Diskinis Pjuklas pirkti naudotą (4 794)

Sąlyga: paruoštas naudoti (naudotas), REMA RESZEL SKERSINIO PJOVIMO PJŪKLAS, HORIZONTALAUS NUSTATYMAS, PASUKAMAS RANKOVAS AUKŠTYN ŽEMYN SU PRIEŠSVORIU, PJOVIMO PALAIKYMAS SU GALIOS KABELIU, PARUOŠTAS DARBUI, 2,2 kW VARIKLIS. Svarbu: disko skersmuo 350 mm. Stalas su ritinėliu priekyje ir gale. Labai gera būklė, galima pjauti praktiškai 4 kampais. RANKINIS DISKINIS PJŪKLAS DMNE 650/35. - CE sertifikatas - Garantinis ir pogarantinis aptarnavimas - Naujas įrenginys TECHNINIAI PARAMETRAI: - Diskinio pjūklo skersmuo: 350 mm - Didžiausias pjovimo aukštis: 95 mm - Didžiausias pjovimo plotis: 580 mm - Rankovės pasukimo kampas vertikalioje plokštumoje: ±90° - Vežimėlio pasukimo kampas horizontalioje plokštumoje: +90° - Vežimėlio pasukimo kampas vertikalioje plokštumoje: ±90° - Variklio galingumas: 2,2 kW - Veleno sukimosi greitis: 2920 aps./min - Veleno galo diametras: 30 mm - Siurbimo jungties diametras: 80 mm - Sausinimo sistemos oro poreikis: 550 m3/h Ksdpfx Asxx U Azsf Isdg - Staklių svoris: 180 kg

Sąlyga: naudotas, Gamybos metai: 1980, bendras plotis: 700 mm, bendras ilgis: 900 mm, bendras aukštis: 1 700 mm, - Pagaminimo metai: 1980 - Dokumentacija prieinama: Ne - CE sertifikatas: Nėra - Pagrindinio variklio galia [kW]: 2,2 - Didžiausias pjūklo disko skersmuo [mm]: 300 - Įtampa [V]: 380 - Srovės suvartojimas [A]: 5,5 Kjdpfxjx Eydmo Af Ijdg - Galia [kW]: 2,2 - Transportavimo matmenys: 900mm x 700mm x 1700mm (i x p x a) - Transporto paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM/PVM atskaita: PVM atskaitomas įmonėms Pristatymas ir atpirkimas galimi bet kada visiems pramonės įrenginiams

Sąlyga: geras (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, TRENNJAEGER TUS 470 with ball screw and heavy-duty spur gear transmission, designed for burr-free cold sawing of profiles, plates, square, and round material in straight and mitre cuts. The saw head can swivel on both sides from 90 degrees through 45 degrees to 30 degrees, equipped with a digital angle display (Year of manufacture: 2005). - Cutting capacity with saw blade diameter 450 mm: 90° / 45° right/left / 30° right/left. - Round: 140 mm / 140 mm / 130 mm - Square: 110 x 110 mm / 110 x 110 mm / 110 x 110 mm - Rectangle: 290 x 40 mm / 190 x 40 mm / 130 x 40 mm - Rectangular profiles: 290 x 70 mm / 190 x 70 mm / 130 x 70 mm Kdedpfx Aev Ryaaef Iog (Capacity increases by approx. 10 mm with saw blade diameter 470 mm) - Maximum clamping range of the machine: 290 x 150 mm - Working height: 900 mm Machine is supplied without infeed and outfeed conveyors.

Sąlyga: geras (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Naudota šlifavimo linija diskinėms pjūklų geležtėms Modelis: 2 × PRESTIGE (HSS/CERMET šlifavimo staklės) + 1 × LOAD-5 (5 stočių automatinis padavėjas) Būklė: naudota, gera techninė ir vizualinė būklė Pjūklo disko skersmuo: Ø250-630 mm Kdodpfxsxx Ix Ao Af Ieg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1982, Funkcionalumas: visiškai funkcionalus, galia: 5,5 kW (7,48 AG), main motor 5.5 kW blade electrically adjustable up/down blade tiltable up to 45 degrees Kodpfx Afoqwg Dwe Ijdg side carriage with aluminium guide rail table size 100×90 cm maximum blade diameter 400 mm blade speed adjustable via belt: 3000/4000/5500 rpm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1975, max. disc diameter: 400 mm disc adjustable up/down and at an angle spindle diameter: 30 mm disc guard max. cutting height: 135 mm max. cutting width with fence: 700 mm table dimensions: 1020 x 900 mm motor: 4 kW extraction port diameter: 110 mm overall dimensions (L/W/H): 2140 x 1440 x 960 mm weight: 543 kg Kdodoqwdw Nopfx Af Iog

Sąlyga: geras (naudotas), 5kW engine Capability for angled cutting Kodpfjqwdxuex Af Iodg Robust cast iron construction

Sąlyga: geras (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 400 mm, max disk diameter: 400 mm cutting height adjustment angle adjustment: 0°–45° spindle diameter: 30 mm blade guard max cutting width with fence: 1270 mm 2 rotation speeds: 3000 / 4500 rpm table dimensions: 1020 x 1120 mm table extension rear table extension scoring unit max scorer blade diameter: 130 mm scorer spindle diameter: 20 mm Kedeqwduxopfx Af Isdg scorer motor: 0.75 kW main motor: 4 kW overall dimensions (L/W/H): 2930 x 2600 x 1450 mm weight: 711 kg

Sąlyga: geras (naudotas), Gamybos metai: 1990, Funkcionalumas: visiškai funkcionalus, galia: 4 kW (5,44 AG), maximum saw blade diameter: 400 mm blade adjustable up/down and at an angle spindle diameter: 30 mm blade guard maximum cutting height: 135 mm maximum cutting width with fence: 700 mm Kdsdpfjqwdwzex Af Ijg table dimensions: 1020 x 900 mm motor: 4 kW dust extraction port diameter: 110 mm dimensions (L/W/H): 2140 x 1440 x 960 mm weight: 543 kg

Sąlyga: geras (naudotas), KAMPINĖ ŠALTOJO PJŪVIO APVALI PJŪKLAS Tipas: KKS 400 H Pagaminimo metai: 1982 Įranga: Kdjdpfx Afjxnmn Uj Iog - Pašarų riedėjimo takas 1000 mm, kairėje - Išleidimo riedėjimo takas su ilgio ribotuvu, 2000 mm, dešinėje - Pjūklo disko skersmuo: 370 mm - Hidraulinis spaudimo cilindras su 8 mm eiga, rankinis ratas išankstiniam nustatymui - Dokumentacija Būklė: gera, patikrinta dirbtuvėse

Sąlyga: geras (naudotas), Gamybos metai: 1976, Funkcionalumas: visiškai funkcionalus, Šaltaapvalis pjūklas su automatinio padavimo įrenginiu Metai: apie 1976 m. Įranga: - Standartinė komplektacija - Automatinis padavimas, pjūvio ilgis 1700 mm - Įvairūs pjūklų diskai - Aušinimo įranga - Pateikimo ritininis takelis 2400 mm, dalintas (2x1200 mm) - Išvedimo ritininis takelis 500 mm Ksdpfxswtdi Aj Af Iodg - Dokumentacija Būklė: gera, patikrinta dirbtuvėse

Sąlyga: naujas, Gamybos metai: 2024, Underfloor Light Alloy Circular Saw Manufacturer: METALLKRAFT Model: ULMS 420 Item No.: 3627420 Kdodpfx Aotuch Eof Iog Condition: New machine Cutting capacity (square): 120 x 120 mm Speed: 2900 rpm Standard equipment includes: - Saw blade 420 x 30 x 4.0 mm Z 120 - Minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction nozzles for connection to an extraction system - Operating manual

Sąlyga: geras (naudotas), min. szerokość środkowej pryzmy po przecięciu: 80 mm maks. szerokość środkowej pryzmy po przecięciu: 280 mm rozsuw pił: elektryczny średnica wrzecion: 70 mm Kdsdpfxou Evque Af Isg maks. średnica piły tarczowej: 800 mm maks. wysokość cięcia: 260 mm maks. liczba pił tarczowych: 2 szt. długość torowiska podającego: 5000 mm moc silnika: 2 x 15 kW

Gamybos metai: 1982, Sąlyga: naudotas, Circular saw blade sharpening machine Ksdpfx Afscq Nghs Isdg Loroch JLM 36

Sąlyga: beveik kaip naujas (naudotas), Parduodama naudota Felder K700 formatinė diskinė pjovimo staklės su 800 mm pjovimo pločiu. Įrenginys naudotas trumpam demonstracijos tikslams mūsų įmonėje, todėl yra kaip naujas su pilna garantija / atsakomybe. Techniniai duomenys: - Diskinių pjūklų pasvirimo kampas 90-45° - Formatinis stalas 1300 mm - Kampinis liniuotė 1100 mm - Pjovimo plotis 800 mm - 4 kW (5,5 AG) variklis, 400 voltų Kedoxzd Aiopfx Af Ijdg - Įrenginio Nr. 425.04.050.25 Įrenginys yra A-8561 Söding ir gali būti apžiūrėtas bet kuriuo mūsų darbo laiku. Prekė gali būti parduota bet kuriuo metu! Susiję terminai: pjūklas, diskinis pjūklas, formatinė diskinė pjovimo staklės, formatas Nuoroda: R-N1194

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Atnaujinta dvipusė skersinio pjovimo staklės OMS, skirtos greitam ir efektyviam medienos, aliuminio ar kitų medžiagų trumpinimui. Pjovimo plotis reguliuojamas rankiniu ratu su indikacija Hidropneumatinio pjūklo nuleidimo greitis reguliuojamas Abiejų pjūklų automatinis skersavimas valdomas rankiniu pultu 2 x viršutinių automatiškai išvažiuojančių spaustuvų Kiekvieno pjūklo kampas nustatomas atskirai su skalėle CE saugos standartas Praėjimo plotis: 155 mm x aukštis 117 mm (pjovimo aukštį galima šiek tiek padidinti) Kodpfx Afovxtxfo Iodg Disko skersmuo: 350 x 20 mm Pjaustomos medžiagos ilgis: 350 - 3000 mm 2 x 4 kW varikliai Bendras ilgis: apie 3500 mm Svoris: apie 500 kg Įprasta kaina: 89 000 CZK be PVM Gruodžio akcijos kaina su 5% nuolaida: 84 500 CZK be PVM Būtina iš anksto pasitikslinti atnaujinimo būklę ir mašinos paruoštumą atsiėmimui! Sandėlyje Telnice prie Brno 6 mėnesių garantija – garantinis ir pogarantinis aptarnavimas Galimas bandymas, demonstarcija ir operatoriaus apmokymas.

Sąlyga: naudotas, Gamybos metai: 1991, Saw blade diameter 425 mm Cutting diameter 130 / 140 mm Cutting range at 90 degrees: square 120 x 120 mm Cutting range at 90 degrees: flat 260 x 80 mm Cutting speed 11 / 22 m/min Cutting range at 45 degrees: flat 180 x 80 mm Cutting range at 45 degrees: round 130 mm Cutting range at 45 degrees: square 110 x 110 mm Working height 1050 mm Drive power 1.6 / 2.5 kW Machine weight approx. 1160 kg Space requirements approx. 1.25 x 1.2 x 1.9 m Semi-automatic hydraulic miter circular saw with miter adjustment via rotary table (similar to Kaltenbach KKS system), saw blade moves from below, hydraulic material clamping, infinitely variable feed rate, 1 horizontal clamping vice. Semi-automatic operation steps: 1. Clamp material, 2. Sawing, 3. Saw blade return, 4. Unclamp material. Basic design and layout similar to Kaltenbach KKS 400. Fitted with a 400 mm saw blade. Special low-price offer on this machine! Optional at cost price: Infeed roller conveyor 2000 mm and outfeed roller conveyor with stop 1500 mm, roller width 400 mm from a similar machine available for €300. These must be adapted by the buyer (see last picture). Kdedpfx Afevmtdkj Isg This is a used machine, therefore sold without any warranty or guarantee. STOCK-HOLDING DEALER WITH OWN 1600 m² WAREHOUSE.

Sąlyga: naudotas, Saw blade diameter: 350 mm Cutting range round: 350 mm Cutting range rectangular: 350 x 350 mm Kdodpfx Afjv Ncpbo Iog Total power requirement: 2.2 kW Used cold circular saw Kaltenbach SKL 350 Cutting range at 90°: Round: up to 135 mm Square: up to 120 mm Flat: up to 70 x 280 mm Cutting range at 45°: Square: up to 105 mm Flat: up to 55 x 210 mm Saw blade speeds: 2,250 and 4,500 rpm Drive power: 5/6 HP Weight: approx. 650 kg Dimensions (L x W x H): approx. 1,200 x 1,200 x 1,500 mm

Sąlyga: geras (naudotas), Code: 0181 Marke: HARWI - NIEDERLANDE Modell: 130 - CE Norm Kreissäge mit schwenkbarem Sägeblatt zum Schneiden von Massivholz, Plattenwerkstoffen und verschiedenen Materialien – entspricht der CE-Norm. Technische Daten: - Robuste Bauweise - Schwenkbares Sägeblatt 0-45° - Maximale Schnitthöhe: 110 mm - Schnitthöhe bei 45°: 90 mm Ksdpjw Du E Aefx Af Isdg - Sägeblattdurchmesser: 400 mm, Bohrung F30 - Schnittbreite: 680 mm - Motorleistung: 5,5 kW - Obere Schutzabdeckung - Neue Hartmetall-Säge (Vidia) inklusive - Absaugstutzendurchmesser: 120 mm - Gesamtmaße (LxBxH): 1300 x 1350 x 1350 mm - Gewicht: 320 kg

Sąlyga: naudotas, 1 used cold circular saw KALTENBACH KKS 400 Technical data: Saw blade diameter: 400 mm Cutting diameter: 130 mm Cutting range flat: 315x40 mm Kodpfx Aeq Ukvxjf Isdg Cutting range square: 120x120 mm Total power requirement: 1.5 kW Space required approx.: 1200 x 1000 x 1700 mm Machine weight approx.: 1250 kg Manufacturer’s description: The powerful drive ensures high cutting performance, long service life of the saw blades and perfectly clean cut surfaces. All gears are hardened and ground. The entire gearbox runs in an oil bath; all bearing points are equipped with rolling bearings. Different speeds are achieved by change gears, with cutting speeds electrically controlled by pole-changing motors. The proven saw blade guide in a robust swivel bearing system is virtually wear-free. It is rigid and allows operation within narrow tolerances. The hydraulic feed of the saw blade is infinitely adjustable as per scale.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Type VMS 370 Year of Manufacture 2000 Saw Blade Ø max. 370 mm Cutting Range: Tubes approx. 130 mm Flat Material 200 x 100 / 140 x 100 mm Solid Material Square 120 mm Mitre cuts may allow for slightly reduced cutting dimensions Max. up to 140 mm Manual Vertical Saw Slide Stroke approx. 200 mm Saw Blade Speeds 17-34 RPM Saw Blade Drive approx. 2/2.6 kW Total Power Input approx. 3 kW - 380 V – 50 Hz Weight approx. 500 kg Accessories / Special Equipment: • Saw head adjustable for mitre cuts 30 / 45 / 90°, via scale Kdedpfx Asx A H Rrsf Isg • Pole-reversible three-phase motor with max. 2.6 kW drive • Saw slide feed is manual, with long and adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Built-in coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade fitted, plus 2 spare saw blades • Electrical equipment recently renewed Ideal machine for locksmith and metal fabrication workshops. Condition : very good – ready for demonstration – very low noise Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice We look forward to receiving your order. We also have further larger EISELE cold circular saws and other (band/hack/cold circular) saws in stock. Additional sawing machines constantly available – please enquire with us.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Kjdpfxsuiy Nys Af Ijdg Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Year of overhaul: 2024 Max. saw blade size (carbide-tipped): 500/550 mm Saw motor drive power: 6 kW Saw motor speed, 6 steps: 2400–3200 rpm Saw blade cutting speed (500–550 mm): 3,800–5,500 m/min Saw blade feed, infinitely variable: 0–40 mm/s Saw height adjustment, infinitely adjustable, fully electronic Working range, square at 90° max.: 160 x 160 mm Working range, flat at 90° max.: 380 x 60 mm Working range, round at 90° max.: 165 mm Feed length: 10–9999 mm Feed speed (AC servo) max.: 400 mm/s Compressed air connection (on site): 6 bar Weight (saw) approx.: 2,850 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,725 mm x 2,200 mm Footprint LxW: 2,900 mm x 1,725 mm The machine, following completed retrofit, is in as-new technical and visual condition. Thanks to its configuration and design, the machine can be used efficiently across a wide range of applications. The positioning system ensures simple and highly cost-effective operation. Due to the powerful motor, short cycle times can be achieved even when cutting thick-walled profiles or solid materials. The sound enclosure reduces the resulting noise emissions to a minimum. The machine is thoroughly overhauled in our facility according to customer requirements. The following components, among others, have been renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of ball screw - Replacement of servo motor and servo drive - Replacement of the frequency inverter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve islands - Overhauled extraction system - Overhauled minimum quantity lubrication system - Replacement of general wear parts - Overhaul of sound enclosure Kdsdpfx Afsuiy Rqe Iog The machine is also equipped with: - Sound enclosure - Mechanical zero point adjustment Warranty: Unless otherwise agreed, we provide a 6-month warranty on all overhauled or replaced parts for our systems. Labor and wear parts are excluded from the warranty. Options: - Chain magazine for 4/6m materials - Splitter extension (for high-quality cutting surfaces without return marks) - Horizontal clamping of the saw line - Front cut stop in the material feed unit - Reinforced motor 11 kW - Roller conveyors - Delivery and installation at your facility - Training for your employees

Gamybos metai: 2025, Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, • Max. cutting height: 350 mm • Min/max cutting width: 75–250 mm • Min/max round timber diameter: 100–350 mm • Side board thickness: 18–80 mm • Cutting length: 1.8–6 m • Saw blade diameter: 550 mm • 4/6 simultaneous saw cuts • Infinitely variable feed speed: 5–30 m/min • Saw motors: 2x 30 kW and 2x 22 kW • SEW feed gear motor: 3 kW • Automatic 6-position width adjustment • Infeed table with 3-way turning unit • 2 pairs of centering rollers with pneumatic pressure • Powered infeed roller (0.75 kW) with pneumatic pressure • 2 pairs of powered outfeed rollers (each 0.55 kW) • 4 pairs of pneumatic pressure rollers in the outfeed Kdodpfxshkh Nps Af Isg

Sąlyga: paruoštas naudoti (naudotas), 6226 DOUBLE MITRE SAW OMS INVINCIBILE OK 330 Motor power: 1.8 kW Manual feed of saw units Blade diameter: 330 mm Speed: 3000 rpm Maximum distance between units: 3500 mm Mitre angle adjustment: -45/+45 degrees Vertical and horizontal pneumatic clamps Cutting process initiated by dual push buttons Emergency stop switch Kedou Tc Tvepfx Af Iodg Width: 900 mm, height: 1500 mm Year: 2003