Ekstruderiu Varžtai pirkti naudotą (783)

Būklė: geras (naudotas), WSM Stationary Screwdriving Unit, Screwdriving Station Assembly of components for car radios and navigation systems, as well as testing of the same. The assembly station is enclosed in a protective housing. The service doors are equipped with monitored safety switches with interlock (locking mechanism). In automatic mode, the doors are locked and can only be opened after an emergency stop or in manual mode by pressing the door button on the control panel. Automatic operation cannot be started if a door is open. Process Sequence Pgsdpfsibichjx Apyjk The station is loaded with the pre-assembled module via the conveyor belt. Below are the automated station work steps for processing a workpiece carrier (WT). Under normal operation, all three stations work in parallel. - Positioning of the WT with the pre-assembled module in station 2.1 - Lowering of the carrier with scanner and vision sensor - Scanning of the three codes (front panel, front PCB, SD PCB), cross-check with the database - Checking the correct locking of the FFC in the connector - Raising the carrier and lowering the WT onto the conveyor - Positioning the WT with the pre-assembled module in station 2.2 - Positioning the screwdriver and fastening the front PCB - Lowering the WT onto the conveyor - Positioning the WT with the pre-assembled module in station 2.3 - Lowering of the light protection hood and contacting, approaching the carrier with test sensors from below - Type-dependent testing of the illumination of SD and CD slots and pushbuttons - Functional test of the CD ejection button - Lowering the WT onto the conveyor > continue If errors occur during testing, they are displayed on the screen and can be remedied if possible. To do this, switch to manual mode and open the doors. After repair and restarting automatic operation, the WT in the station will be retested. If repair is not possible (e.g. screwdriving error), the WT is marked as NIO (Not OK) in the control system and is not processed further. A manual NIO marking and ejection is also possible. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more new and used assembly stations in our shop! International shipping rates available on request!

Gamybos metai: 2011, būklė: geras (naudotas), Extrusion Line Nr. 1 is designed for the production of cast film. Suitable for processing thermoplastics within a temperature range of 150–300°C. POSSIBLE LAYER CONFIGURATIONS: - Monolayer film - 3-layer (A-B+C-A) - 5-layer (A-B-C-B-A) LINE DATA Total extruder output max. 2,230 kg/h Extruder A: 90/33 L/D, max. 330 kg/h Extruder B: 135/33 L/D, max. 950 kg/h Extruder C: 135/33 L/D, max. 950 kg/h Net film width range: 1,600 – 2,110 mm Option for two-roll slit (2 x 800 – 2 x 1,055 mm) Thickness range: 25–580 μm Production speed: 10 – 150 m/min Roll width: 2,500 mm Max. roll weight: 2,000 kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness measuring system for automatic transverse profile measurement with dual-sided corona treatment (max. 12,000 W) Optical inspection system, including marking unit for detected defects, transmitted- and incident-light inspection INFRASTRUCTURE (AUXILIARY EQUIPMENT): Dryers 1–4 with 4,500 L capacity; heating output 48 kW each Dryer 5 with 2,500 L capacity; heating output 20 kW Dryer 6 with 1,500 L capacity; heating output 15 kW Pgedpfx Aepah U Tepysk Each extruder equipped with a gravimetric batch dosing system (3 stations each) Each extruder equipped with melt pump and dual-piston screen changer MAIN COMPONENT SUPPLIERS: SML: Extruders; take-off unit, rollers, winder GWK: Cooling extruder KREYENBORG: Screen changer Cloeren: Feedblock, wide slot die PIOVAN: Dryers, dosing units SERVE: Edge trimming system MATHO: Extraction system RAPID: Edge strip granulator KONGSHILDE: Edge trim handling, start-up rollers INFSTAUB: Filling station SMK: Chillers SIEMENS: Controls OCS: Camera inspection system SEMET: Labelling system AFS: Corona station BETA CONTROLL: Radiometric thickness measurement SML: Automatic flying splice winder, BECKHOFF control system SIMCO: Antistatic equipment ALTEK: Automatic roll handling cart (transfer trolley)

Gamybos metai: 2014, veikimo valandos: 30 000 h, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20526471, Labor-Doppelschneckenextruder – Coperion ZSK 26 Mc18 (40 L/D) mit einem Schneckendurchmesser von 26 mm Er verfügt über alle Merkmale der ZSK Mc18-Baureihe und eignet sich sowohl für die Rezepturentwicklung und Musternahme als auch für die Produktion kleinerer Compoundmengen bis ca. 180 kg/h. Im Vergleich zum Vorgängermodell ZSK 26 Mc ermöglicht der weiterentwickelte Laborextruder Durchsatzsteigerungen von bis zu 100 %, da das Drehmoment auf 15 Nm/cm³ erhöht wurde. Der Extruder ist mobil und benötigt wenig Stellfläche, da der Schaltschrank im Grundgestell integriert ist. Heiz- und Kühlsysteme sind betriebsbereit installiert (Plug & Play). Maschinennummer: 20526471 Baujahr: 2012 Betriebsstunden: ca. 30.000 h Zustand: Gebraucht, in Betrieb Technische Daten: Extrudertyp: Doppelschneckenextruder Modell: ZSK 26 Mc18 Verfahrenslänge: 40 L/D Antriebsleistung: 36,9 kW Stromversorgung: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Zylinderausführung: E-0-0-S-0-0-1-0-V-0 Ausstoß: ca. 150–200 kg/h, abhängig von Rezeptur, Rohstoff und gewünschter Produktqualität Anwendungen: Hochgefüllte Compounds, Masterbatch-Anwendungen Verarbeitung von: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET und Biopolymeren möglich Lieferumfang Podjyhd Dbepfx Apyogk Gravimetrisches Dosiersystem: K-Tron gravimetrische Dosierer 1 × Granulatdosierer 1 × Pulverdosierer (Doppelschnecken-Ausführung) Seiteneinspeisung / Entgasung: 1 × Seitendosierer ZS-B25 1 × Vakuum-Seitenentgasung ZS-EG25 Vakuumsystem: Busch Vakuumpumpe Plastex MI 0120 B 222 CNX6, speziell ausgelegt für PET-Anwendungen. Hinweis: Vakuumpumpe ist nicht im Lieferumfang enthalten. Prozessüberwachung: Schmelzedrucksensor-System Schmelzetemperatursensor-System SPS-Integration Granuliersystem (Stranggranulierung): Lufttrocknungseinheit nicht enthalten Stranggranulator SP50 Wasserbad Peripheriegeräte: Sackentleerstation für Granulate Förderanlage bis zu den Dosierern Ersatzteile: Ersatzteile enthalten, 2. Schneckensatz.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Tucker / Emhart Stud Welding System – DCE1500 + ETF50D + EFM2100 Handheld Stud Welding Gun Manufacturer: Emhart Teknologies / Tucker GmbH System consists of: DCE1500 Control & Power Unit ETF50D Stud Feeder EFM2100 Handheld Stud Welding Gun Made in Germany Description: This complete Tucker / Emhart stud welding system is designed for manual stud installation and is commonly used in: - Body construction - Repair departments - Pre-series production Psdpfx Aex Thg Sspysgk - Manual workstations - Maintenance & rework The combination of automatic stud feeding, a powerful energy supply, and an ergonomic handheld welding gun makes this system ideal for: ✔ Manual point stud welding ✔ Flexible workstations ✔ Applications where robots cannot be used ✔ Rework on body and structural components Technical details (from nameplates): 1️⃣ DCE1500 Control & Power Unit Art. No.: T022 910/400 Power: 400 V – 50/60 Hz Type: DCE1500/5.021.20.05.0400.S Serial No.: 13/3705380250001 - Supplies energy for stud setting - Process monitoring and control - Perfect for manual welding stations 2️⃣ ETF50D Feeder: Art. No.: T044 067/400 Power: 400 V – 50/60 Hz Type: ETF50D.07.69/6.17-36F13.3 Serial No.: 08/2496740200001 - Automatic feeding of studs into the welding gun - Robust, fast, industrial-grade 3️⃣ EFM2100 Handheld Stud Welding Gun: Art. No.: T0580 Type: EFM2100.00.01/5.16F8 Serial No.: 10/2879300500091 - Handheld device, not a robot-guided head - Compact, ergonomic, highly reliable - Ideal for rework, repair, or flexible applications Typical applications: - Manual stud welding - Bodywork service - Repair and rework stations - Pre-series and prototype production - Mobile or small production cells

Gamybos metai: 1994, būklė: naudotas, Svoris: 2,2 t Ekstruzijos galvutė - skersmuo: x mm Pagaminimo metai – apytikslė informacija: x +++++ Atkreipkite dėmesį, kad įrenginys yra išardytas ir paruoštas pakrovimui. Dėl šios priežasties demonstracija su elektros tiekimu arba vaizdo įrašo kūrimas nėra įmanomi. Be to, mūsų skelbime pateiktos pačios informatyviausios ir aukščiausios kokybės nuotraukos. Papildomų nuotraukų atsiuntimas, deja, nėra galimas. Pgodpfxex U A Ias Apysk +++++

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Stanley Tucker Stud Insertion System TE1500 + TF21D + LM310 – Stud Welding & Joining System Manufacturer: Stanley Engineered Fastening / Tucker / Emhart System components: Control Unit / Power Supply: TE1500 (Item No. T028 618/400) Feeding Unit / Feeder: TF21D (Item No. T059 060) Stud Insertion Tool: LM310 (Item No. T133 016) Made in Germany Description: This professional Tucker stud insertion system is a complete industrial joining package for fully automated installation of: - Weld studs - Press-in studs Psdsx Tfypopfx Apyjgk - Fastening elements for car bodies - Structural and sheet metal joints Tucker / Stanley systems are used worldwide in automotive manufacturing because they are: - extremely reliable - highly precise - durable - ideal for integration into robotic cells The system consists of: 1️⃣ TE1500 Control Unit / Power Supply - Supplies the insertion tool - Regulates process parameters - Input: 400 V, 50/60 Hz - Type: TE1500/3.032.55.03.0405.X - Serial No.: 14/4409830349001 2️⃣ TF21D Feeding Unit - Automatic provision & feeding of studs - Mains voltage: 24 V - Type: TF21D.00.00/5.16F8 - Serial No.: 14/4328730020002 3️⃣ LM310 Stud Insertion Tool - Pneumatic/servo-assisted insertion gun - Type: LM310/K.00.00 - For final placement / pressing-in / insertion of studs - Power: "Stud 5.14" (system-specific input value) - Serial No.: 13/3850680080004 Technical Data (from nameplates) Control Unit TE1500 - Mains voltage: 400 V - Frequency: 50/60 Hz - Type: TE1500/3.032.55.03.0405.X Feeding Unit TF21D - Power supply: 24 V - Type: TF21D.00.00/5.16F8 - Automatic feeder for studs / fasteners Insertion Tool LM310 - Type: LM310/K.00.00 - High-precision insertion module for body construction Typical Applications - Automotive industry / OEM production - Robotic cells (KUKA, ABB, FANUC, retrofit systems) - Structural sheet assembly - Joining technology for body components - Series production with high volumes

Gamybos metai: 2013, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20910-01, Unused Hosokawa Bepex BX 150 extruder made of stainless steel (AISI 316) for low-pressure extrusion. This machine produces products with an open structure, large surface area, and excellent formability. The processed material is fed into the device through the inlet opening. In the extrusion chamber, there are two rotors rotating in opposite directions. - The upper 2-arm rotor, equipped with additional wipers, mixes and conveys the material downwards. The rotor is driven via a gearbox by a 0.55 kW, 60 Hz electric motor with adjustable speed from approximately 14 to 139 rpm. - The lower 3-arm rotor features bent arms and rotor blades. Product is compressed and extruded through a screen by the lower 3-arm rotor. The granule diameter depends on the screen perforation diameter. The rotor is driven via a gearbox by a 3.0 kW, 60 Hz electric motor with adjustable speed range of approximately 15 to 144 rpm. The scope of supply includes (2) extrusion screens with perforations of 2 mm diameter x 1.2 mm screen thickness as well as a control cabinet with integrated control panel. Mounted on a stainless steel frame with (4) wheels. Pjdpfxet Tvx Tj Apyjgk

Būklė: naudotas, Naudotas Winkworth modelis ZX500-6 nerūdijančio plieno apgaubtas z formos mentės maišytuvas / ekstruderis. Apytikslė darbinė talpa – 500 litrų, bendra talpa – 778 litrai (priklausomai nuo produkto). 304 nerūdijančio plieno kamera, matmenys: apie 1 090 mm ilgio x 956 mm pločio x 735 mm gylio. Įrenginys turi išlenktą dangtį su užveržimo spaustukais. 304 nerūdijančio plieno išorinis apvalkalas su apšiltinimu. Kiekvieną Z mentę suka 30 kW variklis su reduktoriumi. Nerūdijančio plieno sraigtinis išleidimas varomas 22 kW variklio su reduktoriumi. Komplekte valdymo pultas. Komplekte – 1 vnt. naudotas Tool Temp modelis TT-14500 H ir 1 vnt. naudotas Tool Temp modelis TT-508 X šildymo/aušinimo blokai. Taip pat pridedama 3 vnt. Hydac alyvos aušintuvai ant bendros rėmo konstrukcijos. Įrenginys turi pagrindinį valdymo bloką ir vietines operatoriaus valdymo priemones. Pjdoykn Tfspfx Apyogk

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1988, CARLO SALVI 635 SV Overhauled to CE standards 6.35x70 mm 360 ppm Available with RF System for semi-pierced parts - New Electrical System compliant with CE, including Inverter and PLC - New Lubrication System - New Motor with Disc, Pulley, and Brake - New Drawing Roll Pump Pgedpfx Apsh N Dh Aeyok - New Belts - Grinding of all main unit parts (Slide, Gibs, and Caps) - Replacement of Pins, Bronze Bushings, and Nuts - New Bearings - Shims for gears VISIBLE IN CALOLZIOCORTE (LC) at HBR srl, who will carry out the complete overhaul

Būklė: geras (naudotas), Faceplate Diameter 500 mm 475 rpm Pjdpfxscx N Ats Apyogk

Būklė: naudotas,

Būklė: geras (naudotas), Suvirinimo kaiščiai, keraminiai žiedai, viršūninio uždegimo kaiščiai, galviniai kaiščiai - Suvirinimo kaiščiai: su keraminiais žiedais, 40 skirtingų tipų - Kiekis/atlikimas: žr. nuotraukoje esančią detalių sąrašą Pgsdpfxemxpt Ij Apyek - Parduodama/kaina: tik visas komplektas - Matmenys: 1200/800/H120 mm - Bendras svoris: 64 kg

Būklė: geras (naudotas), CNC pull studs, tool holders, tool clamping systems, milling holders, milling tools - Quantity: 28 pieces - with: groove ring - for: SK50 holders - Thread: M24 - Price: for the complete lot Pgjdpfsd D Iq Nsx Apyjk - Weight: 6.8 kg

Būklė: geras (naudotas), CNC pull studs, tool holders, tool clamping systems, milling holders, milling tools Pgjdpfjb A Rbbex Apyek - Quantity: 43 pieces - Features: with circlip groove - Suitable for: SK50 tool holders - Thread: M20 - Price: for the complete lot - Weight: 13.5 kg

Būklė: naudotas, Gamybos metai: 1998, Darbinis slėgis 8,5 bar Našumas litrais: . l Bendras galios poreikis: 454 kW Keturi vienetai komplekte Pgodpfsx Edwuex Apysk Vulcast Pakrauname mes Gera būklė Pagaminimo metai: 2013 Svoris apie 8 t vienam 3 vnt. zr 450 1 vnt. zh 500 Visi kaip komplektas

Būklė: geras (naudotas), Screws, hexagon head bolts, socket head cap screws, Allen screws - Various sizes - Various grades: 4.6 / 5.6 / 8.8 - Various manufacturers: Fuchs, Würth, Sisma, FS - Euro pallet: 1 Pgodpfx Apeb A R Udjyjk - Weight incl. packaging: 340 kg

Būklė: geras (naudotas), Varžtiniai spaustuvai, vamzdžių spaustuvai, vamzdžių tvirtinimai -DN: 20/22 -DN: 25/28 Psdpfxeb A Sl Ro Apyjgk -DN: 32/34 -DN: 40 -DN: 50/52 -DN: 65/70 -Kaina: komplektas -Pakuotės svoris: 21,5 kg

Būklė: naujas, Įrenginio paskirtis: kukurūzų, ryžių, sorų, sorgų pūtimas, išpūtimas. Galutinį produktą prieš ekstruziją galima pagardinti, paskaninti prieskoniais ar maišyti su kitais miltais. Gali būti gardinama šiais prieskoniais: paprika, druska, pipirai, česnako milteliai, grybai, natūralūs baltymai. Našumas: 12–20 kg/val apdorotos žaliavos. Variklio pavara: 4 kW, 0,18 kW. Bunkeris: maksimaliai 5 kg žaliavos. Su garų ištraukimo sistema. Psdoxvxd Rspfx Apyogk

Būklė: geras (naudotas), Ball screw with nut, Transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded bar Psdpfx Aecp Anpjpysgk -Manufacturer: Rexroth -Type: R150257086 -Type: 69115 40H -Thread diameter: 48 mm -Thread pitch (two-start): 20 mm -Overall length: 1995 mm -Weight: 26 kg

Būklė: geras (naudotas), Approx. 870 SSI Schäfer R3000 shelf panels, shelves approx. 1m x 0.40m – used –: Price per unit: only €8.50 (net), packed and loaded ex location! Minimum purchase: 1 pallet (approx. 180 units) Pgsdpfx Apoki T Akjyek Manufacturer: SSI Schäfer Model: R3000 Year of manufacture: unknown Dimensions: approx. 1m x 0.40m 870 shelf panels Load capacity per shelf: at least 100kg Condition: good Available: immediately Location: Frankenberg / Saxony

Būklė: geras (naudotas), Approx. 24 SSI Schäfer R3000 frames, depth 30 cm – used – : Price per unit: only €30 (net), packed and loaded ex location! Manufacturer: SSI Schäfer Model: R3000 Pgedpfx Apjki Tz Aeyok Year of manufacture: unknown Frame height: approx. 2.28 m Frame depth: 30 cm Condition: good Available: immediately Location: Frankenberg / Saxony

Būklė: geras (naudotas), Krispy Kreme Maschine in ausgezeichnetem Zustand. Versuchen Sie, eine weitere zu finden – vermutlich das einzige verfügbare Exemplar in Europa und in wesentlich besserem Zustand als vergleichbare Modelle in den USA. Pjdpevtg U Ajfx Apysgk

Būklė: geras (naudotas), skirtingos modifikacijos Pgjdsxv S Euopfx Apyek IšxPlxAukšt 112x72x117 cm iš viso 460 vnt. IšxPlxAukšt 112x72x95 cm iš viso 154 vnt. IšxPlxAukšt 150x94x82 cm iš viso 12 vnt. IšxPlxAukšt 102x62x79 cm iš viso 33 vnt.

Gamybos metai: 2025, būklė: naujas, Stock no. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, tightly intermeshing Barrel water / medium cooled/temperature controlled Throughput up to 1200 kg/h (material dependent) Drive: 250 kW – AC 48 L/D R+W safety torque coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens control, Touch HMI Pgjded Hqa Ispfx Apyek OPTIONAL: > Melt filter/screen changer > Pelletizing systems: Strand pelletizer ST-, water ring WRG or underwater pelletizer UWG > Screw configuration tailored to your requirements > Material metering: volumetric or gravimetric > Further accessories available Visit us at our Wuppertal facility. The system is ready for demonstration – test runs with your material can be arranged by appointment.

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2846, Stock no. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, tightly intermeshing Barrel water / medium cooled/temperature controlled Throughput up to 1200 kg/h (material dependent) Drive: 250 kW – AC 48 L/D R+W safety torque coupling Pgodpfx Apei Dtbijyek 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens control, Touch HMI OPTIONAL: > Melt filter/screen changer > Pelletizing systems: Strand pelletizer ST-, water ring WRG or underwater pelletizer UWG > Screw configuration tailored to your requirements > Material metering: volumetric or gravimetric > Further accessories available Visit us at our Wuppertal facility. The system is ready for demonstration – test runs with your material can be arranged by appointment.