Radialinio gręžimo staklės

collet BU

Sąlyga: naudotas, Gamybos metai: 2008, Article: Vertical Turning and Grinding Center Make: EMAG Model: VSC 250 DS Year of manufacture: 2008 Nksdsia Rtdspfx Af Ist Control unit: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Cooler for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Air through the spindle Two clamping circuits through the spindle (air and oil) Unfortunately, the grinding spindle is defective. However, it can be overhauled at a spindle repair shop. Otherwise, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or

Sąlyga: naudotas, Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 540 mm, greitas poslinkis X ašimi: 24 m/min, greitas poslinkis Y ašis: 24 m/min, greitasis eiga Z ašyje: 20 m/min, X ašies padavimo greitis: 16 m/min, Y ašies padavimo greitis: 16 m/min, padavimo greitis Z ašis: 16 m/min, nominali (akivaizdi) galia: 16 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: ITNC 530, stalo apkrova: 800 kg, bendras svoris: 5 300 kg, veleno greitis (min.): 10 000 aps./min, veleno veikimo valandos: 8 500 h, ašies variklio galia: 12 W, veleno nosis: ISO B40, ašies skaičius: 1, įrankių magazino lizdų skaičius: 24, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, drožlių transporteris, Machine in very good condition and maintained by the manufacturer. Available immediately. Renishaw probe Nkedpfxswxrgtj Af Iot Video available upon request. Delivery and installation possible by our team.

Sąlyga: geras (naudotas), Used radial drilling machine SASS Mod. TRM 2200 Excellent condition, fully operational. Equipped with cube Maximum drilling diameter in solid cast iron: 100 mm (20-22) Maximum drilling diameter in solid steel R=60: 80 mm Nkjdjikqz Sjpfx Af Iot Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor – rpm: 18 ÷ 1600 Automatic feeds Maximum arm outreach (column edge to spindle axis): 2230 mm Minimum and maximum drilling radius: 660 ÷ 2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base dimensions: 2490 x 1230 mm Spindle motor: 11 HP Weight: 9000 kg

Sąlyga: geras (naudotas), Gamybos metai: 1992, Favretto MB 130 – Technische Daten Maschinentyp: tangentiale (horizontale) Flachschleifmaschine Baujahr: 1992 Tischgröße: 1700 × 400 mm Magnetspannplatte: ca. 1300 × 400 mm Magnetplattenhöhe: 40 mm Längsverfahrweg (X-Achse): 1380 mm Querweg (Y-Achse): 450 mm Vertikalweg (Z-Achse): 550 mm Abstand zwischen Spindelmitte und Tischoberfläche: 203 mm (min) bis 753 mm (max) Schleifscheibenabmessungen: 400 mm Durchmesser × 152 mm Breite × 100 mm Bohrung Spindeldrehzahl: ca. 1400 U/min Längsvorschub: 2000 bis 40000 mm/min Quer-Vorschub: 50 bis 3000 mm/min Nkedpfxst Rwvzs Af Iet Vertikal-Vorschub: 700 mm/min Antriebsleistung Schleifkopf: ca. 15 kW Gesamtanschlusswert: ca. 25 kW Maximale Tischbelastung ohne Magnetspannplatte: ca. 1500 kg Maximale Tischbelastung mit Magnetspannplatte: ca. 1205 kg Maximale Schleifkapazität (L × B × H): ca. 1500 × 600 × 550 mm Maschinengewicht: ca. 7100 kg

Sąlyga: naudotas, Gamybos metai: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Spindle stroke: 350 mm Min./max. offset from column outer surface to spindle axis: 1170/2070 mm Min./max. radius at extreme spindle positions: 1370/2270 mm Min./max. distance from spindle head in vertical position (with spindle retracted) to floor: 305/1555 mm Min./max. distance from spindle axis in horizontal position to floor: 295/2725 mm Nedpfevwbccox Af Iskt Vertical arm adjustment (stroke): 1250 mm Horizontal arm movement (travel): 900 mm Arm rotation: 360° Spindle head rotation: 360° Swivel angle of spindle head with spindle housing up/down from horizontal position: 90° / 90° Saddle travel on bed (extended): 2500 mm Column diameter: 400 mm

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3020 mm Press capacity: 320 t Approach speed: 140 mm/s Bending speed: max. 10 mm/s Return speed: 130 mm/s Y-axis stroke: 400 mm Installation height: 650 mm Throat depth: 450 mm Clear gap between uprights: 2555 mm Nkjdpfjuf Nr Ajx Af Iet Machine length: 3785 mm Machine width: 2290 mm Width without front supports: 1740 mm Total height: 3100 mm Height of machine table: 920 mm Motor power: 22 kW Oil tank: 300 l Machine weight: 14,450 kg (Data may vary depending on equipment) Standard equipment: - 3 CNC axes (Y1, Y2, X) - Double-guided press beam, sturdy and precise - Robust, double-guided backgauge - Double-guided backgauge fingers on linear guideways - Movable front support arms with height adjustment - Side and rear protective covers - 60mm lower die holder rail - Manual upper tool clamping system (Promecam system) - Foot switch with emergency stop button - 380 V, 50-60 Hz, 3 phases - LED lighting Additional equipment: - CNC control Delem DA 66T - R-axis backgauge CNC-controlled - CNC-controlled crowning - Fiessler Akas 2M laser safety system - 2 additional backgauge fingers (total 4) - 1 set of upper and lower tools - Other bending lengths and thicknesses available with corresponding accessories! -

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Double-sided Cantilever Racking, Used: Hot-dip Galvanized Bolted System Scope of Delivery: - 4 double-sided rack uprights, height 4,160 mm, with 1,200 mm base sections - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and system extension possible at any time - Also available in larger quantities: 20 uprights in stock Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base sections, 1,200 mm depth, standard = Four storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) Njdpfx Ajh Ek Daef Iokt - Includes assembly instructions and C4 load capacity signs according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport, including advance delivery scheduling. The material is sensibly packed to facilitate easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, flat, suitable for dowel fixing, and able to bear the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to occupational safety guidelines, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: naudotas, Gamybos metai: 1977, Drilling capacity in steel (diameter): 75 mm Reach: 1700 mm Workpiece height - max.: 370 - 1700 mm Total power requirement: 12 kW Machine weight approx.: 7000 kg Space requirements approx.: [to be specified] Manufacturer: CSEPEL (Hungary) Radial Drilling Machine Type: RFh 75 / 2000 Year of manufacture: 1977 Serial no. 61158 Drilling capacity in steel/cast iron: 75 / 90 mm Tapping in steel/cast iron: 60 / 70 mm Nkjdpfxst Hw Uve Af Ijt Maximum reach: approx. 1700 mm Maximum workpiece height: 370 to 1700 mm Clamping table area: 1100 x 2300 mm Intermediate table approx.: 600 x 1200 x 300 mm Table height above floor approx.: 600 mm Tool holder: MK 5 21 spindle speeds: 19 – 1900 rpm 12 feed rates: 0.047 – 2 mm/rev Drill spindle stroke: 380 mm Vertical arm adjustment: 950 mm Cross-travel of drilling carriage: 1500 mm Drill spindle drive approx.: 10 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight: approx. 7000 kg Overall dimensions: approx. 3600 x 1400 x 3400 mm (height) Accessories / Special equipment: • Rotary selector for hydraulic speed adjustment • Mechanical feed preselection • Drilling with or without automatic feed, or with manual fine feed • Drill carriage adjustable by hand, vertical arm adjustment via electric motor; feed length/drilling depth set via cams on the quill nonius, with automatic depth cut-off and quill return • Electro-mechanical clamping of arm and drill head via push button • Built-in coolant system in the base table • VOGEL central lubrication, intermediate table, etc. Condition: satisfactory to good – available for demonstration under power, robust machine with high drilling capacity Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Sąlyga: naudotas, Gamybos metai: 1965, Max. core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Max. drilling diameter: 110 mm Total power requirement: 30 kW Machine weight approx.: 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - solid drilling approx. 2 - 50 mm - boring approx. 100 mm Max. drilling depth: 1,600 / up to 2,000 mm (see stroke/installation length) Drill carriage stroke approx.: 4,000 mm Distance between spindle heads: 5,000 mm Center height over guideways: 350/450 mm Drill carriage feed, infinitely variable: 20 - 200 mm/min Rapid feed of drill carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Working spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V – 50 Hz Overall machine/guideway length: 7,500 / 5,000 mm Total weight approx.: 10,000 kg Nsdpfjt Hwucox Af Ijkt Accessories / Special features: - Machine consists of the following elements: Main spindle on the left side, followed by a BOZA, powered table assembly with ball screw, BOZA with increased center height, and a spindle stock of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm. Very large and elaborate coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø. - Suitable for rotating workpiece/fixed drilling tool (ELB and BTA methods), as well as for stationary workpiece and rotating drilling tool. Internal (ELB) as well as external oil supply (BTA) possible. - Complete coolant system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rates: 17/40/120 and 220/500 L/min; capacity approx. 2,500 L. - Carriage feed via ball screw and infinitely adjustable DC motor; mounted table cross-adjustable approx. 500 mm, table approx. 800 x 800 mm for clamping cubic and cylindrical workpieces. Electrically controlled via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø. - Modernized control panel with speed display, feed adjustment and indication, kW display, feed/rapid traverse selection (left/right), etc. - 2 separate control cabinets, separate BOZA, sleeves, adapters, clamping aids, and much more. Condition: Good – ready for demonstration soon; machine is highly valuable due to accessories Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice Further deep hole drilling machines constantly in stock – please inquire with us.

Sąlyga: naudotas, Diameter 5-20 mm Length 10-200 mm Mount: Morse taper Various drilling, milling, and turning tools as well as other accessories. Nkjdoi Eg Rtepfx Af Iot Drill bits, taps, and milling cutters: 30 EUR/kg Other accessories: 10 EUR/kg