C200 pirkti naudotą (302)

Sąlyga: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 95 239 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 173937, spaudimo jėga: 2 000 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, formos aukštis (min.): 250 mm, bendras ilgis: 5 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras svoris: 6 630 kg, Įranga: dokumentacija / vadovas, The machine was operating flawlessly up until the day before the arrival of the new machine. Therefore, it is in good used condition. The machine is being sold due to lack of space in the injection molding area and is no longer powered. The pump, injection unit, and clamping unit are all leak-free. The machine manual is available, and videos of the machine are available on request. Pump operating hours: 95,239 Automatic operating hours: 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating Hedpfx Acjv D Nxlsusfn - 12/2022: Ejector sealed. Injection unit sealed, including new piston

Sąlyga: naudotas, The extremely compact and highly maneuverable Nilfisk SC2000 greatly simplifies cleaning tasks. This scrubber-dryer features powerful rear-wheel drive, ensuring comfortable operation. The scrubbing deck and squeegee are automatically controlled by electric actuators. Thanks to fully electronic controls and low energy consumption, the batteries last up to 3.5 hours on a single charge. The water tank has a capacity of 70 liters, allowing the operator to clean large areas. The amount of water is automatically determined by the machine's operating speed, and the scrubbing deck adjusts its rotation speed depending on the degree of floor contamination. As a result, the Nilfisk SC2000 is ideal for cleaning offices, supermarkets, sports halls, hotels, shops, schools, and hospitals. Hfedpfxsu Iv Sws Acuon

Sąlyga: naudotas, Gamybos metai: 2006, Used Trane RTAC 200 air-cooled chiller operating on R134A. Supplied complete with a Trane CHHP0N2TKE0N134A semi-hermetic screw compressor, condenser fitted with 14 fans providing a total air flow of 185,400 m³/h, shell-and-tube evaporator, reinforced heat exchanger, and a control panel equipped with Trane Adaptive controller. Hfjdpfxsrlk E To Acujn

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, The machine consists of: 1. Infeed conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 mm - Power: 2 kW 2. Lifting table Hfjdpovnri Ijfx Acuon - Dimensions: 3200 x 2000 mm - Load capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 mm - Power: 2 kW 4. Vacuum sheet loader for optimization VTSA 3800 - Length: 3200 mm - Infeed speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 mm - Power: 1.5 kW 6. Angle transfer section with rollers and belts KS4 - 5400 - Length: 3200 mm - Width: 2000 mm - Power: 2+2 kW 7. Conveyor belt for sheet alignment on the lateral register PKP - Length: 3000 mm - Power: 4 kW 8. Chain conveyor belt for sheet pinching - Length: 2000 mm - Power: 5.5 kW 9. Camera for material inspection and optimization OK P - Analyses the sheet and sends cutting commands (head cut, tail cut, hole cut, etc., according to operator-set parameters) - Sheet thickness control unit 10. Dough cutting unit - Hydraulic control 11. Waste selection unit (integrated in an under-belt) 12. Splicing unit with hot-melt wire - Number of splicing wires: 6 13. Guillotine for cutting the joined sheets to size - Hydraulic control 14. Stacker for discharging the joined sheets - Length: 3200 mm - Width: 2000 mm - Power: 3 kW 15. Lifting table - Length: 3200 mm - Width: 2000 mm - Load capacity: 5000 kg - Power: 4 kW 16. Conveyor belt for pallet discharge - Length: 3200 mm - Width: 2000 mm - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 mm - Width: 2000 mm - Power: 2 kW 18. Waste discharge conveyor for trim offcuts - Power: 4 kW 19. Mechanical cutter for scrap shredding

Sąlyga: geras (naudotas), Gamybos metai: 2006, Stół o wymiarach 2000 x 510 mm, posuwy XYZ 1660 x 510 x 510 mm, ładowność stołu 1200 kg, stożek wrzeciona DIN 40, prędkość obrotowa wrzeciona 12000 obr./min, magazyn narzędzi na 30 pozycji (ATC), sterowanie Mazatrol 640M, Hfjdewaidlspfx Acujn chłodzenie przez wrzeciono, transporter wiórów, stół obrotowy – oś czwarta.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, *Alle unsere Produkte werden sorgfältig gefertigt und verfügen über 1 Jahr Garantie! *Montage und Bedienerschulung sind KOSTENLOS! Der FTC-200-S Mobile Kegelbrecher (mit Sieb) besteht aus einem Aufgabetrichter, Kegelbrecher, Haldenförderband und Generator. Der FTC-200-S Mobile Kegelbrecher (mit Sieb), welcher per Fernbedienung auf einem Raupenfahrgestell bewegt wird, führt alle vom Bediener gegebenen Befehle zuverlässig aus und kann sich unter allen schwierigen Wetter- und Geländebedingungen auf seinen Ketten bewegen. Der FTC-200-S Mobile Kegelbrecher (mit Sieb) ist präzise konstruiert und hochwertig gefertigt für die Brechung von Steinmaterial und ist mit einer Brechleistung von 100–200 t/h pro Stunde der führende mobile Kegelbrecher der Branche. Der FTC-200-S Mobile Kegelbrecher (mit Sieb) benötigt für den Betrieb keinerlei zusätzliche Infrastruktur, ist per Fernsteuerung vollständig mobil und passt sich allen schwierigen Geländeanforderungen an. Hfodpfx Acsv Uwuieujn TECHNISCHE DATEN: Modell: FTC 200-S Brechertyp: Kegelbrecher Siebgröße: 1300 x 3000 mm Leistung: 100–200 t/h Maximale Aufgabegröße: 185 mm Gesamtanschlusswert: 300 kVA Gewicht: 46.000 kg FÜR WEITERE INFORMATIONEN RUFEN SIE UNS BITTE AN!!!

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, We offer the CC 200, a high-performance CNC machine for the automatic cleaning of corners on PVC profiles, ideal for those seeking precision, speed, and versatility in window and door fabrication. Brand new and ready-to-use, this machine is engineered to ensure fast processing and high-quality results thanks to its CNC system and fully automated management. ✅ Key features: ✔ High-speed CNC system with 2 servo-controlled axes ✔ 7-position tool magazine for quick tool changes ✔ Easy programming via Auto Learning system ✔ Ability to define and store multiple profiles and operations ✔ Suitable for processing standard profiles up to 200 mm ✔ Compact structure and CE-compliant design 📌 Technical data: Hfedsw Av Ntopfx Acuen Power: 7 kW – 380 V / 50 Hz Max stroke: 2100 mm Operating pressure: 6 Bar Weight: 1026 kg Dimensions: 2250 × 2050 × 2050 mm

Sąlyga: labai geros būklės (naudotas),

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 29 189 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 153493, X ašies eiga: 1 660 mm, Y ašies eiga: 510 mm, Z ašies eigos atstumas: 510 mm, valdiklio modelis: Mazatrol 640M, veleno greitis (maks.): 10 000 aps./min, TECHNICAL DETAILS Travel X-Axis: 1,660 mm Travel Y-Axis: 510 mm Travel Z-Axis: 510 mm Control: Mazatrol 640M Rapid traverse: 30,000 mm/min Feed rate: 8,000 mm/min Spindle Spindle taper: 7/24 taper, No. 40 Speed range: 40 - 10,000 rpm Continuous/30 min/10 min power: 7.5 / 11 / 15 kW Table Table size (right/left): 2,000 mm Table size (front/back): 510 mm Number of T-slots: 5 T-slot size (ISO R299): 18 mm T-slot spacing: 100 mm Max. table load: 1,000 kg Distance spindle to table: 180 - 690 mm Spindle center to column: 530 mm Table height: 750 mm MACHINE DETAILS Weight: 9.1 t Hfodpfx Aowixtbecuen EQUIPMENT - Spindle cooling

Gamybos metai: 2025, Sąlyga: visiškai atnaujintas (naudotas), INSPECTED by RSA in 2025 Overhauled, cleaned, and repainted. Replacement of wear parts. Tested at our facility in production conditions prior to shipment. Round: Ø 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting and deburring length: 100 – 1,000 mm A heavy-duty RSA cutting unit model NC2001 equipped with: - Bundle loader, approx. size 600 x 600 mm, useful length approx. 6,200 mm, and max. bundle weight 3,000 kg. - Dual feed rollers - Heavy-duty cutting motor and gearbox, with a 5.5 kW motor; cutting motor speed: 30–250 rpm Hodpfx Acovtpd Tjusfn - CNC up/down movement for precision cutting (latest version, WITHOUT hydraulic system) - Hydraulic regulation in clamping units - 1 fully automatic adjustable length control with CNC stop A RASAPLAN 1000 deburring unit with: - Automatic length adjustment based on cutting length - Synchronized chain conveyor - Integrated dust extraction unit Electrical Features: - Program for short lengths - Special program module for calculating rotary discharge - Siemens OP 17 operator panel - Combined cooling via mist and jet cooling - Servo axes Last serviced: 2024 Round: 8 – 90 mm Rectangular: 10×10 – 75×75 mm Square: 10×15 – 70×80 mm Cutting and deburring length: 100 – 1,000 mm

Sąlyga: naudotas, Gamybos metai: 1987, Technical details: Pressure: 200 t Hjdpfxju Icc Ao Acusfn Bending length: 4000 mm Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70 - 80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table size (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connected load: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (LxWxH): 4.6 x 1.6 x 3.3 m Massive welded steel construction Possible modes of operation: manual, semi-automatic, fully automatic incl. 2 table extensions Rear support 700 mm, motorized travel, and 2 support arms with 1500 mm motorized travel (right/left) Operation via control panel with emergency stop as well as electric foot switch Hydraulics: max. pressure 318 bar; oil filling approx. 170 liters; pump capacity 19.3 l/min Control: DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Tools optional

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feed/automation Hjdoxc E H Sspfx Acujfn Available from 24.08.2024

Sąlyga: naudotas, Gamybos metai: 2006, Technical Details: X-axis travel: 1800 mm y-axis travel: 2000 mm z-axis travel: 1100 mm Pallet table size: 1850 mm Table speed range: max. 200 rpm Table load capacity: 3000 kg Tool holder: HSK 100 Spindle motor: 44 / 32 kW Stepless speed range: 10,000 rpm Number of tool changer stations: 120 Control: 840D powerline FD shopmill classic SIEMENS Transport dimensions (LxWxH): 6.1 x 3.4 x 3.8 m Machine weight approx.: 37 t 5-axis CNC universal milling and turning center, simultaneous operation NC milling and rotary table with pallet carrier D= 1850 mm, Universal milling head with controlled B axis, 2-station linear pallet changer Operating mode 4 Prepared for infrared probe HEIDENHAIN TS 640, BLUM laser in working area, ICS 40 bar, 980-liter tank capacity, with temperature control Internal air blast SinTDI tool management Transmit function DMG Netservice Rinsing gun 2 bar Accuracy package Three-point support for angle heads Tool breakage monitoring Chip conveyor Hfedpfx Acor D Tpfeuon Approx. 131,000 power-on hours, approx. 80,500 spindle hours

Sąlyga: naudotas, Gamybos metai: 1993, Techninė informacija: x eiga: 400 mm y eiga: 300 mm z eiga: 400 mm Veleno greitis: 8000 aps./min Valdymas: Fanuc OM Tvirtinimo stalas: 500x300 mm Žurnalų vietų skaičius: 16 vnt. Įrankio tvirtinimas: SK40 Atstumas tarp darbinio veleno ir tvirtinimo paviršiaus maks.: 50-450 mm Padėklų kiekis: 2 vnt./detalė Hfedpeu Idn Hofx Acuon Bendras galios poreikis: 10 kW Mašinos svoris apytiksliai: 2,5 t Mašinos matmenys (IxPxA): 2,4x1,8x2,5 m Transportavimo matmenys: 2,45x1,8x2,5 m - Elektros spinta - Aušinimo įranga - Drožlių transporterio gamintojas META (transportavimo aukštis 1500 mm; plotis 200 mm) Stalo keitimo funkcija neveikia.

Sąlyga: naudotas, Gamybos metai: 2002, Technical details: Hodpfx Aeruvfkocujfn Swing diameter: 175 mm Turning height: 70 mm Chuck diameter: 175 mm

Sąlyga: naudotas, Gamybos metai: 2016, Technical Details: Swing diameter over bed: 402 mm Swing diameter over cross slide: 245 mm Turning length: 1000 mm Hfodpsvav Sdsfx Acuen Centre distance: 1000 mm Centre height: 200 mm Swing diameter in gap: 560 mm Gap width: 120 mm Spindle speed: 40 - 345 / 345 - 1015 / 1015 - 2800 rpm Feed rate: longitudinal: 0.05 - 0.752 mm/rev + cross: 0.025 - 0.376 mm/rev Spindle bore: Ø 42 mm Tailstock quill taper: ISO MK4 Tailstock quill travel: 180 mm Total power requirement: 4.1 kW Machine weight approx.: 1.2 t Machine dimensions (LxWxH) approx.: 2.4 x 1.0 x 1.7 m The lathe does not have a rapid traverse. Positioning over 2 axes Readout via Pinacho Lathe Controller Multifix toolpost with turning tool Coolant system Foot pedal Thread cutting possible (metric, Whitworth, module, pitch)

Sąlyga: naudotas, Gamybos metai: 1990, Bosch CNC control CC200 spare parts: monitors, cards, controllers, etc. Hsdpfxevk D R Ns Acusfn

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Industrial printer REA JET HR - printer in very good condition - fully operational. We have 3 complete sets with various mounting options. The REA JET HR printer is the most innovative high-resolution marking system for industrial applications. It utilizes Thermal-Ink-Jet (TIJ) technology, as used in millions of office printers. For the first time, it enables maintenance-free printing in your company. The printer does not require filters, regular servicing, and is virtually maintenance-free and fail-safe—only ink is used. Operating and maintenance costs are significantly lower compared to traditional Ink Jet printers. Unlimited industrial application, robust stainless steel housing, IP65 protection rating, and a thoughtfully designed printhead. Intuitive operation thanks to the central control knob with integrated push-button function. Ideal for marking and printing on cartons, boxes, bulk packaging, wood, and paper. Particularly recommended as a “clean” printing technology for the food and pharmaceutical industries. REA JET HR cartridge printer – prints 2D codes, DataMatrix ECC200, Databar, QR Code. Capability for online printing of barcodes, 2D codes (Data Matrix), GS1 codes. Barcode printer supporting formats like EAN 8, EAN 13, EAN 128, Code 128, ITF 14, UPC-E, UPC-A, Code 39, 2/5 code, GS1-128 2D code printer including DataMatrix ECC200, GS1 DataBar Expanded, GS1 DataBar Expanded Stacked, QR Code. Controller The controller is the central component of the REA JET HR printer. Built to high standards, with a robust stainless steel housing and IP65 protection. The controller ensures: • Connection to REA JET HR printheads • Functions as the central operating unit • Communication interfaces: USB, RS232, Ethernet • Operation, configuration, and data transfer from existing systems • Ink level indicator and display of key printing parameters Marking Printhead Hodpfxsxnkrdj Acusfn Intelligent printhead with memory. The smart design offers tangible benefits: • Compact size – only 176 mm long • Simple and convenient cascading of printheads • Reliable cartridge exchange process via locking lever (automatic power cut-off) • Integrated product sensor • Well-engineered mounting options • Printhead can be installed on a special parallelogram support to maintain optimal contact with the product • Information upload/download to the controller (ink level and print parameters) Cartridge REA JET offers over 100 types of ink in HP-TIJ cartridges. Key advantages include: • Every cartridge is equipped with a microchip. • The chip provides several important benefits—not only monitoring ink levels and print parameters, but also offering numerous features for improved daily usability. It ensures a high level of reliability and steady print quality. • When the cartridge is changed (e.g., for a new product type), most information is stored and automatically retrieved when the cartridge is reused, including the remaining print capacity, preventing ink loss.

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, sukimosi greitis (maks.): 10 000 aps./min, garantijos trukmė: 6 mėnesiai, įrankio tipas: SK 40, pavaros tipas: mechaninis, Naujas veleno blokas Kovosvit MAS MCV staklėms, kūgis SK-40, maksimalus greitis 10 000 aps./min. Taip pat siūlome Kessler LC200 (ISO40; 10 000 aps./min.) elektros velenus Kovosvit MAS staklėms – iš karto pristatomi. Hjdpexnzrzjfx Acuefn

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, bendras svoris: 200 kg, Gamybos metai: 2000, spaudimo jėga: 2 t, gerklės gylis: 150 mm, Hydraulic Press Atsugi Model AP-2-M Load Capacity Range: 5–20 kN Hfjdpfx Acovbdyfoujn Stroke (mm): 150 Operating Speed: 60 mm/s Rapid Advance Speed: 73.8 mm/s Ready for Operation Operating Area Open Height: 250 mm Open Depth: 150 mm Table Size: 450x320 mm Motor Specification: 3-phase AC 200V 4-pole 1.5 kW Two-hand operation. Mobile work table Hydraulic Oil / Quantity: Daphni Hydraulic 46 / 6L Total Weight (kg): 200 Dimensions Height (mm): 987 Width (mm): 505 Depth (mm): 735

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, A used four-column punching press MABU with MPC200 control in very good technical condition. Press force, 30° before BDC: 250 kN Hedpouh U Etofx Acuofn Stroke rate, steplessly adjustable: 80–400 strokes/min Stroke adjustment: 7–62 mm Tool holder: Diameter 40H7 x 90 mm Clearance between uprights (front/side): 404/334 mm For further technical data, see PDF document. Technical data and dimensions: subject to change/errors excepted.

Sąlyga: naudotas, Gamybos metai: 2019, maks. svyravimo skersmuo 695 mm maks. apdirbimo skersmuo 235 mm Hfsdpfx Acexnqzlsuen maks. apdirbimo skersmuo 340 mm maks. strypo skersmuo 65 mm veržlės kiaurymė 76 mm maks. verpstės apsukos 5.000 aps./min valdymas: MAZAK SmoothC Revolverio stotys: 12 varomų įrankių sukimosi greitis 4.500 aps./min CNC tekinimo ir frezavimo centras | MAZAK - QT-Compact 200MY L su C ir Y ašimis, 12 pozicijų revolveriu skirtu varomiems įrankiams, atrama, drožlių transporteriu, automatizavimo paketu ir LTA oro filtru Įrenginys yra geros būklės ir gali būti apžiūrimas įjungtas. Daugiau techninės informacijos rasite pridedamame pasiūlyme. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Žymos: QTC200MYL | QTC 200MY L | QT-200MYL

Sąlyga: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 80 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 800 kN, varžto skersmuo: 24 mm, tarpas tarp stulpų: 520 mm, įpurškimo slėgis: 1 950 juosta, injekcijos svoris: 220 g, formos aukštis (min.): 250 mm, išmetimo jėga: 37 N, plokštės ilgis: 760 mm, plokštės plotis: 775 mm, bendras ilgis: 5 400 mm, bendras plotis: 1 400 mm, bendras aukštis: 2 000 mm, bendras svoris: 7 200 kg, galia: 27 kW (36,71 AG), Įranga: dokumentacija / vadovas, - E12 - Euromap 67 - Debitomačiai ir plokšteliniai vamzdynai - Oro vožtuvai: 2 + 2 - Sraigto skersmuo: 40 mm - Užspaudimo jėga: 1.800 kN - Didžiausias šūvio svoris: 155 g - Įpurškimo greitis: 224 cm³/s - Įpurškimo slėgis: 1.950 bar - Įpurškimo tūris: 220 cm³ - Sraigto apsukos: 420 aps./min - Sraigto ilgis/diametras: 24 - Antgalio eiga/jėga maks.: 305 / 28 mm / kN - Maks. formos atidarymo eiga: 1.060 mm - Maks. formos aukštis: 600 mm - Min. formos aukštis: 250 mm - Maks. tarpas tarp plokščių: 1.060 mm - Kaitinimo zonos: 4 - Plokštės dydis (h x v): 760 x 775 mm - Atstumas tarp kolonų (h x v): 520 x 520 mm - Išstūmiklio jėga: 37 kN - Valdymas: CC200 - Darbo valandos: 80.000 Hedpjxlf R Nsfx Acusfn - Didžiausia įdiegta galia: 27 + 9,2 + 4 kW - Svoris: 7.200 kg - Matmenys (ilgis x plotis x aukštis): 5.400 x 1.400 x 2.000 mm.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 180 mm, spaudimo jėga: 5 t, stalo plotis: 450 mm, stalo ilgis: 320 mm, darbinis greitis: 300 mm/s, bendras svoris: 270 kg, įvesties srovės tipas: trifazis, alyvos bako talpa: 9 l, Hydraulic Press Atsugi AP-5-KL Load capacity range: 20–50 kN Stroke (mm): 150 Descent speed (approach speed): 350 mm/s Operating speed (slow speed under pressure): 36 mm/s Return speed: 250 mm/s Ready for operation Working area Open height: 250 mm Open depth: 180 mm Table dimensions: 450 x 50 mm Motor specification: 3-phase AC 200V, 4-pole, 1.5 kW Two-hand operation Mobile worktable Hydraulic oil/type & quantity: Daphni Hydraulic 46 / 9L Total weight (kg): 270 Overall dimensions Height (mm): 986 Width (mm): 485 Hodsvbdpyjpfx Acuofn Depth (mm): 920

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 1991, bendras aukštis: 987 mm, bendras plotis: 505 mm, bendras ilgis: 735 mm, gerklės gylis: 125 mm, spaudimo jėga: 3 t, stalo plotis: 410 mm, stalo ilgis: 320 mm, darbinis greitis: 47 mm/s, alyvos bako talpa: 6 l, įėjimo įtampa: 200 V, ATSUGI 3-ton hydraulic press for sale in like-new condition Atsugi Model AP-3-M Usable load range: 6–30 kN Stroke: 150 mm Operating speed: 46.7 mm/s Approach speed: 56.7 mm/s Two-hand operation Mobile workbench Working area: Open height: 250 mm Open depth: 125 mm Table size: 410 x 320 mm Motor specification: 3-phase AC 200 V, 4P, 1.5 kW Two-hand operation Mobile workbench Hsdpfx Asv Sd Anecuofn Hydraulic oil / volume: 6 liters Total weight: 200 kg Dimensions: Height: 987 mm Width: 505 mm Depth: 735 mm