Greitaeigis radialinis grąžtas

Gillardon HKS HKS 34 MT und GSR 32

Sąlyga: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 700 mm, tekėjimo ilgis: 6 000 mm, ašies variklio galia: 30 W, Tekinys yra geros techninės būklės, prijungtas, galima išbandyti, skaitmeninis matavimas, priekio plokštė, lunetos. Nkodsx A S Sbopfx Agieu

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Apsisukimo diametras virš lovos: 400 mm Apsisukimo diametras virš skersinio stalo: 220 mm Atstumas tarp centrų: 1500 mm Veleno skylė: 50 mm Sukimosi greitis: 12,5 – 3150 aps./min. Galia: 5,5 kW Energijos poreikis: 16 kVA Matmenys (Ilg. x Pl. x Aukšt.): 2900 x 1000 x 2200 mm Svoris: apie 1600 kg Įranga, priedai Nsdpfxexiymtj Agioku - 3 žandikaulių griebtuvas, D200 mm tvirtinimo griebtuvas - 4 padėčių įrankių laikiklis - Užpakalinis centras - Variklio apkrovos indikacija - Greitos eigos judesiai - Pavaros sistema per sankabą - Veleno stabdis - Galinė apsauga nuo taškymosi - Grūdintos ir šlifuotos kreiptuvės puikios būklės - Atraminis lankas - Aušinimo skysčio sistema - Dokumentacija Staklės naudotos nedaug, labai geros būklės. Judėjimo matavimo sistemos nėra įrengta.

Sąlyga: geras (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, gręžimo pajėgumas: 40 mm, plunksnos brūkšnys: 200 mm, quill skersmuo: 80 mm, Machine Configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm at the rear of the machine base Nsdpfx Aju Aa I Sogioku • 2 T-slots 18 mm on the left side of the machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – table surface min. mm 70 / max. mm 680 Distance spindle nose – floor min. mm 970 / max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: rpm 15 – 2800 Torque Nm max. 250 constant between rpm 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds stepless mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly legible from all sides, 215 x 160 mm Positioning information: Cartesian or polar, values absolute or incremental, mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogramming: yes Machining Cycles Standard Software Options: Conversational programming, 38 work offset positions, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable functions for targeted program re-entry Zero point determination: Cycles for determining reference points by manually probing the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Aligning cast and flame-cut parts - Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data Interfaces: USB

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Stalo dydis: 800 x 240 mm Darbinis paviršius: 730 x 210 mm „T“ formos griovelio dydis ant stalo: 14 mm (M12) Sūkių diapazonas: 75 – 3200 aps./min Gręžimo geba ketuje: 45 mm Gręžimo geba pliene: 32 mm Išilginė eiga (X): 560 mm Skersinė eiga (Y): 190 mm Vertikali eiga (Z): 350 mm Įrankių laikiklis: ISO40/Morse 4 Atstumas tarp veleno ir kolonos: 460 mm Atstumas tarp veleno galo ir stalo paviršiaus: 445 mm Veleno eiga: 120 mm Bendras mašinos aukštis aukščiausioje Z padėtyje: 1450 mm Velenas reguliuojamas +/-90 laipsnių Variklio galia: 1,1/1,5 kW / 400 V Mašinos svoris: 480 kg Išmatavimai: 1280 x 960 x 2100 mm Priedai - Sriegimo funkcija - 3 ašių atvaizdavimo sistema - Y+Z ašių apsaugos - ISO40 griebtuvo adapteris - Integruotas skaitmeninis gylio matuoklis - Automatinė vientisa ir greitoji eiga X ašyje - Motorizuotas veleno stiebo pakėlimas ir nuleidimas - Halogeninė lempa - Ketaus mašinos pagrindas Nkedoxz D Npjpfx Agisu Mašina yra visiškai nauja - niekada nebuvo naudota gamyboje.

Sąlyga: geras (naudotas), Gamybos metai: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drill and milling machine, model making mill - Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories - Rotatable cross table: 490 x 400 mm - Travel (X/Y/Z): 320/385/430 mm - Spindle taper: SK30 - Drive: 1.1 kW - Speeds: 560 to 14,000 rpm, 8 steps - Accessories: included, see photos - Dimensions: 1000/680/H1970 mm - Weight: 477 kg Nkodpfxenzpx Ro Agisu

Sąlyga: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Nkodpfx Agju Ix E Heisu Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Sąlyga: labai geros būklės (naudotas), Knuth UFM 2 universalioji frezavimo staklė Techniniai duomenys X ašies eiga (rankinė) 800 mm X ašies eiga 750 mm Y ašies eiga 300 mm Z ašies eiga 400 mm Stalo dydis 1320x320 mm T formos grioveliai 5x14x63 mm Pavaros Y ašies eiga (8) 20 - 360 mm/min Z ašies eiga 600 mm/min Veleno apsukos (12) 58 - 1800 min-1 Vertikalaus veleno konusas SK 40 Atstumas tarp veleno galo ir stalo 0 - 400 mm Galvos pasukimas 45° Horizontalaus veleno konusas SK 50 Pavaros Nsdpfx Agenfu Risioku Pagrindinio variklio galia 4 kW Z ašies variklio galia 0,75 kW Pavaros variklio galia 0,55 kW Aušinimo siurblio variklis 0,09 kW Aušinimo skysčio siurblio našumas 25 l/min Matmenys ir svoris Matmenys 1900x1720x1750 mm Svoris 2100 kg Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina – pagal užklausą!

Sąlyga: naujas, Capaciteit, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radiusverschil ----- 90 mm Buigsnelheid/herhaalbaarheid ----- 500º/s. ±0,05° Buislengte ----- 1.350 ∞ mm Gewicht ----- 2.200 kg Machineafmetingen ----- 3,0 x 1,2 x 1,3 m Buisrotatie ----- 0–850°/sec Lengteaanvoer ----- Standaard 0–2.400 mm/sec Booster ----- 0–1.200 mm/sec Tolerantiegraad ----- 0,05°/mm Nsdpfx Agoga T Exjioku Draaibeweging van de buigkop ----- 0,75 sec Standaard componenten voldoen aan VDMA-, ISO- en DIN-normen. OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasnaaddetector en buispositioneerder via elektromagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Collision Control * Verlenging van het bed

Sąlyga: naujas, TC 165 x 750V Image shows MIOTAL® TC 180 x 1000 Centre distance: 750 mm Centre height: 165 mm Swing over bed: Ø 330 mm Bed width: 190 mm Cross slide travel: 160 mm Top slide travel: 90 mm Spindle mount: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical speed ranges: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Cross feeds X: (40) 0.022 - 0.98 mm/rev Metric threads: (32) 0.4 - 7.0 mm Inch threads: (32) 4 - 56 TPI Module threads: (32) 0.4 - 7.0 Diametral pitch threads: (32) 7.5 - 112 Tailstock quill diameter: Ø 40 mm Tailstock quill taper: MT 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 650 kg Features: - Acceptance certificate according to DIN - Precise, hardened and ground guideways - Robust headstock with oil circulation lubrication, precision spindle bearings, gears hardened and ground for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric brake system (V models) - Torsion-resistant machine beds made from MEEHANITE quality cast iron, stress-relieved and heavily ribbed for maximum running smoothness - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Impulse pushbutton for main spindle - CE / IEC and German documentation and service Nksdpoir Igwefx Agisu Standard equipment (included accessories): - Machine stand with splash guard rear wall - 3-jaw chuck - 4-position toolpost - Foot pedal with mechanical brake - Coolant system - Chuck and spindle guard compliant with European CE safety standards - 1 fixed centre for main spindle - 1 fixed centre MK3 - 1 test certificate - Safety devices and electrical equipment according to CE - Reducing sleeve for main spindle operating tools Available options for this lathe: - 3-axis digital readout - Quick-change toolpost system Multifix Also available as a geared version

Gamybos metai: 2012, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: ENOG, DEMAG KBK crane runway (crane track), approx. 8x4m Load capacity: 250 KG (0.25 tons) Technical data: - Crane runway made from Demag KBK1 + KBK2 rails The system is delivered complete, including: - KBK rails - Rail connectors - Trolleys - End plates - Cable drag chain - Suspension brackets/hangers etc. Nedpfx Agomqf Nfsijku Including Demag DC-COM 250 KG electric chain hoist The crane is dismantled and available immediately. Used condition, see pictures. Item location: 75053 Gondelsheim Shipping via freight carrier or pickup by appointment only. Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems also available. Load capacities from 125 KG to 1,600 KG. Please inquire about your desired crane runway with overhang and dimensions.