Bollegraaf pirkti naudotą (12)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, veikimo valandos: 32 169 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 320 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 750 kg, bendras svoris: 22 000 kg, alyvos bako talpa: 900 l, For sale is a complete baling press system consisting of conveyor technology, baler (partially overhauled and tested), and wire stations. Cpedpfeviwdmex Aahsw Technical Data of the Press: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed opening dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput capacity at bulk density: 30 kg/m³ approx. 5.5 t/h 50 kg/m³ approx. 10 t/h 100 kg/m³ approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC control: Telemecanique TSX Micro Machine weight (press): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with de-flaker (wirbulator) 1 maintenance platform with access ladder 2 wire stations with redirect pulleys for 10 wire coil holders (without wire) The following repair and overhaul work has been carried out: Hydraulic oil tank completely drained, cleaned, and refilled with new oil Oil and air filters replaced Partial resealing of hydraulic block Hydraulic hose at hydraulic block replaced Wire mark grooves at floor entry points welded and smoothed Tying system cleaned and serviced Electrical system overhauled, door flap contact switches partially replaced De-flaker (wirbulator) repaired General maintenance performed, lubricated Machine tested during operation without material, in both manual and automatic modes – see function video Notes: The equipment has already been completely dismantled, stored, and is ready for immediate loading. Documentation (manual, CE, electric/hydraulic wiring diagrams) is available. Inspection possible by appointment. We do not assume liability for technical specifications or possible errors.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, veikimo valandos: 34 480 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, balo svoris: 750 kg, bendras svoris: 19 000 kg, transporto aukštis: 3 300 mm, alyvos bako talpa: 750 l, galia: 45 kW (61,18 AG), Technical Data - Baler: Manufacturer: Bollegraaf Model: HBK 100 Cjdsxbgnhopfx Aahepw Year of manufacture: 2004 Operating hours: 34,480 hours Main press force: 100 t Pre-press force max.: 42 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume: 3.15 m³ Theoretical cycle time: 22 seconds Theoretical throughput capacity: up to 450 m³/hour Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates with a bulk density of: - 30 kg/m³: approx. 13 t/hour - 50 kg/m³: approx. 20 t/hour - 100 kg/m³: approx. 30 t/hour Throughput in air separator operation: approx. 20 t/hour Bale weight: 550 to 750 kg, depending on material Hydraulic oil tank volume: 750 L PLC control: Telemecanique TSX Micro Transport dimensions (press only): 10,900 x 2,320 x 3,300 mm (L x W x H) Machine weight (press): approx. 19 t Remarks: Unlike the standard HBC series presses from Bollegraaf, this machine does not have a pre-press flap. Instead, it cuts the material between knives on the press ram and the counter-knife in the frame. Therefore, it is a shear-edge press, similar to those by Paal, unoTech, etc. The press is in very good condition for its age, as it was used exclusively for compacting paper from document destruction. The documentation (operating manual, CE certificate, electrical/hydraulic schematics) is complete. Inspection is possible by appointment. We do not accept liability for technical specifications or possible errors.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Portalinis kranas Bollegraaf, 30 tonų, 32 metrų, kėlimo aukštis 10 metrų Cjdew S Ea Sspfx Aahspw

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2007, veikimo valandos: 22 605 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 400 kg, įėjimo srovė: 238 A, bendras svoris: 36 000 kg, alyvos bako talpa: 1 300 l, For sale is a refurbished baler with 100 t pressing force, large format 1100 x 1100 mm, 75 kW drive power, and a 10-fold cross-tying system. Technical Data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Prepress force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume per press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale dimensions: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a Bulk density of 30 kg/m³: approx. 16 t/h Bulk density of 50 kg/m³: approx. 25 t/h Bulk density of 100 kg/m³: approx. 47 t/h Bale weights up to 1,400 kg, depending on material and bale length Oil tank capacity: approx. 1,300 l PLC: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Baler dimensions assembled with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Remarks: The baler has been partially refurbished, serviced in our workshop, tested after completion, and stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Derusting and partial repainting of the baler Cpedpfx Ajvf E Avjahew - Complete draining of the hydraulic oil tank, replacement of oil and air filters - Refilled with new hydraulic oil - Replaced all hydraulic hoses - Disassembled, overhauled, and reassembled main hydraulic cylinder, two pre-press flap cylinders, and channel press cylinder: honed cylinder tubes, renewed all seal kits, and carried out final pressure test - Dismantled pre-press flap with bearings and bearing brackets. Removed and re-welded 1st and 3rd arc segment - Renewed both bearings on pre-press flap shaft - Renewed upper material retainer on pre-press flap frame - Dismantled the press ram, inspected and replaced both front running wheels - Removed and replaced material retainers and wear profiles on sides and bottom of the press ram - Dismantled, overhauled horizontal and vertical needle and tying units, replaced plastic sliding plates, bearings for twister shafts and wire guide pulleys on the needle heads - Replaced both bronze slide rails left and right in press ram frame cover - Renewed both wire redirect units left and right, incl. bale retention clamps - Fully renewed wire feeding unit incl. hydraulic cylinder under the needle passages - Welded and smoothed out wire grooves on the bottom and side walls of the press channel - General maintenance and service work according to manufacturer’s recommendations - Baler tested in both manual and automatic mode after completion of refurbishment, accepted and stored All technical information is provided without liability for errors or omissions.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: W230-028, spaudimo jėga: 80 t, garantijos trukmė: 24 mėnesiai, slėgis: 250 juosta, galia: 45 kW (61,18 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC80 baler (45 kW) with vertical tying. This baler has already been completely overhauled in our refurbishment workshop. The refurbishment is carried out according to the very strict Bollegraaf OEM Refurbishment Guidelines. Cpodjtvat Tepfx Aahsw After refurbishment, this baler is sold including 2 years warranty. This press is supplied with the following options: * Mounting frames * Intermediate hopper * Bale outlet * Wire spool platforms

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2014, veikimo valandos: 24 967 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 004283-0030, spaudimo jėga: 122 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, garantijos trukmė: 24 mėnesiai, paskutinio kapitalinio remonto metai: 2026, Įranga: dokumentacija / vadovas, This fully refurbished baler is offered by Bollegraaf Recycling Solutions. It concerns a HBC120s baler (90kW) equipped with, among other features, cross-tying (5 vertical wires & 5 horizontal wires). At the time of writing, the baler is undergoing a complete overhaul in our refurbishment workshop. This refurbishment is carried out strictly in accordance with the Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S Volume capacity m³/hour max. - 815 660 500 Bulk density kg/m³ max. - 20 50 100 Throughput capacity T/hour max. - 16.3 33 50 The above capacities apply only when the machine is operated properly and supplied continuously for at least one hour with suitable material. Cedjxcir Espfx Aahspw Bale weight - +/- 1470 kg, depending on, among other factors, material type and bale length Bale length - variable / can be set Bale height - 1100 mm Bale width - 1100 mm Hopper dimensions - 1100 mm x 1600 mm - These dimensions also determine the maximum material size that can be loaded into the machine. Ram pressure force - max. 119.7 ton Pre-press flap pressure force - max. 65 ton Cycle time, excluding wire knotting time - 19 seconds Main motor output - 90 kW (120 HP) Motor Twistomat (knotter) - 1.5 kW (-- HP), SEW Motor counter pressure pump - 1.1 kW (2 HP) Motor needle installation - 7.5 kW (-- HP), SEW Motor oil cooler fan - 3 kW (4 HP) Motor oil cooler pump - 4 kW (5.5 HP) Operating pressure - 315 bar Machine weight - approx. 40,040 kg Number of wires - 5 vertical - 5 horizontal Oil capacity - 1,655 litres Oil brand & grade - BP-SHF-46 Colour - baler RAL 6024 (green) - safety doors RAL 1021 (cadmium yellow) Baler dimensions - length 11,765 mm - width 2,500 mm - height 7,104 mm.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: HBC 140 2x75kW 2001 (210-008-01), spaudimo jėga: 155 t, balo svoris: 1 500 kg, slėgis: 250 juosta, galia: 150 kW (203,94 AG), paskutinio kapitalinio remonto metai: 2024, Įranga: dokumentacija / vadovas, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Pers (2x75kW) Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststofklep Anti-ratten bekabeling Urenstand 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de ‘Bollegraaf OEM Certified Refurbishment Standards’. Dit omvat 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van de revisie Reiniging & demontage Voorafgaand aan de daadwerkelijke revisie wordt de pers volledig gereinigd en in onze revisiewerkplaats gedemonteerd. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en waar nodig opnieuw gelast. Dit geldt ten minste voor de volgende onderdelen: • Presschuif, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de presschuif opnieuw opgelast en voorzien van nieuwe schuifwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en eventuele reparatie- en laswerkzaamheden, worden alle componenten gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en slangen worden vervangen. Codpjtvau Aofx Aahjpw De hydraulische componenten worden opnieuw voorzien van pakkingen. De hydrauliekolie wordt ververst. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitdozen worden vervangen en opnieuw op goed toegankelijke posities geplaatst. Slijtagedelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen voor nieuwe. Cilinders: De cilinders worden opnieuw voorzien van pakkingen en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC kast De schakelkast wordt gecontroleerd en gereinigd. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (bedieningsinterface) worden vervangen door de nieuwste Schneider M340-versie inclusief de meest recente software.

Būklė: naudotas, Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 97020-0010, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, galia: 45 kW (61,18 AG), darbinis slėgis: 250 juosta, Įranga: dokumentacija / vadovas, Šią presavimo mašiną parduoda „Bollegraaf Recycling Solutions“. Tai yra HBC80 (45 kW) presavimo mašina su kryžminiu vielavimu ir grandinine padavimo juosta. Presavimo mašinos pagaminimo metai – 1997 m. Grandinės juostos pagaminimo metai – 2015 m. Presavimo mašina Bollegraaf HBC80, 45 kW Balių matmenys: 1100*720 mm Pagrindinis variklis – 45 kW tarpinis bunkeris Codpsxvh Dyofx Aahjpw juostos įvado vamzdis valdymo spinta Schneider PLC valdiklis Grandininė padavimo juosta Pagaminimo metai – 2015 m. Horizontali dalis – 6000 mm Pakilimo dalis – 12 500 mm (30° kampu) Zwanenhals (gulbės kaklo konstrukcija) Presavimo mašiną galima apžiūrėti veikiant iki kovo pabaigos.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 6 000 h, mašinos/transporto priemonės numeris: 006424, spaudimo jėga: 100 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 600 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 720 mm, garantijos trukmė: 3 mėnesiai, galia: 75 kW (101,97 AG), Įranga: dokumentacija / vadovas, This very recent baler is being offered by Bollegraaf Recycling Solutions. It concerns a HBC100 baler (75kW) equipped with, among others, cross-tying and FULL HARDOX wear plate lining, and a Bollegraaf chain conveyor with Bordoflex protection. Both the chain conveyor and the baler are fitted with all available options for optimal efficiency in baling all types of plastics. Csdpfsxvh Ewox Aahepw Everything was manufactured in 2022 and has very low operating hours. The previous owner has purchased a new Bollegraaf installation and traded in these machines. Following dismantling, this baler will be sold including a 3-month warranty. Baler HBC100K (75kW): - Pressing force: 390 mm press ram height - Intermediary feed hopper - Conveyor feed chute - Working platform with cage ladder - Additional photocells - Frequency inverter for main motor for energy savings - APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) - Cross-tying (3 horizontal and 5 vertical wires) - Full Hardox interior lining in the baler chamber - Bale exit - Hydraulic lifting mechanism for both knotter units for improved accessibility/maintenance - Bale length display - Air conditioning on control cabinet - Frequency inverter for conveyor chain - Hydraulic oil heater - Hydraulic unit oil cooler - 4G modem for remote support Chain Conveyor Bollegraaf HBT 1200/1800*20400: - Equipped with Bordoflex for extra chain protection - Discharge plate for debris - Supports - Chain lubrication system

Gamybos metai: 2022, veikimo valandos: 3 863 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 006682, On behalf of our client, we hereby offer an almost new OI sorting system. Cedjwq D Dnopfx Aahepw This installation can be tested in operation at the client’s site. The machines consist of: OI Sorting: 0050 Bunker conveyor with dosing drum BDF1200/2000*10000 0060 Inclined conveyor to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Platform Caged ladder 0080 Modifications to existing chain belt for paper 0090 Control cabinet included Operating hours only 3,863 In consultation with the client and Bollegraaf, a warranty may be possible under certain conditions. See the attached PDF for a detailed technical specification for each machine.

Būklė: geras (naudotas), Gamybos metai: 1996, Presavimoji su transporterio juosta, vielos krepšeliais, paskirstytoju Markė: Bollegraaf Cjdpfxoxtmyzj Aahepw Tipas: HBC 50A Pagaminimo metai: 1996 Savas svoris: 19 000 kg Transporterio juostos svoris: 6 000 kg Variklio galia: 30 kW Vertikalus surišimas Vielų skaičius: 5

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 25 t, pildymo angos plotis: 800 mm, pildymo angos ilgis: 1 050 mm, ryšulio plotis: 900 mm, ryšulio aukštis: 800 mm, įėjimo įtampa: 400 V, triukšmo lygis: 85 dB, galia: 18,5 kW (25,15 AG), tūrio srautas: 160 m³/val, Bollegraaf HBK25 siūloma Kipre. Įrenginys geros būklės, su grindiniu transportavimo konvejeriu. Galima iš karto naudotis. Techniniai presavimo įrenginio duomenys: Pavaros galia: 18,5 kW Balių matmenys: 800 x 900 x reguliuojama Pakrovimo bunkerio išmatavimai: 1.050 x 800 mm Presavimo jėga: 25 t Našumas: 160 m3/val. (priklausomai nuo medžiagos) Cjdexbdguepfx Aahepw Transporterinės juostos techniniai duomenys (apytiksliai): Ilgis ant grindų: 3.000 mm Įstrižainės ilgis: 5.000 mm