Deckel Fp 42 Nc pirkti naudotą (691)

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2, Special Coating in Light Grey with New 3-Axis Digital Readout K+C Technical Data: >> Machine No. 5983, Year of Manufacture approx. 1975 >> Fixed angle table (newly refurbished) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 2.2 kW >> Travel X/Y/Z: 400/200/400 mm >> Features: vertical & horizontal spindle >> Extendable vertical and horizontal quills – SK 40 >> Drawbar system S20x2 >> Weight approx. 1100 kg Accessories and Equipment: Ijdpfx Afsu I Rm No Ijht >> 3-axis digital readout K+C, newly installed with manufacturer’s warranty. Display unit: set reference points, zero points, input of coordinates, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Operating manual for the digital readout >> Coolant unit About the Machine: Offered here is a Deckel FP2 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. The machine was completely disassembled and repainted. Oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes working easier and even more precise. You also receive a 1-year warranty on the new digital readout. Take advantage of the opportunity to view and test the Deckel under power on-site. The machine is available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1979, Deckel FP2 Aktiv universali frezavimo staklė su 3 ašių Heidenhain TNC 111 Aktiv skaitmeniniu indikatoriumi. Staklės yra labai geros būklės, atkeliavo iš valstybinio mokymo skyriaus. Standus stalas, SK 40 veleno tvirtinimas, priedai: įvairūs spaustukai ir frezavimo kotai, atrama. Labai gera, eksploatacijai paruošta būklė. Galima parodyti prijungus prie elektros pagal susitarimą. Ihedpfxoxyhmvo Af Iet

Sąlyga: naudotas, Universalioji frezavimo staklė DECKEL FP1 Eigos X: 300 mm Eigos Y: 150 mm Eigos Z: 300 mm Horizontalus ir vertikalus velenas Veleno greitis: nuo 40 iki 2000 aps./min. Horizontaliai pasveriama galva Iedpfxjxyymbs Af Ieht Veleno variklis: 2 greičiai Variklis: 1,5 kW Pavaros: X - Z automatinės / Y rankinė Parduodama be stalo, tik su viena Ø 140 mm 4 žandikaulių koncentriška griebtuvėle Įtampa: 380 V Plotis: 1200 mm Gylis: 1200 mm Bendras aukštis: 1600 mm Svoris: apie 900 kg

Gamybos metai: 1980, Sąlyga: paruoštas naudoti (naudotas), Max. rotational speed: 2500 rpm, feed rate: 5–500 mm/min. Ijdpfx Afofdzzye Ieht

Sąlyga: naudotas, Priešgingnis ir adapteris frezavimo staklėms horizontaliam frezavimui Priešgingnis ir adapteris (priešlaikis) frezavimo staklėms DECKEL (Guolio blokas su kregždės uodegos tvirtinimo adapteriu DECEL FP1 + FP2) Iedpexcbl Dofx Af Isht Tipas 9570 Kregždės uodegos plotis siauras: apie 72 mm Kregždės uodegos plotis platus: apie 88 mm Kregždės uodegos aukštis: apie 15 mm Ilgis (guolio blokas): 133 mm Plotis (guolio blokas): 50 mm Bendras aukštis (guolio blokas): 105 mm Guolio skylė: Ø 17 mm (su bronzine guolių įvore) Ašių atstumas nuo skylės iki kregždės uodegos: apie 82,5 mm (centrinės ašies aukštis) - Adapteris tinka kregždės uodegai ir tvirtinimo paviršiui, pakilimas 22,5 mm iki 105 mm ašies aukščio Bendras ilgis (kregždės uodegos bėgis): 635 mm Svoris: 3,8 kg labai gera būklė

Sąlyga: labai geros būklės (naudotas), mašinos/transporto priemonės numeris: 2300-0053, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 300 mm, stalo ilgis: 1 000 mm, stalo plotis: 520 mm, bendras aukštis: 1 900 mm, bendras ilgis: 1 500 mm, bendras plotis: 1 800 mm, sukimosi greitis (maks.): 200 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 1 000 kg, - Number of table slots: 6 Ihsdpfx Afewdn A Uo Iot EQUIPMENT: - Swivel table - Three-axis digital display (Heidenhain) - New bellows - New handwheels

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout Original Condition!!! Ihodpfx Aju Nvxmof Iet Technical Data: >> Machine No. 56560/08, Year of manufacture approx. 1975 >> Fixed angle table >> Speed: 40 – 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and features: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: For sale is a Deckel FP1 universal milling machine in very good original condition. The Deckel has minimal backlash on the handwheels, and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel onsite under power.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Deckel FP1 Aktiv su 3 ašių Heidenhain skaitmenine indikacija, 3 aktyvios ašys, standus stalas, SK 40 M16 veleno laikiklis. Centrinis tepimas, naudojimo instrukcijos. Geros, darbingos būklės, atvežta iš profesinio mokymo centro. Pagal susitarimą galima parodyti veikiančią. Iedpfx Afexwunzo Ieht

Sąlyga: paruoštas naudoti (naudotas), Max. rotational speed: 2000 rpm, with operating manual. Isdpfx Ajlbmtgjf Ieht

Sąlyga: geras (naudotas), Gamybos metai: 1980, mašinos/transporto priemonės numeris: 4038, X ašies eiga: 290 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 330 mm, tvirtinimo skersmuo: 40 mm, stalo ilgis: 600 mm, stalo plotis: 210 mm, sukimosi greitis (maks.): 2 000 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 700 kg, CONDITION & REMARKS: - This is an actively controlled tool milling machine Iedpfx Afewxpxmj Ieht

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1978, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout K&C, Infinitely Variable Feed, in Light Grey – Excellent Condition Technical Data: >> Year of manufacture: 1978 Machine No.: 2101-0465 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW Iedpfst Aav Iex Af Ijht >> Spindle brake >> Rapid traverse >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle support by 100 mm >> Vertical and horizontal quill - ISO 40 taper >> Drawbar system S20x2 >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout system (K&C), newly installed, with manufacturer's warranty and operating manual. The display unit features: reference points, zero point setting, coordinate input, mm/inch switching, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: Offered is a universal milling machine Deckel FP1 in excellent condition. The machine has very little backlash and all the spindles move smoothly. All bellows are new. On this newer FP1 model, the feed is infinitely variable on two axes, and the machine is also equipped with rapid traverse. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Sąlyga: geras (naudotas), Gamybos metai: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 axes active, fixed table, SK 40 spindle taper, S20x2 spindle mount. Good, operational condition; can be demonstrated under power by prior arrangement. Ihedpjumcmqefx Af Iet

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1985, Funkcionalumas: visiškai funkcionalus, Universal milling machine Deckel FP1 with 3-axis digital readout K&C (new) and infinitely variable feed on 3 axes – Excellent condition Technical Data: >> Year of manufacture: 1985 >> Machine no.: 2102-2867 >> Swiveling-tilting rotary table (newly ground) >> Spindle speeds: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical quill and horizontal quill – SK40 taper >> Clamping system: M16 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout K+C, newly installed, with manufacturer’s warranty and operation manual. Display functions: set reference and zero points, enter coordinates, mm/inch switch, absolute or incremental mode, circle functions, hole patterns, radius milling functions, etc. >> Coolant device >> Operator’s manual, spare parts list About the machine: Ijdpst Aarpofx Af Ijht For sale is a Deckel FP1 universal milling machine, year 1985, in excellent condition. The machine has minimal backlash and all axes move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, plus there is rapid traverse in all axes. Oil change has been performed. Mechanically and electrically inspected. The new digital readout by K&C makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site.

Sąlyga: geras (naudotas), Gamybos metai: 1973, Deckel FP2 universal milling machine with 2-axis Heidenhain digital readout, fixed table, and SK 40 spindle taper. Features a long adjustment (swiveling) milling head. Accessories include various collets and cutter arbors, as well as a tailstock support. The machine is in good, operational condition and can be demonstrated under power by appointment. Ihedoumclaspfx Af Iet

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Digital Readout RSF 2006, Fully Refurbished, TOP Condition Technical Data: >> Machine No. 53819/08 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Motor Power: 1 / 1.5 kW >> Travels X/Y/Z: 300/150/340 mm >> Vertical and Horizontal Quill - ISO 40 taper >> Spindle Brake >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik Iedpfx Aevb Ud Usf Ijht >> Coolant device >> Machine leveling feet About the Machine: Offered is a Deckel FP1 universal milling machine in very good condition. The Deckel has minimal backlash and all spindles move smoothly. An oil change has been performed. The FP1 was completely overhauled by Huttelmaier in 2006 and has seen very little use since. The RSF digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine onsite under power.

Gamybos metai: 1976, Sąlyga: geras (naudotas), Deckel FP1 tool milling machine, equipped with a 3-axis Heidenhain digital readout. The machine was overhauled by FPS several years ago. Features a fixed table, ISO 40 spindle taper vertical and ISO 40 horizontal. Accessories include various collets and milling arbors, tailstock, and additional fittings. The machine is in good operational condition, though the paintwork shows wear. Can be demonstrated under power by arrangement. Isdpfxsrhzcuo Af Ieht

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1984, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine No. 2102-2601 >> Swivel-tilting rotary table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW Ihedpou Racrofx Af Iot >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be shifted 100 mm on spindle carrier >> Vertical quill and horizontal quill – ISO 40 (SK40) >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1984, in excellent condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed in all three axes is infinitely adjustable, and the machine is also equipped with rapid traverse on these axes. The active 3-axis digital readout is a significant advantage. With this Heidenhain path control, you can input dimensions to which the machine will automatically move. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes working easier and even more precise. You are welcome to inspect and test this machine under power on site.

Sąlyga: geras (naudotas), Gamybos metai: 1976, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets, milling arbors, and a tailstock. The machine is in good, operational condition and can be demonstrated under power by arrangement. Iedoxu Uvtopfx Af Isht

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F729 Universal Milling Machine Deckel FP1 with 3-axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very Good CONDITION Technical Data: >> Year of manufacture: 1992 Machine number: 2102-6289 >> Rigid angle table (newly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100mm on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Ihodpfx Afju T D Nrj Ist Offered here is a universal milling machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all lead screws move smoothly. Even at maximum speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes, and also includes rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain path control, dimensions can be entered which the machine then automatically moves to. The FP1 was used in a training workshop, where it was used only occasionally. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take advantage of the opportunity to inspect and test this machine on site under power.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 Ijdeu Nvwvopfx Af Ioht >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition! Isdpfexu Hbhox Af Ijht Technical Data: >> Machine No. 55249/08, Year 2010 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Drive Power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical Quill SK40 and Horizontal Quill SK40 >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis Digital Readout Heidenhain ND 780 >> Hydraulic Vice >> Collets >> Tool Holders >> Cutters >> Operating Manual >> Coolant System About the Machine: Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed - TOP Condition Technical Data: >> Year of manufacture: 1979 Serial No.: 2202-10777 >> Fixed angle table (newly planed) >> Spindle speed: 25 – 2,500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Traversing paths X/Y/Z: 400/220/400 mm >> Vertical milling head can be moved 150mm on the column >> Vertical and horizontal quill - SK40 extendable >> Drawbar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis TNC 113 active digital readout by Heidenhain >> Coolant unit >> Central lubrication About the Machine: Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a government laboratory where it saw only limited use. The machine has minimal play in the handwheels, and all spindle movements operate smoothly. Even at maximum speed, the milling machine runs quietly. On this later FP2 model, feed is infinitely variable on all three axes; the machine also features rapid traverse for each axis. A key advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions for the machine to automatically move to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout allows for easier and more precise operation. Ihsdpfxsuc Ubwe Af Ist Take the opportunity to inspect and test this machine under power on site.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm Iedpfx Aju R D I Sef Ieht >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm Ihsdpfx Afsxu E R Io Iot >> Vertical milling head can be shifted 100 mm on the spindle head >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electrical lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises. The machine is available immediately.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP3 with 3-Axis Digital Display RSF Elektronik Z-530!! Technical Data: Ihsdpfx Afexu E I Ho Ijt >> Year of manufacture: approx. 1975, Machine No. 0681 >> Swiveling-tilting rotary table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable – SK-40 >> Drawbar system M16 >> Weight: approx. 1300 kg Accessories and Features: >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Central lubrication About the Machine: A Universal Milling Machine Deckel FP3 is being offered in good condition. All spindles move smoothly. Most of the bellows are almost new. The swiveling-tilting rotary table is as new. Oil change has been carried out. Mechanically and electrically tested. The digital display makes work easier and more precise. You are welcome to inspect and test the Deckel on site under power. The machine is available immediately!!!