Elektrinis variklis 4/6 kW 720/1440 aps./min

Sintec DM1 132MX8/4

Sąlyga: naujas, *TECHNICAL SPECIFICATIONS:* Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (L x W x H): 1,414 x 503 x 1,350 mm (without connections when using constant bypass) Weight: approx. 225–320 kg Heat transfer fluid connection: Flange DN25 PN16–40 (DIN EN 1092-1), Form B1 *EQUIPMENT HIGHLIGHTS:* – Control and regulation unit: smart controller (7'' touch display) – Heating control via solid-state relay – Switch cabinet IP54 – Cooling managed by solenoid valve – Flow measurement based on differential pressure principle – Bypass between supply and return line with reduced cross-section – Level monitoring by magnetic float switch – Flow monitoring by measuring heating element surface temperature and flow rate – Dirt filters in cooling water inlet and in the return flow of the circulation system Ledpog Ey Rfefx Ah Tjhp – Monitoring of supply temperature by electronic safety temperature limiter – External oil filler neck – Dilo fittings on internal pipe connections (except pump connections) – At 350°C: constant bypass including bellows valves – Connection for nitrogen blanketing with pressure gauge and safety valve (0.5 bar at 350°C) (option) Visit our website for more details or for different performance classes. *The unit is compliant with European directives. Other directives and standards are only considered fulfilled if stated in the order confirmation. This technical specification represents the standard equipment; customer requirements deviating from the standard will be shown in quotations and/or order confirmations.*

Sąlyga: naudotas, Gamybos metai: 2014, bakelio talpa: 1 000 l, bendras plotis: 1 000 mm, bendras aukštis: 1 850 mm, tuščias svoris: 128 kg, temperatūra: 130 °C, Stainless steel transport container (stackable) with a capacity of 1,000 litres (food grade). Front-positioned outlet with butterfly valve. Lhedpfx Ahou Ni Ubo Top

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Tešlos dalytuvas ir suapvalinimo mašina Record Automat Bandelėms spausti, dalyti ir suapvalinti tvirta konstrukcija 30 dalių / 25–85 g vienetui su 5 suapvalinimo padėklais jungtis 400V, CEE 16A kištukas matmenys: 690 x 580 x 1650 mm, ploxilgaukxaukšt Naudota mašina Pristatymo paslauga Lodpsrhfqcofx Ah Tshp Daug bandelių presų sandėlyje!

Sąlyga: geras (naudotas), Sunki tekinimo staklės, tekinimo staklės, tekinimo suolas, kreipiančiosios ir traukiančiosios suktuvo tekinimo staklės, kreipiančiosios ir traukiančiosios suktuvo tekinimo suolas -Gamintojas: Meuser, kreipiančiosios ir traukiančiosios suktuvo tekinimo staklės, tipas M-IV-S -Staklių lova: grūdinta -Tekinimo ilgis: 3800 mm -Tekinimo Ø virš lovos: 720 mm -Tekinimo Ø virš atramos: 440 mm Ledpfx Aewrfkfeh Tjhp -Veleno skylė: Ø 95 mm -Veleno sūkių dažnis: 22,4 - 1000 aps./min -Klavišinės strypo griebtuvas: Forkardt Ø 400 mm -Galinis stovas: MK6 -Pavaros galia: 18 kW -Priklauso: 1x luneta, Multifix įrankių laikiklis, įrankiai kaip nuotraukose -Matmenys: 5930/1650/H1600 mm -Svoris: 7500 kg

Sąlyga: geras (naudotas), Code: 0046 Brand: KUPFERMUEHLE - GERMANY Model: DOIN - VUIN 605 2-Schacht-Hobelmaschine + Mehrblatt-Kreissäge für Zimmereien, Holzträger, Dachstühle, Sägewerke, Särge und vielfältige weitere Anwendungen Technische Daten: Schwere Gusskonstruktion Arbeitsbreite: 605 mm Min./max. Arbeitshöhe: 3 / 200 mm Mindest-Werkstücklänge: 350 mm Automatische Gruppenhub-Verstellung mit manueller Nachjustierung möglich Vorschubgeschwindigkeit: 7 - 9 - 11,5 - 14 - 18 - 23 m/min Einlauftisch mit 3 Führungsleisten und motorisierten Obervorschubwalzen Höhenverstellbare Führungs-Sägeeinheit – Motor 2,5 PS – Sägeblatt Ø 180 mm – Absaugstutzen 120 mm Motorisierte Transportwalze im Tisch 1. Welle: Abrichthobel mit 4 Messern – Motor 7,5 PS – Absaugstutzen 120 mm 2. Welle: Dickenhobel mit 4 Messern – Motor 12 PS – Absaugstutzen 160 mm – Motorisierte Transportwalze im Tisch 3. Welle: Mehrblattsäge – Motor 40 PS – Sägeblatt Ø 230 mm – Schnitthöhe 50 mm – Obere Absaugung 160 mm – Untere Absaugung 160 mm 2 obere motorisierte Vorschubwalzen und 1 untere Walze Lhodpfx Ahev D N Efe Top Bedienpult Abmessungen (LxBxH): 3300 x 1650 x 1600 mm Gewicht: 4000 kg

Gamybos metai: 1997, Sąlyga: visiškai atnaujintas (naudotas), 2 units of process design volute casing pumps Lhedsiuznuopfx Ah Tsp 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals renewed. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication on drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: duplex steel Noridur 1.4593 (9.4460) Wear plate: duplex steel Noridur 1.4593 (9.4460) Pressure cover: duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: duplex steel Noridur 1.4593 (9.4460) Bearing bracket: cast iron EN-GJL-250 Shaft sleeve: duplex steel 1.4462 Suction nozzle nominal diameter: DN 80 Discharge nozzle nominal diameter: DN 40 Suction side nominal pressure: PN 10 Discharge side nominal pressure: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with spacer sleeve Baseplate: cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection class: IP55 Power factor (cos phi): 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulphurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine engineering

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, padavimo eiga Y ašimi: 6 000 mm, Tipper tray for logs up to 6 m in length. Available from September 2024. Lhsdpfor Iig Dox Ah Top

Sąlyga: geras (naudotas), Centre height: 205 mm Centre distance: 1500 mm Swing diameter over bed: 410 mm Spindle bore: 47 mm Spindle mount: Size 6 Lhodpfjv Du Ixsx Ah Tjp Tailstock taper: 4 MT Spindle speeds: 28 - 1250 rpm Feeds: longitudinal/cross 0.03-1.3/0.008-0.33 mm/rev Thread pitches: 0.25 - 76 mm Electrical connection: 380 V, 3 kW Required space: 2800 x 1100 x 1600 mm Weight: 1330 kg

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig Ledpfx Ahjrigxyj Tohp - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Sąlyga: naujas, *TECHNICAL SPECIFICATION:* Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water / glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS:* - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: The system automatically warns and then shuts down in case of incorrect water/glycol mixture) - Pressure-controlled cooling water regulator (INFO: Significantly more precise than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free option available) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS:* - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test specimen draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further custom options possible upon request and technical review Visit our website for more details or other performance classes. Lsdpfog Ezarjx Ah Tjhp *This device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific requests differing from the standard are listed in the quotation or order confirmation.*