Deco 13 pirkti naudotą (29 118)

Sąlyga: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 2491, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS Hnsdpfx Aew Uc D Hef Ijg 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 180 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 6 Hsdpfxjuhayis Af Ijng - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm BACKWORKING - Number of positions: 6 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 53,892 h ACCESSORIES - Control system: FANUC PNC DECO - Driven tool motorization at: S2, S5 - Driven guide bushing - Parts removal - Parts ejector - Coolant tank

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 Hjdpjuhaz Tofx Af Ieng MAIN SPINDLE - Max. bar diameter: 16 [mm] - Max. machinable length: 160 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] SUB SPINDLE - Max. bar diameter: 16 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 8 - Number of powered positions: 3 - Driven tool speed: 8,000 [rpm] FRONT TOOL POST - Number of positions: 3 SUB MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 1,100 x 7,270 [mm] - Machine height: 1,950 [mm] - Machine weight: 3,000 [kg] MACHINE HOURS - Hours powered: 22,834 [h] ACCESSORIES - Control unit: Fanuc PNS DECO - Driven guide bushing - Parts catcher - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: ROBOBAR SSF

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 180 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 12,000 rpm - Minimum C-axis resolution: 0.1° - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm BACKWORKING STATION - Number of positions: 6 ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 30,161 h EQUIPMENT - Control: FANUC PNC DECO Hsdpsuhaypefx Af Ieng - Driven tool motorization at: S2, S3, S5 - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard Hjdpfx Ajw T Tcwsf Ijng 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1 degrees SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1 degrees TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST Hodpfx Afsuhhp Sj Iong - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUBSPINDLE TOOLING - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kVA MACHINE HOURS - Operating hours: 54,035 h EQUIPMENT - CNC control: Fanuc PNC DECO - Driven tooling motorisation at: S2, S3, S5, S6 - Powered guiding bush - Part extraction unit - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company on the buyer's side. - Number of driven tool holders: 3

Sąlyga: naudotas, CNC long turning automatic lathe TORNOS DECO 13A Hsdpfx Ajuhhp Eef Iong

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machining length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUB MACHINING - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kVA MACHINE HOURS - Operating hours: 42,762 h EQUIPMENT - Control system: Fanuc PNC DECO - Motorisation of driven tools at: S2, S3, S5, S6 - Driven guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: Iemca Genius 118 / 32 LL - Coolant container Hodpjuha D Ujfx Af Iong

Sąlyga: naudotas, TECHNICAL DATA Presetting device for Deco 7 Hnjdpsuhb Sasfx Af Ijg

Sąlyga: naudotas, Gamybos metai: 1999, veikimo valandos: 46 000 h, mašinos/transporto priemonės numeris: IntNr231394, Tornos DECO 2000, pagaminta 1999 m. Valdymo sistema: PNC-DECO Darbo valandos: 46 000 PNC ašių skaičius: 9 Velenų skaičius varomiems įrankiams: 3 Hodpfox Hh Uvsx Af Ieng PAGRINDINIS VELENAS Maks. strypo skersmuo: 10 [mm] Maks. veleno apsisukimų skaičius: 16 000 [aps./min.] C1 ašis: 0,001 [laipsnių] PRIEŠPRIEŠINIS VELENAS Maks. strypo skersmuo: 10 [mm] Maks. veleno apsisukimų skaičius: 12 000 [aps./min.] C4 ašis: 0,001 [laipsnių] Alyvos baseinas Drožlių surinkimo baseinas Detalių nuėmimo įrenginys Detalių išstūmėjas Aušinimo skysčio bakas Platus įrankių laikiklių paketas Strypų padavimo magazinas LNS Tryton SST-5, 3200 su hibridine būgne Mašiną galima apžiūrėti veikiant susitarus dėl susitikimo. Techninių duomenų ir specifikacijų keitimas bei klaidos, taip pat pardavimas anksčiau – galimi!

Gamybos metai: 1968, Sąlyga: naudotas, Bandwidth: max. 500 (650) mm Band thickness: 0.4 - 8 mm Hsdpsbh S Dysfx Af Ijng Coil weight: 13 t Mandrel Ø: 508 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Juostos plotis: 100 - 800 mm Juostos storis plienas (aliuminis): 0,8 - 4 (7) mm Referencinė medžiaga (tempiamasis stipris): 600 N/mm² Ritės svoris: maks. 13 t Ritės išorinis skersmuo: maks. 2 000 mm Pagaminimo metai: 2001 Hodpernq T Nsfx Af Isng

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Juostos plotis: 100 - 800 mm Juostos storis plienas (aliuminis): 0,8 - 4 (7) mm Etaloninė medžiaga (tempimo stipris): 600 N/mm² Ritės svoris: maks. 13 t Hnedpfx Ajrnq Ufsf Iog Išorinis ritės diametras: maks. 2 000 mm Pagaminimo metai: 2001

Sąlyga: labai geros būklės (naudotas), Profesionalus gręžtuvo laikiklis iš garsaus GEWEFA prekės ženklo – vokiška kokybė ir precizika. Skirtas grąžtų ir apdirbimo įrankių tvirtinimui CNC frezavimo staklėse, apdirbimo centruose bei klasikinėse staklėse su SK40 DIN 69871 tvirtinimu. 📌 Techninė specifikacija: • Gamintojas: GEWEFA – pagaminta Vokietijoje • Tipas: SK40 × Ø1–16 mm • Katalogo numeris: 28.05.046.001 / 28.05.046.002 • Kūgis: SK40 DIN 69871 AD/B • Tvirtinimo diapazonas: Ø1 – 13 mm • Pagaminimo metai: 2007 • Būklė: naudotas, labai geras – pilnai veikiantis Hnjdpfxexizbfe Af Ijg ✅ Privalumai: • Preciziškas pagaminimas – aukštas koncentrinis tikslumas ir įrankio stabilumas • Originalus vokiškas produktas – ne kiniška kopija • Puikiai tinka serijinei gamybai ir preciziniam apdirbimui • Paruoštas naudoti iškart. Kaina nurodyta už 1 vnt.

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, The used STOW shelf racking system (Type: Stowshelf) is a high-quality solution for structured storage in workshops, warehouses, or industrial settings. With approximately 13 linear meters in length, 60 cm depth, and 3.0 m height, this warehouse shelving system features robust shelves (each 126.5 × 60 cm, load capacity up to 100 kg) across 7 storage levels. The zinc-plated frames come pre-assembled—ideal for quick and uncomplicated installation. This shelving unit is available directly from stock—perfect for those looking to purchase a robust and sustainable racking system used. Note: Racks must be secured against tipping on-site by the customer. Rack uprights can be cut down to a height of approx. 230 cm. Please note: The shelving system described serves as an example. The STOW shelf racking is modular and can be customized to the required length—tailored to your needs. PRODUCT DETAILS: Height: approx. 300 cm Depth: approx. 60 cm Length: approx. 1300 cm Manufacturer: Stow Type: Stowshelf Shelves: approx. 126.5 × 60 cm, galvanized Load capacity: 100 kg per shelf Uprights: approx. 300 × 60 cm, galvanized, pre-assembled Storage levels: 7 levels Condition: Used STOW SCOPE OF DELIVERY: 11 x uprights (approx. 300 × 60 cm), pre-assembled 70 x shelves (approx. 126.5 × 60 cm) 280 x shelf supports 3 x cross braces Price: €880.00 net €1,047.20 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: Nationwide delivery in Germany by our partner forwarding service—freight charges depend on postal code Professional assembly and disassembly by trained teams available as an option Rack inspections according to DIN EN 15635 by certified inspectors Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department is happy to prepare a non-binding offer—customized to your requirements. Whether new construction, conversion, or expansion—we provide expert advice for your racking configuration. SHOWROOM: Feel free to visit us in our showroom! On site, you can get a comprehensive overview of our pallet racks, warehouse shelves, and other solutions. Many systems are set up and available to experience directly. Our experts are available for your questions and individualized consultation—we look forward to your visit! Not found what you’re looking for yet? Hnedpjx Tfwzofx Af Ijg Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. You will find our phone number on our company page. Our phone service is available Monday to Friday, 08:00–16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Sąlyga: labai geros būklės (naudotas), rida: 1 130 000 km, galia: 460 kW (625,43 AG), pirmoji registracija: 02/2013, Įranga: stovėjimo kondicionierius, Parduodama vilkikas arba sąstatas Volvo FH 13 EEV 2013 m. – 460 AG, rida 1 130 000 km. Įranga: stovėjimo oro kondicionierius, priekinės ir galinės oro pagalvės, gamyklinis ADR, šaldytuvas. Puspriekabė SCHMITZ STANDARD 2013 m.: apžiūrėta, stumdomas stogas, padėklų dėžės, padangos 385/65/22,5, SAF ašys, gera grindis, laikiklis 2 atsarginėms padangoms. Puspriekabė Smitz. Hsdow A Imwspfx Af Iong

Sąlyga: visiškai atnaujintas (naudotas), baterijos talpa: 375 Ah, akumuliatoriaus įtampa: 48 V, bendras aukštis: 650 mm, bendras ilgis: 984 mm, bendras plotis: 415 mm, Tested forklift battery for your forklift - 48V 3PZS 375Ah - Special Tray + 1 year warranty + including Aquamatic + including end discharge cable & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 984 mm Width: 415 mm Height: 650 mm Weight: approx. 580 kg Suitable for the following models and more: Toyota 2FBE10 Toyota 2FBE13 Toyota 5FBE10 Toyota 5FBE13 Toyota 7FBE10 Toyota 7FBE13 Hedpfx Afowzvtvo Iong Toyota 7FBR13 Toyota 7FBRE16N Toyota/BT RR-M 14 Toyota/BT RRE 140 M Toyota/BT RRE 160 M Atlet ET 150 Komatsu FB13M-2 Mitsubishi FB13TCA Mitsubishi FB15TCA Nichiyu FB13 Nichiyu FBT13 Nichiyu FBT13-18 Nichiyu FBT15 Nissan N01L13 Nissan N01L13U Nissan S1N1L13Q Nissan TX13 Nissan TX15 Nuova Detas SE 315 Rocla TMF131 UniCarriers AS1N1TX13 Other common battery sizes available on request. Transport possible.

Sąlyga: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Presavimo plokštė (darbinis plotas) 2500 mm × 1300 mm Maksimalus ruošinio (skydelio) ilgis 2500 mm Maksimalus ruošinio plotis 1300 mm Ruošinio storis (tipinis darbinis diapazonas) min ~12 mm, maks ~50 mm (standartinėje konfigūracijoje) Bendra spaudimo jėga / slėgio pajėgumas iki ~90 tonų (priklausomai nuo komplektacijos) Hnedpfx Ajx Ezpwjf Iog Šildymas / šildymo plokštės: terminių alyvų kaitinamos plokštės; darbinė temperatūra iki ~120 °C (šildomų plokščių versijoje) Energijos tiekimas / įrengtoji galia (kai kuriuose aprašymuose): ankstesni duomenys nurodo ~5,5 kW šaltai presavimo versijai. 6 vertikalūs cilindrai (plokštės spaudimui) kai kuriose pilnos komplektacijos versijose.

Sąlyga: geras (naudotas), Servo motor, electric motor, DC motor, stepper motor, stepping motor Hodpfswwqi Rsx Af Iong - Manufacturer: Isoflux, Servo motor type 544,4,25,96/13 - Speed: max. 2500 rpm - Voltage: 96 V - Shaft: Ø 16 x 50 mm - Pitch circle: Ø 130 x 10 mm - Protection class: F - Dimensions: 500/128/H150 mm - Weight: 16 kg

Sąlyga: naudotas, Techninės detalės: Plokštės ilgis: 2003 mm Plokštės plotis: 1005 mm Plokštės aukštis: 180 mm Transportavimo išmatavimai (Ilgis x Plotis x Aukštis): 2,02 x 1,05 x 0,18 m Galimos 3 plokštės (kaina už vnt.) Plieninis lietinys Stalo paviršiaus dydis: 2020 mm x 995 mm Išilginė griovelė: kiekis 4 Išmatavimai: a=38, h=60, b=59, c=24 mm Vidurio atstumas: 250 mm Hsdewnfu Njpfx Af Ieng Tvirtinimo skylė: kiekis 4 Dydis D=30 mm

Gamybos metai: 2018, Sąlyga: naujas,

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Agilent 1200 Serie G1160A 12/13 Selektionsventil. Die Ventile der Agilent 1200 Serie bieten dem Anwender umfassende Lösungen für mehr Flexibilität bei der Lösungsmittel- sowie Säulenauswahl. Sie ermöglichen neue Automatisierungsmöglichkeiten für die Probenvorbereitung sowie einen höheren Probendurchsatz durch alternierende Säulenregeneration. Die Ventile der Agilent 1200 Serie sind vollständig in die CAN-Umgebung (Controller Area Network) des Agilent 1200 Series LC-Systems integriert und können über die Agilent ChemStation Software gesteuert werden. Medienberührende Teile: Edelstahl und PEEK Anschlussgröße: Passend für 10-32 Außengewinde Strömungskanal-Durchmesser: 1,0 mm (0,040”) Volumen im Strömungskanal: Stator (inkl. Statordichtfläche) 6,4 µl/Bohrung, Rotordichtung 4,0 µl/Nut Maximaler Druck: 21 MPa (207 bar, 3000 psi) Empfohlener Durchflussbereich: 0,2 – 100 ml/min (bei hohem Druck, nach der Pumpe), 0,2 – 10 ml/min (bei niedrigem Druck, vor der Pumpe) 2 Stück verfügbar. Preis: 890 EUR pro Stück. Hsdpfsuavnyjx Af Isng Guter, funktionsfähiger Zustand. Bitte beachten Sie auch unsere weiteren Angebote.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Single-sided edge processing line HOMAG with feed rate up to 32 m/min, precise workpiece positioning with rolling block link chain (instead of standard chain), enhanced mechanization, fully automatic workpiece feeding unit WZ14, with belt sanding unit for solid wood edges. Comprising: - HOMAG format and edge banding machine, Type: PROFI KFL350/13/A3/WZ - Loading station/feeding table HOMAG POWER TBL100/30/30/S Hnjdpfx Aowvlhlof Ieg - Return system/BOOMERANG LIGMATECH, Type: ZHR 30/L/185/F Edge banding with PUR and EVA adhesives.

Sąlyga: naudotas, Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Gamintojas: Orma Macchine (OleoSystem), Italija Modelis: LS-ECO 30/13 Pagaminimo metai: 2002 Hodpfsxwwggox Af Ieng Tipas: Plokščių presas Darbo matmenys: 3000x1300 mm Plokščių storis: min. 12 mm / maks. 50-60 mm Elektra: 308 V, 50 Hz, 3 kW, 7A Įrenginio matmenys: Ilgis 4000 x Plotis 2100 x Aukštis 1900 mm Svoris: 3900 kg

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Exhibition machine (new machine), available immediately - Internal dimensions (WxDxH): 1250 x 4000 x 1450 mm - External dimensions (WxDxH): 1900 x 4900 x 2500 mm - Power consumption: 240 kW - Current consumption: 350 amps - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500 (software packages OPCA & PCC) - Screen recorder: JUMO Logoscreen 601 - Including feedthrough bore and 6 additional slots for recording type K customer thermocouples - Multi-zone design (3 zones) - Switchgear with solid-state relays - Climate control for the switchgear system - Automatic supply and exhaust air dampers - Exhaust air dampers, automatic actuation via control system: Small cooling (2 dampers open) and large cooling (all 6 dampers open) - Regulated cooling system (including frequency inverter, controlled by the control system), with supply air fan - Electrically driven bogie hearth on rails - Max. loading capacity: 3.5 t (reinforcement available on request). Metal loading platform for the bogie hearth on request! - Swing door - Documentation, CE Declaration Reinforcement of the bogie hearth available on request! See image 4 (modification example)! We are happy to offer setup, commissioning and staff training. Please contact us! We supply new and used industrial furnaces. Inspection at our warehouse is possible upon request! Hedpfx Afsp H Tb Ts Iong Bogie hearth furnace, bogie hearth oven, furnaces, annealing furnace, kiln, hardening furnace, heat furnace, industrial oven, tempering furnace, baking oven, drying oven, industrial furnace