Disko Flanšo pirkti naudotą (1 109)

Sąlyga: naujas, New electric scrubber dryer, floor cleaning machine KREMER model KR-FL50A Year of manufacture: 2024 Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush: Ø 510 mm Brush speed: 175 rpm Squeegee width: 850 mm Fresh water tank capacity: 50 litres Dirty water tank capacity: 50 litres Noise level: 66 dBA Dujdevvww Tepfx Ab Sjl Climbing ability: 2% Battery voltage: 24 Volt, 100 Ah - Battery charger 24 Volt - Battery 24 Volt, 100 Ah - One cleaning brush - Two separate tanks - No traction drive, the machine is manually pushed Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg Good condition

Sąlyga: geras (naudotas), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: Mounting diameter: Ø 127 mm - Mount: Bore shaft cone Ø 45–58 mm - Type designation: 407x10-100x127 Quantity: 1x mounting flange available - Total dimensions: Ø 180 x 105 mm - Weight: 6.5 kg Duodpfxjwn Dlmj Ab Sjl

Sąlyga: naudotas, Gamybos metai: 2008, Technical details: Drilling capacity in steel (diameter): 100 mm Maximum pitch circle diameter: 7000 mm Number of spindles: 2 Drill spindle speed range: 1 - 3000 rpm Rapid-traverse spindle taper ISO: 50 Drill slide travel: 900 mm Feed rate: 1 - 6000 mm/min Maximum workpiece weight: 18,000 kg Total power requirement: 125 kW Space required approx.: 13 x 11 x 5.1 m Equipped with CNC SIEMENS 840 D Workpiece clamping range up to 7000 mm diameter Dodpsvb Drhjfx Ab Ssul The machine is equipped with 2 drilling spindle supports and ICS (50 bar) allowing simultaneous drilling. Spindle taper SK 50, 2 speed stages: 1 - 600 rpm, 1650 Nm; 1 - 3000 rpm, 300 Nm. Chip conveyor and coolant system

Sąlyga: naudotas, Grinding wheel width max. 104 mm Duodpfx Aju Sbdyjb Ssl Grinding wheel diameter/bore 160 mm Flange taper Suitable for NZA, AZA, RZ301E, etc.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 700 mm, pjūklo pavara: 15 000 W, servo variklio galia: 11 000 W, Pilnai atnaujinta / kaip nauja mašina su nauja elektros instaliacija nauja Siemens S7 valdymo sistema Užbaigimas pagal užsakymą Trumpinimo automatas su kreidos linijos atpažinimu Duodpov Diy Asfx Ab Sol Medienos skerspjūviai 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Pjūklo disko skersmuo 650/700 mm Padavimo greitis 120 m/min Pjūklo variklis 15 kW Servo pavara SEW 11,00 kW keitiklis

Sąlyga: naudotas, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw featuring a pneumatic saw blade feed and a blade diameter of 500 mm. This machine is ideal for precise and efficient cross-cutting of workpieces in workshop environments. Year of manufacture: 2009 Machine number: 3229 — Technical Data • Maximum cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Compliance marking: CE mark • Weight: approx. 420 kg — Condition & Delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on pallet by freight forwarder available at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and errors excepted. Djdoxiza Uopfx Ab Sjul

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 211619.00, šlifavimo disko skersmuo: 275 mm, tvirtinimo skersmuo: 160 mm, 2 nauji, nenaudoti šlifavimo diskų flanšai su aliumininiais tarpdančiais Reishauer dalies Nr. 211619.00 skirti šlifavimo sraigtams Ø275 / 160x160 RZ160 / RZ260 Flanšas šlifavimo įrankiams su 160 mm kiaurymės skersmeniu ir iki 160 mm pločiu 300x160x160 Duodpfxex Eiycj Ab Sjl Visi techniniai duomenys gali būti netikslūs ar su rašybos klaidomis. Kaina pagal užklausimą Parduodama tik ES šalyse.

Sąlyga: geras (naudotas), Flexible disc coupling, jaw coupling, connecting coupling, torsionally elastic coupling -Manufacturer: ERL -Type: GR199 CF-D-160-10 -Flange: 315 mm -Bolt circle: 295 mm, 8x holes Dsdpedfawfofx Ab Seul -Outer diameter: 315 mm -Dimensions: 315/315/H54 mm -Weight: 6 kg

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Manufacturer: HOFMANN Type: NG-1 Duodpfsxzf E Ejx Ab Ssl Machine No.: 922472 Maximum disc diameter: 320 mm Maximum load weight: 20 kg

Sąlyga: geras (naudotas), cutting height 120 mm main motor 11 kW Dedpswm Swnsfx Ab Sjul infinitely variable feed speed double-blade

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Total length 550 mm including 2 hydraulic side pressure guides and 2 adjustment guides for frame posts 70 mm Dujdpfx Aer Ezyxjb Sjl

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, keliamoji galia: 50 kg, bendras aukštis: 2 300 mm, bendras ilgis: 1 500 mm, bendras plotis: 1 500 mm, įvesties srovės tipas: trifazis, sukamosios stalo skersmuo: 700 mm, stalo apkrova: 50 kg, The device is designed for measuring radial and axial runout of rims within specified value ranges. The measuring system consists of left and right carriages, each capable of moving forward and backward within a range of 330 mm, as well as up and down within a range of 170 mm. This allows measurement of the rim at 4 points simultaneously. The unit can operate in both manual and automatic modes. Dsdpfxew Hwxwe Ab Ssul

Sąlyga: beveik kaip naujas (naudotas), Maksimalus šlifavimo disko plotis: 77 mm Šlifavimo disko skersmuo/anga: 400 / 56 mm - Šlifavimo disko laikiklis Klingelnberg (627.020.006) Išorinis skersmuo Ø 260 mm / Vidinis skersmuo Ø 56 mm - Įskaitant Carborundum dilumit šlifavimo diską Išorinis skersmuo Ø 480 mm Dusdpsxgv Afefx Ab Sel žr. techninio brėžinio nuotraukas

Sąlyga: geras (naudotas), Lathe, flange lathe, heavy-duty lathe, lathe, turning machine, flange and sealing surface lathe, slewing ring lathe, flange lathe, mobile lathe, portable lathe -Manufacturer: Matra, lathe for facing flanges and sealing surfaces (slewing ring) -Type: D 57.3 -Turning diameter: 400 - 1600 mm Duedpfxewbdrts Ab Sol -Traverse path: X 180 mm / Z 60 mm -Drive motor: 1.1 kW -Accessories: transport and assembly frame, individual components see photos -Dimensions: 1930/1280/H1000 mm -Weight: 730 kg

Gamybos metai: 2022, Sąlyga: beveik kaip naujas (parodų įrenginys), Log cleaner with disc screen, disc sifter for cleaning and sorting firewood. Firewood cleaner / woodsifter. Duodpfx Abjci U I Ne Ssl

Sąlyga: naudotas, IR50, JenLas® disk IR 50, JENOPTIK disk laser Model: IR50 Type: JenLas® disk IR50 Condition: Used Dodpfora D Drjx Ab Sjul

Sąlyga: labai geros būklės (naudotas), Grinding wheel width max. 15 mm Grinding wheel diameter max. 110 mm Module 0.5 – 10 Duedpfount Eaex Ab Sjl Pressure angle 15 – 25° Speed 2800 rpm Transmission Total power requirement 0.4 kW Machine weight approx. 20 kg Space requirement approx. ... m Dressing device suitable for e.g. Reishauer RZ 400.

Sąlyga: geras (naudotas), Lathe, flange lathe, heavy-duty lathe, lathe, turning machine, flange and mating surface lathe, slewing ring lathe, flange lathe, mobile lathe, portable lathe - Manufacturer: Matra, lathe for facing flanges and mating surfaces (slewing ring) - Model: D 56.4 - Turning diameter: up to approx. 900 mm Dodpfx Abowbd Ibo Seul - Travel: X 110 mm / Z mm - Drive motor: 0.55 kW - Dimensions: 1660/1700/H470 mm - Weight: 224 kg

Sąlyga: geras (naudotas), Šlifavimo diskų laikiklis, standartinės flanšai, specialieji flanšai, šlifavimo disko flanšas - Šlifavimo diskų laikiklis: laikiklio skersmuo: Ø 76 mm - Laikiklis: kūginė skylė Ø 45-58 mm - Kiekis: yra 3 laikiklio flanšai - Kaina: už vienetą Duedpfxown Dkvj Ab Sol - Matmenys: Ø 148 x 55 mm - Svoris: 3,9 kg/vnt.

Sąlyga: geras (naudotas), Grinding wheel mounts, standard flanges, special flanges -Mounting diameter: Ø 35 mm -Grinding wheel bore: Ø 127 mm Duedpfjb A Swfsx Ab Sjl -Maximum grinding wheel width: 35 mm -Price: per piece -Quantity: 4 available -Weight: 5.8 kg/piece

Sąlyga: geras (naudotas), Grinding wheel mounting, standard flanges, special flanges, grinding wheel flange - Grinding wheel mounting: with grinding stone - Mounting: hollow shaft cone Ø 32-35 mm - Grinding wheel: Ø 210 x 40 mm Dujdpfxew Dpfqs Ab Sol - Transport dimensions: Ø 210 x 70 mm - Total weight: 4.3 kg

Sąlyga: geras (naudotas), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: with grinding stone - Mount: bore shaft with taper Ø 62–69 mm / left-hand thread - Grinding wheel: Ø 450 x 40 mm - Transport dimensions: Ø 450 x 140 mm - Total weight: 30 kg Dusdpjw Dn Sisfx Ab Sjl

Sąlyga: geras (naudotas), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: with grinding stone - Mounting diameter: Ø 55 mm, see photos - Grinding stone: 420 x 60 mm, unfortunately without type designation - Transport dimensions: Ø 420 x 87 mm - Total weight: 37 kg Dodpfjw Dn Rxsx Ab Ssul

Sąlyga: geras (naudotas), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange Djdpsw Dnx Nefx Ab Ssul -Grinding wheel holder: with grinding stone -Spindle mount: cone with bore, Ø47-55 mm, thread M60, see photos -Grinding stone: 400 x 40 mm, unfortunately without type designation -Transport dimensions: Ø 400 x 85 mm -Weight: 31.1 kg

Sąlyga: geras (naudotas), Grinding wheel mount, standard flanges, special flanges, grinding wheel flange - Grinding wheel mount: with grinding stone - Mounting: bore shaft, tapered, Ø47-55 mm, thread M60, see photos - Grinding stone: Dorfnerwerk type 5A 120-JOT8-UEH, 400 x 20 mm Djdpfx Aew Dnv Uob Seul - Transport dimensions: Ø 430 x 80 mm - Weight: 26.4 kg