Deckel Fp 1 pirkti naudotą (694)

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit carried out by FA Huttelmaier In very good condition Technical Data: >> Year of manufacture: 1985 Machine No.: 2102-2891 >> Rigid angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head transversely adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant system >> Operating manual, spare parts plan About the Machine: Offered is a Universal Milling Machine Deckel FP1, year of manufacture 1985, in very good condition. The FP1 received an overhaul at Huttelmaier in 2008. The machine has minimal backlash and all lead screws operate smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. On this later FP1 model, the feed is infinitely variable in all three axes, and rapid traverse is also available in these axes. A significant benefit is the active 3-axis digital readout system. With this Heidenhain distance control, you can enter dimensions, which the machine then approaches automatically. The FP1 was located in a training workshop, where it was only used occasionally. Oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this prime example under power on site. Nedpeu Nvwvefx Af Iocl

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 repowered by FPS, Year of Manufacture 2010 with 3-axis Digital Readout Heidenhain ND 780, As New Condition! Technical Data: >> Machine No. 55249/08, Year 2010 >> Fixed Angle Table >> Spindle Speed: 40 - 2000 rpm >> Feed on 2 Axes >> Drive Power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical Quill SK40 and Horizontal Quill SK40 >> Drawbar System S20x2 >> Weight approx. 700 kg Accessories and Equipment: Ncjdpfx Afexu Hbhe Iel >> 3-axis Digital Readout Heidenhain ND 780 >> Hydraulic Vice >> Collets >> Tool Holders >> Cutters >> Operating Manual >> Coolant System About the Machine: Offered is a Universal Milling Machine Deckel FP1 repowered by FPS, in as-new condition. The accessories include hydraulic vice with swivel base, collet tool holder, and cutters. Mechanically and electrically tested. The Heidenhain digital readout ensures easier and more precise operation. Take advantage of the opportunity to view and test the Deckel under power on site. The machine is available immediately.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1987, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed NEARLY NEW CONDITION Technical data: >> Year of manufacture: 1987 Machine No.: 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical quill and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Equipment and accessories: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts list Nsdpfou R D I Ssx Af Iocl About the machine: Offered is a Universal Milling Machine Deckel FP1, year 1987, in like-new original condition. The machine shows minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. This modern FP1 model features infinitely variable feed in three axes and also rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain distance control, you can enter positions that the machine approaches automatically. The FP1 was located in a training workshop where it was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this exceptional machine on site under power.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Active Digital Readout and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes Ncsdpfx Afoxu E R Ie Ijl >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head can be shifted 100 mm on the spindle head >> Vertical and horizontal quill – SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electrical lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine in very good condition, finished in light grey. The machine has very little backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed rate is steplessly adjustable on all three axes and each axis is also equipped with rapid traverse. The active 3-axis digital readout from Heidenhain is a significant advantage. Thanks to this Heidenhain positioning control, you can enter dimensions which the machine automatically moves to. The FP1 was previously located in a training workshop and only occasionally used. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this premium machine under power at our premises. The machine is available immediately.

Sąlyga: geras (naudotas), Gamybos metai: 1985, Deckel FP1 Aktiv su 3 ašių Heidenhain skaitmenine indikacija, 3 aktyvios ašys, standus stalas, SK 40 M16 veleno laikiklis. Centrinis tepimas, naudojimo instrukcijos. Geros, darbingos būklės, atvežta iš profesinio mokymo centro. Pagal susitarimą galima parodyti veikiančią. Njdpoxwunzofx Af Iecl

Sąlyga: geras (naudotas), Gamybos metai: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 axes active, fixed table, SK 40 spindle taper, S20x2 spindle mount. Good, operational condition; can be demonstrated under power by prior arrangement. Ncedpfeumcmqox Af Isl

Gamybos metai: 1976, Sąlyga: geras (naudotas), Deckel FP1 tool milling machine, equipped with a 3-axis Heidenhain digital readout. The machine was overhauled by FPS several years ago. Features a fixed table, ISO 40 spindle taper vertical and ISO 40 horizontal. Accessories include various collets and milling arbors, tailstock, and additional fittings. The machine is in good operational condition, though the paintwork shows wear. Can be demonstrated under power by arrangement. Ncodpfx Aerhzcusf Isl

Sąlyga: paruoštas naudoti (naudotas), Max. rotational speed: 2000 rpm, with operating manual. Nodjlbmtgjpfx Af Ijcl

Sąlyga: naudotas, Priešgingnis ir adapteris frezavimo staklėms horizontaliam frezavimui Priešgingnis ir adapteris (priešlaikis) frezavimo staklėms DECKEL (Guolio blokas su kregždės uodegos tvirtinimo adapteriu DECEL FP1 + FP2) Tipas 9570 Kregždės uodegos plotis siauras: apie 72 mm Kregždės uodegos plotis platus: apie 88 mm Kregždės uodegos aukštis: apie 15 mm Ilgis (guolio blokas): 133 mm Plotis (guolio blokas): 50 mm Bendras aukštis (guolio blokas): 105 mm Guolio skylė: Ø 17 mm (su bronzine guolių įvore) Ašių atstumas nuo skylės iki kregždės uodegos: apie 82,5 mm (centrinės ašies aukštis) - Adapteris tinka kregždės uodegai ir tvirtinimo paviršiui, pakilimas 22,5 mm iki 105 mm ašies aukščio Bendras ilgis (kregždės uodegos bėgis): 635 mm Svoris: 3,8 kg labai gera būklė Njdpfxoxcbl Ds Af Iscl

Sąlyga: geras (naudotas), Gamybos metai: 1980, mašinos/transporto priemonės numeris: 4038, X ašies eiga: 290 mm, Y ašies eiga: 150 mm, Z ašies eigos atstumas: 330 mm, tvirtinimo skersmuo: 40 mm, stalo ilgis: 600 mm, stalo plotis: 210 mm, sukimosi greitis (maks.): 2 000 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 700 kg, CONDITION & REMARKS: - This is an actively controlled tool milling machine Nodpfx Aewxpxmjf Iocl

Sąlyga: naudotas, Universalioji frezavimo staklė DECKEL FP1 Eigos X: 300 mm Eigos Y: 150 mm Eigos Z: 300 mm Horizontalus ir vertikalus velenas Veleno greitis: nuo 40 iki 2000 aps./min. Horizontaliai pasveriama galva Veleno variklis: 2 greičiai Variklis: 1,5 kW Pavaros: X - Z automatinės / Y rankinė Parduodama be stalo, tik su viena Ø 140 mm 4 žandikaulių koncentriška griebtuvėle Įtampa: 380 V Nsdpjxyymbefx Af Ijcl Plotis: 1200 mm Gylis: 1200 mm Bendras aukštis: 1600 mm Svoris: apie 900 kg

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, DECKEL FP1 Aktiv Milling Machine Manufacturer: Deckel Model: FP1 Aktiv Condition: Very good Control type: Conventional Control system: Aktiv HEIDENHAIN TNC X travel: 300 mm Y travel: 160 mm Z travel: 340 mm Tool holder: SK40 Nedpfx Aexnniaef Iecl Spindle speed: 40-2000 rpm Control system: Aktiv HEIDENHAIN TNC Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirement (LxWxH): approx. 1200x1100x1600 mm

Sąlyga: naudotas, Universalus frezavimo staklės DECKEL FP1 Judėjimas X: 300 mm Judėjimas Y: 150 mm Judėjimas Z: 300 mm Horizontalus ir vertikalus velenas Veleno apsukos: nuo 40 iki 2000 aps./min Stalo matmenys: 600 x 210 mm Horizontaliai pakreipiama galva Tiesus stalas Nsdpfx Afsxxpp Ns Iecl Veleno variklis: 2 greičiai Variklis: 1,3 kW Pavaros: X - Z automatinės / Y rankinės Įtampa: 380 V Plotis: 1200 mm Gylis su elektros skydeliu: 1200 mm Aukštis: 1600 mm Svoris: apie 900 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, X ašies eiga: 300 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 340 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, Dear Sir or Madam, We are offering a Deckel FP1 3-axis milling machine (active), equipped with retrofitted safety features. These newer models are fitted with central lubrication, an electric coolant pump, and a brake motor. The control cabinet can be quickly disconnected from the machine thanks to a Harting connector. The safety components are also connected to the cabinet using this connector type, ensuring ease of handling is not compromised. You receive a 12-month warranty on the retrofitted safety devices, which we can offer for any machine type! The electronic spindle guard is adjustable in multiple axes and is designed to prevent access to the work spindle as well as hazards from flying chips, coolant, etc. The electronic spindle safety hood prevents access to the rotating spindle stub and the tool clamping mechanism. Delivery time: On request Year of manufacture: 1989–1992 Machine no.: 2102-xxxx Table: Fixed angle table Travel distances: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Power supply: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2000 rpm Tool holder: SK40 Feed: Infinitely variable, 5–500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: Coolant system, central lubrication, manual, machine mounts, electronic spindle guard, electronic spindle safety hood Our service promise to you: - We are a certified master engineering company - All machines are thoroughly inspected Njdpfx Afeuw Uu No Iscl - All lubricants and, where necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul your selected machine - On request, you can order additional accessories such as tools directly - On request, we can install other accessories such as safety devices - We are happy to handle shipping and/or bring-in logistics for you

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Universal Milling Machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed – very good condition – CE compliant Technical Data: • Year of manufacture: 1992, Machine No. 2102-6209 • Rigid angle table (newly planed) • Spindle speed: 40 - 2000 rpm • Stepless feed in 3 axes • Rapid traverse in 3 axes • Drive power: 1.5 / 1.9 kW • Spindle brake • Travel distances X/Y/Z: 300 / 160 / 340 mm • Vertical milling head can be shifted 100 mm on spindle carrier • Vertical and horizontal quill – SK40 • Drawbar system M16 • Weight approx. 800 kg Ncjdpexdi Ivsfx Af Iol Accessories and Equipment: • 3-axis digital display Heidenhain TNC113 • Coolant system • Machine lamp • Operating manual, spare parts list About the Machine: For sale is a Deckel FP1 universal milling machine, CE compliant and in very good condition. The machine has minimal backlash and all spindles move smoothly. Even at maximum speeds, the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, which makes transport easier. On this newer FP1 model, the feed in all three axes is infinitely variable, and the machine also features rapid traverse on these axes. An important advantage is the active 3-axis digital display. With this Heidenhain distance controller, you can enter dimensions that the machine will move to automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test this machine under power on site.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, Control: 3-axis active contouring control Heidenhain TNC 123 Ncsdpfx Ajv Nqu Ejf Ijl Spindle Speed: 40 - 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque/milling performance Feed Rate: 5 to 500 mm/min, infinitely variable Rapid Traverse: 1.2 m/min Quill: Extendable quill, vertical 60 mm, SK40, M16 draw thread Axes (X/Y/Z): 300/160/340 mm Swivel Table: 600 x 210 mm, max. load 200 kg

Sąlyga: geras (naudotas), Parduodama iš dalies restauruota frezavimo staklė DECKEL FP1 aktiv su 3 ašių Heidenhain skaitmenine indikacija TNC 113 ir dalijimo stalu su trijų žandikaulių griebtuvu. Dėl kompaktiškos konstrukcijos puikiai tinka mažai hobių dirbtuvei ar garažui. Nodpfx Afexmggus Iscl Gamintojas: DECKEL Tipas: FP1 Staklių Nr.: 2102-3314 - Eiga X/Y/Z 300x160x340 mm - Sukimosi greičio diapazonas 40–2000 aps./min - Trys ašys be pakopų reguliuojamu poslinkiu - Greitas poslinkis visose trijose ašyse - Vertikalioji frezavimo galva - 100 mm horizontali eiga - vertikaliai - Horizontalioji frezavimo įranga - 3 ašių Heidenhain skaitmeninis indikatorius TNC113 - Aušinimo sistema - Dalijimo stalas su trijų žandikaulių griebtuvu Bendra galia: 1,9 kW Staklių matmenys (I x P x A): 1,30 x 1,10 x 1,60 m Svoris: apie 850 kg Kaina nurodyta be PVM, atsiėmimas iš sandėlio. Būklė: naudota.

Sąlyga: paruoštas naudoti (naudotas), X ašies eiga: 300 mm, Y ašies eiga: 160 mm, Z ašies eigos atstumas: 340 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, frezos galvos padėtis: SK40, įėjimo įtampa: 400 V, Deckel FP1 2-axis Active Travels: X = 300 mm Y = 160 mm Z = 340 mm Spindle speed: 40–2000 rpm Automatic feed and rapid traverse on X, Y and Z axes. Infinitely variable. Table size: 600 x 260 mm 2-axis Aktiv control, point-to-point operation. Nsdpfx Aevuzg Aef Iscl 3-axis digital readout by Heidenhain. Spindle taper: SK40 Deckel (external thread connection).

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 28670, X-travel: approx. 400 mm y-travel: 150 mm z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 4 T-slot width: 12 mm Spindle speeds: 20 - 2000 rpm Speed range - vertical: 60 - 1200 rpm Speed range - horizontal: 95 - 1900 rpm Spindle speed steps: 12 Ncedpfx Aecxxlief Isl Feed range: 10 - 500 mm/min Feed steps: 10 Spindle taper: MT 4 Vertical quill stroke: 60 mm Total power requirement: 1.7 kW Machine weight approx.: 0.8 t Space requirement approx.: 0.9 x 1.05 x 1.55 m

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 52326/08, x-axis travel: 250 mm y-axis travel: 150 mm z-axis travel: 305 mm Table clamping surface: 600 x 210 mm Spindle speed range: 40 - 2000 rpm Number of spindle speeds: 16 Spindle taper: SK 40 Feed rate: 10 - 500 mm/min Number of feed rates: 16 Swiveling vertical head: +/- 90 degrees Total power requirement: 1.0 / 1.4 kW Machine weight approx.: 0.8 t Space requirements approx.: 1.0 x 1.25 x 0.85 m Universal tool milling machine type Deckel FP1 with: - Swiveling vertical spindle, - Vertical head swivels +/- 90°, - SK40 spindle taper, Ncsdpfx Afecxxrve Ijl - Automatic feeds, - Two-speed (pole-changing) motor, and - Separate control cabinet with main switch.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, padavimo ilgis X ašis: 300 mm, padavimo eiga Y ašimi: 160 mm, padavimo ilgis Z ašis: 320 mm, bendras svoris: 860 kg, Universal Tool Milling Machine Ruhla Type 58 Thiel Duplex 58 Comparable to Deckel FP1 Compact machine with boring quill and automatic feed on all 3 axes including vice New digital readout included with 1 measuring scale Nedpewf Agdsfx Af Iscl Swiveling table ±0–30° Table size 715 x 260mm X-axis: 300mm Y-axis: 160mm Z-axis: 320mm Dimensions (LxWxH) approx. 110 x 110 x 170cm Inspection and testing are welcome.

Sąlyga: geras (naudotas), Deckel FP1 milling machine, manufactured in Germany by Friedrich Deckel AG, Munich. The machine is fully operational and in good working condition. For further information, please do not hesitate to contact us. Nodpfsw Amaiex Af Iocl

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Universal Tool Milling Machine Deckel FP1: Technical specifications: - Travel X-axis: approx. 300 mm - Travel Y-axis: approx. 150 mm - Travel Z-axis: approx. 340 mm - Swivelling angle table - Clamping surface: 260 x 600 mm - T-slots: 5 - T-slot width: 12 mm - Spindle speed range: 20 - 2000 rpm - Speed range – vertical: 60 - 1200 rpm - Speed range – horizontal: 95 - 1900 rpm - Spindle speed steps: 12 - Feed range: 10 - 500 mm/min - Feed steps: 10 - Spindle taper: MK 4 - Vertical quill stroke: 60 mm - Total connected load: 1.7 kW - Machine weight approx.: 0.8 t - Required space approx.: 0.9 x 1.05 x 1.55 m Scope of overhaul: - Complete renewal of the electrics (by a professional, with wiring diagram!) - Cleaning - Polishing of all bare metal surfaces - Repainting - Replacement of various signs - Replacement of all standard parts (screws, handles, levers, handwheels, oil sight glasses, etc.) - Bearing and sealing of the upper gearbox shaft - Sealing of the coolant pump - Conversion of feed axes to safety handwheels - New installation of coolant lines - Adjustment of gibs and axis clamps On request, the machine can be fitted with glass scales on all axes. Nsdpfohv H Spsx Af Iocl The machine can be inspected and tested by appointment. We are also happy to offer machine transport and various accessories.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Produkto tipas Frezavimo staklės Reikalavimai erdvei 1800 x 1700 x 1950 mm CNC valdymas CNC 2102 MPN FP 3 A Bendras ilgis 1700 mm X ašies eiga 500 mm Serijos numeris 2206-0546 Gamintojo numeris FP 3 A Reikalinga galia (kW) 22 kW Bendras plotis 1800 mm Staklių svoris (kg) 1950 kg Funkcija Frezavimas Y ašies eiga 300 mm Nodpeya Iwcjfx Af Iocl Z ašies eiga 400 mm Bendras aukštis 1950 mm Įtampa 380 V Maksimalus suklio greitis (aps./min) 2001 - 2500 aps./min Prekės ženklas DECKEL Prekės ženklas Deckel Maho Gamybos šalis/regionas Vokietija Valdymo tipas CNC Modelis/Tipas FP 3 A Suklio galia 22 kW Pagaminimo metai 1981

Sąlyga: paruoštas naudoti (naudotas), Galima įsigyti CNC 3 ašių universalią frezavimo staklę Deckel (DMG Mori). Eigos X/Y/Z: 1200mm/600mm/500mm, įrankio laikiklis: SK40, sūkių dažnis: 5000 aps./min, pastūma: 10 m/min, greitasis eiga: 10 m/min, stalo matmenys X/Y: apie 1600mm/675mm, didžiausia stalo apkrova: 2000kg. Staklių matmenys X/Y/Z: apie 3300mm/2400mm/2400mm, svoris: apie 7000kg, valdymas: Grundig Dialog 11. Galima apžiūra vietoje. Ncedpfx Aoycwq Djf Isl