Ekstrahavimas Naudojant Briketavimo Presas pirkti naudotą (3 411)

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, veikimo valandos: 1 h, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Nsdpfx Adstnz Hbe Uowp Location: 54634 Bitburg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, briketo skersmuo: 60 mm, Refurbished machine suitable for smaller, single-shift carpentry workshops. Offers a robust construction with reliable performance. Maximum briquette output: 70 kg/h. Year of manufacture: 2003. In very good and well-maintained condition. Original warranty and post-warranty service provided directly by our company. Professional hydraulic briquetting presses PRODECO are suitable for small and medium-sized woodworking facilities. They provide efficient processing of waste into environmentally-friendly, high calorific fuel without the use of binders. Characterized by a compact footprint, low energy consumption, and easy operation. Technical data: - Motor power: 5.5 kW - Briquette production: 35 to 70 kg/h depending on material - Briquette diameter: 60 mm - Briquette step max. 60 mm (so-called endless briquette) - Hopper diameter: 1000 mm - Weight: 650 kg - Machine dimensions: 1170 x 1700 x 1510 mm Features: - Hydraulic unit: 7 pressing cycles / min - Dual pressure gauge for improved pressure control - Level sensor for briquetted material - Oil level sensor Nedpfxjvva Rps Ad Uswp - Inspection window - CE safety standard - Moisture content of processed material must not exceed 18% The machine is refurbished, adjusted, and tested. Price: 8,000 EUR valid only in November; thereafter, the original price of 8,500 EUR will apply.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, briketo skersmuo: 60 mm, Weima briketų presas Nodpjxzpi Uofx Ad Uewp Presas veikia ir skelbime matomas toks, koks buvo paimtas iš staliaus! Presą galima apžiūrėti sujungtą prie elektros!

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1921, Funkcionalumas: visiškai funkcionalus, briketo skersmuo: 90 mm, bendras svoris: 6 000 kg, galia: 55 kW (74,78 AG), paskutinio kapitalinio remonto metai: 2025, Pilna linija su 2 presais puikios būklės! Variklis apie 55 kW, našumas apie 1.400 kg/val., presavimo cilindras apie 90 mm (su arba be skylės!), išankstinis pašildymas iki maždaug 60 °C (uždaras ciklas su šilumos grąžinimu per alyvos baką). Visiškai automatinis kapavimo pjūklas, visiškai automatinis padavimo mechanizmas, įskaitant valdymo spintą. Pakavimo sistema susideda iš: 1 guminių konvejerių juostos (briketų padavimas); po to – susitraukimo tunelio sistema, 400 V, angos ilgis apie 1.600/600 mm, aukštis maks. apie 200 mm, ritininė išleidimo dalis apie 3 m. Priešbunkeris (silo) apie 20 m³ presos užpildymui. Njdpexdrz Eefx Ad Uowp

Sąlyga: naujas, Gamybos metai: 2025, Hydraulic briquetting press with 4 kW main motor. 50 mm briquette diameter. Capacity: 30–50 kg/hour. 1 m³ hopper, oil cooler. Nsdpfx Aef Hmi Eed Uowp

Sąlyga: naudotas, darbinis plotis: 230 mm, Briketavimo presas su malūnu „COMAFER“ modelis COMBI kodas: BRC-027 Nodpfx Aexyw E Ujd Uowp NAUDOTAS ĮRENGINYS – V380/50 – „CE“ Briketo skersmuo: 70 mm Vainiko skersmuo: 900 mm Malūno darbinis plotis: 430 mm Malūno variklio galia: 5,5 kW

Sąlyga: naudotas, Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, bendras plotis: 860 mm, bendras aukštis: 1 800 mm, bendras ilgis: 3 100 mm, briketo skersmuo: 65 mm, bendras svoris: 3 800 kg, Parduodame naudotą briketavimo presą Mütek, kaip matyti nuotraukose. Modelis: MAP 750 Pagaminimo metai: 2013 Briketo skersmuo: 65 mm Pagrindinio variklio galia: 37 kW Padavimo sraigto pavaros variklis: 2,2 kW Suspaudimo sraigto variklis: 5,5 kW Hidraulinės pompos variklis: 0,37 kW Bendra jungiamoji galia: apie 47 kW Siemens SPS S7/300 valdymas su eksploatacijos valandų skaitikliu elektrinėje spintoje Mašina turi CE ženklą Automatinė paleidimo/stabdymo funkcija Matmenys 3100x860x1800 mm (ilgis x plotis x aukštis) Svoris 3800 kg Priedai: - Virš įrenginio esantis žaliavų bunkeris (6 m³) - Presavimo kanalo prailginimas be sklendės (2 m su atrama) - Temperatūros reguliatorius - Briketų ilgio apkarpymo įtaisas - Ciklonas medžiagos įpūtimui, su rėmu - Zasloninis vožtuvas Nedpfjxxyy Eox Ad Uswp Įrenginys vis dar sumontuotas ir paruoštas darbui, todėl galima atlikti funkcijos patikrinimą vietoje. Grynasis kaina: 90.000 €; su PVM: 107.100 €. PVM išrašomas atskirai.

Sąlyga: naudotas, Briketų presas Gross GP 80 Nwodpfx Aoxpgyaod Uop Variklio galia: 7,5 kW, Briketo skersmuo: 60 mm, Talpyklos matmenys: 145 x 145 cm Svoris: 1200 kg Gamybos metai: 2016

Sąlyga: reikia remonto (naudotas), Gamybos metai: 2004, galia: 30 kW (40,79 AG), INCOMPLETE Nedjqd U Smepfx Ad Ujwp NOT TESTED hydraulic power supply: 400V / 50Hz / 70A capacity: 440–500 kg/h fully automatic

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 6 h, *Machine at a special price* Our bestselling briquetting press, the classic. + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Options available at extra cost: *Surcharge for fill level sensor enabling automatic operation: + €995 net *Surcharge for large pre-compaction chamber: + €970 (recommended for very light material such as straw) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *depending on bulk density *based on bulk density of 200 kg per cubic meter Motor output: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 27 liters Hydraulic pre-compactor Cooling option for press clamp: no Hydraulic oil cooling option: yes Nwodpfx Asgl Nlmsd Uep Fill level monitoring option: yes CE compliant Raw material requirements: - The moisture content (atro) must be between at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperate room at a minimum of +5°C - The customer must ensure there is no hydraulic oil loss - Feed material must be free of metals and mineral impurities such as sand, stones etc. Damage to press tooling and/or increased wear may result

Sąlyga: naujas, Gamybos metai: 2025, Mała hydrauliczna prasa brykietująca. Silnik główny o mocy 4 kW, średnica brykietu 50 mm. Wydajność prasy wynosi 30–50 kg/h. Maszyna jest nowa i posiada certyfikat CE. Klient może zamówić ją z chłodnicą oleju. Więcej informacji znajdziesz na naszym kanale YouTube, stronie internetowej lub profilu na Facebooku. Nsdpfefk N Tpox Ad Ujwp

Sąlyga: naujas, Gamybos metai: 2025, Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to a maximum of 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material ideally shorter than 25 mm chip length Nwjdpev Rpxlsfx Ad Uop Moisture content 6–12% (ATRO) Machine suitable for intermittent operation, e.g. up to 2 hours briquetting; 1 hour break, etc. If the machine is to operate continuously for more than 2 hours at a time, an optional cooling unit must be connected.

Sąlyga: naujas, Gamybos metai: 2024, Good, used demonstration machine Availability upon agreement Very robust machine with high pressing force - Also suitable for producing marketable briquette quality *depending on material. The large-dimensioned press cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in use by satisfied customers + Excellent price-performance ratio Surcharge for demonstration cooling unit + €4,980 net (can also be retrofitted later) * cools the pressing jaws (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation longer than 4 consecutive hours. Customs tariff number: 84793010 Briquette diameter: 70 mm Front bushing: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Performance (material dependent): up to 150 kg/h* *dependent on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Njdpfsd Nm Sijx Ad Uewp Length: 2095 mm Width: 1300 mm * with large chamber 1600 mm Height: 1700 mm Weight: 1250 kg Oil capacity: 220 liters Silo diameter: 1200 mm Silo volume: approx. 1 m³ Pump: 75 liters Hydraulic pre-compactor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of the press jaw and hydraulic oil via cooling unit (special accessory) Filling level monitoring option: yes Continuous briquette option: yes (material dependent) Option enlarged filling slide: yes, with enlarged filling slide as special accessory CE compliant Raw material requirements: - Moisture content (atro) must be between 6% and 18% - Chip length max. 20 mm - Installation temperature: temperature-controlled room with at least +5°C - Feeding must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise result

Sąlyga: naujas, Gamybos metai: 2025, * Production time approx. 4–5 months --- Our best-selling briquetting press series + Proven, straightforward technology for extremely low failure rates + 25 years of experience, continuous development, and expertise + Several hundred machines in use by satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series are designed for compacting materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality in continuous operation. The pressing process is performed purely by hydraulic pressure, without the addition of binding agents. Depending on the material, the volume of the feedstock can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. Depending on customer requirements, MPP NEM standalone machines can be configured as complete systems. The chip container for the press can be loaded manually, via conveyor belt, using a dust extractor, or with a tilting skip. For systems intended for fully automatic operation, the use of a lift-and-tilt device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for producing briquettes from homogeneous material. The length of a briquette varies depending on the model from 40 to 75 mm, and the diameter is either 50, 65, or 70 mm, depending on the type. For emulsion recovery, the briquetting press can be equipped with a drip tray to collect and recover coolant, cutting, and lubricating fluids. Non-ferrous metal chips up to approx. 20 mm in length can be loaded into the briquetting press’s storage hopper. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compresses the material and pushes it into the press block. The main press cylinder compresses the material against a vertical slider until the set pressing pressure is reached. Then the vertical cylinder rises, and the stable briquette is ejected. Briquetting offers the following advantages: • Volume reduction of up to 90% Nsdschqxxepfx Ad Ujwp • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable resale -- Briquetting Press NEM 300 Throughput capacity approx. up to 200 kg per hour *highly material-dependent - Last test with aluminum granulate

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Machine available at special price Njdpfx Adefci D Aj Uswp Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, reliable, and established machine Including control cabinet with timer operation The press is switched on manually and runs for the set time on the timer (e.g., 4 hours), then automatically shuts off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square) Briquette length: 5–40 mm *depending on material Throughput capacity up to 25 kg/h *depending on material Machine dimensions (approx.): 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals increase wear --- Optional at extra charge: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + €690 net (delivery time approx. 8 weeks) ---

Sąlyga: naujas, Gamybos metai: 2025, * Options available at extra cost, see below * Production time approx. +/- 5 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminium, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction, ensuring consistent briquette quality during continuous operation. The pressing process takes place without any binding agents, relying solely on hydraulic pressure. Depending on the material, the input volume can be reduced by up to 90%. The standard silo has a volume of approx. 0.5 m³. Larger silos or special containers for installation beneath existing extraction and filter systems as complete disposal units are also available. MPP NEM single machines can be combined into complete systems according to customer requirements. The press’s chip container can be loaded manually, via conveyor belt, with a dust extractor, or by tilting container. For fully automatic systems, the use of a lifting/tipping device in combination with a shredder is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette varies by model, between 40 and 80 mm; the diameter depends on type: 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be fitted with a collecting tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length can be filled into the press’s storage container. A stirrer is installed at the bottom of the container to prevent bridging and feed the material into the precompaction chamber. In this chamber, a hydraulic slide precompacts the material and pushes it into the pressing block. The main ram compresses the material against a vertical slide until the set pressure is reached. Then the vertical cylinder lifts, and the briquette is ejected. The more homogeneous the input material, the more uniform the length of the briquettes produced. Advantages of briquette production: • Reduction of volume by up to 90% • Emulsion recovery • Cost savings in storage and transport • Convenient disposal • Profitable sales Briquetting Press NEM 900: For briquetting aluminium chips Throughput: up to max. 320 kg/h (material-dependent; chip length < 14 mm) *Further details after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation approx. 22 kW Nwsdegfm Ryopfx Ad Usp 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including stirrer Oil tank: 600 litres Dimensions: 2500 x 1700 x 1730 mm (L x W x H) Weight: 2,250 kg Hydraulic precompaction via slide Main pressing cylinder Vertical cylinder Prepared for connection to a cooling unit

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 8 h, Another machine immediately available Very robust machine with high pressing force - also suitable for producing a saleable briquette quality* depending on material. The large-dimensioned press cylinder and 80 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development and expertise + Several thousand machines in use with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit: + €4,995 net (can also be retrofitted later) * cools the pressing jaws and hydraulic oil (recommended if the press is to operate continuously for longer than approx. 3.5 hours without interruption) Briquette diameter: 80 mm Front bushing: 125 mm Max. briquette stroke: 100 mm Optimum briquette stroke: 80 mm Performance (depending on material): up to 200 kg/h* *dependent on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3 phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Nwedoxfwdepfx Ad Uep Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Option for pressing jaw cooling: yes, with special accessory for cooled pressing jaw Option for hydraulic oil cooling: yes Cooling of pressing jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) Option for enlarged feed slide: yes, with special accessory enlarged feed slide CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and at most 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Sąlyga: geras (naudotas), Good, used condition Nwsdpfx Aot Hxudsd Ujp Main motor: 11 kW Throughput up to max. 200 kg/h Year of manufacture: 12/2008 / technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functional guarantee upon handover

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2023, All wear parts new only 704 operating hours Special price for a slightly used demo machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by their robust construction, which ensures consistent briquette quality even in continuous operation. The pressing process takes place without the addition of binding agents, relying solely on hydraulic pressing force. The volume of the input material can be reduced by up to 90%, depending on the material. Nwodpfxjd N Dnhs Ad Uop Throughput rate: up to max. 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 litres Max. briquette length: 50 mm Opt. briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 litres Dimensions: 1750x1130x1100 mm (LxWxH) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Level sensor: yes Requirements for input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room, minimum +5°C - Max. load on agitator: 150 kg - The material feed must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Sąlyga: geras (naudotas), Used, in good condition. Technically inspected pre-owned machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press suitable, for example, for wood dust, spelt husks, enrichment material (e.g. for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optionally, short briquette tablets can be produced Technical data: Throughput capacity up to max. 750 kg/h (material-dependent) (e.g. sawdust with a bulk density of 250 kg/m³) A precise statement regarding throughput performance is only possible after testing your material. Throughput can vary greatly depending on the bulk density of the input material. Commodity code: 84793010 Briquette Ø 65 mm Including 2 m press channel Main drive motor power 37 kW Feed auger with geared motor 2.2 kW Njdpfx Asfmqq Eod Ujwp Compactor auger 5.5 kW Hydraulic pump motor 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for machine status and load display for main drive and feed augers PLC control with operating hours counter in control cabinet Machine carries CE marking Automatic start-stop function Dimensions 3100x860x1800 mm (LxWxH) Weight: 3,800 kg Options at extra cost: Temperature control unit for pressing tools For maintaining an optimal temperature to ensure briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch Ready for connection – required for operation Including corresponding control system + €7,850 net Guillotine or tablet crusher For cutting briquettes to size + €6,900 net Compressed air connection required! Silo for MAP series + €19,940 net - Buffer silo above the machine - Volume approx. 6 m³, sturdy steel structure with agitator discharge and fill-level sensor. Transport piping / cooling section (nominal: 4x2m) Price per 2 meters: €990 net Assembly / commissioning (estimated 2-3 days on site) Billed according to actual time and documented separately. The following rates apply: Service technician/mechatronics engineer per assembly and travel hour: €129.00 Overtime: 25% surcharge Each Saturday and night hour: 50% surcharge Each Sunday and public holiday hour: 100% surcharge Daily allowance per technician: country-specific Per car/transporter kilometer: €0.98/km Travel and accommodation at actual cost or by flat rate charged to the client. Testing with customer-specific material (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for feedstock: - Moisture content (bone dry) must be between at least 6% and max. 15% - Maximum chip length 18 mm - Installation temperature: heated room at least +5°C - The feed must be free from metals and mineral impurities. Damage to the pressing tools and/or increased wear may otherwise result.

Sąlyga: naujas, Gamybos metai: 2025, Machine lead time approx. 3.5 months Very robust machine with high pressing force - Also suitable for producing marketable briquette quality, depending on material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in use by satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted later) * Cools the pressing jaws (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular continuous operation of more than 3.5 hours Large pre-compaction chamber + €1,975 net Recommended for light input materials such as planer chips Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Opt. briquette stroke: 50 mm Performance (material dependent): up to 110 kg/h* During last test approx. 87 kg/h *Dependent on bulk density *Based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Nwodpfx Adoffh Atj Usp Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Cooling option for pressing jaws: yes, with special accessory coolable pressing jaws Pressing jaw cooling via water tank (to be provided by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes String briquette option: yes (material dependent) CE compliant Requirements for raw material: - Moisture content (atro) must be at least 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: heated area at least +5°C - Feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to pressing tools and/or increased wear may result.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, Briketavimo presas skirtas medienai arba medienai panašioms medžiagoms Našumas: apie 80–100 kg/val. Briketo dydis: 60 mm cilindrinis Variklis: 7,5 kW Alyvos šildytuvas 6374 darbo valandos Matmenys: apie 2150 x 1700 x 1400 mm Talpos dydis: 1400 x 1400 x 920 mm Nodpfx Asw Hpizsd Uswp Papildomai: Gali būti komplektuojama su ištraukimo sistema kaip bunkerio priedas. Reikalavimai: Išeitinė medžiaga idealiai turėtų būti trumpesnė nei 25 mm ilgio drožlės Drėgnis: 6–12 % ATRO Mašina tinkama nepertraukiamam veikimui. Pvz., iki 2 valandų briketavimas, 1 valandos pertrauka ir kt. Jeigu reikia, kad mašina dirbtų ilgiau nei 2 valandas be pertraukos, būtina sumontuoti papildomą aušinimą.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 29 h, Another machine available immediately ex works Neckartailfingen *Subject to prior sale *Silo available at an additional charge Press exclusively deliverable with a plant component, such as shredder, granulator, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction system RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette suppliers. Type Classic – throughput up to 425 kg/h *depending on material Options available at extra charge: Plant engineering / mütek Systemtechnik: - mütek MRZ shredder technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary valve - Screw conveyors - Silos - Various control system interconnections - Semi-automatic packaging technology Your advantages: Key point: + Very established, mature die press from 25 years of experience. The challenges and know-how are in the details, e.g. top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Nodpfxjfhql Ts Ad Ujwp Technical data, briquetting press: Throughput: up to 425 kg/h* *depending on the bulk density of your feed material *based on a bulk density of 200 kg per cubic meter Specific information after successful test with your material. If no test material is provided, we cannot guarantee briquette quality and throughput. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compressor Hydraulic main compressor Pressing pressure: up to approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual control of all cylinders Control cabinet "dust protected" with PLC and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - Moisture content (air-dried) must be between min. 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Installation temperature: +8°C ambient - Feed material must be free from metals and mineral contaminants such as sand, stones, etc.; otherwise, damage to the pressing tools and/or increased wear may occur.

Sąlyga: geras (naudotas), Refurbished Used Machine Base machine price from: €147,700 net *Options available at extra cost, see below with full 1-year warranty Delivery approx. 16 weeks after order Technical data: Throughput capacity up to 1200 kg/h (material dependent) (e.g. sawdust with a bulk density of 180 kg/m³) Briquette diameter: 75 mm including 2 m press channel Main motor power: 45 kW Feed screw geared motor: 2 x 2.2 kW Compressor screw: 2 x 5.5 kW Distributor screw: 2.2 kW Hydraulic pump motor: 0.37 kW Total connected load: 65 kW Control panel with plain text display for operational status and load indicator for main drive and feed screws PLC control Siemens S7/300 with operating hours counter in the control cabinet Machine bears CE marking Automatic start/stop function Dimensions: 3100 x 860 x 1800 mm (L x W x H) Weight: 4500 kg Options: Nsdpfe E Dqujx Ad Uewp Silo for MAP series (only suitable for MAP 1200 press) - Storage silo above the machine - Capacity approx. 6 m³, sturdy steel construction with agitator discharge and fill level sensor. €19,700 net plus VAT -Temperature control unit for press tools For maintaining the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, and pressure switch. Fully wired and ready to operate – essential for operation including corresponding control system €7,850 net -Guillotine, for cutting briquettes to length Compressed air connection required onsite €6,940 net plus VAT -Transport duct / cooling section (nominal: 4 x 2 m) per 2 meters: €990 net Assembly / Commissioning (nominal per press approx. 2-3 days onsite) Billed according to actual effort, at the following rates: Service technician/mechatronics engineer per installation & travel hour: €129.00 Overtime: +25% surcharge Each Saturday & night hour: +50% surcharge Each Sunday & public holiday hour: +100% surcharge Travel expenses per technician per day: country-dependent Per car/transporter & km: €0.98/km Travel and accommodation on submission of receipts or flat rate at the client’s expense. Test with customer’s own material: (by arrangement, up to max. 750 kg) – flat rate €1,970 net --- Raw material requirements: - Moisture content (oven-dry basis) must be at least 6% and max. 18% - Maximum chip length 20 mm - Installation temperature: heated room with at least +5°C - Feed must be free from metals and mineral contaminants. Damage to die tools and/or increased wear may otherwise occur.

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Machine available at a special price Another unit available immediately (ex works Neckartailfingen) * Includes 1 year warranty. Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-established, reliable machine with proven performance Nwjdjd Nnwlepfx Ad Uep Includes control cabinet with timer operation The press is switched on manually and runs until the set time on the timer (e.g., 4 hours) has elapsed. It will then switch off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity: up to max. 20 kg/h *depending on material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Silo volume: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood shavings and dust less than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals will increase wear --- Options at extra charge: - Timer function + €490 net Machine is started manually and switches off automatically after a preset period. - Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW! Now also available in 230 Volt Motor with 3 kW instead of 2.2 kW, Additional charge + €890 net (delivery time approx. 8 weeks) - Special pressing unit + €2,950 net