės
DONAUDanuflex 145
Skambinti
Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2002, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Factory overhauled in 2026
• Worktable 1200 x 750 mm with 5 T-slots
• Arm travel 1050 mm
• Drill spindle MT 4
• Infinitely variable speed adjustment
• Infinitely variable quill feed
• Tapping device
• 2 T-slots (18 mm) each at rear and left of machine base
• Machine lamp
• Central lubrication
• Table surface machined all around
• Drill guard
• Coolant system
Dimensions and Travel
Tool holder MT 4
Column diameter mm 195
Table size mm 1200 x 750
Number of T-slots 5
T-slot spacing mm 125
Quill stroke mm 220
Column stroke mm 450
Distance from spindle nose to
table surface min. mm 40
Guedpfxjyv A Ucj Af Dja
max. mm 710
Distance from spindle nose to
base plate min. mm 840
max. mm 1510
Drilling radius min. mm 540
max. mm 1590
Working table height mm 900
Machining Data
Drilling capacity (solid) St 60 Ø 45 mm
GG 22 Ø 55 mm
Thread cutting St 60 M 36
GG 22 M 45
Main Spindle Drive
AC motor, frequency-controlled kW 5.5 at 100% duty cycle
Speed range: rpm 15 - 2800
Torque Nm max. 250
Constant from rpm 15 - 200
Feed Drives
Infinitely variable feed mm/rev 0.02 - 0.7
Feed force N 12000
Electrical Data
Operating voltage/frequency V/Hz 400 / 50
Control voltage V 24
Total connected load kVA 9.3
Weight DANUFLEX 145 (without packaging)
with table 750 x 1200 mm kg 2600
Documentation
Operating manual, incl.
Lubrication and hydraulic diagram
Electrical schematic
Mažas skelbimas
Günzburg
1 194 km
Radialinė gręžimo staklės
ELHAR55
Skambinti
Būklė: naudotas, Gamybos metai: 1986, Gręžimo galia plienui (skersmuo): 50 mm
Gręžimo galia ketaus GG 20: 70 mm
Atstumas tarp kolonos ir ašies: 2000 mm
Morse kūgio kotas: MK 5
Veleno sukimosi greitis: 28–1.250 aps./min.
Veleno eiga: 330 mm
Gedpfxjyv N Euo Af Doua
Bendras galios poreikis: 8 kW
Staklių svoris apie: 5.500 kg
Mažas skelbimas
Günzburg
1 194 km
Radialinė gręžimo staklės
ELHAR60-1600
Skambinti
Būklė: naudotas, Gamybos metai: 1996, Gręžimo našumas pliene (skersmuo): 60 mm
Iškyša: 1600 mm
Pjūvio aukštis – maks. apie 1300 mm
Praplatinimo skersmuo pliene: 80 mm
Gedpfx Asyv N Ehef Doua
Praplatinimo skersmuo ketaus: 100 mm
Sriegimas pliene ST 60: M55 mm
Veleno apsukos: 29–1.450 aps./min
Veleno greičių skaičius: 12
Gręžimo veleno skersmuo: 100 mm
Morse kūgis: MK5
Veleno eiga: 350 mm
Bendra galingumo poreikis: 7,5 kW
Staklių svoris: apie 4.600 kg
Užimama vieta: apie 2600x1100x3200 mm
Mažas skelbimas
Nattheim
1 177 km
Gręžimo ir (arba) gilzių įterpimo mašina
GannomatIndex 180 Pro
Skambinti
Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with:
- Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm)
1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm
- Fully automatic, electronically controlled centralized lubrication
- X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min
- Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis
- Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis
Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion
- Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas
- Glue quantity steplessly adjustable via operator software
- Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water
- Indicator lamp for glue level in glue container
- 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable)
- 4 pcs. start buttons for individual operation with 1-4 workpieces
- 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm
Gjdoxwaz Hepfx Af Deua
- 1 pc. extraction funnel, connection diameter 80 mm
- 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7
- Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis
OPTIONS:
- 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle
- 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders)
- Surcharge for machine bed length 1,800 mm with working length 1,800 mm
- Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced)
- 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm
- Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm
- Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced)
- 1 NC-controlled Z-axis, with K
Mažas skelbimas
Nattheim
1 177 km
Kaiščių skylių gręžimo mašina
GannomatDB 21
Skambinti
Būklė: naudotas, Gamybos metai: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" – complete in standard configuration, equipped with:
- Fully automatic electronic control with pulse operation via foot pedal: clamping – drilling – releasing; electrical intermittent operation.
- Automatic retraction of the drilling unit upon reaching the preset drilling depth.
- Automatic extension of drilling depth for face-end drilling. This eliminates the need to manually adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, drilling depth flat face 14 mm, drilling depth end face 24 mm).
- 1 drilling beam with 21 spindles, 32 mm spacing, 1.5 kW motor (drilling feed 0–70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit replacement.
- Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder.
- 1 clamping carriage adjustable along the Y-axis, with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height.
Ideal positioning system comprising:
- 1 positioning rail, 1800 mm, for shelf drilling (aluminum profile 40 x 40 mm) with 3 flip stops
- With quick-change system, easily convertible from right to left for mirrored shelf drilling in carcass construction. Also suitable for line boring in System 32.
- Side stops and position settings, as well as the drilling height adjustment over the support table, using mechanical digital counters.
- Side stops are easily swung out for the shortest possible changeover times between carcass, frame, and line boring operations.
- Clamping arms for the clamping carriage are designed for line boring positions up to max. 300 mm.
- Ideal three-stage tooling system.
- 1 set of dowel drill bits:
Godpfxsxnlfle Af Dsua
- 5 tungsten carbide dowel drill bits, Ø 8 x 77 mm, right-hand
- 4 tungsten carbide dowel drill bits, Ø 8 x 77 mm, left-hand
Base machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" as above.
Additional features:
- Suction funnel, dust-tested, Ø 120 mm
- 1 set for line boring in system
Mažas skelbimas
Trittau
890 km
Radialinio gręžimo staklės
BREDAR 55-1250
Skambinti
Būklė: naudotas, Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 1 250 mm, Radial Drilling Machine
Manufacturer: Breda Model: R 55-1250
Year of manufacture: 1994
Technical Details
Manufacturer: BREDA
Model: R 55-1250
Arm Length: 1250 mm
Drilling capacity in steel: 55 mm
Drilling capacity in cast iron: 70 mm
Thread cutting in steel: M 50
Thread cutting in cast iron: M 65
Spindle taper: MT 5
Arm reach: 1250 mm
Traverse of spindle box: 930 mm
Minimum/maximum distance from base plate: 536 – 1375 mm
Vertical travel of arm: 705 mm
Spindle stroke: 310 mm
Number of spindle speeds: 12
Spindle speeds: 30 - 1200 rpm
Number of feeds: 8
Feeds: 0.06 – 1.0 mm/rev
Base plate: 2070 x 910 mm
Base plate clamping surface: 1325 x 910 mm
Motor power: 4.4 kW – 380 V
Dimensions (L x W x H): 2.1 x 1.0 x 2.5 m
Weight: 3 t
Accessories
Drilling table 750 x 600 x 550 mm
Coolant system
Gusdov Rpf Sepfx Af Dja
Hydraulic clamping
All information subject to change without notice.
A demonstration is possible at any time in our showroom.
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-52T
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 2 – 4 weeks from order
Country of origin: Poland
Price: €1,595
Drilling capacity in structural steel: 23 mm
Holder: 19 mm Weldon
Motor power: 1.6 kW
Thread cutting capacity: M20
Length: 266 mm
Width: 259 mm
Height: 500 mm
Weight: 17 kg
Max. drilling capacity: 23 mm
Max. annular cutter capacity: 50 mm
Max. cutting depth: 75 mm
Stroke: 190 mm
Motor speed: 160 – 250 / 390 – 580 rpm
Min. workpiece thickness: 8 mm
The PRO-52T magnetic drilling machine is designed for hole cutting and thread cutting.
The powerful variable-speed motor enables milling up to 50 mm and drilling up to 23 mm.
The machine’s forward and reverse functions, together with the new Promotech threading system, allow thread cutting up to M20.
The 2-speed gearbox with stepless speed adjustment enables optimal speed setting depending on diameter, steel grade, or tool quality.
The intelligent speed control system keeps the motor speed constant regardless of varying loads.
The innovative 360-degree LED indicator assists in proper machine operation and increases work safety.
Features and Advantages:
• Robust motor with powerful 2-speed gearbox
• Electronic Speed Stabilization System (ESSS) maintains stable speed regardless of load fluctuations
• Thread cutting of through and blind holes
• Milling with carbide or HSS cutters and drilling
• Electronic clutch
• Overload and overheat protection
• Rigid design extends tool life
• Tilt sensor stops the motor in case of machine interruption
• A 360-degree monitoring system displays the current state of the tool and provides safety and diagnostic information, e.g., on worn-out brushes
• Innovative smart magnet with reduced weight
• Magnetic field shape control (MFSC) delivers maximum holding force on thin materials
• Energy Saving Base (ESB) consumes only 50% power when motor is off
• Semi-automatic slide adjustment allows easy, quick, precise, and repeatable setting of play, with no special knowledge or experience required
• Intuitive control panel positioned on top of the drill
• Large coolant container
Standard Delivery Includes:
• Drilling machine
• Plastic case
• Handle (3 pcs)
• MT2 arbor with 19 mm (3/4”) Weldon tool holder
• Safety strap
Godpfx Aeyrht Ief Doua
• Cooling system
• Protective spring for coolant hose
• MT2 drift
• 6 mm hex key
• 5 mm hex key with handle
• 2.5 mm hex key
• 8 mm open-ended wrench
• Tool box
• Instruction manual
OPTIONS (PRICES ON REQUEST):
Pressure coolant system 2 l
Vacuum pad
Pneumatic ejector
Pipe clamping device
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-36 PM Battery
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 2 – 4 weeks from order
Country of origin: Poland
Price: €2,595
Drilling capacity in construction steel: 12 mm
Shank: 19 mm Weldon
Motor power: 0.4 kW
Length: 361 mm
Width: 238 mm
Height: 352 mm
Weight: 14.5 kg
Max. drilling capacity: 12 mm
Max. annular cutter capacity: 36 mm
Max. cutting depth: 50 mm
Stroke: 70 mm
Motor speed: 260 rpm
Min. workpiece thickness: 6 mm
Gujdsyrhtnepfx Af Dja
This special battery-powered drilling machine with permanent magnet base is designed for use in remote locations where no external power supply is available. The base features high-strength neodymium magnets and requires no electricity for operation. The PRO-36 PM Battery is equipped with an LED monitoring system that emits green and red signals to indicate the machine’s current status and provide safety notifications.
The drilling machine can be used on convex (min. diameter: 80 mm) and concave (min. diameter: 1000 mm) materials. Up to 47 holes of Ø 20 mm can be drilled in 10 mm steel plates when the PRO-36 PM Battery is equipped with the CAS LiHD 10.0 Ah battery pack.
Features and benefits:
• LED monitoring system flashes green when insufficient adhesion is detected, e.g., due to a gap or thin workpieces
• Double guide system ensures exceptional precision and maintenance-free operation
• Overload protection
• Tilt sensor stops the motor if the machine detaches
• Control panel equipped with vandal-resistant illuminated start/stop switches for the motor
Standard delivery set:
• Cordless drilling machine with cooling system
• Plastic carrying case
• 4.0 Ah battery
• Handle (3 pcs.)
• Safety strap
• 4 mm Allen key with handle
• Operating manual
OPTIONS (PRICES ON REQUEST):
Charger
Pressure coolant system
Vacuum pad
Vacuum pump
Compressed air ejector
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-72T
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 2 – 4 weeks from order
Country of origin: Poland
Price: €1995
Drilling capacity in structural steel: 25 mm
Tool holder: 19 mm Weldon
Motor power: 1.6 kW
Thread cutting capacity: M20
Length: 266 mm
Width: 259 mm
Height: 505 mm
Weight: 18 kg
Max. drilling capacity: 25 mm
Max. core drilling capacity: 70 mm
Max. cutting depth: 75 mm
Stroke: 190 mm
Motor speed: 120-190 / 290-450 rpm
Min. workpiece thickness: 8 mm
The PRO-72T magnetic drilling machine is suitable for drilling and thread cutting. The powerful motor with variable speed allows milling up to 70 mm (2-3/4") and drilling up to 25 mm (1"). Thanks to reversible rotation and the new threading system from Promotech, the machine can cut threads up to M20. The 2-speed gearbox with infinitely variable speed control enables optimal speed adjustment depending on diameter, steel grade, or tool type. The intelligent speed control system keeps the motor speed constant regardless of load. The innovative 360° LED display makes machine operation easier and increases workplace safety.
Features & Benefits:
• Powerful motor with robust 2-speed gearbox
• Electronic Speed Stabilization System (ESSS) for constant speed regardless of load fluctuations
• Thread cutting in through and blind holes
Gjdpfx Afoyrhrwj Deua
• Milling with carbide or HSS cutters as well as drilling
• Electronic clutch
• Overload and overheating protection
• Rugged construction for longer tool life
• Tilt sensor stops the motor if the machine breaks away
• 360° visualization displays current machine status and provides safety and diagnostic info, e.g., for worn carbon brushes
• Innovative lightweight Smart Magnet
• Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials
• Energy Saving Base (ESB) consumes only 50% of its power when idle
• Semi-automatic spline adjustment for easy, quick, precise, and repeatable guide clearance setting without specialized knowledge
• Intuitive control panel on top of the drilling machine
• Large coolant reservoir
Standard scope of delivery:
• Drilling machine
• Plastic carry case
• Handles (3 pieces)
• MK3 arbor with 19 mm (3/4") weldon shank holder
• Safety strap
• Coolant system
• Protective spring for coolant hose
• MT2 drift
• 5 mm Allen wrench with handle
• 4 mm Allen wrench
• 2.5 mm Allen wrench
• 8 mm combination spanner
• Operating manual
OPTIONS (PRICING ON REQUEST):
Pressure cooling system
Pipe fixture
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-36 Battery
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 2 – 4 weeks from order
Country of origin: Poland
Price: €1,695
Drilling capacity in structural steel: 12 mm
Tool holder: 19 mm Weldon
Guedpfoyrhqtex Af Dsa
Motor power: 0.45 kW
Length: 316 mm
Width: 235 mm
Height: 328 mm
Weight: 11.5 kg
Max. drilling capacity: 12 mm
Max. annular cutter capacity: 36 mm
Max. cutting depth: 50 mm
Stroke: 70 mm
Motor speed: 260 rpm
Min. workpiece thickness: 6 mm
The PRO-36 Battery is a magnetic drill designed for drilling holes up to 36 mm in diameter using annular cutters. The machine is also capable of drilling holes up to 12 mm in diameter with twist drills.
The cordless drill is equipped with an LED monitoring system that displays green and red signals to indicate the current machine status and provide safety information. The control panel features illuminated, vandal-proof start/stop buttons (green/red).
Features and advantages:
• LED monitoring system displays current machine status and delivers essential safety information
• The LED system flashes green when insufficient adhesion is detected, e.g., due to a gap or overly thin workpieces
• Dual guide system ensures exceptional precision and maintenance-free operation
• Overload protection
• Magnetic field sensor automatically stops the motor if holding force drops too low
• Magnetic Field Shape Control (MFSC) ensures maximum holding force even on thin materials
• Energy Saving Base (ESB) consumes only 50% power when motor is idle
• Innovative smart magnet with reduced weight
Standard delivery set:
• Cordless magnetic drill
• Plastic case
• 4.0 Ah battery
• Handle (3 pcs.)
• Safety belt
• Cooling system
• 4 mm Allen key with handle
• Operating manual
OPTIONS (PRICES ON REQUEST):
Charger
Pipe attachment
Pressure coolant system
Vacuum pad
Vacuum pump
Pneumatic ejector
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-36
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 2–4 weeks from order
Country of origin: Poland
Guedoyrhqmepfx Af Doa
Price: €595
Drilling capacity in structural steel: 12 mm
Shank: 19 mm Weldon
Motor power: 0.1 kW
Length: 175 mm
Width: 250 mm
Height: 312 mm
Weight: 10 kg
Max. drilling capacity: 12 mm
Max. annular cutter capacity: 36 mm
Max. cutting depth: 51 mm
Stroke: 70 mm
Motor speed: 350 rpm
The PRO-36 drills holes up to 36 mm in diameter using annular cutters.
The machine can also drill holes up to 12 mm in diameter using twist drills with a 19 mm (3/4”) Weldon shank.
Its compact design and excellent weight-to-performance ratio make this magnetic core drilling machine a highly popular choice for customers.
Features and Benefits:
• Double rail guide system ensures exceptional rigidity and maintenance-free operation
• Compact size and ultra-lightweight – ideal for on-site work
• Robust, one-piece slide and gearbox housing for extra stability
• Specially designed motor with heavy-duty gearbox
• Maintenance-friendly design for easy operation
• Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials
• Magnetic Power Adhesion Control (MPAC) module senses the holding force of the electromagnetic base, protecting both the operator and the machine when working on thin workpieces
Standard scope of delivery:
• Magnetic core drilling machine
• Metal case
• Chip guard / drill guard
• Coolant bottle unit
• Safety chain with carabiner
• Hex key s=4
• Operating manual
• Standard shipping weight – 16.7 kg
OPTIONS (PRICES ON REQUEST):
Coolant system 2 ltr
Vacuum pad
Pneumatic ejector
Pipe attachment
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-50
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 2 - 4 weeks from order
Country of origin: Poland
Price: €995
Drilling capacity in construction steel: 23 mm
Shank: 19 mm Weldon
Motor power: 1.15 kW
Length: 331 mm
Width: 254 mm
Height: 456 mm
Weight: 15.5 kg
Max. drilling capacity: 23 mm
Max. annular cutter capacity: 50 mm
Max. cutting depth: 50 mm
Stroke: 160 mm
Motor speed: 240 / 480 rpm
Min. workpiece thickness: 6 mm
PRO-50 features a specially developed motor and 2-speed gearbox (240/480 rpm), optimized to achieve the proper speed for working with HSS cutters up to Ø45 mm and twist drills up to Ø23 mm. The robust construction, optimized through FEA software (finite element analysis), extends tool service life and allows a cutting depth of up to 75 mm. The compact design and innovative, intelligent magnet with reduced weight make this machine particularly lightweight.
The PRO-50 offers maximum holding force on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill and operator are protected by the Magnetic Power Adhesion Control (MPAC) module, which monitors magnet adhesion and prevents operation on workpieces that are too thin. PRO-50 also features an Energy Saving Base (ESB), which consumes only 50% of its power when the motor is not running.
Features and advantages:
• Compact design with excellent weight-to-power ratio
• Specially developed motor
• Motor speeds 240/480 rpm (under load)
• Spindle equipped with MT2
• Innovative intelligent magnet with reduced weight
• Rigid construction extends tool life
• Large stroke enables the use of long tools
• Motor cable with additional protective cover
• Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials
• Magnetic Power Adhesion Control (MPAC) monitors adhesion force of the electromagnetic base and protects both operator and machine when working with thin workpieces
• The Energy Saving Base (ESB) uses only 50% power when the motor is not running
Standard delivery set:
• Magnetic drill
• Plastic carrying case
• Handle (3 pcs)
• MT2 arbor with 19 mm (3/4”) Weldon tool holder
• Safety strap
Gjdeyrhp Nspfx Af Djua
• Coolant system
• Protective spring for coolant hose
• MT2 drift
• 2.5 mm Allen key
• 5 mm Allen key
• 5 mm T-handle Allen key
• 8 mm open-ended spanner
• Operating instructions
OPTIONS (PRICES ON REQUEST):
Pipe mounting
Pressurised cooling system
Vacuum pad
Vacuum pump
Compressed air ejector
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-40 AD
Skambinti
Būklė: naujas, Condition: new
Delivery time: approx. 2 - 4 weeks from order
Country of origin: Poland
Price: €1,055
Drilling capacity in structural steel: 12 mm
Holder: 19 mm Weldon
Motor power: 1.1 kW
Length: 400 mm
Width: 126 mm
Height: 185 mm
Weight: 10 kg
Max. drilling capacity: 12 mm
Max. core drill capacity: 40 mm
Max. cutting depth: 40 mm
Stroke: 45 mm
Motor speed: 370 rpm
Min. workpiece thickness: 6 mm
The PRO-40 AD is a low-profile magnetic drilling machine that can be used even in the tightest spaces. It is the perfect solution for all applications in confined areas where conventional magnetic drills are too large. Its powerful motor enables drilling holes up to 40 mm in diameter and up to 40 mm in depth. An innovative, extremely strong magnetic base with high performance on air gaps allows for
operation even on painted, rusted, or thin surfaces. The Magnetic Power Adhesion Control (MPAC) protects both the drilling machine and the operator from working on surfaces that are too thin or unsuitable by preventing the motor from starting if the holding force is dangerously low. The PRO-40 AD is compatible with carbide and HSS cutters as well as twist drills with a 19.05 mm Weldon shank.
Features & Benefits:
• Ultra-low magnetic drilling machine with only 185 mm height
Gjdpfxeyrhp Aj Af Djua
• Extremely strong magnetic base with 1009 kgf (9900 N) holding force
• Compact and lightweight design at only 10 kg
• Milling capacity up to 40 mm with annular cutters
• Suitable for twist drills with 19.05 mm (3/4") Weldon shank
• Extended stroke of 45 mm allows cutting depths up to 40 mm
• Magnetic Field Shape Control (MFSC) for maximum holding force on thin materials
• Integrated swarf guard
• Removable feed handle (ratcheting), mountable on both sides
• Carrying handle for easy transport
• Cooling with coolant bottle
Standard set includes:
• Drilling machine
• Plastic carry case
• Handle
• 6.34 x 102 mm pilot pin for HSS cutters
• 7.98 x 103 mm pilot pin for TCT cutters
• Safety strap
• 4 mm Allen key
• Operating manual
OPTIONS (PRICES ON REQUEST):
Cutting extension
250 ml coolant bottle
Mažas skelbimas
Austrija
945 km
Magnetinė gręžimo mašina
PROMOTECHPRO-36 Auto
Skambinti
Būklė: naujas, Condition: New
Delivery time: approx. 2–4 weeks from order
Country of origin: Poland
Price: €1445
Mount: 19 mm Weldon
Motor power: 1 kW
Godpfx Afeyrhpps Dsua
Length: 307 mm
Width: 221 mm
Height: 317 mm
Weight: 13.5 kg
Max. annular cutter capacity: 36 mm
Max. cutting depth: 51 mm
Stroke: 70 mm
Motor speed: 350 rpm
Min. workpiece thickness: 6 mm
The new PRO-36 AUTO is equipped with a unique LED monitoring system that displays the current status of the drill and provides additional safety and diagnostic information. The Auto Feed Smart Drive System automatically optimizes parameters for each cutting/milling operation in automatic mode. The drill control continuously selects the most effective operating conditions based on the ratio of motor load, feed rate, and the permissible cutting parameters for each tool type and bore diameter. This results in longer lifespan for HSS and TCT cutters and improved machine performance.
Countersinking and working on thin workpieces with low clamping force (flashing green LED) is only possible in manual mode. A safety strap protects the machine in the event of loss of clamping force.
Features and benefits:
• LED monitoring system displays the current status of the drill and supplies safety and diagnostic information.
• The LED monitoring system flashes green if insufficient adhesion is detected, e.g. due to gaps or thin workpieces.
• Auto Feed Smart Drive optimizes milling parameters for each tool individually, depending on type (HSS or TCT) and bore diameter from 12 mm to 36 mm, significantly extending tool life.
• The tilt sensor stops the motor if the machine loses stability.
• Dual rail guide system ensures exceptional rigidity and backlash-free operation.
• Magnetic Field Shape Control (MFSC) provides maximum holding force on thin materials.
• Automatic feed control stops the machine as soon as the cutter passes through the workpiece.
• Protection against automatic restart after power failure.
• Compact, robust construction with ultralight weight of 13.5 kg.
Standard delivery:
• Drill
• Metal case
• Safety strap
• Coolant tank
• Chip guard
• 4 mm Allen key
• User manual
Patikimumo ženklas
Machineseeker sertifikuoti platintojai

Mažas skelbimas
Ennepetal
1 178 km
Radialinė gręžimo staklės
WAGNERPRC50
Skambinti
Būklė: naudotas, Gamybos metai: 2022, Gręžimo našumas plienui / pilkai lietiniui: 50/60 mm
Atstumas nuo kolonos maks.: 1600 mm
Ruošinio aukštis - maks.: 1300 mm
Atstumas nuo kolonos min.: 300 mm
Veleno tvirtinimas: MK5
Gręžimo gylis vienu eiga: 300 mm
Sijos vertikalus reguliavimas: 800 mm
Pagrindo plokštės tvirtinimo paviršius: 1600 x 800 mm
Gedpfx Asyuy Szef Djua
Veleno apsukos: 125-1250 aps./min
Bendras galios poreikis: 3,5 kW
Staklių svoris apie: 3,5 t
Užimama vieta apie: 2,4 x 1,2 x 2,7 m
Pasiūla per apsuką: 0,025–1,38 mm/aps.
Staklės be kubinės stalo.
Mažas skelbimas
Krefeld
1 226 km
Radialinio gręžimo staklės
ELHAR80
Skambinti
Būklė: naudotas, Gamybos metai: 1984, Gręžimo efektyvumas pliene (skersmuo) 80 mm
Išsikišimas 2000 mm
Rušinio aukštis - maks. apie 1300 mm
Pragręžimo skersmuo pliene 80 mm
Pragręžimo skersmuo ketaus 100 mm
Sriegimas ST 60 M 68 mm
Veleno apsukos 16 - 1250 aps./min.
Veleno greičių skaičius 32
Veleno skylės skersmuo / tvirtinimas 110 mm / MK 5
Veleno eiga 550 mm
Padavimo laipsnių skaičius 18
Padavimas 0,06 - 3,0 mm/aps.
Atstumas velenas/pagrindo plokštė 480 - 1800 mm
Kolonos skersmuo 500 mm
Veleno variklis 11 kW
Kėlimo variklis 4 kW
Bendras galios poreikis 15 kW
Staklių svoris apie 8,5 t
Gusdpfxsxqrc Ne Af Doa
Užimamas plotas 3190 x 1250 x 3600 mm
Su darbiniu stalu 1200 x 1200 x 720 mm, svoris apie 800 kg
Mažas skelbimas
Langwedel
990 km
Sriegimo mašina Stalinė gręžimo mašina
FLOTTSB 15 GL
Skambinti
Būklė: geras (naudotas), Gamybos metai: 1989, Offered from insolvency: a fully operational thread tapping machine
Manufacturer: Flott
Model: SB 15 GL
Year of manufacture: 1989
Machine no.: 34177063
Technical specifications:
Thread cutting capacity: M2–M12
Spindle taper: MT 2
Quill stroke: 80 mm
Throat depth: 200 mm
BILZ WFP 1 quick-change tapping chuck with inserts
Guodpfx Ajfm S Naof Dsa
Röhm drill chuck 0–10 mm
Foot switch
Digital display for quill stroke
Single/continuous cycle operation
Emergency stop
Speeds from 80–3150 rpm
380 V
Motor power: 0.75 kW
Max. distance between table and spindle: 380 mm
Overall height approx. 1700 mm
Accessories:
8 lead screws with pitches: 1.5, 1.25, 1.75, 0.8, 0.7, 0.5, 0.45, 1.0
Operating manual
Weight approx. 200 kg
Mažas skelbimas
Dortmund
1 157 km
Radialinė gręžimo staklės
KNUTHR 40
Skambinti
Būklė: geras (naudotas), Gamybos metai: 2001, Gręžimo pajėgumas: 40 mm
Veleno tvirtinimas: MK 4
Išlenkimas: 300 - 1300 mm
Svoris apie 2300 kg
Priedai / Ypatingos savybės:
- Centrinis užspaudimas
- Motorizuotas kėlimas ir leidimas
- Sukimas dešinėn/kairėn
- Kubinis stalas
- Aušinimo skysčio siurblys
- Apšvietimas
- Atitinka CE reikalavimus
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
Guedpsyud Tvjfx Af Dea
DE - 44143 Dortmund - Wambel / Vokietija
Palengviname jums paiešką: "greitas radialinės gręžimo mašina"
Jūs iš karto ir nemokamai gausite naujus pasiūlymus el. paštu.
Galite bet kada paprastai nutraukti paieškos užduotį.
Naudota Greitas Radialinės Gręžimo Mašina (45 661)
Dabar ieškokite visame Machineseeker su daugiau nei 200 000 naudotų mašinų.Naršykite populiariausius mašinų pavadinimus:
- Aparatūros Gręžimo Mašina
- Automatinis Gręžimo Mašina
- Flanšo Gręžimo Mašina
- Gaisrinė Mašina
- Giliai Skylė Gręžimo Mašina
- Grindų Šlifavimo Mašina
- Gręžimo Mašina Serija
- Išcentriniai Sprogdinimo Smėliavimas Mašina
- Keli Gręžimo Mašina

Sužinokite dabar
+44 20 806 810 84
+44 20 806 810 84
Įdėti skelbimą dabar
*už skelbimą/mėnuo










































































































