Frezavimo Irankiai pirkti naudotą (35 268)

Būklė: dilaminuotas dirbtuvėje (naudotas), padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 160 mm, padavimo ilgis Z ašis: 340 mm, Updated Machineseeker Description (with Travel Paths) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Ready for Immediate Use Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single-part and small-series production. This is not an unchecked used machine, but a technically overhauled tool machine with a clearly defined scope of performance and predictable delivery time. Technical Data & Features Travel paths: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Braking motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Fine adjustment of all existing settings Renewal of all lubricants Replacement of selected standard and various wear parts Repainted in RAL 7035 / 7016 Dcedpfx Ajx Tdy Isahed The conscious decision for a partial overhaul offers an optimal compromise between operational safety, cost-effectiveness, and availability. A full overhaul of the guideways was not carried out, as there was no technical necessity for this. Delivery Scope Machine loaded free on truck Delivery time approx. 12 weeks

Būklė: geras (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electronic hand controller - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Spindle speed: 31.5 - 3,150 rpm with 21 gear steps Feed rate: 4-2000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Dcsdpfx Aaowid Spehed Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilting: 15°/45° - B-axis swiveling: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional features: - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space including auxiliary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and in operation by appointment.

Būklė: paruoštas naudoti (naudotas), X ašies eiga: 300 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 340 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, frezos galvos padėtis: SK40, įėjimo įtampa: 400 V, Deckel FP1 2-axis Active Travels: X = 300 mm Y = 160 mm Z = 340 mm Spindle speed: 40–2000 rpm Automatic feed and rapid traverse on X, Y and Z axes. Infinitely variable. Dcodsvuzg Aopfx Aahsd Table size: 600 x 260 mm 2-axis Aktiv control, point-to-point operation. 3-axis digital readout by Heidenhain. Spindle taper: SK40 Deckel (external thread connection).

Būklė: labai geros būklės (naudotas), Diameter Ø 700 x 25 mm Siegfried Volz Machine Tools Dcjdpfswz Nbmjx Aahod Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: geras (naudotas), Grooving discs, window milling tool, indexable inserts, window production tool - Grooving discs, milling tool for: wooden windows - ZUANI Super Compact Fix - Left-hand tool Dcsdpfeb A S U Rsx Aahod - Bore: Ø 50 mm - Weight: 14 kg

Būklė: geras (naudotas), Parduodama iš dalies restauruota frezavimo staklė DECKEL FP1 aktiv su 3 ašių Heidenhain skaitmenine indikacija TNC 113 ir dalijimo stalu su trijų žandikaulių griebtuvu. Dėl kompaktiškos konstrukcijos puikiai tinka mažai hobių dirbtuvei ar garažui. Gamintojas: DECKEL Tipas: FP1 Staklių Nr.: 2102-3314 - Eiga X/Y/Z 300x160x340 mm - Sukimosi greičio diapazonas 40–2000 aps./min - Trys ašys be pakopų reguliuojamu poslinkiu - Greitas poslinkis visose trijose ašyse - Vertikalioji frezavimo galva - 100 mm horizontali eiga - vertikaliai Djdpfx Aoxmggueahjcd - Horizontalioji frezavimo įranga - 3 ašių Heidenhain skaitmeninis indikatorius TNC113 - Aušinimo sistema - Dalijimo stalas su trijų žandikaulių griebtuvu Bendra galia: 1,9 kW Staklių matmenys (I x P x A): 1,30 x 1,10 x 1,60 m Svoris: apie 850 kg Kaina nurodyta be PVM, atsiėmimas iš sandėlio. Būklė: naudota.

Būklė: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 21207004, Pasiūlymas 25434 Techniniai duomenys: - Ašių darbinė eiga - X (išilginė) / Y (skersinė) / Z (vertikali) 750 / 380 / 380 mm - Stalo matmenys 1300 x 300 mm - Įrankio tvirtinimas ISO 40 - Automatinis grąžto įpresavimo pastūma - Įpresavimo eiga - Sriegimo įrenginys 140 mm - Atstumas tarp vertikalios ašies ir stalo 20 - 540 mm - Darbinio veleno apsisukimų dažnis 80 - 3800 aps/min - X – Y ir Z ašių pastūma Dcjdpex Dl Hhsfx Aahsd - Greita eiga 1400 mm/min - 45° į kairę ir dešinę pasukamas vertikalus frezavimo galvutė - 360° pasukamas viršutinis svirtis - Aušinimo skysčio sistema - Pavara 400 V / 5,0 kW - Užimama vieta apie Plotis 2000 x Aukštis 2500 x Gylis 2100 mm - Svoris apie 2200 kg - Atskiroje darbastalio / įrankių spintoje su įvairia priedais

Būklė: geras (naudotas), Wood milling cutter, cutter head, milling tool, wood router, profile cutter - Outer diameter: 170 mm - Quantity: 9 cutters Dedob A Sqfspfx Aahocd - 4x: left-handed - 5x: right-handed - Price: complete set - Weight: 3.8 kg/piece

Būklė: geras (naudotas), Disc milling cutter, saw blade, cutter -various: diameters -Type: HSS/E Dedpfx Asb A Streahjcd -Price: per set -Quantity: 2 sets available -Weight per set: 3 kg

Būklė: geras (naudotas), Gamybos metai: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control, Year 1990, Completely Overhauled in 2014, Excellent CONDITION, CE-Compliant!! The machine comes from the training workshop at Continental. Technical Data: Year of manufacture: 1990 Completely overhauled: 2014 Digital readout: 3-axis active digital display HEIDENHAIN TNC 113 Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: Dcedpfx Aaeyalcpjhed 400 mm Tool holder: SK 40 hydraulic tool clamping DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 - 2,500 rpm, 18 steps Table type: Swivel table Clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Equipment: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts lists, control manual and programming examples Handwheels Coolant system About the machine: Offered is a Deckel FP 4 MK tool milling machine with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It comes from a facility where it was used only sparingly for training purposes. The control is very easy to operate. The machine features hydraulic clamping both vertically and horizontally. Changing from vertical to horizontal setup is very simple by folding away the vertical head. The guides are regularly lubricated via the central lubrication system. The Deckel has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Deckel under power at our premises. You will find further milling machines from renowned manufacturers on our website.

Būklė: naudotas, Gamybos metai: 1997, Metai: 1997 Djdpowtd Dyofx Aahocd Stalas: 1780 x 415 mm Veleno apsukos: 30 – 2066 aps./min FIDIA valdymas Automatinis įrankių keitimo mechanizmas LOVO apšvietimas Aušinimo sistema

Gamybos metai: 1974, būklė: beveik kaip naujas (naudotas), As-new Deckel FP1 tool milling machine, overhauled by FPS, equipped with 3-axis Heidenhain digital readout, adjustable swivel table, and SK 40 spindle taper. Includes spindle brake and accessories: steady rest and various collets. The machine is in very good, ready-to-operate condition. Can be demonstrated under power by appointment. Dcedpfx Aajq A Icqshsd

Būklė: naudotas, Universalinė frezavimo staklė WEMAS - MAKOSON, modelis WM 2 Dsdpfox Hkd Tsx Aahocd Pagaminimo metai: 1992 Eigos ilgiai X: 480 mm, Y: 350 mm, Z: 250 mm Stalo dydis: 800 x 400 mm Įrankio tvirtinimas: ISO 40 Vertikalus variklio poslinkis: 80 mm Veleno apsukos: 35–4000 min⁻¹, 3 pavarų pakopos Pastūma X, Y ir Z: 1–850 mm/min, be pakopų Greitas judėjimas X, Y ir Z: 1 m/min. Veleno pavaros galia: apie 3 kW Tinklo prijungimas: 400 V, 50 Hz - Pasukamas valdymo pultas su HEIDENHAIN skaitmenine indikacija, modelis Positip 850 - Veleno greitis: 3 mechaninės pakopos ir bepakopis reguliavimas per dažnio keitiklį - Konvenciniai rankiniai ratukai X, Y, Z ašims - Vertikaliosios galvutės pasukimas su gręžimo įvorė: +/- 90° - Įrankio įtvirtinimas rankiniu būdu, M16 sriegis - Centrinis tepimas rankiniu būdu - Aušinimo sistema integruota mašinos pagrinde - Valdymo spinta pritvirtinta prie staklių - Fiksuotas kampinis stalas Reikalinga vieta (I x P x A): 1900 x 1700 x 1820 mm Svoris apie 2000 kg Gera būklė

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Apsisukimų skaičius be pakopų 150–2000 aps./min, tvirtinimas ISO 30, pastūma X kryptimi be pakopų 15–250 mm/min. Eiga: X = 280 mm, Y = 170 mm, Z = 250 mm. • Universalus pasukamas ir pakreipiamas stalas. Dcodpfsx S U Tcex Aahed

Būklė: naudotas, SZIM MSN-500 Tradicinė įrankių frezavimo staklė. Judėjimas X ašimi: 700 mm Judėjimas Y ašimi: 450 mm Judėjimas Z ašimi: 500 mm Sukimosi greitis: 25–3150 aps./min Dcsdpfsv Sk Iqox Aahjd Energijos poreikis: 15 kVA Staklių matmenys: 3100 x 2900 x 2100 mm Staklių svoris: apie 3000 kg Gera techninė būklė. Peržiūrėkite ir kitus mūsų pasiūlymus.

Gamybos metai: 1975, būklė: geras (naudotas), Deckel FP3L with adjustable swiveling table, vertical milling head, SK 40 spindle taper, spindle mount S20x2. In good, operational condition. Can be demonstrated under power by appointment. Dcjdpfx Ajildwxoahsd

Būklė: naudotas, Gamybos metai: 2000, mašinos/transporto priemonės numeris: 5184, Danobat Danocenter NA-750 CNC tekinimo ir frezavimo centras Dodpfxexx Admo Aahjcd maks. tekinimo skersmuo 700 mm, X/Y 255/520 mm, 12 pozicijų viršutinė įrankių galva ir 8 pozicijų apatinė įrankių galva su varomais įrankiais, matavimo galvutė, uodega, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, svoris 15 t.

Būklė: naudotas, Weight approx.: 450 kg Dimensions (LxWxH): 1250x1350x1550 mm Y-travel: 300 mm Z-travel: 200 mm X-travel: 350 mm Speed range: 80–2200 rpm Table size: 600x200 mm Dcodpsrgvbpsfx Aahsd Description: -) Coolant system -) Machine lamp -) Including machine vice Speeds: 80–2200 (8 steps) rpm Spindle taper: DIN 2078 ISO 30 (draw bolt M12) Working area: 300 x 200 x 350 mm Table: 600 x 200 mm Rapid traverse X, Y axis: 1200 mm/min Ram stroke: 45 mm Max. feed force: 1600 Nm Spindle motor: 1.1/1.4 kW Vertical table: 600 x 200 mm Distance vertical milling spindle – milling table: 20 – 370 mm Distance horizontal milling spindle – milling table: 84 – 434 mm Feed in X-axis (stepless): 20 – 200 mm/min Length: 1250 mm Width: 1350 mm Height: 1550 mm Weight: 450 kg

Būklė: nepatikrintas (naudotas), Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 370791, padavimo ilgis X ašis: 800 mm, padavimo eiga Y ašimi: 400 mm, padavimo ilgis Z ašis: 400 mm, veleno greitis (maks.): 4 500 aps./min, stalo plotis: 420 mm, stalo ilgis: 800 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the specified period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Feed rate X-axis: 2,000 mm/min Feed rate Y-axis: 2,000 mm/min Feed rate Z-axis: 2,000 mm/min Rapid traverse X-axis: 5,000 mm/min Rapid traverse Y-axis: 5,000 mm/min Rapid traverse Z-axis: 4,000 mm/min Spindle Spindle speed: 1 - 4,500 rpm Tool holder: 40 mm Speed range 1: 1 - 1,125 rpm Speed range 2: 1,125 - 4,500 rpm Table Table width: 420 mm Table length: 800 mm MACHINE DETAILS Overall height: 2,000 mm Overall width: 1,750 mm Overall length: 1,750 mm Total weight: 1,800 kg Machine weight: 2,025 kg Input frequency: 50 Hz Operating voltage: 400 V Dcodjwvi T Espfx Aahjd Power consumption: 13 kVA EQUIPMENT - The machine vise visible on the table surface is not included in the scope of delivery.

Būklė: geras (naudotas), Gamybos metai: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 spindle taper, S20x2 spindle mount. Good, fully operational condition. Can be demonstrated under power by prior arrangement. Dcedpfxeuclbzo Aahjd

Būklė: geras (naudotas), Gamybos metai: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good working condition, can be demonstrated under power by arrangement. Dcedjtp Nyfepfx Aahsd

Gamybos metai: 1987, būklė: geras (naudotas), Mikron WF2SA tool milling machine with 3-axis Heidenhain Aktive digital readout. Fixed angle table, SK 40 spindle taper. Operational condition. Machine can be demonstrated under power by arrangement. Dcsdpfxjqttt Tj Aahjd

Būklė: geras (naudotas), Gamybos metai: 1991, Stalo tvirtinimo paviršius: 710 x 400 mm Įrankio laikiklis: ISO 40 Važiavimo eigos: X ašis: 400 mm Y ašis: 350 mm Papildomas poslinkis Y ašyje: 420 mm Z ašis: 380 mm Pinolės eigą: 80 mm Apsukų diapazonas: 45 – 2240 aps./min Bežingsnis padavimas: 6,3 – 1250 mm/min Greitoji eiga: 1250 mm/min Variklio galia: 2,2 / 2,8 kW Išmatavimai (I x P x A): 1400 x 1600 x 1850 mm Svoris: 1900 kg Dsdpfx Aeupiypjahecd Priedai / Ypatumai: • 3 ašių skaitmeninis indikatorius HEIDENHAIN • Vertikali ir horizontali frezavimo galvutė • Vertikalus frezavimo galvutė su pinolė ir R + L pasukama • Bežingsnis padavimas • Greitoji eiga visose 3 ašyse • Fiksuotas kampinis stalas • Aušinimo skysčio sistema • Drožlių surinkimo padėklas • Verpstės fiksavimas mygtuku, pvz., keičiant įrankį • Mašinos kojelės • Centrinis tepimas • Valdymo pultas • Avarinio stabdymo jungiklis Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Dear Sir or Madam, We hereby offer a Deckel FP1 3-axis milling machine with retrofitted safety features. This newer-generation machine is equipped, among other things, with centralized lubrication, an electric coolant pump, and a brake motor. Additionally, thanks to Harting connectors, the control cabinet can be disconnected from the machine in no time. The connection of the safety components to the control cabinet is also established using this type of connector, ensuring ease of handling is not compromised. You receive a 12-month warranty on the retrofitted safety features, which we offer for all machine types! *The electronic spindle guard is adjustable across multiple axes and is designed to prevent accidental contact with the working spindle and protect against hazards such as flying chips, coolant, etc.* *The electronic spindle protection cover is intended to prevent contact with the rotating spindle stub and tool clamping mechanism.* Delivery time: on request Year of manufacture: 1989-1992 Machine no.: 2102-xxxx Table: fixed angular table Dedsx Rvlqjpfx Aahjcd Travel: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected power: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5-500 mm/min Rapid traverse: 1200 mm/min Features and accessories: including 3-axis digital readout with Heidenhain active control, coolant system, centralized lubrication, machine feet, technical documents, electronic spindle guard, electronic spindle protection cover Our service promise to you: - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul the machine of your choice - Upon request, you can order additional accessories such as tools directly - Upon request, we can install additional accessories such as safety equipment - We are also happy to take care of shipping and/or installation

Būklė: geras (naudotas), Gamybos metai: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Speed range: 0 - 5000 rpm Dedpjtmtvlsfx Aahjcd Coolant system Universal milling head: swivelling and manually indexable via scale, can be swung away for horizontal machining