Greitaeigiai Kateriai pirkti naudotą (590)

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), 1 used rapid steam generator ----- Manufacturer: CERTUSS Model: Universal Output: 1,300 kg/h Max. thermal output: 947 kW Operating overpressure: 10 bar Test pressure: 57 bar Laodpsi E Hztsfx Am Reg Water content approx.: 155.7 l Heating surface: 23.7 m² CE marking: CE 0035 Year of manufacture: 2004 Year of manufacture (heating coil): 2018/2021 Equipped with Certuss oil burner, oil throughput 40 – 80 kg/h Control cabinet, mounted on the boiler body, feed water pump, and existing coarse and fine fittings

Būklė: geras (naudotas), Machine Photos 1 to 9 Gillardon Price: €9,500 Technical data: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M27 - Spindle taper: MT 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min./max.: 400 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 1.6 / 2.9 kW - Space requirement approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1,500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots (vertical) at the rear side of the machine Machine 2 Photos 10 to 15 HKS 34 MT Price: €16,500 - Drilling capacity: 45 mm - Table size: 1200 x 560 mm - Drilling capacity: 45 mm - Spindle taper: MT 4 Lajdpsu Nm Nisfx Am Rjg - Quill stroke: 170 mm - Speed / steps: 70–2000 rpm - Feed / steps: 0.1, 0.2, 0.3 mm/rev - Motor: 2.9 kW

Būklė: geras (naudotas), Gamybos metai: 1983, Stock number: 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Spindle taper: MT 4 Speed range: 26 to 1,940 rpm Feed rate: 0.05 to 0.45 mm/rev Table size: 1,520 x 740 mm Clamping surface: 1,370 x 610 mm Lodjwu Ilwepfx Am Roag Arm reach min/max: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical adjustment of arm: mm Horizontal adjustment of arm: 720 mm Equipment/accessories: Power connection: 6.5 kW Footprint: 1,500 x 1,100 mm Second plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Būklė: geras (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 32 mm, bendras ilgis: 900 mm, plunksnos brūkšnys: 160 mm, bendras aukštis: 1 800 mm, bendras plotis: 950 mm, gerklės gylis: 630 mm, veleno greitis (min.): 75 aps./min, stalo ilgis: 800 mm, veleno greitis (maks.): 2 800 aps./min, stalo plotis: 500 mm, bendras svoris: 800 kg, galia: 1 kW (1,36 AG), Greitaeigio radialinis gręžimo įrenginys su lanksčiu rankenos mechanizmu, pneumatiniu tvirtinimu, išsikišimas 100–710 mm, gręžimo galingumas – Ø 30 mm, grąžto eiga – 160 mm, sukimosi greičiai – 80–2800 aps./min., variklio galia – 2 pavarų režimai, 1/1,4 kW, verpstės tvirtinimas – MK-4, automatinis padavimas, matmenys – 90 x 100 x 200 cm, svoris – apie 1000 kg. Lsdpfxjx Dmn Ho Am Reag

Gamybos metai: 2015, būklė: labai geros būklės (naudotas), Hobart Hochgeschwindigkeits-Dampfgarer Modell: 305GB Ljdpfofv Spcox Am Rsag Seriennummer: 97-0215-148 Baujahr 2015, Hochgeschwindigkeits-Dampfgarer, gart 42 Portionen Lachs in 1 Minute oder 66 Portionen Brokkolini (Spargelbrokkoli) in 30 Sekunden – außerordentliche beschleunigte Garmethoden; LED-Anzeige, automatische Auftaufunktion, 27 kW Leistung, auf fahrbarem Tablett-Kühlgestell, 3-phasig.

Būklė: naudotas, Gamybos metai: 1983, „Bruderer“ BSTA 50 HL su BBV 202/120, yra sandėlyje, pristatymo laikas – pagal užsakymą. Galima atitikti CE standartus. Laodpfozlqg Asx Am Rsg Susisiekite su mumis!

Būklė: naujas, New high-speed press from min. 63t up to max. 630t. We offer new mechanical and hydraulic presses for diverse applications, tailored individually to your requirements. Just let us know your needs and we will provide you with an attractive offer including installation and service. ISGEC has delivered to over 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh, and more than 200 presses to 40 Japanese customers. We are proud to be the official distribution partner since 2020 and look forward to your enquiry. Ledpogayiaofx Am Roag

Būklė: naudotas, Single-Column Hydraulic Press EXNER Type EEX 20 S Ref. No. 1615 Year of manufacture: 1980 Pressing force: 20 tons Throat depth: 180 mm Table size: 380 x 350 mm Table opening: Ø 50 mm Ram area: 310 x 250 mm Clamping pin: Ø 35 mm Ram stroke: 100 mm Max. installation height: 250 mm Table height above floor: 900 mm Ljdpfxjyz Dtde Am Rsag Downward speed: approx. 480 mm/s Upward speed: approx. 480 mm/s Working speed: 20 mm/s Hydraulic tank capacity: 110 liters Hydraulic operating pressure at 20 tons: 200 bar Motor power: 4 kW Power supply: 400 V, 50 Hz - Stroke initiation via two-hand control or light barrier - Modes: setup, two-hand operation, BWS - Light curtain SICK, type LVU with 1-stroke and 2-stroke modes and safety function - Fast approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable fixed stop - Press force adjustment manually via knurled knob - Control cabinet mounted on machine side - Operating manual and electrical schematic included - Stroke counter Required space (L x W x H): 1250 x 750 x 2000 mm Weight: 1.4 tons In good condition

Būklė: labai geros būklės (naudotas), Gamybos metai: 1983, Drilling capacity in steel (diameter): 32 mm Throat depth: 636 mm Maximum workpiece height: 720 mm Spindle speeds: 38 - 2000 rpm Thread cutting: 38 - 643 (rpm) Stroke: 450 mm Maximum spindle stroke: 170 mm Total power requirement: 6 kW Machine weight approx.: 1.9 t Space requirement approx.: 2.5 x 1.5 x 2.2 m Left/right rotation, thread cutting device Lsdpfx Amewvl Iro Rjag Infinitely variable feed rate

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Lajdpfsrn Riqsx Am Rjg Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Būklė: naudotas, Gamybos metai: 2003, veikimo valandos: 6 431 h, Jungheinrich ESE 20 High-Speed Electric Pallet Stacker RA2396 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90079958 Battery replaced: 2016 Inspection (TÜV): valid until 2023 Operating hours: 6,431 h Fork length: 1,150 mm Fork width outside: 540 mm Maximum load capacity: 2,000 kg Lift height: 125 mm Travel speed: 8.5–12.5 km/h Included features: - Combined instrument panel and information & service display - Fast charger 380V Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Lsdpowb I Hbsfx Am Rjag For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics

Būklė: naudotas, Gamybos metai: 2003, veikimo valandos: 4 267 h, Jungheinrich ESE 20 High-Speed Electric Pallet Stacker RA2397 Manufacturer: Jungheinrich Model: ESE 20 Year of manufacture: 2003 Serial number: 90074846 Battery replaced: 2016 TÜV inspection valid until: 2023 Operating hours: 4,267 h Fork length: 1,930 mm Outside fork width: 540 mm Maximum load capacity: 2,000 kg Lift height: 125 mm Travel speed: 8.5–12.5 km/h Included: Combination instrument and information/service display Fast charger 380V Prices quoted are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For personalised, expert advice, please feel free to contact us directly. You can reach us by phone or email. Ljdpfxewcqg Hs Am Rjag We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact partner for intralogistics.

Būklė: geras (naudotas), Gamybos metai: 1975, Crane Trolley Manufacturer: DEMAG Model: PL 168 NF Year: 1975 Load capacity: 3,200 kg Lifting height: 4 m Equipped with pendant control In good condition. Laodpfxoubbr To Am Rsg

Būklė: naudotas, Gamybos metai: 1968, Donau greito sukinio radialinė gręžimo staklės, tipas DR 32 Sukimosi greitis: 60 - 1800 aps./min Strėlės išsikišimas: 600 mm Ljdpfx Aex Hgkvem Roag Pagrindo plokštė: 100 x 1400 x 110 mm Sriegimo įrenginys Aušinimo skysčio sistema Staklių lempa Greito keitimo laikiklis su įdėklais Staklinis spaustuvas

Būklė: naudotas, Gamybos metai: 1991, Darbo stalas 600mm x 1200mm Konsolės eiga 600mm Įrankio tvirtinimas MK 3 Lasdpfsxpfglox Am Rog Gręžimo pajėgumas 28mm pliene Sriegimo įrenginys Aušinimo sistema Dokumentacija

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1980, Darbo stalas 500 mm x 1200 mm Laodpfx Amex N Ih Ie Rjg Išsikišimo eiga 600 mm Įrankio tvirtinimas MK 4 Gręžimo galia 32 mm pliene Sriegimo įrenginys Aušinimo įrenginys Apsaugos įtaisas ant grąžto Pilnai atnaujintas 2026 m.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Danumeric 440 – Fully Overhauled and Digitized in 2024 Machine Specifications • Work table 1800 x 600 mm with 4 T-slots • Overarm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety guard • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge to table top: min. 70 mm, max. 680 mm Distance spindle lower edge to floor: min. 970 mm, max. 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacity Max. drilling in solid material: • St 60: ⌀ 40 mm • GG 22: ⌀ 50 mm Thread cutting: • St 60: M36 • GG 22: M42 Main Spindle Drive AC motor, frequency-controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 2000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Precision Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Ledpsu Dg D Asfx Am Rsag Weight Danumeric 440 (without packaging) With table 1800 x 600 mm: 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat panel, backlit, clearly readable from all angles, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram functions: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirror functions, teach-in for X, Y, Z, restart in the program with selectable options for targeted re-entry Zero point determination: Cycles to determine zero points by manual probing of the workpiece for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of hole patterns Data interface: USB

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Ljdpfoxn A Spex Am Rjag Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming Laedpfsvv Spkex Am Rjg • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Gamybos metai: 1970, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 1258, Saw blade diameter: 315 mm Cutting capacity at 90° round: 90 mm Cutting capacity at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed rates: hydropneumatically steplessly adjustable Cut length: 5 - 1580 mm Saw drive: 380 V, 1.8/2.5 kW Ledpoh I Dvnjfx Am Roag Space requirements: 2300 x 1000 x 2800 mm Weight: 940 kg

Gamybos metai: 1985, būklė: beveik kaip naujas (naudotas), Wanzke Hydraulic High-Speed Press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press manufactured by Wanzke. This press is in mint condition! Technical Data: Manufacturer: Wanzke Type: SP/F 12 Pressing force: 120 kN Return force: 17.8 kN Overrun time: 0.028 seconds Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Power supply: 380V 50Hz Lasdpfxshgiyis Am Rsg Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety clearance: 4 mm Accessories: GM1 decoiler

Gamybos metai: 1985, būklė: beveik kaip naujas (naudotas), Wanzke Hydraulic High-Speed Press SP/F12 Double-Column Press -WKG 499- Offered here is a hydraulic high-speed press manufactured by Wanzke. This press is in like-new condition! There are two presses mounted on a single stand. Lajdpfx Amehgiwno Rsg Technical Data: Manufacturer: Wanzke Type: SP/F 12 Press Force: 120 kN Return Force: 17.8 kN Overrun Time: 0.028 sec Year of Manufacture: 1985 Main Drive: 1.5 kW / 1.5 kW Mains Voltage: 380V 50Hz Control Voltage: 220V 50Hz Overrun Distance: 2.8 mm Safety Distance: 4 mm Strokes per Minute: Working Stroke: 10 mm/sec Rapid Stroke: 20 mm/sec Max. Stroke: 100 mm Table Size: 320 x 300 x 280 mm Accessories: Double decoiler type GMD1 Digital functional control “Tronic press” with full CNC upgrade capability. A total of 2 units are available!

Būklė: naujas, Gamybos metai: 2026, gręžimo pajėgumas: 40 mm, gerklės gylis: 1 220 mm, veleno greitis (min.): 110 aps./min, veleno greitis (maks.): 2 900 aps./min, bendras svoris: 1 710 kg, spindelio eiga: 200 mm, veleno tvirtinimas: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Tool holder short taper spindle: MK 4 Distance spindle center to column min. - max.: approx. 210 - 1220 mm Lajdpfstzkmbox Am Rsg Clamping surface machine table: approx. 1200 x 510 mm T-slots in machine table: Number x Width: 3 x 18 mm Distance drill spindle – table min. - max.: approx. 375 - 675 mm Distance drill spindle – base plate (= option) min. - max.: approx. 1075 - 1375 mm Spindle stroke: approx. 200 mm Feeds approx. (4): 0.08 - 0.1 - 0.2 - 0.3 mm/rev Main spindle speed range: stepless 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Drive motor power, spindle: 400 V, 50 Hz, approx. 2.2 / 4.0 kW

Būklė: naudotas, Gamybos metai: 1978, Machine no.: 40 1008 Rated current: 20 A Ljdpfx Amowg Hunj Rjag Voltage: 24 V Machine weight: approx. 3.5 t

Būklė: naudotas, Funkcionalumas: nepatikrintas, Greitaeigiai vartai, naudoti, išmontuoti, įvairių dydžių, kaina už vartus 100,00 € Lsdsynnv Ijpfx Am Reag