Celtic 12 Tekinimo pirkti naudotą (25 481)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 7 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Puma 2600, sukimosi skersmuo virš skersinio stumduko: 630 mm, tekėjimo ilgis: 1 245 mm, tekėjimo skersmuo: 376 mm, veleno skylė: 102 mm, veleno greitis (maks.): 2 800 aps./min, ašies variklio galia: 26 W, įvesties srovės tipas: trifazis, valdiklių gamintojas: FANUC, ašies skaičius: 2, veleno veikimo valandos: 7 800 h, įrankių magazino lizdų skaičius: 12, Įranga: drožlių transporteris, For sale: turning center with sub-spindle and Y-axis. Condition: excellent. Purchased new in mid-2023, the machine is still in operation. It has clocked just under 8,000 hours and produces parts well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for work with a robot: features autodoor, communication signals available. Equipped with parts conveyor and oil mist filter. NOTE: The offer does not include the robot – sale and support with robot integration are possible based on a separate quote. TECHNICAL DATA (according to manufacturer specification): 1) Capacity Swing diameter over bed: 680 mm Swing diameter over cross slide: 630 mm Maximum turning diameter: 376 mm Recommended turning diameter: 315 mm Maximum turning length: 1245 mm Permissible weight (including chuck): In chuck: 500 kg (supported: 1000 kg) Bar diameter in spindle: 102 mm 2) Spindle Chuck: 315 mm Spindle taper: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through-hole: 103 mm Spindle drive motor power (cont./30 min): 26/22/18.5 kW (S3 25%/S6 60%/S1 Cont.) Spindle speed range: 2–800 rpm Max spindle torque: 1123 Nm (15 min S3 15%) Power transmission: belt 3) Sub-spindle Chuck: 175 mm (optionally 210 mm) Spindle: A2#5 ASA Spindle bore: 62 mm Sub-spindle cylinder through-hole: 50 mm (H8) Sub-spindle drive motor power (cont./30 min): 7.5/5.5 kW (30 min/S1 Cont.) Sub-spindle speed range: 0–4500 rpm Max sub-spindle torque (30 min): 85 Nm Power transmission: belt 4) Travels X-axis: 260 mm Hjdex Rqkuopfx Ab Sjni Z-axis: 1350 mm Y-axis: 105 (±52.5) mm B-axis: 1350 mm C-axis 1,2: 360° (in 0.001° increments) Rapid traverse (X/Z/Y/B): 30/30/10/30 m/min C-axis rapid: 200 rpm 5) Bed and saddle Slant bed, inclination angle 30° Bed guideway width (Z): 437 mm Saddle guideway width (X,Y): 321/325 mm Sub-spindle override: 335 mm 6) Tool system Tool holders: BMT 65P Number of tools: 12 Tool dimensions: 25 x 25 mm Max drill diameter: 50/32 mm (main/sub-spindle) Driven tool power: 7.5/1.5 kW (5 min/cont.) Driven tool speed: 5000 rpm Driven tool torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20 mm (option) Turret indexing: 1 station, 0.15 s (1.2 s full station) Max driven tool drilling diameter: φ20 mm/M20 x P2.5 7) Hydraulic system Tank capacity: 20 l Flow rate (60/50Hz): 25/20.8 l/min Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C-axis positioning: 0.0167° Positioning accuracy (X/Z/Y/C): ±0.002/±0.003/±0.003 mm/±0.006° For questions or further information, please send a message or contact us by phone.

Gamybos metai: 2020, būklė: naujas, Krauss Maffei touch panel, latest version for MC5/MC6 spare parts. Width: 37 cm, height: 47 cm, depth: 8 cm. Hnjdpoqvuicsfx Ab Sji

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 15 000 h, Pagrindinė pavara Špindelio apsukų diapazonas: 12 000 Įrankio kūgis: Capto C6 Ašių skaičius: 5 Judėjimas Y ašies eiga: 230 mm Hnedpfx Abex E Eams Sji A ašies eiga: 1550 mm Rušinys Rušinio skersmuo virš lovos: 1000 mm Šis penkiaašis DOOSAN Puma MX2600ST frezavimo-staklės centras pagamintas 2013 metais. Maksimalus tekinimo diametras – Ø 760 mm, detalės ilgis – iki 1540 mm, strypo įvorės talpa – Ø 76 mm. Įrengtas Fanuc 31i-A valdymo sistema, du špindeliai su iki 4000 aps./min. greičiu ir frezavimo špindelis – 12 000 aps./min. Įrankių žurnalas su 80 pozicijų ir drožlių transporteris. Pasinaudokite galimybe įsigyti šį DOOSAN Puma MX2600ST frezavimo-tekinimo centrą. Dėl daugiau informacijos susisiekite su mumis. Taikymo sritys Tekinimas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, Bendrieji duomenys Matmenys plotis: 1270 mm Matmenys gylis: 2630 mm Matmenys aukštis: 1580 mm Staklių svoris: 2500 kg Valdymo blokas Prekės ženklas: FANUC Modelis: nenurodytas Pagrindinė pavara Špindelio sukimosi greitis: 5000 aps./min. Hnedpfx Abox D Scco Soi Špindelio variklio galia: 7,5 kW Ašių skaičius: 6 Šešių ašių ERGOMAT TBC-42 šveicariško tipo tekinimo staklės pagamintos 2012 m. Maksimalus ruošinio diametras – 42 mm, špindelio greitis iki 5000 aps./min. Įrengtos Fanuc 18i-TB Dual Path valdymo sistema, užtikrinančia preciziškumą ir universalumą, 8 įrankių pozicijos ir greitas padavimo judesys iki 30 m/min. Jei ieškote aukštos kokybės tekinimo sprendimo – rekomenduojame rinktis ERGOMAT TBC-42. Susisiekite su mumis dėl daugiau informacijos. Pritaikymo sritys Tekinimas

Būklė: naudotas, Gamybos metai: 1996, Tipas: Daugiavelenis tekinimo staklės Gamintojas: Index Modelis: G200 Pagaminimo metai: 1996 Būklė: Naudota Hedpfx Aboyn Hmxo Ssni Kiekis: 1

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 38 mm, tekinimo skersmuo virš slankiojančio stalo: 320 mm, tekėjimo ilgis: 910 mm, bendras ilgis: 700 mm, bendras plotis: 1 610 mm, bendras aukštis: 1 350 mm, veleno greitis (maks.): 1 650 aps./min, veleno greitis (min.): 65 aps./min, didžiausias metrinės sriegio skersmuo: 6 mm, metrinės sriegio eigos: 23, bendras svoris: 272 kg, trijų žandikaulių griebtuvo skersmuo: 160 mm, The HOBBY 910 G lathe, in its standard configuration, is equipped with a leadscrew and a feed shaft for threading, or for automatic longitudinal and cross feed. The 12-speed gearbox allows rapid spindle speed adjustments—without the need to change the V-belt. Thanks to its compact design and high weight, the machine ensures quiet yet highly precise operation. -Easy and quick spindle speed change via gearbox -High concentricity thanks to precision ball bearings Hnjdpeyn Amnjfx Ab Sji -Powerful drive motor with high torque, spindle speed range 65 – 1650 rpm -Wide range of applications: precision mechanics, vocational training centers, education, etc. -Simple feed adjustment, smooth and precise switching -Robust machine bed with induction-hardened and ground guideways -Machine ideal for machining steel, non-ferrous metals, and plastics -Standard equipment includes a leadscrew for automatic longitudinal and cross feed -Carriage with handwheels and precision graduated scales Technical specifications: Centre distance: 910 mm Centre height: 160 mm Swing over bed: 320 mm Bed width: 160 mm Spindle bore: 38 mm Spindle mount taper: MT 5 Spindle speed (min): 65 rpm Spindle speed (max): 1650 rpm Number of spindle speeds: 12 Longitudinal feed range: 0.087 – 2.049 mm/rev Cross feed range: 0.019 – 0.444 mm/rev Metric threads: (23) 0.25 – 6 mm Imperial threads: 4 – 120 TPI Tailstock quill travel: 75 mm Tailstock taper: MT 3 Motor power: 1.5 kW Motor power S1 100%: 1.1 kW Voltage: 230 V Dimensions (W x D x H): 1610 x 700 x 1350 mm Weight approx.: 272 kg Scope of delivery: 160 mm 3-jaw chuck Cross slide Fixed centres Change gears Four-way tool post LED work lamp Chuck guard Chip tray Leadscrew guard Operation tools Stand/base

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Doosan Puma 300MC C ašis, varomieji įrankiai, C ašis 360° (0,001°) Metai: 2007 Hodpfx Absyrb Ure Soni Fanuc 21iTB su Manual Guide Griebtuvas 12 colių, 315 mm Samchully Veleno skersmuo 102 mm Maks. tekinimo skersmuo 355 mm Ašių eiga: X – 250 mm Z – 680 mm BMT 65 galva Griebtuvas Įrankių zondas Drožlių išmetėjas, vonelė su aušinimo siurbliu Įrankių laikikliai Įrenginio dokumentacija Labai gera būklė

Būklė: labai geros būklės (naudotas), Gamybos metai: 1980, tekėjimo aukštis: 3 100 mm, tekėjimo skersmuo: 4 100 mm, priekinės plokštės skersmuo: 3 600 mm, Lenkiškos gamybos karuselinis tekinimo staklės RAFAMET tipas KCF 400. Staklės geros techninės būklės – prijungtos ir paruoštos darbui. Stalo skersmuo: 3600 mm, tekinimo skersmuo: 4100 mm, tekinimo aukštis: 3100 mm. Hnsdpfx Abeyrz Eqs Sji

Gamybos metai: 1997, veikimo valandos: 54 646 h, būklė: naudotas, Traub TNA500 SN 253 Hjdeyt Slwjpfx Ab Ssni Velenas 2800 aps./min 12-ių įrankių revolveris Yra pavaromi įrankiai Galia 46 kVA

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, CNC Lathe with 4 Guideways | Manufacturer: GURUTZPE | Model: A-1600 4G Year of manufacture: 2007 Maximum versatility for machining heavier workpieces with larger dimensions. Hnjdpsynuaasfx Ab Sei Bedways are prismatic and precision-ground. Condition: Fully operational (normal mechanical wear commensurate with age). Operating hours (as of February 2026): approx. 26,000 h. Machine can be inspected by appointment. TECHNICAL DATA: - Distance between centers: 4,000 mm - Center height: 800 mm - Bed width: 1,350 mm - Spindle bore: 150 mm - Main spindle nose: DIN 55026, type: A15 - Quill diameter (tailstock): 220 mm - Spindle speed: 480 rpm - Workpiece weight: max. 10 t Electrical data: - Main spindle motor power S1: 39 kW - Total installed power: 54 kW - Voltage / Frequency: 400 V, 50 Hz - Phases: 3 EQUIPMENT: - CNC control: SINUMERIK 840D pl - Electronic handwheel - Chip conveyor - CE marking - Documentation No guarantee for completeness and accuracy of technical data or equipment. Subject to prior sale.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 3 450 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 300 mm, tekėjimo ilgis: 525 mm, tekėjimo skersmuo: 356 mm, veleno skylė: 64 mm, veleno greitis (maks.): 4 000 aps./min, Mašina puikios būklės. Pagaminimo metai: 2019. TM8i mašinos specifikacija Pjūviai ir darbo sritis Atstumas tarp centrų: 597 mm Skersmuo virš staklių lovos: 525 mm Skersmuo virš skersinio vežimo: 300 mm Didžiausias tekinimo skersmuo: 356 mm Didžiausias tekinimo ilgis: 525 mm Maksimalus strypo skersmuo: 64 mm X / Z ašių eiga: 203 / 550 mm Velenas Maksimalus veleno greitis: 4000 aps./min Maksimalus sukimo momentas (aukšta pavara): 133,83 ft·lbs prie 1000 aps./min (100,7 Nm prie 1000 aps./min) Veleno galia: 25,48 AG (19 kW) Veleno galva: A2-6 Griebtuvo skersmuo: 210 mm Revolverinė galvutė Įrankių tipas: diskinė su grioveliais Pozicijų skaičius: 12 Indeksavimo laikas (šalia esančios pozicijos): 1,3 s Indeksavimo laikas (tolimiausios pozicijos): 3,6 s Pavaros Greitos X/Z ašių pastumos: 30 m/min Hnedpjyfhynjfx Ab Sei Matmenys Didžiausias užimamas plotas: 4336 × 3114 mm Mašinos aukštis: 2193 mm Mašinos svoris: 4030 kg Ruoinio griebtuvo matmenys 150 × 95 × 70 mm

Būklė: geras (naudotas), Emco Compact 10 tekinimo staklės Pagaminta Austrijoje. Staklės puikios būklės, beveik nenaudotos. Atkelia iš spaustuvės techninės priežiūros dirbtuvių. Nenaudotos gamyboje. Komplekte yra priedai. Hnjdpfxoyl Rz Uj Ab Ssi

Būklė: naujas, Gamybos metai: 2025, OTINUS PROMOTION: 0% LEASING! Don't wait for a better moment – it's now. Otinus machines with financing at no additional cost. A straightforward offer: you only pay the price of the machine. Optimize your taxes in 2026 and choose proven equipment. Contact us for details! CNC Lathe HLC-4055 with Fanuc 0i TF Control Machining range: - Max turning diameter over bed: Φ 560 mm - Max turning diameter over carriage: Φ 320 mm - Maximum turning diameter: Φ 400 mm - Maximum turning length: 548 mm - Distance from spindle center to floor: 980 mm - X-axis travel: 210 mm - Z-axis travel: 610 mm Tool turret: - Turret type: Hydraulic V12 - External tool holder size: 25x25 mm - Internal diameter: Φ 40 mm - Indexing time: Φ 0.55 s Hnjdpfxjwdt Szj Ab Ssi Spindle: - Drive type: Belt drive - Maximum spindle speed: 4500 rpm - Power consumption (15 min): 11/15 kW - Torque (15 min): 140/250 Nm - Spindle nose: JISA2-6 - Spindle through-hole: Φ 76 mm - Max workpiece diameter: Φ 50 mm - Front spindle bearing diameter: Φ 100 mm - Spindle diameter: 208 mm Feed rates: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - Servo motor power X/Z: 1.8/1.8 kW Tailstock: - Quill diameter: Φ 100 mm - Center type: MT NO.4 - Quill stroke: 120 mm - Travel: 410 mm Other parameters: - Control: FANUC - Power supply: 25 kVA - Coolant tank capacity: 200 l - Machine weight: 4.5 t - Dimensions [length × width × height]: 4200×2050×1850 mm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 8 977 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: MM0008-000192, tekėjimo ilgis: 1 020 mm, tekėjimo skersmuo: 540 mm, ašies variklio galia: 22 W, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 76 mm, X ašies eiga: 565 mm, Y ašies eiga: 170 mm, Z ašies eigos atstumas: 1 050 mm, greitas poslinkis X ašimi: 36 m/min, greitas poslinkis Y ašis: 26 m/min, greitasis eiga Z ašyje: 36 m/min, sukimosi greitis (maks.): 12 000 aps./min, įvesties srovės tipas: trifazis, strypo praėjimas: 76 mm, bendras aukštis: 2 805 mm, bendras ilgis: 4 850 mm, įvorės išorinis skersmuo: 210 mm, bendras plotis: 2 525 mm, Strypo skersmuo (maks.): 65 mm, sūpynės skersmuo virš skersinio vežimo: 270 mm, veleno nosis: A2#6, sūpynės skersmuo virš skersinio stumdomo: 750 mm, bendras svoris: 12 000 kg, sūpynės skersmuo virš viršutinio slankiklio: 540 mm, ašies skersmuo: 110 mm, Įranga: dokumentacija / vadovas, Mastercam DOOSAN PUMA MX2100ST mašinos aplinka Hedpfx Ajxr Utmob Ssni Papildoma Mastercam Mill 3D licencija galima už papildomą kainą Savininkas parduoda 9 ašių DOOSAN MX2100ST tekinimo-frezavimo centrą su FANUC 31i-B valdymu, pagamintą 2020 m., su 750 mm sūpavimu virš lovos ir maksimalia apdirbimo ilgiu 1020 mm. Įrenginys pritaikytas 65 mm skersmens strypų apdirbimui ir turi pilnas Y, A, C1, C2 ir B ašių judesių galimybes universalioms apdirbimo operacijoms. Įmontuotas frezavimo velenas su Capto C6 konusine tvirtinimo sistema, 18,5 kW galia ir 12 000 aps./min., taip pat 40 įrankių sūpuoklinis įrankių keitiklis. Prietaiso techninės būklės ir priežiūros ataskaita gali būti pateikta vietinio tiekėjo užklausus.

Būklė: naudotas, Gamybos metai: 2001, Sukimosi skersmuo 340 mm Sukimosi ilgis 750 mm Hnodpfxsxwdw Ee Ab Sei Valdymas SYSTEM TX 8H Veleno perėjimo skersmuo 80 mm Apskritimo skersmuo virš skersinio stalo 530 mm Apskritimo skersmuo virš lovio 665 mm Pagrindinio veleno greičių diapazonas 3.150 min/-1 Pagrindinio veleno variklio galia 22 kW Įrankių vietų skaičius 12 pozicijų. Mūsų vertinimu, įrenginys yra geros naudotos būklės, apžiūrėti galima prijungus prie elektros pagal susitarimą. Yra 2 įrenginiai. Kaina už vienetą. 1 įrenginys: - Nuotraukos 1-5 - Darbo valandos apie 55.790 h 2 įrenginys: - Nuotraukos 6-10 - Darbo valandos apie 54.347 h Techninės charakteristikos ir priedai: - Y ašis - Priedų paketas su fiksuotais ir varomais įrankių laikikliais - Drožlių transporterio sistema Priedai, darbo įrankiai ir spaustuvai, matomi nuotraukose, į pristatymo komplektą įtraukiami tik jei tai nurodyta papildomoje informacijoje. Techniniai duomenys ir informacija gali būti keičiami, galimi netikslumai. Galimas tarpinis pardavimas!

Būklė: geras (naudotas), Gamybos metai: 2022, veikimo valandos: 1 759 h, tekėjimo ilgis: 530 mm, tekėjimo skersmuo: 320 mm, veleno greitis (maks.): 5 000 aps./min, Strypo skersmuo (maks.): 65 mm, bendras svoris: 5 000 kg, Technical Data Total operating hours: 1,759 h Spindle hours: 1,130 h Control system: DMG MORI SLIMline® multi-touch (19" / Operate SIEMENS) Max. turning diameter: 320 mm Max. turning length: 530 mm Max. bar capacity: 65 mm X-axis travel: 242 mm Y-axis travel: 80 mm Z-axis travel: 540 mm Max. spindle speed: 5,000 rpm Spindle drive power: 16.5 kW Machine weight: approx. 5 t Required floor space: m Standard Equipment Ergonomic control panel: DMG MORI SLIMline® Main spindle: A2-6 with AC motor Power output: 11 / 16.5 kW (100/40% duty cycle), 5,000 rpm 12-station servo turret, VDI 30 mount, with 12 driven tool stations and precise Trifix® coupling (DIN5480) Direct position measuring system: X and Y axis Chip tray Hollow clamping device: max. bar capacity D65 mm Sub spindle: A2-5, implemented as ISM 63 motor spindle with hydraulic chuck, power output 12.6 / 16.2 kW (100/40% duty cycle), 5,000 rpm External electronic handwheel Y-axis: +/- 40 mm DMG MORI loTconnector Special Accessories - Bar package & interface includes: - Part removal device for parts up to D65 x 200 mm, max. workpiece weight 3kg, parts tray located at the front of the machine (outside the work area). - Interface for bar feeder or bar loading device (MG MORI standard interface) - Chip conveyor with right-side discharge instead of chip tray - 4-color signal lamp Hjdpfxeyuy Ens Ab Sjni - Hydraulic 3-jaw chuck SMW KNCS-N 225-66 with quick-change system - HAINBUCH SPANNTOP collet chuck, size 65 - Differential pressure clamping for the sub spindle - External chuck flushing for the sub spindle - Automatic workpiece ejector for the sub spindle with internal coolant supply for chuck flushing - Hydraulic 3-jaw chuck SMWBD-175 for the sub spindle - Coolant system 5-20 bar Option includes: - High-pressure pump, 5-20 bar (adjustable) - Dual cartridge filter for coolant - Coolant spray gun, 5 bar - Preparation for oil mist separator Option includes only the mechanical and electrical pre-installation for AFS 60, diameter: 200 mm - Manual tool measuring device in work area, make: MARPOSS - Automatic short bar loader IEMCA KID80/16, bar capacity D65 Material pushers D=12 mm, D=15 mm, D=21 mm, D=26 mm Interface: DMG MORI standard Guide rails for movement along axis/spindle Color: DMG MORI standard Available functions for bar loader: - Bar feed M69 - Bar changes M65 - Handshake M66 - Part belt conveyor Belt conveyor in front of the machine with left side discharge instead of parts tray. Conveyor outside the working area. All information is provided without guarantee.

Būklė: naudotas, Funkcionalumas: nepatikrintas, Parduodamas Area Cooling Solution agregatas Modelis: APTXN-12; Šaldymo medžiagos kaupiklis AR-10l tipas; Bristol kompresorius Nr. H79A723D8EA OC52; Hnodsyt I N Sjpfx Ab Soi Grynoji kaina: 470 Eur, galima derėtis.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Vertical Turning Lathe - Double Column / Vertical Turning Machine Make: WALDRICH SIEGEN | Year of manufacture: 2018, Commissioned: 2019 High-performance turning and milling unit with modular design for optimal adaptation to customer requirements. Fully hydrostatic guidance of all main axes ensures maximum machining performance and precision. Main components are made of high-performance cast material for optimal damping properties and high rigidity. Condition: Fully functional / Ready for operation. The machine can be inspected by appointment. Total operating hours: 65,432 h TECHNICAL DATA: Portal, clearance width: 6,000 mm Travel paths: - Cross slide horizontal (X1/X2-axis): 5,160 mm - Ram vertical (Z1/Z2-axis): 2,000 mm - Distance X1/X2 (spindle center): min. 2,100 mm - Crossrail vertical (W-axis): 1,800 mm - Measuring system horizontal (X3-axis): 7,065 mm - Measuring system vertical (Z3-axis): 2,350 mm Faceplate: Hjdjynbxcspfx Ab Sjni - Clamping surface diameter: 5,000 mm Rotary table: - Drive power: 2 x 110 kW - Number of gear stages: 2 Slide Spindle drive: - Spindle drive power: 63 kW - Number of gear stages: 2 - Speed range, stage 1: 0 - 600 rpm - Speed range, stage 2: 0 - 3,000 rpm Ram: - Cross-section: 400 x 400 mm Electrical system: - Total connected load: approx. 361 kVA EQUIPMENT: - 2 turning and milling slides - CNC control: SINUMERIK 840D sl - External and internal coolant supply - Chip conveyor (belt filter) - Extraction and filter system, Keller Vario - Probe for workpiece measurement: Renishaw, RMP 60 - Further accessories ... No guarantee for completeness or correctness of technical details and equipment. Detailed technical datasheet and information about the equipment available upon request.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Įrenginys labai geros būklės. Ilgis 7,6 metro, 2 darbo vietos. Galima suteikti iki 6 mėnesių garantiją. Hjdpfx Aeyia Ezob Seni

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 90 mm, tekėjimo skersmuo: 630 mm, tekinimo skersmuo virš slankiojančio stalo: 630 mm, tekinimo skersmuo virš viršutinio vežimo: 380 mm, tekėjimo ilgis: 2 000 mm, bendras ilgis: 3 900 mm, bendras plotis: 1 420 mm, bendras aukštis: 1 590 mm, bendras svoris: 3 400 kg, ruošinio svoris (maks.): 1 500 kg, The FAT TUR 630M/2M universal lathe has been extensively refurbished and modernized by us. It features technical specifications matching the documentation of a new machine, complies with WOT acceptance standards and Polish norms, and also meets EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Order-specific general overhaul within 3 to 3.5 months from order placement. Technical Data: - Centre distance / Turning length: 2000 mm - Swing over bed: 630 mm - Swing over cross slide: 380 mm - Spindle bore: 90 mm - Max. workpiece weight between centres: 1500 kg - Number of spindle speeds: 21 - Speed range (rpm): 18 – 1800 - Feed range (mm/rev): Longitudinal: 0.05 – 3.26 Cross: 0.25 – 1.63 - Motor power: 15 kW Hjdpfjd Ead Tsx Ab Seni - Overall dimensions: Total length: 3900 mm Width: 1420 mm Height: 1500 mm - Total weight: 3400 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and configurations - Digital Read Out for 2 axes, including display, installation and calibration - Steady rest 10–140 mm, with rollers - Steady rest 10–180 mm, with rollers - Steady rest 140–300 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 90 mm, tekėjimo skersmuo: 630 mm, tekinimo skersmuo virš slankiojančio stalo: 630 mm, tekinimo skersmuo virš viršutinio vežimo: 380 mm, tekėjimo ilgis: 3 000 mm, quill skersmuo: 90 mm, bendras ilgis: 4 900 mm, bendras plotis: 1 420 mm, bendras aukštis: 1 590 mm, sukimosi greitis (maks.): 1 800 aps./min, sukimosi greitis (min.): 18 aps./min, bendras svoris: 3 700 kg, ruošinio svoris (maks.): 1 500 kg, veleno tvirtinimas: MK 6, The FAT TUR 630M/3M universal lathe has been comprehensively rebuilt and modernized by us. It features technical specifications that correspond to the technical and operational documentation of a new machine, meets the technical inspection requirements of the WOT and Polish standards, and also complies with EU regulations. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, ready for technical inspection. Technical specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 630 mm - Swing over cross slide: 380 mm - Spindle bore diameter: 90 mm - Maximum workpiece weight between centers: 1500 kg - Number of spindle speeds: 21 - Spindle speed range (rpm): 18 - 1800 - Feed range (mm/rev): Longitudinal: 0.05 – 3.26 Cross: 0.25 – 1.63 - Motor power: 15 kW - Overall dimensions: Overall length: 4900 mm Hsdpjd Eaa Esfx Ab Seni Width: 1420 mm Height: 1500 mm Total weight: 3650 kg Standard equipment: tailstock, coolant pump, chuck guard, toolholder Optional equipment available at additional cost: - 3- or 4-jaw chuck, various diameters and types - Digital Read Out for 2 axes, including display, with installation and calibration - Steady rest 10-140 mm, with rollers - Steady rest 10-180 mm, with rollers - Steady rest 140-300 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, This universal lathe is thoroughly overhauled and modernized by our specialists in our workshop, based on order specifications. The machine fully meets all technical standards and parameters of a comparable new machine of this type. It will be ready for collection within a maximum of 3 to 3.5 months from the customer order date. Warranty: 12 months warranty on the modernized, overhauled machine. Technical Data: TPK 90 - Swing over bed [mm]: 930 mm - Swing over cross slide [mm]: 650 mm - Swing in gap [mm]: 1200 mm - Spindle bore diameter [mm]: 95 mm - Distance between centers [mm]: 10,000 mm - Max. workpiece weight between centers [kg]: 6,000 kg - Max. workpiece weight with 1 steady rest [kg]: 7,500 kg - Max. workpiece weight with 2 steady rests [kg]: 9,000 kg - Number of spindle speeds: 21 - Speed range [rpm]: 8–800 - Number of feeds: 80 Hnsdpskh D Txjfx Ab Sji - Feed range [mm/rev]: longitudinal: 0.1–12.8 - Feed range [mm/rev]: cross: 0.05–6.4 - Machine dimensions [mm]: Length: 12,500 mm Width: 1,800 mm Height: 1,800 mm - Motor power [kW]: 22 - Machine weight [kg]: 11,000 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 8 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TPK-90/6M has been extensively rebuilt and modernized by us. It features technical specifications that match those stated in the technical and operational documentation of a new machine, meets the technical acceptance conditions of the WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Hsdpfxoiwa Ias Ab Seni Availability: Delivery time from 3 to 3.5 months, general overhaul according to customer order. Technical data: - Distance between centers / turning length: 6000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 – 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Total length: 8500 mm - Width: 1800 mm - Height: 1800 mm - Net weight: 8000 kg Standard equipment: Tailstock, coolant pump, chuck guard, toolholder. Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital read out for 2 axes, incl. display, installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 930 mm, tekinimo skersmuo virš slankiojančio stalo: 930 mm, tekinimo skersmuo virš viršutinio vežimo: 650 mm, tekėjimo ilgis: 5 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 800 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 800 aps./min, veleno greitis (min.): 8 aps./min, bendras svoris: 8 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TPK-90/5M has been thoroughly rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance criteria of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: Available from stock, under power, can be inspected at any time Technical data: - Distance between centers / Turning length: 5000 mm - Swing over bed: 930 mm - Swing over cross slide: 650 mm - Swing in gap: 1200 mm - Spindle bore diameter: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Hedpfx Abewk Iq Eo Ssni Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Overall length: 7500 mm Width: 1800 mm Height: 1800 mm - Total weight: 7300 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and versions - Digital Read Out for 2 axes, incl. display, with installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-600 mm, with rollers - MULTIFIX quick-change toolpost

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 120 mm, tekėjimo skersmuo: 1 550 mm, tekinimo skersmuo virš slankiojančio stalo: 1 550 mm, tekinimo skersmuo virš viršutinio vežimo: 1 220 mm, tekėjimo ilgis: 6 000 mm, bendras ilgis: 8 500 mm, bendras plotis: 1 600 mm, bendras aukštis: 1 600 mm, ruošinio svoris (maks.): 15 000 kg, veleno tvirtinimas: MK 6, The universal lathe PORĘBA TR-155B2/6M has been comprehensively rebuilt and modernized by us. It features technical parameters that correspond to the technical and operational documentation of a new machine, meets the technical acceptance conditions of WOT and Polish standards, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrics. Hnedov Ab Dqepfx Ab Sei Availability: Overhaul on order, delivery time 3.5 months from order confirmation. Technical specifications: - Distance between centers/turning length: 6,000 mm - Swing over bed: 1,550 mm - Swing over cross slide: 1,220 mm - Swing in gap: 1,880 mm - Spindle bore diameter: 120 mm - Max. workpiece weight between centers: 9,000 kg - Max. workpiece weight between centers + 1 steady rest: 12,000 kg - Max. workpiece weight between centers + 2 steady rests: 15,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 5 - 630 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.07 – 10 Cross: 0.035 – 5 Top slide: 0.017 – 2.5 - Motor power [kW]: 27/41 (1st gear / 2nd gear) - Overall dimensions: Length: 8,500 mm Width: 2,130 mm Height: 1,550 mm - Overall weight: 14,100 kg Standard equipment: Tailstock, coolant pump, chuck guard, tool holder Optional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and models - Digital Read Out for 2 axes with display, including installation and calibration - Steady rest 40-400 mm, with rollers - Steady rest 400-700 mm, with rollers - Steady rest 450-900 mm, with rollers - MULTIFIX quick-change tool post - Full-length rear safety guard - Inverter including soft-start function and potentiometer for stepless speed control