Elektros Variklio Vakarų D M Arba S 132 4 pirkti naudotą (70 245)

Sąlyga: naudotas, 1 vnt. skiedinio maišyklė, gamintojas M-tec, modelis D 20 II, pagaminimo metai 2022, 400V, serijos numeris 5800220521 Codpfsxvy Taex Admehf

Sąlyga: naujas, tuščias svoris: 4 652 kg, didžiausias leistinas svoris: 39 348 kg, bendras svoris: 44 000 kg, ašių konfigūracija: 3 ašys, bendras ilgis: 24 700 mm, bendras plotis: 12 800 mm, bendras aukštis: 95 250 mm, pakaba: oras, padangos dydis: 385/65 R 22.5, ratų bazė: 7 400 mm, Gamybos metai: 2025, priekinės padangos dydis: 385/65 R 22.5, galinės padangos dydis: 385/65 R 22.5, emisijos klasė: nėra,

Sąlyga: geras (naudotas), ašių konfigūracija: 3 ašys, pirmoji registracija: 07/2017, bendras plotis: 2 470 mm, bendras aukštis: 1 540 mm, pakaba: oras, spalva: mėlyna, Gamybos metai: 2017,

Gamybos metai: 2013, Sąlyga: paruoštas naudoti (naudotas), Parduodama 10 vienetų vienodų suvirinimo aparatų. Apsauga: 32A; suvirinimo sritis: 40-350A; tuščios eigos įtampa: 18-43V; reguliavimo žingsnių: 20; suvirinimo srovė prie 100% ED (40°C): 260A; ilgis: 900mm; plotis: 560mm; aukštis: 950mm; svoris: 120kg. Standartai: EN 60974-1/IEC 60974-1 (tarptautinis lankinio suvirinimo aparatų standartas); apsaugos klasė: IP 23, apsauga nuo purškiamo vandens ir kietųjų kūnų, mažesnių nei 12mm, tinkami naudoti lauke; izoliacijos klasė: H; aušinimo tipas: AF (aušinimas oru su ventiliatoriumi); suvirinimo srovės diapazonas: nuo 40A/16V iki 350A/31,5V; tuščios eigos įtampa (U₀): 18-43V; darbo ciklas prie 350A: 50% ED, 5min suvirinimas, 5min pertrauka; prie 330A: 60% ED, 6min suvirinimas, 4min pertrauka; prie 260A: 100% ED, galima nuolatinė eksploatacija; maitinimo įtampa: 3~400V, 50Hz (trifazis); maksimalus tinklo srovė (I₁ max): 25A; efektyvioji tinklo srovė (I₁ eff): 18A. Įrenginiai geros būklės, galima apžiūra vietoje. Chsdpfx Adoxdc U Aemof

Gamybos metai: 2015, Sąlyga: labai geros būklės (naudotas), Manufacturer: S+S Separation and Sorting Technology GmbH Type: Unicon-D 2000/400/450/100 Year: 2015 Electrical data: - 230 V - 0.7 A - 50 Hertz Cedpfjk Eakvsx Admohf - IP65

Sąlyga: labai geros būklės (naudotas), Multifunktionaler Ofen mit Gas- und Dampferhitzung. 2 m breites Transportband. Hervorragender Zustand, das beste Exemplar dieses Modells, das wir bislang gesehen haben. Direkt aus einer stillgelegten fleischfreien Fabrik. Der Revoband-Ofen verfügt über präzise gesteuerte, vertikale Heißluftzufuhr, die von oben und unten auf das Produkt am Band gerichtet wird. Wir haben den Ofen mit einer einstellbaren Lüftergeschwindigkeitsregelung für jede Zone ausgestattet, um maximale Flexibilität zu ermöglichen. Perfekt geeignet für Hähnchenfilets, -flügel und -keulen, Burger, Nuggets, Fischstäbchen, Bacon, Würstchen, Lasagne und weitere Spezialanwendungen. EIGENSCHAFTEN & VORTEILE: Hochgeschwindigkeitsluft sorgt für eine gleichmäßige Farbgebung und gleichbleibende Garergebnisse. Präzise Steuerung von Temperatur und Produktionszeit garantiert wiederholbare Resultate. Garen mit Dampf und erhöhter Temperatur oder ausschließlich mit Dampf bietet maximale Prozessflexibilität. Indirekte Beheizung verhindert Verbrennungsrückstände im Produktbereich. Cedpfjrd Rqkex Admehf

Sąlyga: naudotas, 1 vnt. skiedinio maišyklė, gamintojas M-tec, modelis D 20 II, pagaminimo metai 2022, 400V, serijos nr. 5800220522, vidinis nr. 4. Chedpfx Adoxvy R Eemsf

Sąlyga: naujas, tuščias svoris: 4 652 kg, didžiausias leistinas svoris: 39 348 kg, bendras svoris: 44 000 kg, ašių konfigūracija: 3 ašys, bendras ilgis: 24 700 mm, bendras plotis: 12 800 mm, bendras aukštis: 95 250 mm, pakaba: oras, padangos dydis: 385/65 R 22.5, ratų bazė: 7 400 mm, Gamybos metai: 2025, priekinės padangos dydis: 385/65 R 22.5, galinės padangos dydis: 385/65 R 22.5, emisijos klasė: nėra,

Sąlyga: naudotas, High-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction unit, fan, pressure blower, vacuum blower -Motor power: 0.45 kW Cjdpfxsd R Smve Admehf -Speed: 2800 rpm -Airflow rate: 140 m³/h -Pressure increase: Pa -Inlet connection: Ø 160 mm -Outlet connection: Ø 80 mm -Quantity: 1x blower available -Price: per unit -Dimensions: 295/400/H460 mm -Weight: 16 kg

Sąlyga: beveik kaip naujas (naudotas), 4,000 m² Schäfer R3000 Mezzanine, 2-Storey Used item, top condition, like new, see photos Manufacturer: SCHÄFER R3000 CAD planning and assembly available Price on request! Partial sale possible Negotiable price: upon request! Stock item, available immediately Transport and assembly possible upon request. Inspection possible anytime by appointment. Further information on request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. Chedpfxjfiqhdj Admof (Subject to alterations and errors in technical data, specifications and prices. Sale subject to prior sale! See our terms and conditions. All prices ex works, excluding VAT.) Purchase / Sale: We are constantly looking for or offering numerous items from various sectors • Sweep-clean factory clearances • Liquidations • Fast - flexible - efficient! We also clear and/or dispose of inventory for insolvency administrators. Send us a few keywords about your requirements, and we will get back to you promptly. To visit our website, please click on our logo!

Gamybos metai: 2015, Sąlyga: labai geros būklės (naudotas), Manufacturer: S+S Separation and Sorting Technology GmbH Model: Unicon-D 2000/400/450/100 Year of manufacture: 2015 Electrical specifications: - 230 V - 0.7 A - 50 Hertz Chedpfxslatz Do Admef - IP65 Dimensions: 2060 x 650 x 1260 mm Belt width: 390 mm Belt length: 2000 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: PL071105402R, M&R džiovintuvas su 122 cm pločio juosta. Džiovintuvas puikios būklės ir veikia elektra. Juosta pakankamai plati, kad šalia vienas kito tilptų dvi tekstilės eilės! Mes jau išardėme džiovintuvą ir paruošėme siuntimui. Todėl išmontavimo išlaidų nėra. Taip pat mes pasirūpinsime pakrovimu į sunkvežimį. Turime vietoje savo ekspedijavimo įmonę. Siuntimo kaina priklauso nuo gavimo vietos. Rekomenduojame tiesioginį pervežimą! Chsdpfsw Stp Iox Admof

Sąlyga: naudotas, 1 vnt. skiedinio maišyklė, gamintojas M-tec, modelis D 20 II, pagaminimo metai 2024, 400V, serijos numeris 5800240504 Chsdexvy N Ispfx Admsf

Sąlyga: naujas, tuščias svoris: 4 652 kg, didžiausias leistinas svoris: 39 348 kg, bendras svoris: 44 000 kg, ašių konfigūracija: 3 ašys, bendras ilgis: 24 700 mm, bendras plotis: 12 800 mm, bendras aukštis: 95 250 mm, pakaba: oras, padangos dydis: 385/65 R 22.5, ratų bazė: 7 400 mm, Gamybos metai: 2025, priekinės padangos dydis: 385/65 R 22.5, galinės padangos dydis: 385/65 R 22.5, emisijos klasė: nėra,

Sąlyga: naudotas, Metal detector for conveyor belt, all-metal detection system, tunnel metal detector, metal detector -Manufacturer: S+S Temafa, all-metal detection system -Metal detector: S+S TFX 4000/440 -Detector opening: Ø 440 x 530 mm -Control unit: Temafa MSG 4-FF -Individual components: see photos Cedorz Syyopfx Admshf -Transport dimensions: 750/530/H790 mm -Weight: 96 kg

Sąlyga: beveik kaip naujas (naudotas), 4,000 m² Nedcon Mezzanine Warehouse Platform Column grid: 800 cm x 600 cm! Used equipment, excellent condition, like new, see pictures Platform top edge height: 370 cm Load capacity: 500 kg/m² Floor covering available in various designs. Goods lifts, stairs, railings, and accessories available in sufficient quantity. CAD planning and installation possible Partial sale possible Price: on request! Goods in stock. Transport and installation available on request. Inspection possible by appointment at any time. Further information available on request. Always over 5,000 linear meters of pallet racking from various manufacturers in stock. (Specifications, technical data, and prices subject to change and prior sale! See our terms and conditions, all prices excl. VAT ex works) Purchase / Sale We are constantly looking for and offering various items from diverse sectors • Broom-clean factory clearance • Plant closures Chjdpjhzxagsfx Admjf • Fast – flexible – efficient! • We also clear out and/or dispose of inventory for insolvency administrators. Send us a brief message and we will get back to you immediately. To visit our website, please click on our logo!

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time Chjdpod Tqaljfx Admjf - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: EAN0729389556525, lentynos aukštis: 3 500 mm, lentyna ilgis: 8 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, rėmo plotis: 1 100 mm, lentynų eilučių skaičius: 1, Three-bay pallet racking (M35112711-3) 8.5 m long, 3.5 m high, 1.1 m deep, 3 bays, 2.7 m wide each, 2 beam levels per bay, compartment load capacity 3,000 kg. - 4 frames (RM3511 - RAL5019) - 8 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 12 single beams (T2711 - RAL2008) - 1 load capacity sign (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - Maximum 20 working days after receipt of payment - Delivered free to construction site / installation location - Unloading from the truck is to be carried out by the customer using their own lifting equipment - Deliveries are made throughout the territory of the Federal Republic of Germany; except islands! Chedpfx Adev Urrcomof Deliveries to EU countries by individual arrangement.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Chodsfdkb Topfx Admsf Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Csdpofdkb Ujfx Admehf Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) Chodpfx Ajfdkbhedmef - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Chedpfx Adsd Tbbdomef Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts reorder and extension possible at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load identification plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racking is produced exclusively in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed to ensure easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The surface must be concrete, level, suitable for dowels, and able to support the applied loads. The ground condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. Rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, rack uprights should have at least 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) Codpfx Adjguk Dkomjhf - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack Used: Bolt-together System in Hot-dip Galvanized Version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section 1,000 mm - 12 cantilever arms with 1,000 mm effective depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Includes fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Csdpfx Adeguk Dvemjhf Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification prior to delivery. The material is sensibly packed to allow for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, and suitable for doweling, and must be able to absorb the acting loads. Floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the employers’ liability insurance association, it is recommended that the uprights feature a minimum 500 mm overhang above the top storage level.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth Chjdpfxeguk A Hj Admof - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.