CNC šveicariško tipo tekinimo staklės

TORNOS DECO 13A

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm Hnedpew T Tcwofx Af Iog - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Hnjdpfxovivx Ns Af Ieg Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machinable length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1 degrees SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1 degrees TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of positions: 4 Hnedpfx Aouhhp Ssf Ieg - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUBSPINDLE TOOLING - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kVA MACHINE HOURS - Operating hours: 54,035 h EQUIPMENT - CNC control: Fanuc PNC DECO - Driven tooling motorisation at: S2, S3, S5, S6 - Powered guiding bush - Part extraction unit - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified company on the buyer's side. - Number of driven tool holders: 3

Sąlyga: naudotas, CNC long turning automatic lathe TORNOS DECO 13A Hedpfx Asuhhp Eof Ijng

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Hodpfxsvgxfyo Af Isng Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Through-spindle coolant Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is delivered with many tools

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Hnsdpfovnd Sujx Af Ijg

Gamybos metai: 1984, Sąlyga: paruoštas naudoti (naudotas), Rafamet UBB 112/2 Minimální průměr běhounu kola: 700 mm Maximální průměr běhounu kola: 1120 mm Délka upnutí: 540 - 1050 mm Minimální délka nápravy dvojkolí: 1640 mm Maximální délka nápravy dvojkolí: 2800 mm Maximální šířka pneumatiky: 150 mm Maximální hmotnost dvojkolí: 4000 kg Rychlost posuvu saní: 2000 mm/min Maximální posuv saní: 2000 mm/min Hedpfshvml Iox Af Ieng Výkon hlavního pohonu: 80 kW Hmotnost cca: 40 000 kg

Gamybos metai: 1990, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 92041, Table clamping surface: 410 x 900 mm Travel paths x/y/z: 560 / 410 / 380 mm Spindle mount: SK 40 Spindle speeds: 22 – 6,000 rpm Feed rates: x and z up to 10,000, y up to 240 mm/min Hodpfx Afjdhhpro Ijng Space requirement: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg

Sąlyga: naudotas, Gamybos metai: 2005, x-axis travel: 1,000 mm Hodpfxjwf Rgfj Af Ieng y-axis travel: 1,000 mm z-axis travel: 1,000 mm Control: Siemens 840 D Spindle speed range: 20 - 18,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 121 Nm Tool interface: HSK-A63 Tiltable B-axis: -30° / +180° Swivel time: 1.2 s Number of pallets: 2 Pallet size: 1,000 x 800 mm Max. workpiece weight: 1,500 kg Rotatable C-axis: 360° Number of tool stations: 180 positions Tool interface: HSK-A63 Total power requirement: 78 kVA Machine weight: approx. 27.0 t Space requirement: approx. 8.0 x 7.0 x 3.4 m 5-axis CNC universal machining center DECKEL MAHO - DMC 100 U duoBLOCK - Swivel milling head (B-axis) - NC rotary table (C-axis) - Pallet changer - 180-position tool magazine - WITHOUT zero-point clamping system - WITHOUT RINGLER extraction unit - WITHOUT tools

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Hsdpfsu Nc Emsx Af Ieng Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting