Evo pirkti naudotą (2 513)

Sąlyga: naujas, Gamybos metai: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically operated height and tilt adjustment, 0–46° with automatic correction of cutting height during tilting - Control unit at eye level, swiveling - Double roller carriage, carriage length 3,000 mm - Rip fence, manually adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm Kfodpfow I Uxcjx Abkja - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4000 rpm - AKE clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Stepless speed adjustment from 2,000 to 6,000 rpm - Exact adaptation of speed to the material increases cutting quality and saw blade service life Extended cutting height for one-sided tilting: This option is equipped for one-sided tilting with a large extraction hood allowing a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, maximum saw blade diameter is 500 mm, maximum cutting height 179 mm. Only available in combination with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit for single-sided tilting - With electromotive height and lateral adjustment, scoring blade height programmable with rapid lowering and lifting, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofit only possible on machines prepared for scoring unit. LED lighting - Highly energy-efficient LED technology for clearly marking the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precise running. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, keep the upper carriage absolutely precisely aligned with the lower carriage on their respective hard-chromed round guide bars. This quality of movement is maintained even after decades of use and contamination. The carriage construction features a highly torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, positively fitted to the upper carriage, serves as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off switch on double roller carriage - The On/Off switch is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off. This saves steps and increases safety. Angle-mitre fence, crosscuts up to 3500 mm - This ALTENDORF-patented fence with integrated length compensation makes it easy to cut mitres and angles precisely in one function. In both positions, the swing angle is infinitely adjustable by up to 49° and is displayed via a measuring scale. The backlash-free and robust folding stops can be easily shifted and, as single stops, set along the full length up to a maximum of 3,500 mm.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 26017, Gamybos metai: 2018, veikimo valandos: 11 902 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 3 350 mm, kuro tipas: dujos, stiebo tipas: simpleksas, statybinis aukštis: 2 400 mm, Įranga: kabina, šoninis poslinkis, Device details: Year of manufacture: 2018 Load capacity: 2,500 kg Lift height: 3,350 mm Indicated operating hours: 11,902 h Mast type: Standard Mast height: 2,400 mm Length/Width/Height: 2,670 / 1,310 / 2,220 mm Operating weight: 4,480 kg --- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Front work lights * Rear work lights Kfodpfxov Upz Uo Abksa --- Attachments: * Sideshift --- Additional equipment information: Bluespot Flashing beacon --- Operating hours are generally meter readings. We are happy to offer you suitable transport options. An additional 250 - 300 forklifts, attachments, and sweepers are immediately available for you. Of course, also for rent! We are happy to buy your OLD equipment. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors in this offer are expressly reserved. For trade customers, the device is sold as-is, not refurbished. All information is given without guarantee; errors and changes reserved.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 8 725 h, Funkcionalumas: visiškai funkcionalus, Deckel Maho DMU 50 EVO with ITNC 530 About the machine: Only 2,684 spindle hours! Like-new condition! All hoses (pneumatics, coolant, cooling) have been replaced. The machine has been thoroughly cleaned. It has been checked and measured, and a geometry protocol was created. Geometry is excellent. Top features! - Control: Heidenhain ITNC 530 Kodpexf Ud Sjfx Abkjfa - Travel (X, Y, Z axis): 500/420/380 mm - Rapid traverse: 50 m/min - Spindle speed: 20-18,000 rpm - Tool holder: SK40 DIN 69871 - Tool magazine with 32 positions - Machine weight approx. 6,500 kg - Chip conveyor - Through-spindle coolant 40 bar with band filter (new rotary union) - Rinsing gun - Coolant/air blast switching (M25) - Heidenhain TS 640 probe - NEW Renishaw tool probe (automatic swing-out) - Kinematic Qickset - Network connectivity - Automation interface possible Inspection or test under power at our premises is, of course, possible. We would be happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We, Baumgärtner CNC GmbH & Co.KG, are a company specialized in: - Service - Maintenance - Overhaul - Automation of DMG machines and other renowned manufacturers. We guide you! From purchase, through transport and installation, to commissioning and subsequent maintenance or repair work—you can rely on us.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2012, Axes: 5, Travel X/Y/Z: 400mm/400mm/375mm, Spindle speed: 18,000 rpm, Power: 35 kW, Tool holder: HSK-A63, Tool stations: 60, Rapid traverse: 30 m/min, Table dimensions X/Y: 480mm/480mm, Max. workpiece weight: 250 kg, Machine weight: approx. 8,150 kg, Operating hours: approx. 50,950 h, Spindle hours: approx. 20,200 h. The lifting and swiveling unit of the pallet changer is defective. Documentation available. An on-site inspection is possible. Kedpfx Ajwwvw Hjbkofa

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2X392H01125, Gamybos metai: 2017, veikimo valandos: 9 883 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 4 050 mm, laisvas kėlimas: 150 mm, kuro tipas: dujos, stiebo tipas: simpleksas, statybinis aukštis: 2 675 mm, šakių ilgis: 1 200 mm, pavaros tipas: Treibgas, LPG forklift truck Chassis number: H2X392H01125 Load centre: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic Condition: Refurbished with warranty Kodstzg Inopfx Abksfa Technical condition: Very good Front tyres type: Superelastic Front tyres condition: New Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Description: Workshop-inspected, new UVV & service, new paintwork Double pallet clamp, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cabin, CE certificate, safety light, joystick, windscreen wiper, single pedal, LED, seat,

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, mašinos/transporto priemonės numeris: 23500716, From company closure: Pulse welding machine Cebora EVO Speed Star 380 TC Technical specifications: Controller: Sound Digibox MIG P4 Welding range: 10–380 Amps 380 Amps at 40% duty cycle 310 Amps at 100% duty cycle Kfsdpfx Aegh Ii Tebksa 4-roll wire feeder Water cooling TIG welding possible in DC mode Feed rollers: 1.2 mm Torch (4 meters) with 1.0 mm wire, earth cable, and pressure regulator -- Dimensions (approx. in mm): 950 x 850 x 1020 Operating manual included

Sąlyga: naujas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, bendras svoris: 390 kg, Mūsų įmonė įsigijo SMD komponentų montavimo įrangą iš TWS AUTOMATION srl atstovo Vengrijoje – Microdolder Kft. Į sigytą komplektą įeina SR-3200 EVO automatinė trafaretų spausdinimo mašina bei ULD100 panelių išvedimo ir paėmimo tiektuvas, skirtas SR3200 trafaretų spausdintuvui, kurie iki šiol nebuvo naudoti. Papildomai prie trafaretų spausdinimo mašinos pridedame ir TWS100 „Auto-balance“ keturkampį ištempiamą rėmą trafaretinėms plokštėms bei WS-52 trafaretinių plokščių saugojimo spintą. Įranga yra visiškai nauja, nenaudota, nes jos neprireikė gamyboje. Įrankiai, pateikti nuotraukose, sudaro vientisą komplektą ir yra parduodami tik kartu. Parduodami įrenginiai: - SR-3200 EVO automatinė trafaretų spausdinimo mašina, 1 vnt. - ULD100 panelių išvedimo ir paėmimo tiektuvas skirtas SR3200 spausdintuvui, 1 vnt. - TWS100 „Auto-balance“ keturkampis ištempiamas rėmas trafaretinėms plokštėms, 1 vnt. - TWS-52 trafaretinių plokščių saugojimo spinta, talpina iki 80 trafaretų, 1 pilnas komplektas Įranga visiškai nauja ir nebuvo naudojama. Kjdpfx Abovuwfzjkofa Pateikti įrankiai parduodami tik kaip komplektas, kaip matyti nuotraukose.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 26074, Gamybos metai: 2019, veikimo valandos: 13 719 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 5 250 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 965 mm, Įranga: kabina, šoninis poslinkis, .: 26074 Equipment details: Year of manufacture: 2019 Load capacity: 8,000 kg Lift height: 5,250 mm Recorded operating hours: 13,719 h Mast type: Standard Mast height: 3,965 mm Dimensions (L/W/H): 4,139 / 2,500 / 2,770 mm Operating weight: 16,184 kg ---- Features: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights * Twin tyres ----- Attachments: * Sideshift Kedswqda Aopfx Abksfa * Clamping fork ---- Additional equipment information: Beacon Radio ---- Operating hours generally refer to hours read from the meter. We are happy to offer you suitable transport. A further 250–300 forklifts, attachments and sweepers available immediately. Rentals also available! We are happy to purchase your USED machine. Questions? You can reach us during business hours from 7:30 am to 4:00 pm. We look forward to your enquiry! We speak English. Subject to prior sale and errors excepted for this offer. For trade sales, the machine is sold as-is, not refurbished. All information subject to change and errors excepted.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2017, veikimo valandos: 6 759 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 462 000 mm, kuro tipas: dujos, stiebo tipas: triplex, statybinis aukštis: 2 100 mm, pavaros tipas: hidrostatinis, šakių ilgis: 1 200 mm, padang padangų: 85 procentas, didžiausias leistinas svoris: 1 600 kg, kėlimo galia: 1,6 kg/m, kuras: suskystintos naftos dujos (LPG), Įranga: apšvietimas, kabina, padėklų šakės, šoninis poslinkis,

Sąlyga: naudotas, rida: 612 000 km, galia: 338 kW (459,55 AG), pirmoji registracija: 01/2018, kuro tipas: dyzelinas, didžiausias leistinas svoris: 10 754 kg, pavaros tipas: automatinis, emisijos klasė: Euro 6,

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2X392F01684, Gamybos metai: 2015, veikimo valandos: 5 995 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 3 700 mm, laisvas kėlimas: 200 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 2 450 mm, šakių ilgis: 1 200 mm, pavaros tipas: Diesel, Diesel forklift truck Chassis number: H2X392F01684 Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostatic Technical condition: Very good Front tires type: Superelastic Front tires condition: 80 - 100% Ksdpfx Abjtfmgdjkefa Rear tires type: Superelastic Rear tires condition: 80 - 100% Description: Workshop-inspected, new UVV (accident prevention regulations) & service, new paintwork Sideshift, 3rd valve, rear work lights, front work lights, roof cover, front windscreen, CE certificate,

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, aušinimo tipas: oras, Systemair monoblokinis šilumos siurblys šaldymui ir šildymui Šaldymo galia: 8,3 kW, šildymo galia: 8,4 kW, 1 DC twin rotary kompresorius (dažnio valdymas) R32, plokštelinis garintuvas, su 1 integruotu siurbliu 220-240V/50Hz/1 Originalioje pakuotėje, yra kelios vienetai. Kodpfx Absxay R Tsksfa Taip pat galima įsigyti 10 kW, 12,2 kW ir 15,4 kW modelių

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2010, veikimo valandos: 990 h, mašinos/transporto priemonės numeris: 198871007, stiebo tipas: teleskopinis, kėlimo aukštis: 18 000 mm, bendras svoris: 2 700 kg, tuščias svoris: 2 700 kg, transporto ilgis: 5 200 mm, transporto plotis: 1 400 mm, transporto aukštis: 2 000 mm, statybinis aukštis: 2 000 mm, kita apžiūra (TÜV): 01/2025, kuro tipas: hibridas, kuro bako talpa: 9 l, padang padangų: 85 procentas, spalva: balta, didžiausias leistinas svoris: 200 kg, Self-propelled tracked telescopic work platform with 18 m working height and 8.5 m lateral outreach at 200 kg basket load! In very good condition, workshop overhauled, non-marking white tracks. Radio remote control, petrol and electric drive. Hydraulic track width adjustment via remote control. Passage height is under 2 meters despite 18 m working height. Very simple construction, making servicing very straightforward. Honda petrol engine with remote-controlled speed regulation (allows quieter operation). All functions available with the petrol engine also work electrically. Power and air supply in the basket. Electronics/control units on the platform renewed, hydraulic hoses replaced. New ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter installed. Platform paintwork in good condition, no rust. Both the basket and the jib arm (in front of the basket) are rotatable (both functions are rotatable – special equipment!). The platform offers a total of three rotation functions (turret, jib arm, and basket), each can be rotated independently! The tracked platform is available for rental or purchase. New TÜV (inspection) can be arranged. Ksdpevmbzwofx Abksfa Optional: TIMA transport trailer (with new inspection and new brakes) available for an additional €8,000 net. We can also organise worldwide transport for the platform!

Sąlyga: naudotas, Designation: Pipetting robot / Liquid handler Manufacturer: Tecan Model: EVO-2 200 Accessories: - Operating manual - Instrument Software 6.4 - Various cables - Various small parts Ksdpfx Aowp Hiqobksfa - Sample tray Item condition: Used item as shown in the pictures Inspection prior to purchase is possible Please contact us if you have any questions Shipping: The specified shipping costs apply to deliveries within Germany Worldwide shipping available (please inquire for shipping costs outside Germany) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to shipping within Germany Sale to business customers only, without warranty or guarantee. Deviations from technical data as well as errors in the item description may occur and are reserved.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control - Excellent Condition Technical Data: >> Year of manufacture: 2006 >> Manufacturer: Heidenhain, Type: iTNC 530 >> Travels: X500/Y450/Z400 mm >> C axis: 360 degrees >> B axis: 0 degrees to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable up to X, Y, Z 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y-/Z- axis: 50 m/min X- axis: 80 m/min (linear drive) B- axis: 40 rpm C- axis: 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping area: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 meters, Width: 2.4 meters, Height: 2.6 meters Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 KVA Kfedpfx Asvyr Tdebkja >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> IKZ (internal coolant supply) 40 bar >> Coolant filtration unit (fleece filter system) >> Spray gun >> Visiport >> Sealing air for measuring system >> Preparation for robotic loading >> 3D probe: Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following work has been carried out: >> Overhauled main spindle >> Complete maintenance: All coolant and pneumatic hoses replaced, new filters, fluids and belts renewed. Scrapers, etc., and complete cleaning performed. >> Geometric inspection (acceptance protocol) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection protocol has been prepared. Take the opportunity to view and test the machine under power on site.

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 352 NC EVO, Circular saw automaton with semi-automatic operation, designed for cutting aluminium and light metal alloys, suitable for use with carbide-tipped circular saw blades. Kodpsv T U Tgsfx Abkjfa Includes extraction unit and material handling (roller conveyors). Machine capable of mitre cuts from 45° right to 45° left. Thanks to the vertical axis orientation, it is possible to perform saw operations with the head tilted between 0° and 45° to the left.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 17 332 h, keliamoji galia: 7 000 kg, kėlimo aukštis: 4 150 mm, kuro tipas: dujos, stiebo tipas: dupleksas, galia: 72 kW (97,89 AG), No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: max. 7,000 kg Kjdpfswhk D Aox Abkefa Lifting Data Lift height: 4,150 mm Mast type: Duplex Fork length: 2,400 mm Drive & Engine Fuel type: LPG (gas) Power: 72 kW (97.89 hp) MACHINE DETAILS Overall length: 6,100 mm Overall width: 1,940 mm Overall height: 3,230 mm Unladen weight: 12,060 kg EQUIPMENT - Hydraulically adjustable forks - Sideshift - Air conditioning - Heating - Full cab - Windscreen wiper - Front LED work lights - Rear LED work lights - Rotating beacon - Single-pedal control - Dual LPG tank

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 3 740 h, keliamoji galia: 1 500 kg, kėlimo aukštis: 4 100 mm, laisvas kėlimas: 1 343 mm, apkrovos centras: 500 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 1 946 mm, pavaros tipas: hidrostatinis, baterijos talpa: 1 000 Ah, akumuliatoriaus įtampa: 24 V, šakių ilgis: 1 200 mm, Įranga: CE žymėjimas, apšvietimas, kabina, padėklų šakės, pilna techninės priežiūros istorija, šoninis poslinkis, 🚜 For Sale: Linde E15-02 EVO Electric Forklift – 2018 🚜 Looking for a reliable, powerful, and highly maneuverable electric forklift for your business? At 2Bro-Trading B.V. in Mol (Belgium), a well-maintained Linde E15-02 EVO is ready for immediate deployment! 🔧 Key Specifications: Year of manufacture: 2018 Kedpfx Aboxc E A Tskofa Operating hours: 3,740 hours Load capacity: 1,500 kg Lift height: 4,100 mm Mast: Free-lift triplex (free lift height 1,343 mm) Overall height: 1,946 mm Battery: 24v 1,000Ah (2019) with Aquafill system Side shift: Integrated for precise maneuvering Cabin options: 3rd valve, bluespot, LED work & safety lighting, single pedal operation ✅ Benefits: Compact & Agile: Perfect for narrow aisles and precision work. Safe & Visible: Equipped with LEDs, warning beacon, and side-line laser. Comfortable & Efficient: Ergonomic controls with single foot pedal. Reliable: Delivered with full service, new BMWT inspection, and 3-month warranty. 🔋 Charger included – so you can start operating immediately! 📍 View at 2Bro-Trading B.V., Mol (Belgium). 👉 Interested? Contact us today and discover how this Linde can elevate your internal logistics to the next level!

Sąlyga: naujas, MEP SHARK 282 SXI evo [Semi-Automatic] All MEP models available on request! Motor power: 1.5 / 1.8 kW Jaw opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36 / 72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Cutting capacity at 60° left: Description The SHARK 282 SXI EVO is an electro-hydraulic, semi-automatic bandsaw with both semi-automatic dynamic and manual modes, equipped with MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - The vice closes and the motor starts – Saw head descends for cutting – Motor switches off – Saw head returns – Vice opens. Semi-automatic dynamic system (manual lowering of the saw bow to the desired position and cycle start via hand button). Key features: • New centralized control console on a pivoting arm, allowing operator access from any working position • Low-voltage control panel: – Polyester membrane keypad with thermoformed raised buttons and actuation control signal – Display shows: * Diagnostics (messages in user’s language) * Alarms (causes description) * Status of inputs and outputs * Cut counter * Time used for each cut Kfedpjcgbq Iefx Abkoa * Saw blade motor current draw * Saw blade tension * Saw blade speed * Numeric display of saw head position – Manual 24V operation switch, IP55-rated • Complete program for all special cutting cycles • Identification of additional special cutting cycles for unique applications • New generation hydraulic control system: powerful and energy-efficient • Large working surface with turntable on roller bearings, 265 mm diameter with preloaded thrust bearings • Dual blade speeds (36/72 m/min) with control • Prepared for optional electronic inverter for stepless blade speed regulation from 20 to 90 m/min • Saw bow stroke programmable directly from the control panel, allowing adaptation to the workpiece height • Movable clamping device to the left and right, with quick-release vice • Manual blade tensioning control with electronic readout on display • Base frame with pull-out coolant tray • Electric coolant pump for blade cooling and lubrication • Prepared for installation of minimum quantity lubrication system for the saw blade (optional), as well as standard emulsion oil lubricating system • Chip removal brush • Designed for forklift transport • Length stop for repeat cuts • Material support arm with roller for mounting a loading table • Bi-metal saw blade for solid and profile materials • Tool kit and operating instructions in the user’s language For further technical data, please refer to the attached PDF document.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 17 513 h, keliamoji galia: 4 000 kg, kėlimo aukštis: 5 365 mm, apkrovos centras: 500 mm, kuro tipas: dujos, stiebo tipas: triplex, statybinis aukštis: 2 650 mm, variklių gamintojas: VW, Įranga: apšvietimas, kabina, spaustukas, šoninis poslinkis, Triplex mast with full free lift, build height: 2650 mm, lift height: 5365 mm, fork positioner with sideshift, maximum opening: 1750 mm, fork length: 2450 mm, road lighting in accordance with road traffic regulations (STVO), LED work lights front and rear, fully enclosed cabin with heating, air conditioning, VW turbo diesel engine, manual transmission with monopedal, 6x pneumatic tires, operating manual included. Kedpfxowab Nme Abkefa NET PRICE: €18,900 Technical condition at time of sale: Forklift is completely overhauled! Major service newly performed! (Timing belt and water pump also replaced) UVV inspection newly passed without defects! Delivery: In perfect working order! 20 years of professional experience! VIEWING AND TEST DRIVE: By appointment at any time during business hours: Monday to Friday. From 8:00 am to 6:00 pm. Saturday from 8:00 am to 1:00 pm. TRANSPORT: Low-loader or curtain-sided truck available at an affordable rate.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: H2X393V00069, Gamybos metai: 2019, veikimo valandos: 9 507 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 3 110 mm, laisvas kėlimas: 1 550 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 2 170 mm, šakių ilgis: 1 200 mm, tuščias svoris: 4 585 kg, pavaros tipas: Diesel, Dyzelinis krautuvas Važiuoklės numeris: H2X393V00069 Krovimo centras: 500 mm ISO klasė: ISO klasė 2 = 1.000 - 2.500 kg Stiebo tipas: Duplex Būklė: Paruoštas darbui ir visiškai funkcionalus Techninė būklė: gera Priekinės padangos tipas: Superelastik Priekinės padangos būklė: 80 - 100% Galinės padangos tipas: Superelastik Galinės padangos būklė: 80 - 100% Aprašymas: Patikrintas servise su UVV patikra Šoninis stumtuvas, šakių išskėtimo įrenginys, Ksdpfsv E Sy Iox Abkefa Kaup priedas 3-iasis vožtuvas, 4-asis vožtuvas, darbiniai žibintai gale, darbiniai žibintai priekyje, šildymas, STVZO, pilna kabina, CE sertifikatas, valdymo svirtis, švyturėlis, valytuvas, Blue Spot

Sąlyga: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 21 000 h, Funkcionalumas: visiškai funkcionalus, DMG MORI DMU 60 Evo 5-axis simultaneous machining center (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-axis simultaneous Year of manufacture: 2014 Condition: Good, used, new spindle in 2024 Power-on hours: 37,063 h Spindle hours: 21,313 h Control: Heidenhain ITNC 530 Condition: Used, ready for operation Travel (X/Y/Z): 600/500/500 mm Rapid traverse: 80 m/min Spindle speed: 20–14,000 rpm Tool magazine: 30 positions Kjdjwp Ic Espfx Abkofa Tool holder: SK40 NC swiveling rotary table: 600 x 500 mm Internal coolant supply (IKZ): 40 bar with belt filter system Measuring probe: TS649 Documentation

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 10 354 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 4 625 mm, laisvas kėlimas: 1 519 mm, apkrovos centras: 500 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 121 mm, pavaros tipas: hidrostatinis, baterijos talpa: 625 Ah, akumuliatoriaus įtampa: 48 V, šakių ilgis: 1 200 mm, Įranga: CE žymėjimas, apšvietimas, kabina, padėklų šakės, pilna techninės priežiūros istorija, šoninis poslinkis, ⚡ For Sale: Linde E16-02 EVO Electric Forklift – 2018 ⚡ Are you looking for a powerful and efficient electric forklift that is ready for immediate use? At 2Bro-Trading B.V. in Mol (Belgium), an excellently maintained Linde E16-02 EVO is waiting for you! 🔧 Key Specifications: Year of Manufacture: 2018 Operating Hours: 10,354 hours Load Capacity: 1600 kg Lift Height: 4625 mm Mast: Free-lift triplex mast (free lift height 1519 mm) Overall Height: 2121 mm Side Shift: Independent for maximum precision Tyres: 4 solid tyres in excellent condition Battery & Charger: Including matching charger – ready to operate ✅ Extras: Single pedal control 3rd hydraulic valve LED work lights Amber flashing beacon Bluespot & red side lighting for optimal safety Kfodpfx Absxc Ezvjksa 🚀 Advantages: Manoeuvrable & Compact: Ideal for narrow aisles thanks to the Linde combi-steering axle. Comfortable operation: Ergonomic cabin, Linde Load Control, and smooth handling. Powerful performance: Reliable AC motors and precise load control. Low maintenance costs: Durable components and wet disc brakes minimise downtime. 📍 Immediately available at 2Bro-Trading B.V. in Mol, Belgium. 👉 Interested? Contact us today to arrange a viewing!

Sąlyga: naujas, MEP COBRA 352 SX evo [Semi-automatic] Article number: CB352SX Motor power: 1.5/2.2 kW Vice opening: 180 mm Blade dimensions: 350x32x3.4 Weight: 285 kg Speed: 1700/3400 rpm Cutting capacity 0°: 120 / 105 / 180x70 Cutting capacity 45° right: 120 / 100 / 135x60 Cutting capacity 45° left: Cutting capacity 60° right: Cutting capacity 60° left: Description: Semi-automatic circular saw for cutting solid and hollow aluminium materials as well as light metal alloys, equipped with an electro-welded carbide tipped blade. Standard configuration: - Machine suitable for mitre cuts from 45° right to 45° left. - The vertical alignment allows for saw operations with a head inclined from 0° to 45° left. - * MEP features the latest generation of microprocessor controllers developed for semi-automatic machines, with single-axis control. - FEATURES: At the beginning of the cycle: - Vice closes and motor starts – saw head descends for cutting – motor switches off – saw head lifts – vice opens. - New – 16-character x 2 line display to show the following technical parameters: + Number of cuts performed + Cutting time + Ammeter + Displays over 100 diagnostic messages and warnings - New – Display and log of alarm and error messages with the ability to view the incidents occurred. Kfjdschkv Iepfx Abkja Electrical equipment: - New – Low-voltage control panel: Membrane keypad made of polyester with thermoformed, raised pushbuttons and actuation control signal. - Saw bow stroke can be programmed directly from the control panel, adjustable according to the material to be cut. - Ball-bearing mounted rotary table for easy and precise rotation. - Clamping system consisting of two front-mounted vices, freely positionable along the longitudinal axis of the workpiece. - Adjustable mechanical stops for quick positioning of the head at 0° and 45° right/left. - Chip conveyor prepared for OPTIONAL exhaust system. - Automatic blade lubrication system, only activated at the start of cutting. - Machine supplied without saw blade. - Prepared for installation of the optional minimal blade lubrication kit, in addition to the standard coolant-based lubrication with emulsion oil. - Tool kit and operating manual with spare parts list included. For further technical details, please refer to the attached PDF document (catalogue, page 2).

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 13 210 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 4 625 mm, apkrovos centras: 500 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 150 mm, Įranga: šoninis poslinkis, Triplex mast with full free lift, overall height: 2150 mm, lift height: 4625 mm, integrated side shifter, fork length: 1200 mm, front and rear LED work lights, blue warning light, manual mono-pedal control, 48V/625Ah battery from year 2018, 48V/100Ah charger, SE (super-elastic) tires, operating manual included. Technical condition at sale: Forklift has been technically refurbished! Major maintenance newly carried out! Kfjdpou A Di Hjfx Abkja UVV safety inspection passed without defects! Forklift newly repainted! Delivery: In perfect condition! 20 years of professional experience! INSPECTION AND TEST DRIVE: By appointment at any time during opening hours: Monday to Friday, 8:00 am - 6:00 pm. Saturday from 8:00 am - 1:00 pm. TRANSPORT: Affordable low-loader or curtain-side truck available.