Aliuminio diskinis pjūklas

BERG & SCHMID VELOX 350 VA CNC

Būklė: naujas, Gamybos metai: 2026, Cut-Off and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (back side) Cedpfx Aaok H Ic Uehepw Saw blade diameter: 520 mm, saw blade bore: 50 mm Blade speed: 2800 rpm 400 volts / 5 kW (S6/40%) motor with brake and automatic star-delta switch g Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees (swiveled): 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees tilted: 140 mm Saw can swivel to one side to approx. 25 degrees for acute angles and tilt left up to 30 degrees for flat angles TCT circular saw blade 520x4.0/2.8x50 mm 60 teeth WZ neg. for wood RLH-ST60 6.0 meter measuring length, mounting side: left Length stop / roller conveyor, heavy-duty design, Stop slider adjustable from operator position via handwheel, electronic-digital measurement display, stop slider pneumatically clamped, flip-away stop flap to the rear, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230 V mains operation, with electrical on/off switch and socket. Powerful dark red LED display. Higher accuracy compared to battery-powered crystal display RO-ST60 4.0 meter infeed roller conveyor Mounting side: right Heavy-duty design, steel rollers: 60 mm diameter, roller spacing: 200 mm, 400 mm roller width, 3 support feet and connection piece Location: Ex stock 54634 Bitburg - immediately available - Image: similar. Machine is still in its original packaging

Gamybos metai: 2003, būklė: dilaminuotas dirbtuvėje (naudotas), Stock no. 2651 1 used underwater pelletizing system, partially overhauled in 2023 Throughput up to approx. 450 kg/h, depending on material, comprising: Cpedpfsiyyf Isx Aahew Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, 4.4 kW drive By-pass system TVE 1000 ED pellet dryer with 4 kW drive included Agglomerate catcher Temperature-controlled water system with 200 L water tank, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further underwater pelletizing systems available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: complete compounding and pelletizing lines, with single-screw or twin-screw extruders.

Būklė: naudotas, Gamybos metai: 2021, pjūklo disko skersmuo: 800 mm, sukimosi greitis (min.): 1 450 aps./min, galia: 5,5 kW (7,48 AG), Chop Saw AS Very good, well-maintained condition Saw blade diameter: 800 mm. Robust steel tube frame. High-performance saw motors. Pneumatic material clamps (3 pcs., vertical). Two-hand safety operation. Coolant system. Protective cover. Cpsdpfxjd Szf Nj Aahew Optionally with length measuring system or automatic positioning system. Available as a saw-drilling or saw-punching automatic machine on request.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 1 gebrauchte Haeger 412 Einpressmaschine für Blech-Befestigungselemente, Bolzen & Muttern, selbstklemmend, zu verkaufen. Mit Werkzeugen und J-förmigem Unterwerkzeug. Cpedpfx Aaswbhipohjw

Gamybos metai: 1977, būklė: naudotas, Weiler Matador VS2 lathe, year of manufacture approx. 1977, with collets, collet tube, 3-jaw chuck, and Multifix toolpost. Ways show wear in the front section. The machine is in operational condition and can be demonstrated under power by appointment. Codpfxomdn Dxs Aahepw

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1983, Press force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 - 120 mm Installation height: 450 mm (maximum stroke, top position) Ram reinforcement: 100 mm Table size: 850 x 810 mm Pass-through opening: 00 x 0 mm Ram surface: 750 x 810 mm Cjdpogpxc Sjfx Aahspw Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guidance - Hydraulic overload protection - Motorized oil circulation lubrication - Motorized ram adjustment - Manual stroke adjustment - Pneumatic ram weight compensation cylinder - Vibration-damping machine feet

Būklė: naujas, galinis atmušas: 750 mm, - Capacity 1050 x 6 mm - NC electric backgauge - Foot switch - Rear photoelectric safety guard - Support arms - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight 1800 kg Cpedpfx Aogg N Hbsahow - 400V

Būklė: visiškai atnaujintas (naudotas), Edwards GV250 after complete overhaul: - in absolutely as-new condition - inspected according to manufacturer specifications, all clearances and dimensions within tolerances - fitted with new wear parts - available at short notice Cpodefq Rgijpfx Aahsw - includes one-year warranty

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Codpofg Rlcefx Aahepw Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, FLEXIbend RAS 73.30 - Bendimo ilgis: 3200 mm Lakšto storis maks. (400 N/mm²): 3,0 mm Viršutinės sijos eiga maks.: 300 mm Atmušimo sistema (U formos atmušas): 10-1550 mm Pasirinktinai pailginta: (-3050) Staklių matmenys (didžiausia opcija): 4360 x 5220 mm Pagrindinės mašinos svoris: 4400 kg - Su mašina susiję duomenys: Varomas varikliu; 400V, 50/60 Hz, 3 fazės Metai: 2003 Būklė: suremontuota, labai gera naudota būsena Pilnas įrankių komplektas su specifine maks. lakšto storiu Dviejų žmonių naudojimas iš priekio Antras kojinis jungiklis naudojimui iš galo (įskaitant šviesos užtvarą darbui iš galo) Cjdpfx Aox Hx Slsahjpw 15 colių CNC spalvota grafikos ekrano valdymas Touch&More CNC galinis atmušas su palaikymo sistema (10-1550) Atmušimo sistema (standartas): 10-1550 mm - Pavyzdinės nuotraukos -