Ganner Gannomat pirkti naudotą (73)

Būklė: naudotas, used Make: Ganner Model: Superdrill Number of spindles: 19 pcs Spindle pitch / spacing: 32 mm Hydraulic feed brake Lodpfxjvwf R Ro Agfshd 2 stop rails, lengths approx. 3.0 m / 1.5 m Working width: 640 mm Drilling depth: 95 mm / 110 mm Drill chuck diameter: 10 mm 6 swinging stops 3 clamps Row drilling device Frame dowel device Required space: approx. 1400 mm x 900 mm x 1200 mm Total connected load: 1.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition as inspected, without overhaul without warranty or guarantee

Būklė: naudotas, Gamybos metai: 2022, New display machine! List price: €14,200. 400V, 3Ph, 50Hz / 1.5 kW Fully equipped in standard configuration with: - Fully automatic electronic control with pulse operation via foot pedal for clamping–drilling–unclamping; - Electric automatic return of the drilling unit after reaching the set drilling depth; - Automatic drilling depth extension for face drilling saves readjustment between flat and face holes (+10 mm, e.g. for dowel length 35 mm, drilling depth flat surface 14 mm, drilling depth face side 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0–70 mm). - Includes 21 quick-change chucks (Ganner system) for easy bit replacement. - Drilling unit swivels from 0° to 90°, assisted by gas cylinder. - 1 clamping carrier movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece heights up to max. 80 mm. - Complete stop system consisting of: - 1 stop rail, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 position stops and quick-change system, easily switchable from right to left for mirrored shelf drilling in cabinet construction; also suitable for line drilling in the 32 mm system. - Stops and position settings as well as drilling height adjustment via support table with mechanical digital display. Stops can be swung out for quick conversion from cabinet to frame and vice versa. - Arms for clamping carrier made for line drilling up to max. 300 mm position. Ideal three-stage tooling system. - 1 set of dowel drills: 5 carbide dowel drills, Ø 8x77 mm, right; 4 carbide dowel drills, Ø 8x77 mm, left. Additional equipment: - Extraction funnel, dust-tested, Ø 120 mm. - Complete set for line drilling in the 32 mm system with: - 2 guides with scale and adapter for positions up to max. 300 mm, - 2 pairs of position cams for row drilling at Y-position 37 mm and e.g. 300 mm, - 1 base rail 1000 mm (aluminum profile 40x40 mm), - 1 setting gauge for line drilling. - 1 set of drills: Lhedpfxeqw Ek Ie Agfsd - 11 carbide line drills, Ø 5x57 mm, right; - 10 carbide line drills, Ø 5x57 mm, left. - Hydraulic brake cylinder. - Additional clamping cylinder with bracket. Location:

Būklė: naudotas, Gamybos metai: 2023, New demonstration machine! List price: €86,567 net. Base machine complete in standard configuration for drilling and grooving. For detailed technical specifications, please refer to the data sheet for ProTec Type 0571. Working unit with: PowerBlock with 21 spindles and 1 grooving saw: - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y Fourth drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency inverter, reversible rotation, for HSK63F tool holders with ER 462E/OZ25 collet chuck, cutter length up to 130 mm. Information: MultiUnit machining head with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit. Connection values: - Connected load: 12 kVA - Rated current: 17.5 A Lhodpfjw Tfzfjx Agfed - Fuse: 32 A - Voltage: 400 V, 50 Hz, 3-phase (without transformer) - Network: TN or TT - Pneumatic connection: 7 bar (102 psi) On the machine: Coupling plug (quick coupling) ¼", DN7.2, brass, factory-fitted To the machine: Coupling socket (quick coupling) ¼", DN7.2, brass, customer side Supply line, minimum hose internal diameter 12 mm Compressed air demand: Continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction: - Connection: 3 x extraction nozzles, Ø 80 mm - Extraction speed: 30 m/sec (measured at extraction nozzle) - Extraction requirement: min. approx. 2500 m³/h Machine weight: approx. 1650 kg (with options!) Machine installation site: A ProTec fix can, in principle, be bolted to the floor. A concrete floor (or foundation) is required—at least at the four machine corners/feet. Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Folding roller table 765 mm (Y-axis), for machine front, width 500 mm - Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamellar curtain - Necessary for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill set for Protec: - Shank Ø 10 mm with clamping surface (JSO) - 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L - 3 HW dowel drills 5x70mm (NL 35mm), RH #30540-5-05035-R - 4 HW dowel drills 5x70mm (NL 35mm), LH #30540-5-05035-L - 3 HW dowel drills 8x70mm (NL 35mm), RH #30540-5-08035-R - 5 HW dowel drills 8x70mm (NL 35mm), LH #30540-5-08035-L - 2 HW dowel drills 10x70mm (NL 35mm), LH #30540-5-10035-L - 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L - 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R - 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R - HW grooving cutter Ø 125/30 mm - Groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and after consultation Tool holders HSK63F 3 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm, 3 pcs Insert cutter shank Z1+1, 1 pc HW with reversible knife drill tip Ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW insert Z1, 1 pc with reversible knife drill tip, D Ø10 mm, d Ø10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separately) Decorative

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Technical Data: Lamella carcass press from our showroom; Working range: width from 150 - 2,550 mm, height from 150 - 1,400 mm; depth from 150 - 700 mm; Variable pressing force adjustment of the side press beam: 300/700/1100/1400/1800/2200 dN(kg); Variable pressing force adjustment of the top press beam: 500/800/1200/1500/1900/2200 dN(kg); Lhjdjb Eln Dopfx Agfjd Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. The machine is available in our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg

Būklė: naujas, Gamybos metai: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND SLOT BORING MACHINE ESPECIALLY FOR STAIRCASE CONSTRUCTION Complete in standard design according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets, Ø 3-26 mm incl. collets Ø 10 / 13 / 16 / 20 - Two-speed switchover motor 1400/2800 rpm, 1.5 kW - Linear laser with holder - Boring unit, steplessly rotatable from the front (65°-0°-65°) - Position adjustment via digital counter - Positioning adjustment for 2 levels, pneumatic (0-100 mm) - Max. drilling depth 200 mm - Precision indexing rail with 12 mm increments, with central locking t and cross adjustment of 320 mm - Complete stop system consisting of: 1 central stop and 1 stop for extra-wide frames 1 stop bar approx. 850 mm long (can be relocated from left to right in mirror image) 2 folding stops - Slot mortising device, retractable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter fence adjustable 0°-60° Pneumatic clamping of the X-axis with on/off switch on the indexing lever Pair of workpiece support arms, swivelling (left and right) Clamping column can be repositioned to the front Ljdpfsxdttpjx Agfehd Chassis with 4 wheels for easy transport of the machine 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm made of chrome steel with centering tip Availability: short notice

Būklė: naujas, Gamybos metai: 2026, SURFACE CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Complete in standard configuration with: Lhedpfxsw Sgnko Agfjd - Sturdy, torsion-resistant steel frame, welded and bolted construction - Lateral pressing beam featuring a continuous pressure surface with a 25 mm thick, coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick, coated support plates - Electromotive adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased lead and concentricity accuracy) and high-performance slide nuts with grease reservoir - Pressing is electromotive via a worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely electronically adjustable by potentiometer and regulated via frequency converter, ensuring completely wear-free press force control - Pressing force for vertical pressing beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, controlled via 3-position selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of the pressing beam, e.g., for low pressing forces such as drawers, etc. - Simple operation via 2 separate push buttons, 2 movement sequences (Open/Close) selectable from the control panel - Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours) with individually programmable opening dimensions for both pressing beams - Repress function to increase or decrease pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Minimum length: 150 mm, Maximum length: 1300 mm Minimum height: 150 mm, Maximum height: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Availability: short notice

Būklė: naujas, Gamybos metai: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard version with: - Support with linear guidance consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for 8 mm Ø dowels, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traverse speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position over table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth from 0–35 mm (with drill length GL 70 mm) automatically set with dowel projection - Closed gluing system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity of 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 liters water - Indicator lamp for glue level display in glue container Lhjdpew Sgm Hsfx Agfed - 1 pc. left side fence, 1 pc. right side fence (both removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic inclined clamping cylinders 10° for workpiece thickness up to max. 80 mm, minimum workpiece length (Y) 70 mm - 1 pc. suction hood, connection Ø 80 mm - 1 pc. TCT control with: Built-in industrial PC incl. Soft PLC Beckhoff TWINCAT, operating temperature range 0–50°C, 15" capacitive TFT industrial touchscreen display, Operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-driven user software, drilling positions freely programmable with ABSOLUTE, RELATIVE or GRID dimensions, automatic workpiece mirroring and operation optimization, two workzones programmable with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, plain text error diagnostics - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle Art. no. 0470-0810 - 1 EASY CLEAN system for automatic test glue shots prior to the start of the work program (drilling/gluing/dowel insertion). E.C.S. for 1 pc. glue nozzle Art. no. 0471-Z010 - 1 single-spindle vertical drilling unit, drilling from above, 0.65 kW (3000/5000/8000 rpm), Y-position manually adjustable via mechanical digital counter from 5–40 mm, max. drilling depth (Z) 30 mm (with drill length GL 57 mm). Max. workpiece thickness (Z) 50 mm, minimum workpiece length (Y) 130 mm (incl. drilling depth compensation, e.g. for Häfele Minifix) Art. no. 0471-0830 - 4 vertical inclined clamping cylinders 10° with holder, additional, Art. no. 0470-0850 Available: at short notice

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) Lhedpoiidm Nofx Agfsd - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, DÜBELEINSUKIMO APARATAS GANNER SELEKTA 252 Ledpfx Ajycf Ikjgfehd GAMYBOS METAI: 2009

Būklė: naudotas, Gamybos metai: 1999, mašinos/transporto priemonės numeris: 1088.968, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 55 h, bendras plotis: 700 mm, bendras ilgis: 900 mm, bendras aukštis: 650 mm, bendras svoris: 70 kg, ašies skaičius: 5, Siūlome šią naudotą Gannomat Modell204 furnitūros gręžimo staklę, pagamintą 1999 m. Lhedpfx Ageyak Hyefed

Būklė: naujas, Gamybos metai: 2025, Advantages of Pre-glued Dowels • No additional glue required when shooting the dowel • No cleaning effort for the water supply system Advantages of DübelJet • Recoil-free gun • Simple handling • Mobile handheld device • Versatile application range Technical Data of DübelJet Dowel system and water supply system designed for pre-glued dowels • Dowel diameter: 8 mm • Dowel length: 35 mm (factory setting, adjustable from 30 to 40 mm) • Dowel projection: 12 mm (factory setting, adjustable from 7 to 20 mm) Versatile Application Range • Driving in pre-glued dowels (with water), especially in furniture manufacturing • Driving in positioning dowels (without water) made of wood or plastic, e.g., in frame construction or in combination with screws or carcass connectors Lhjdpfx Ajwu Dnnogfsd

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, CNC-controlled precision machining center Gannomat Type Protec 571 CNC • For drilling, grooving, and milling Machining unit with PowerBlock featuring 21 spindles and 1 grooving saw: • Vertical drilling spindles: 13 • Horizontal drilling spindles in Y: 6 • Horizontal drilling spindles in X: 2 • Grooving unit in Y: 1 • Milling unit 'Profit': 4.5 kW, 3000 - 18000 rpm, with frequency converter Lhsdpfowvk Auex Agfed • Workpiece width (X): min. 85 mm / max. 1000 mm • Workpiece thickness (Z): min. 6 mm / max. 60 mm • Workpiece length (Y): min. 285 mm in through-feed mode / max. 5600 mm programmable in software • Workpiece weight: max. 70 kg Processing speeds per axis: • On the X-axis: max. 90 m/min • On the Y-axis: max. 30 m/min • On the Z-axis: max. 15 m/min

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, Gannomat Model 260 Carcase Press Clamping dimensions: 2500 x 1250 x 650 mm Working pressure: 0-10 bar Cylinder stroke: 110 mm Space requirement: 3240 x 2120 x 770 mm Weight: 900 kg Year of manufacture: 2010 Lhjdpfx Ajrfbnbsgfsd CE compliant The machine is currently being refurbished; further photos will be available shortly.

Būklė: naudotas, Gamybos metai: 2017, Gręžimo velenų kiekis: 21 vnt Žingsnis: 32 mm Grąžto tvirtinimas: Grąžto kotelio spaudimo paviršius: 10 mm Valdymas: kojinis pedalas Įrankiai: Taip Gręžimo kryptis: iš apačios ir iš priekio Pasukimas: rankinis Lhodpsihghrjfx Agfsd Pasukimo kampas: tik 0° arba 90° Maks. laisvas aukštis: 80 mm Maks. laisvas plotis: 750 mm Medžiagos spaustuvų kiekis: 3 vnt Medžiagos prispaudimo tipas: pneumatinis Tipas: stacionarus Atramos sistema: tik konstrukcijų serijai Svoris apie: 400 kg Variklio galia: 1,5 kW Nusiurbimo skersmuo: 120 mm Sandėliavimo vieta: pas klientą

Būklė: naudotas, Gamybos metai: 2024, New demonstration machine! List price: €32,665 complete in standard configuration with: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Top lamella pressure beam with 6 elements; side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly pressed carcass joints - Back pressure surfaces (side pressure wall and base) are continuous, coated support panels, 38 mm thick - Continuous pressing surface with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir - Pressing is performed electromotively via two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and controlled by a frequency converter, resulting in absolutely wear-free press force regulation - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to max. 2200 daN (kg), infinitely adjustable Lhjdpfxeuf Hx He Agfod - Pressing force for vertical pressure beam: min. 300 daN (kg) up to max. 2200 daN (kg), infinitely adjustable - Pressing and adjustment speed of pressure beams with fine positioning via 3-step selector switch: 5 / 10 / 25 mm/second - Simple operation via 6 individual push buttons; 8 movement sequences selectable via the control system - Freely adjustable press time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm - Weight: approx. 1800 kg - Net dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m - Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Additional equipment: - Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams; pressing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm) Storage location:

Būklė: geras (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, dvivietė skylučių gręžimo mašina GANNER, kiekvienoje eilėje po 21 veleną Lodpfxjxlt T So Agfjhd

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Gannomat Concept 70 Eco Cabinet Press Lhsdpfsvxgrrex Agfod Year of manufacture: 2025 including the following options: - Rapid traverse speed: adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing, as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Minimum pressing force: 300/500 daN (kg) for Concept Eco, minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco, maximum pressing force: 3500 daN (kg) for Concept Primus • Three pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely selectable pressing time preset with automatic opening • Concept Eco: Simplest operation via six separate pushbuttons for eight movement sequences • Concept Primus: Simplest operation via LCD display Universal application: • Cabinets, e.g. for furniture and cupboards • Mitered carcases • Carcases with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple cabinets / drawers Advantages: • Proven tolerance compensation (GANNOMAT system) • Electromechanical cabinet press with frequency-controlled gear motors • Independently adjustable vertical and horizontal pressing beams • Extended service life thanks to proven, high-quality components • Sturdy and robust construction • Space-saving design • Cabinet pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy to operate via straightforward and practical control panel • Fast thanks to beam positioning speeds up to 50 mm/sec (optional) • Efficient due to precise pressing of various carcass sizes • Flexible through adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture cabinets and drawers • Professional production of cabinets and drawers with a modern cabinet press

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Motors: 2 x 1.85A, 50Hz, 380V, 2800 RPM Lhedpfx Asv Nptmegfod Operating air pressure: 6 bar 30 spindles, diameter 10 mm, mounting Combined foot switch Emergency stop switch Main switch Height adjustment: manual Side adjustment: manual

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, two speeds: 1400 rpm at 1.1 kW, 2800 rpm at 1.5 kW air connection 6 bar fully automatic pneumatic control with foot valve additional switch for "chip removal" program Ledev Npw Espfx Agfjhd T-type drilling head with 7+2 drilling spindles, 32 mm pitch drill shank diameter 10 mm swivels 90°, with locking undercarriage

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Power supply: 380V, 3.3A Motor power: 1.1 kW, 2800 rpm Automatic pneumatic control with control panel Drilling head with 23 spindles, 32 mm pitch Adjustable drilling depth Drill shank: 10 mm Position adjustment: 5–60 mm Clamping height: 80 mm Pass-through width: 800 mm Dimensions: 1200 x 900 mm Weight: approx. 400 kg Includes: 1x template for row drilling 1x template for side stop 1x stop guide rail 1500 mm 1x stop guide rail 2000 mm Lhodpoq Auwtefx Agfjd

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Drilling and inserting machine for all types of furniture fittings, row drilling and group hole drilling machine in System 32 Power supply: 400V 0.75kW Spindle speed: 2,800 rpm Stop ruler: 960 mm 2x swivel stops Ljdpfxeumw Sbo Agfshd For drill bits with shaft diameter 10 mm Maximum workpiece thickness: 40 mm Includes: 1x 7-spindle drilling head for row drilling, 32 mm pitch, with integrated locking pins Manual feed Base frame Available at extra cost: Olive drilling head €450.00 Mepla drilling head with insertion die €550.00 Hettich drilling head with insertion die €550.00

Būklė: naudotas, No. 3238 Dowel Drilling Machine Gannomat Combi RB 110 Used Precision universal dowel hole drilling machine for cabinet, frame, fitting, and line boring operations in System 32. The table and drilling beam can be pneumatically swivelled 90° together. Short workpieces can be inserted vertically. Easy drilling for cup hinges and connecting fittings. Mitre and flat frame drilling. Drilling from below. Drilling on longitudinal and cross rails at the center stop. Fully automatic pneumatic control with control panel. Working width: 800 mm. Drilling beam: 23 spindles, 32 mm pitch. Drilling stroke: 75 mm. Drill unit position adjustment: 0 - 60 or 110 mm. Spindle speed: 2,800 rpm. Drill shank diameter: 10 mm. Maximum clamping height of workpieces: 80 mm. Motor: 1.5 kW, 380 V. Compressed air connection: 6 bar. Approx. weight: 450 kg Sale on behalf of customer, ex-location near 69124 Heidelberg, without dismantling, transport, or installation. Dismantling, loading, and transport by us available as an option. Subject to errors in description and price. To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as is. Technical data, condition description, year of construction, and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the following applies: “purchased as inspected.” Images and videos serve as examples and do not represent the actual scope of delivery. Terms of payment: Ljdpfx Agew Id T Njfohd Prices plus statutory VAT, payment before collection or shipping. Delivery terms: Ex location.

Būklė: naujas, Gamybos metai: 2026, Efektyvus klijų padengimas baldų gamyboje: dylių skylėse ir galinėse grioveliuose, taip pat klijavimas rėmų, langų ir durų gamyboje: dylių skylės, įlaidų ir kaiščių sujungimai. Trumpas pristatymas: • Universalus klijų padengimo įrenginys • Taupantis laiką – paprastas – švarus • Įvairūs purkštukai ir antgaliai • Mobilus Universalios naudojimo sritys: • Klijavimas dylių skylėse • Klijavimas grioveliuose galinėms sienelėms • Klijavimas briaunų paviršių • Klijavimas bendraminčių paviršių • Klijavimas įlaidų ir kaiščių • Dalių suklijavimas spintoms, korpusams, stalčiams Ljdpfx Aehnddzsgfjhd • Dalių suklijavimas rėmams • Dalių suklijavimas langams ir durims • Plokščių ir masyvo komponentų apdirbimas

Būklė: naujas, Gamybos metai: 2026, Kampinio laikiklio ir alyvuogių gręžimo staklės tiksliam ir produktyviam langų elementų gręžimui. Trumpas pristatymas: • Jokio perstatymo tarp kampinio laikiklio ir alyvuogių gręžimų • Gręžimo iš apačios pranašumai Lsdpfxsdx R Hzj Agfshd • Priedų komplektas kampinio laikiklio gręžimui • Gręžinių schema pagal gamintoją (pvz.: G-U, Roto, Maco, Siegenia Aubi, Winkhaus ... ir kiti gamintojai) • Priedų komplektas alyvuogių gręžimui • Tvirtas precizinis gręžimo reduktorius iš GANNOMAT

Būklė: naujas, Gamybos metai: 2026, Concept Eco ir Concept Primus yra idealios montavimo pagalbinės priemonės kaiščių jungtims tvirtinant korpusus bei gaminant stalčius. Ljdpfx Agsdx R Dmjfohd Trumpai apie produktą: • Praktikoje patikrinta tolerancijos kompensacija (GANNOMAT sistema) • 2 potenciometrai bepakopiam spaudimo jėgos reguliavimui • Minimali spaudimo jėga 300/500 daN (kg) – Concept Eco; Minimali spaudimo jėga 600/800 daN (kg) – Concept Primus; • Didžiausia spaudimo jėga 2200 daN (kg) – Concept Eco; Didžiausia spaudimo jėga 3500 daN (kg) – Concept Primus; • 3 spaudimo ir reguliavimo greičiai: 5 / 10 / 25 mm/sek. (su tiksliu pozicionavimu/lėtu režimu) • Laisvai nustatomas presavimo laiko pasirinkimas su automatinio atidarymo funkcija • Paprastas valdymas per 6 atskirus mygtukus 8 judesių sekai