Centrinio Šildymo Katilai pirkti naudotą (4 382)

Gamybos metai: 1999, būklė: labai geros būklės (naudotas), darbinis plotis: 620 mm, mašinos/transporto priemonės numeris: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive system is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Very few operating hours (approx. 6,800 hours). Usable heating element surface: width 600mm x depth 400mm Nledpfx Aeykvdlebzec Max. part dimensions: - Max. part width: 620 mm - Max. part depth: 420 mm - Max. part height, top: 350 mm - Max. part height, bottom: 350 mm (combinations of part heights possible, depending on contour) - Max. operating temperature for contact process = 400°C The modular frame construction of the machine enables easy conversion work. The side doors and the front door in the welding area can be easily opened (for uncomplicated changeover work). The automatic safety lift door provides a high level of operator safety. The temperature controllers on the control panel feature actual/target value displays. The operator terminal is a Siemens PLC control panel. Machine control is managed by a Siemens PLC (S7-300 controller). The heating elements are equipped with temperature sensors for temperature regulation and also serve for safety shutoff in case of overheating. The pin systems on the tool mounting surfaces enable reproducible positioning. Advantages of the heating element welding technology: - Safe welding of workpieces with thin or varying wall thicknesses is possible. - Low reject rate due to precise and reproducible weld joints. - Even sensitive parts can be welded thanks to accurate time, temperature, and force control. - Nearly all thermoplastics can be welded using this process. - Different types of plastics can be welded together (compatibility must be checked). Technical data of the machine: - electrical supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 (power cables), each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width approx. 1.22 m - Machine width with control panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth with control panel approx. 2.6 m - Machine height approx. 2.4 m - Machine height with safety door raised approx. 2.85 m (with door open) Weight of the machine: approx. 2.2 t

Būklė: labai geros būklės (naudotas), Here we offer a Heraeus heating and forced-air drying oven. Heraeus Heating and Forced-Air Drying Oven Nsdpfx Ajzdr Dyobzolc Up to 300°C Manufacturer / Model: Heraeus UT 6060 Specifications: - Temperature range: up to 300°C - Net volume: 52 liters - Weight (empty): 53 kg - Internal dimensions: depth 403 mm, width 340 mm, height 380 mm - External dimensions: depth 744 mm, width 535 mm, height 552 mm - Rated voltage: 230V, Rated frequency: 50/60Hz, Rated current: 6.8A, Rated power: 1.50 kW - Includes 2 shelves - Type: UT 66060 - Condition: used - Scope of delivery: (see photo) (Technical data and information are subject to change and errors!) If you have further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Here we offer a SUN-TEC cleanroom technology heating plate. SUN-TEC Cleanroom Technology Heating Plate Cleanroom workstation with heating plate 1600 mm x 1200 mm x 2200 mm Rated voltage: AC 200V 3 phase 50Hz 30A Max. temperature: 200°C Type: Y9AT417 Condition: used Scope of delivery: (See photo) (Subject to changes and errors in the technical data, all details are non-binding!) We are happy to answer further questions for you by phone. Njdpfxjzdqbqj Abzelc

Būklė: geras (naudotas), Gamybos metai: 2015, SAEILO SJ-660/3300 Vadelės ir traukos sraigtinė tekinimo staklės Pagaminimo metai: 2015 3 ašių skaitmeninis indikatorius K&C ARBAH-L Centro atstumas: 3 300 mm Maksimalus centro aukštis: 330 mm Tekinimo skersmuo virš kreiptakių: 660 mm Tekinimo skersmuo virš skersinio stalo: 438 mm Lovo plotis: 400 mm Veleno tvirtinimas: DIN 55029 - Camlock - dydis D1-8 Veleno anga: 82 mm Veleno sukimosi greitis: 15–1 500 aps./min., 12 pakopų Įranga: Trys žnyplės tekinimo griebtuvas SCHUNK, Ø 315 mm Keturių žnyplių tekinimo griebtuvas RÖHM, Ø 315 mm Atrama (luneta) Aušinimo skysčio sistema Multifix plieninio laikiklio galvutė Sukamasis centro smaigalys Staklių apšvietimas Komplektacijoje: Nljdpfxjzfy Uij Abzec 8 vnt. plieninio laikiklio kasetės Eksploatavimo instrukcija Techniniai duomenys ir matmenų planas – žr. PDF. Visi techniniai duomenys, iliustracijos ir turinys yra pateikiami be įsipareigojimų ir be garantijų. Galimi pakeitimai ir klaidos. Visi kiti priedai, matomi nuotraukose ir vaizdo įraše, nėra pardavimo objektas ir nepriklauso šiam paketui. Komplektacija apima tik tuos priedus, kurie yra aiškiai išvardinti čia, užsakymo patvirtinime ir sąskaitoje. FCA (Nemokamai pakrauta į sunkvežimį) D-32457 Porta Westfalica Tik pakuotė Pristatymas iš karto Pardavimas gali būti nutrauktas bet kuriuo metu / mokėjimas iš karto sudarant sandorį

Būklė: labai geros būklės (naudotas), degimo galia 175 kW šilumos galia perduodama orui 140 kW ventiliatoriaus našumas 8900 m³/h kuras: medienos kilmės kietas kuras Nledpfx Asza Dxcsbzoc gamybos metai 2007 svoris 615 kg maitinimas 380 V CE ženklinimas

Būklė: nepatikrintas (naudotas), Funkcionalumas: nepatikrintas, Parduodamos dvi becentrių apvaliųjų šlifavimo staklės. ----- 1* Gamintojas: NOMOCO, modelis: M100 E Gam. Nr. 5069 Metai: 1977 Maksimalus šlifavimo skersmuo: 100 mm Maksimali šlifavimo ilgis: 180 mm Šlifavimo diskai: Ø 400 mm Maksimali šlifavimo disko plotis: 180 mm Nledpfx Abeyc N D Nszsc Svoris: 3 200 kg ----- Gamintojas: NOMOCO, modelis: M100 Gam. Nr. 2338 Metai: 1974 Staklės turi paketų žurnalą, padavimas vyksta ties slankiklio pagalba Staklės pritaikytos įgilinimo šlifavimui Galima perkonfigūruoti tiesiniam šlifavimui. ----- * Apvalumo tikrinimo prietaisas į komplektą neįeina. Staklės atjungtos nuo elektros tinklo, todėl nepavyks parodyti veikiančių. Išvežimas ir pakrovimas tenka pirkėjui. Skiltyje „Dokumentai“ arba elektroniniu paštu pateikus užklausą galite rasti kainas, už kurias staklės parduodamos. Krautuvų pakrovimui nėra, tačiau gali būti suorganizuotas.

Gamybos metai: 2017, būklė: paruoštas naudoti (naudotas), Yra prieinama kombinuota plastiko detalių karštojo kniedijimo ir formavimo linija. Galia: 38 kW, valdymas: PLC, svoris: apie 1850 kg. Dokumentacija prieinama. Galima apžiūra vietoje. Nljdozfp H Iopfx Abzjc

Būklė: geras (naudotas), Metalo apdirbimo priedai TOS - SN / SIU MACH-ID 2969 Nedpfjzdiuxsx Abzolc Gamintojas: TOS Tipas: SN / SIU Pagaminimo metai: 90 Maks. skersmuo 150 Atkreipkite dėmesį: Informacija šiame puslapyje surinkta remiantis mūsų geriausiomis žiniomis ir galimybėmis, taip pat, kiek įmanoma, iš gamintojo. Informacija pateikta gera valia, tačiau tikslumas nėra garantuojamas. Todėl tai nėra garantija ar sutartinės sąlygos. Rekomenduojame patikrinti visą svarbią informaciją.

Būklė: geras (naudotas), Swing diameter over bed: 380 mm Swing diameter over cross slide: 250 mm Turning length: 600 mm Spindle speed: 90 – 1600 rpm Nsdpfxozd Hf Sj Abzolc Centre height: 200 mm Total power requirement: 4.2 kW Machine weight approx.: 1.3 t Space requirements approx.: 2.2 x 0.9 x 1.6 m

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, SPAKO 1000L | Gas Cooking Kettle / Process Kettle Nledpfjy Um Ahox Abzjc Manufacturer: SPAKO Food Machinery Model / Type: Stationary Rectangular Cooking Kettle Working Capacity: 1,000 liters Power Supply / Heating: Gas-fired Construction Material: Stainless and Acid-resistant Steel Dimensions: 2,100 x 1,700 x 1,250 mm The professional cooking kettle by renowned Dutch brand Spako, with a 1,000-liter capacity, is among the most economical and efficient heating solutions dedicated to the large-scale food processing sector. This unit is a key fixture in meat processing plants, butcheries, slaughterhouses, offal processing facilities, as well as in large central kitchens, ready meal factories, and vegetable processing plants. It is designed for scalding sausages, cooking offal, fat rendering, preparing broths, soups, sauces, and tripe in batch processing systems. Gas heating in Spako kettles provides substantial thermal output and enables extremely rapid heating of a full 1,000-liter load to boiling temperature, dramatically reducing process time compared to traditional electric kettles. The thick-bottom design combined with a specialized flame distribution system ensures optimal heat dispersion with no local overheating, greatly minimizing the risk of product scorching. Full-body and lid thermal insulation lowers energy loss to the environment, improving operator comfort in the production area and cutting overall gas consumption.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, GERNAL 2000L | Process Kettle with Hydraulic Tilting (Jacketed Process Kettle) Manufacturer: GERNAL Model / Type: Tilting Process Kettle Working Capacity: 2000 litres Internal Tank Dimensions: Ø 1700 x 1400 mm Overall Dimensions: 2300 x 2500 x 2600 mm Heating Design: Double-jacketed Tilting System: Hydraulic Nodpfx Abjy Umuwszelc Equipment Included: - Control cabinet - Pallet with accessories This giant, industrial process kettle with a capacity of 2,000 litres is an advanced processing device designed for large-scale food production facilities. Such a kettle is a key element of equipment in large meat processing plants, ready-meal factories, fruit and vegetable processing plants, central kitchens, airline catering operations, and in the production of sauces, soups, and culinary bases. The tank construction is based on double jacket heating technology, preventing direct contact between product and heating elements. This ensures perfectly uniform temperature distribution across the entire huge vessel surface (Ø1700 mm) and completely eliminates the risk of burning dense product loads. The primary asset of the machine is its automatic hydraulic tilting system for the working chamber. Advanced actuators powered by an external hydraulic pump smoothly and effortlessly rotate the kettle, enabling instant discharge of the cooked product directly into butchery trolleys or onto further processing and dosing lines.

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 972, temperatūra: 600 °C, vidinis ilgis: 2 500 mm, vidinis plotis: 2 500 mm, vidinis aukštis: 3 500 mm, bendras svoris: 20 000 kg, Kamerų skaičius: 2, kuro tipas: dujos, 1 dalis: WQ-98.98.138/35E Siuntos svoris: 20 000 kg Krosnies duomenys Maks. temperatūra: 600 °C Temperatūros tolygumas: Nuolatinis procesas: ±5 °C Brendimo procesas: ±3 °C Naudingi kameros matmenys Plotis: 2500 mm Ilgis: 2500 mm Aukštis: 3500 mm Pakrovimas Maks. leistinas (brutinis) svoris: 2200 kg Galingumo duomenys Šildymo galia (dujos): 1000 kW Nedpfx Absy H I Szszslc Įdiegta galia: 48 kW Techniniai duomenys Maitinimo įtampa: 3 × 400 V / 50 Hz Išoriniai matmenys Ilgis: 4443 mm Plotis: 8395 mm Aukštis: 7355 mm

Būklė: beveik kaip naujas (naudotas), 230V AC / 400W H 19M Njdjzfyylopfx Abzslc Pritaikymo sritis: Lenhardt/Bystronic ir kt. įmonių staklės Ilgis: 60 mm Skersmuo: 16 mm Svoris: 168 g Būklė: Kaip naujas

Būklė: naudotas, Gamybos metai: 1999, Technical details: Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Turning length: 700 mm Distance between centers: 700 mm Spindle speeds: 55 - 2350 rpm, 8-step mechanical Nodpfxeu Ixw As Abzolc Spindle bore: 50 mm Tailstock quill travel: 120 mm Tailstock quill taper: MT3 Spindle torque: 350 Nm Max. workpiece weight – overhung: 50 kg Total power requirement: 3.0 kVA Machine weight approx.: 0.79 t Machine dimensions approx. LxWxH: 1.6 x 0.9 x 1.4 m 3-jaw chuck Forkardt Ø 200 mm (external clamping) Longitudinal slide travel X-axis: 600 mm; longitudinal feed 0.045 – 0.787 mm/rev in 20 steps; metric threads Cross slide travel Y-axis: 220 mm; cross feed 0.023 – 0.406 mm/rev in 20 steps Compound slide swivels right 60° and left 120° Thread cutting Machine lighting No coolant supply (pre-installed for retrofitting) Accessories: 3 sets of turning jaws 3x Multifix tool holders 2x drill chucks 1x live center 3 machine leveling feet

Būklė: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 280 mm Turning length: 1,500 mm Distance between centers: 1,500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1,250 / 32-1,600 / 36-1,800 - 18 steps rpm Feed range: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 200 mm Total power requirement: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Njdpfxou Ixzne Abzslc Cross slide travel 300 mm, feed 0.015 - 2.8 mm (end position switch clutch not functional, manual shut-off required) Top slide with 4-position tool post Steel plate Ø 705 mm with offset threaded holes

Būklė: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Nodpfou Tq U Iox Abzjlc Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-way tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Būklė: naudotas, Gamybos metai: 1976, Technical Details: Swing diameter over bed: 340 mm Swing diameter over slide: 190 mm Turning length: 800 mm Turning length: facing = 140 mm / cross = 120 mm Centre height over bed: 170 mm Spindle bore: Ø 40 mm Speed range: 25 - 2000 rpm / 20 steps Feeds: longitudinal: 0.028 - 1.0 mm / cross: 0.012 - 0.44 mm Tailstock quill taper: MT3 Tailstock quill travel: 120 mm Total power requirement: 3.0 kW Machine weight approx.: 1.1 t Machine dimensions approx. LxWxH: 2.0 x 0.8 x 1.4 m Nsdpfsva Ertox Abzelc Thread cutting capability: Metric, Whitworth, and module threads Equipment: - 2-way measuring system VISUCONT - 3-jaw chuck Ø 205 mm with internal clamping jaws - Multifix quick-change toolpost - Foot brake - Coolant pump (supply line not included)

Būklė: naudotas, Techniniai duomenys: Nledpewa I Shjfx Abzec Sukimosi skersmuo virš lovos: 560 mm Sukimosi skersmuo virš stumdomos dalies: 280 mm Sukimo ilgis: 2000 mm Centru aukštis: 280 mm Centru atstumas: 1600 mm Darbinio veleno skylė: 65 mm Sūkių diapazonas: 9...1800 / 24 žingsniai aps./min Išilginiai padavimai: 0,025-0,09 mm/apl Skersinis padavimas: 0,012-0,045 mm/apl Grąžto movos eiga: 225 mm Grąžto movos kūgis: MK5 Bendras energijos poreikis: 18 kW Apytikslis įrenginio svoris: 3,8 t Apytiksliai matmenys (IxPxA): 3,7 x 1,6 x 2,05 m Trijų žandikaulių griebtuvas D=320mm Viršutinė slankiojanti dalis pasukama 45° į dešinę ir į kairę

Būklė: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m Nodpjvav Sdefx Abzelc The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Būklė: naudotas, Technical Details: Swing diameter over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Nlsdpfx Abeu Ixy Dszec Speed range: 35 - 1500 / 16 steps rpm Feed range x-axis: 0.04 - 2.4 / 30 steps m/min Tailstock quill travel: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck, 160 mm - Chuck guard - Protection system WxH: 510x400 mm - Multifix tool holder (4 pieces) - Center in tailstock - Top slide pivotable +/-45°, max. travel = 100 mm - Cross slide travel = 300 mm feed - Coolant system pump (without supply piping)

Būklė: naudotas, Gamybos metai: 1960, Technical Details: Swing diameter over bed: 630 mm Swing diameter over cross slide: 320 mm Turning length: 2800 mm Distance between centers: 2800 mm Swing diameter in gap: 700 mm Gap length: 450 mm Spindle bore: 70 mm Machine weight approx.: 4.4 t Machine dimensions approx. (LxWxH): 4.7 x 1.5 x 1.5 m Thread cutting capability Nljdpfx Abou Ix A Eozjc Accessories: 4-jaw chuck different centers gears jaws and small parts steady rest

Būklė: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Njdpfxov A Sqho Abzolc Machine feet CE safety pre-installed

Būklė: naudotas, Gamybos metai: 1970, Technical details: Swing diameter over bed: 325 mm Swing diameter over cross slide: 150 mm Turning length: 1000 mm Nsdpfxou Ixydj Abzjlc Turning length: facing: 165 mm / transverse: 160 mm Centre height over bed: 200 mm Gap length: no gap mm Spindle speed range: 48 - 1,500 / 10-step rpm Work spindle bore: 40 mm Feeds: longitudinal: 0.021...2.34 mm / transverse: 0.09...1.6 mm Tailstock quill taper: MK 4 Tailstock quill stroke: 125 mm Total power requirement: 2.2 kW Approx. machine weight: 1.0 t Machine dimensions approx. LxWxH: 2.1 x 0.7 x 1.2 m Thread cutting possible: Metric, Whitworth and module threads Equipment: - 3-jaw chuck Ø 200mm with internal clamping jaws - Multifix quick-change toolholder - Foot brake - Coolant pump (delivery exclusive)

Būklė: naudotas, Gamybos metai: 1955, Technical details: Swing diameter over bed: 420 mm Swing diameter over cross slide: 240 mm Turning length: 1100 mm Swing diameter in gap: 600 mm Spindle speed range: 24 - 900 / 8 steps rpm Spindle bore: 41 mm Feed range x-axis: 0.0120 - 0.1000 mm/rev Feed range y-axis: 0.0062 - 0.0302 mm/rev Tailstock quill taper: MT 3 Tailstock quill travel: 220 mm Total power requirement: approx. 4.0 kW (not guaranteed) Machine weight approx.: 1.2 t Machine dimensions approx. LxWxH: 2.3 x 0.9 x 1.3 m Equipment: 3-jaw chuck Röhm Ø 200 mm 4-way tool post, swivels 30° right/left Nodpfxou Ix D Aj Abzslc 2x T-slots for copying device Live center

Būklė: naudotas, Gamybos metai: 1951, Technical details: Njdpfx Abeu Ix Hdjzelc Swing diameter over bed: 400 mm Swing diameter over carriage: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. It has been newly rewired and fitted with a new control cabinet. Emergency-stop switch and chuck guard installed 3-jaw chuck Ø 250 mm Live centre Four-way tool post Tool slide swivels approx. 30° to the right/left Taper turning attachment (cone 15° right/left) 4 change gears