CNC šveicariško tipo tekinimo staklės

TORNOS DECO 13A

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000x1260x1950 mm TECHNICAL SPECIFICATIONS Hfsdpfx Afsw T Tcws Ijb 10-axis machine – standard 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool posts: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotary spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating axis for back-working: X4, S5 Bar feeder position: on operator's right Machine center height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. part length: - guide bush machining: 180 mm - collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous), 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous), 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotary Collet for guide bush, type: Meister 605 Number of side tool holders, combined - fixed: 2 x 5 - rotary: 3 + 3 Number of front tool holders, combined - fixed: 4 - rotary: 3 Number of rear tool holders, combined - fixed: 3 + 3 - rotary: 3+3 Tool section: 12x12 mm Standard rotary tool holder: ESX 20 Bar feeder: yes Parts catcher: yes All technical data subject to change without notice, errors and omissions excepted.

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Hfjdovivx Njpfx Af Iob Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: naudotas, CNC long turning automatic lathe TORNOS DECO 13A Hfedpfxeuhhp Ej Af Ieb

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 Hfodpfsuha D Usx Af Isb MAIN SPINDLE - Max. bar diameter: 16 mm - Max. machining length: 184 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 16 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm FRONT STATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm SUB MACHINING - Number of positions: 6 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kVA MACHINE HOURS - Operating hours: 42,762 h EQUIPMENT - Control system: Fanuc PNC DECO - Motorisation of driven tools at: S2, S3, S5, S6 - Driven guide bush - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: Iemca Genius 118 / 32 LL - Coolant container

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Hfjdsvgxfyjpfx Af Isb Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Through-spindle coolant Coolant shower Tool breakage detection in tool changer Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel Machine is delivered with many tools

Sąlyga: naudotas, Gamybos metai: 2007, Didžiausias tekinimo skersmuo 42 / 140 mm Tekinimo ilgis 170 mm Valdymas Mitsubishi Meldas Sūkių dažnis 80-8.000 aps./min C ašis 0,001° Revolverinė galva (x kartų) 2x 12 (VDI 20) varoma Sūkių dažnis 45-4.500 aps./min Velenas 1 kW Perėmimo stotis 42 mm Sūkių dažnis 60-6.000 aps./min C ašis 0,001° Valdomų ašių skaičius 8 Griebtuvo įrenginys 48 DIN 6343 Hedpfxovyli Es Af Iefb Darbo valandos 10 769 h Drožlių transporterio sistema taip / yes, gamybos metai 2018 Bendras galios poreikis 7,5 / 11 kW Staklių svoris apie 3,3 t Užimamas plotas apie 2,4 x 1,6 x 2,2 m CNC tekinimo-frezavimo staklės CITIZEN BOLEY BE 42, pagaminta 2007 m. Simultaniškas darbas su 7 ašimis ant pagrindinio ir perėmimo velenų Labai gera būklė, darbo valandos 21 999 h (2024 m. rugsėjis) Priedai: # įvairūs įrankių laikikliai: 5x ašinių varomų įrankių laikikliai # Griebtuvų korpusas spaudimo griebtuvams, tipas 173E # Papildomas aušinimo skysčio šaldytuvas # Knoll drožlių transporterio sistema, gamybos metai 2018 Boley BE 42 parduodama be strypų padavimo magazino. Yra sąsaja. Visiškas baterijos pakeitimas atliktas 2025-12-22

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Hedpfjvnd Suex Af Ijfb

Sąlyga: labai geros būklės (naudotas), Neu 2008 Umlaufdurchmesser über Bett – 600 mm (Ø 23,62 Zoll) Drehdurchmesser × Bearbeitungslänge – Ø 300 × 600 mm (Ø 11,81 × 23,62 Zoll) Max. Drehdurchmesser – Ø 380 mm (Ø 14,96 Zoll) Max. Verfahrweg Z-/X-Achse – 600 / 240 mm (23,62 / 9,44 Zoll) Z-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min X-Achse: FANUC 2,8 kW (4 PS) / 3.000 U/min Spindelbohrung / Zugrohrdurchmesser – Standard: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04 Zoll); Option: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03 Zoll) Spindeldrehzahl – Standard: 8" Spannfutter 3.500 U/min; Option: 8" Spannfutter 4.500 U/min, 10" Spannfutter 3.500 U/min Spannfutter-Durchmesser – Standard: Ø 8"; Option: Ø 10" Hydraulischer Reitstock – Hub 465 mm (18,3 Zoll), MK 4 VDI-Werkzeugstationen – Option: 8, Standard: 10 Hjdpfsrfx Tnsx Af Iofb Kühlschmierstoffanlage Späneförderer Anschlusswert – 208–220 Volt / 100 Ampere / 3 Phasen / 60 Hz Stellfläche (L × B × H) – 4.080 × 1.675 × 1.842 mm (160,62 × 65,94 × 72,51 Zoll) Gesamtgewicht (ca.) – 5.200 kg (11.440 lbs)

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, CNC Milling Machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Condition: Used Control unit: Heidenhain TNC 426 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Tool holder: ISO 40 Spindle speed: 8,000 rpm Hjdehlp Iwspfx Af Isfb Overall dimensions: L 3,200 x W 2,100 x H 2,900 mm Weight: 6,200 kg Shipping possible throughout Germany and Austria. Surcharge €1,000 Sale excludes warranty.

Gamybos metai: 1990, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 92041, Table clamping surface: 410 x 900 mm Travel paths x/y/z: 560 / 410 / 380 mm Spindle mount: SK 40 Hfjdpfx Aodhhprsf Ieb Spindle speeds: 22 – 6,000 rpm Feed rates: x and z up to 10,000, y up to 240 mm/min Space requirement: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg